1:35 p.m.
Hi,
I am trying to implement software update provider for firmware updating. I
have done following things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
2. Downloaded URI link
3. Then set success as method, KUint32_Set(&result, 0); KSetStatus(status,
OK); in spec I shall copied herre the body content of response,
<n1:InstallFromURI_OUTPUT> <n1:ReturnValue>0</n1:ReturnValue>
</n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put description
here, for this which method I shall calling.
4. I don't know about CIM_ConcretJob class details. How to fill this class
properties values.
Regards,
George
1:57 a.m.
Hi George
On 24.7.2013 20:35, George varghese wrote:
Hi,
I am trying to implement software update provider for firmware
updating. I have done following things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
2. Downloaded URI link
Maybe I get you wrong. Isn't the provider supposed to download the
package from given URI and install it? Why doing it yourself.
3. Then set success as method, KUint32_Set(&result, 0);
KSetStatus(status, OK); in spec I shall copied herre the body content
of response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue> </n1:InstallFromURI_OUTPUT>
</s:Body> I don't know how to put description here, for this which
method I shall calling.
4. I don't know about CIM_ConcretJob class details. How to fill this
class properties values.
You don't need to use CIM_ConcreteJob at all, if the synchronous
invocation is sufficient. In that case just return "Job Completed with
No Error", "Failed" or any other value < 4096.
All the requirements are listed in Job Control Profile (DSP1103) and
Software Update
profile. For implementation (in python) you may check out our
openlmi-providers/src/python/lmi/common/JobManager.py.
Regards,
George
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
3:32 a.m.
Hi,
On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář <miminar(a)redhat.com> wrote:
Hi George
On 24.7.2013 20:35, George varghese wrote:
Hi,
I am trying to implement software update provider for firmware updating. I
have done following things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
2. Downloaded URI link
>>Maybe I get you wrong. Isn't the provider supposed to download the
package from given URI and install it? >>Why doing it yourself.
2. I described here the code sequence. download the package from the given
URI and install by provider..
3. Then set success as method, KUint32_Set(&result, 0); KSetStatus(status,
OK); in spec I shall copied herre the body content of response,
<n1:InstallFromURI_OUTPUT> <n1:ReturnValue>0</n1:ReturnValue>
</n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description
here, for this which method I shall calling.
4. I don't know about CIM_ConcretJob class details. How to fill this class
properties values.
>>You don't need to use CIM_ConcreteJob at all, if the synchronous
invocation is sufficient. In that case just ??>>return "Job Completed with
No Error", "Failed" or any other value < 4096.
I think the installation process may be asynchronous. That case which class
enumerating for knowing the download status.. .. If user shall initiate
the same process, what is the response value... for this which class I need
to enumerate?
>All the requirements are listed in Job Control Profile (DSP1103)
and
Software Update
>>profile. For implementation (in python) you may check out
our
openlmi->>providers/src/python/lmi/common/JobManager.py.
No, provider implementation should be in C language.
What things we consider for implementing software update provider?
Regards,
George
_______________________________________________
openlmi-devel mailing
listopenlmi-devel@lists.fedorahosted.orghttps://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
4:25 a.m.
On 25.7.2013 10:32, George varghese wrote:
Hi,
On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář <miminar(a)redhat.com>
wrote:
Hi George
On 24.7.2013 20:35, George varghese wrote:
>
> Hi,
>
> I am trying to implement software update provider for firmware
updating. I
have done following things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
> 2. Downloaded URI link
>>Maybe I get you wrong. Isn't the provider supposed to download
the
package from given URI and install it? >>Why doing it yourself.
2. I described here the code sequence. download the package from the
given URI and
install by provider..
> 3. Then set success as method, KUint32_Set(&result, 0);
KSetStatus(status, OK); in spec I shall copied herre the body content of
response, <n1:InstallFromURI_OUTPUT> <n1:ReturnValue>0</n1:ReturnValue>
</n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description here, for this which method I shall calling.
> 4. I don't know about CIM_ConcretJob class details. How
to fill
this class properties values.
>>You don't need to use CIM_ConcreteJob at all, if the
synchronous
invocation is sufficient. In that case just ??>>return "Job
Completed with No Error", "Failed" or any other value < 4096.
I think the installation process may be asynchronous. That case which
class
enumerating for knowing the download status.. .. If user shall
initiate the same process, what is the response value... for this which
class I need to enumerate?
Look here: http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
Search for "PercentComplete" property. You may also provide indications
user can subscribe to.
This way he doesn't need to poll for status. With asynchronous
invocation there are just a few
possible values you can return: "Unspecified Error" (2) or "Method
Parameters Checked - Job Started" (4096).
Return the first one if parameters are invalid or the job could not be
started, otherwise start the job, make instance of CIM_ConcreteJob,
return it as an Out parameter and make 4096 the return value of method.
>>All the requirements are listed in Job Control Profile (DSP1103)
and
Software Update
>>profile. For implementation (in python) you may check out our
openlmi->>providers/src/python/lmi/common/JobManager.py.
No, provider implementation should be in C language.
What things we consider for implementing software update provider?
What optional
features you want to implement (like Ordered Dependencies,
Software Bundles etc.).
What other functionality you are missing in the profile (verification)?
Whether you are content with synchronous methods? - easy to implement.
And when you choose asynchronous, whether to make indications to notify
clients?
How to represent your jobs in separate thread or process?
> Regards,
> George
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
5:21 a.m.
Hi,
What optional features you want to implement (like Ordered
Dependencies,
> Software Bundles etc.).
No. I am trying to implement firmware via http . So I trying to implement
InstallFromURI method. In this method I implement download packages using
CURL library to destination path. Right now I didn't fill CIM_ConcreteJob
instance.
What other functionality you are missing in the profile (verification)?
Need to enumerate current installed firmware revision.For this purpose need
to enumerate instance of CIM_SoftwareIdentity and
CIM_SoftwareInstallationService class. right?
Whether you are content with synchronous methods? - easy to implement.
current implementation firmware installation done by another process. So I
think it should an asynchronous. if it synchronous, take long time for
getting InstallFromURI method response.. right?..
And when you choose asynchronous, whether to make indications to notify
clients?
how to make notification to client. Please give samples about indication.
How to represent your jobs in separate thread or process?
Yes. firmware upgrade process already done, thats in another process . So
we need to query the status to that process .Inter Process
Communication(IPC) . using messsage queue mechanism
Regards,
George
On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář <miminar(a)redhat.com> wrote:
> On 25.7.2013 10:32, George varghese wrote:
> >
> > Hi,
> >
> > On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar@redhat.com><miminar(a)redhat.com>wrote:
> >
> > Hi George
> >
> >
> > On 24.7.2013 20:35, George varghese wrote:
> >>
> >> Hi,
> >>
> >> I am trying to implement software update provider for firmware
> updating. I have done following things.. 1. Created a new instance of
> CIM_SoftwareInstallationService.
> >> 2. Downloaded URI link
> > >>Maybe I get you wrong. Isn't the provider supposed to download
the
> package from given URI and install it? >>Why doing it yourself.
> >
> > 2. I described here the code sequence. download the package from the
> given URI and install by provider..
> >
> >
> >> 3. Then set success as method, KUint32_Set(&result, 0);
> KSetStatus(status, OK); in spec I shall copied herre the body content of
> response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
> </n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description
> here, for this which method I shall calling.
> >> 4. I don't know about CIM_ConcretJob class details. How to fill
> this class properties values.
> >
> > >>You don't need to use CIM_ConcreteJob at all, if the
synchronous
> invocation is sufficient. In that case just ??>>return "Job Completed
with
> No Error", "Failed" or any other value < 4096.
> >
> > I think the installation process may be asynchronous. That case which
> class enumerating for knowing the download status.. .. If user shall
> initiate the same process, what is the response value... for this which
> class I need to enumerate?
> Look here:
> http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
> Search for "PercentComplete" property. You may also provide indications
> user can subscribe to.
> This way he doesn't need to poll for status. With asynchronous invocation
> there are just a few
> possible values you can return: "Unspecified Error" (2) or "Method
> Parameters Checked - Job Started" (4096).
> Return the first one if parameters are invalid or the job could not be
> started, otherwise start the job, make instance of CIM_ConcreteJob, return
> it as an Out parameter and make 4096 the return value of method.
>
> >
> > >>All the requirements are listed in Job Control Profile (DSP1103) and
> Software Update
> >
> > >>profile. For implementation (in python) you may check out our
> openlmi->>providers/src/python/lmi/common/JobManager.py.
> >
> > No, provider implementation should be in C language.
> >
> > What things we consider for implementing software update provider?
> What optional features you want to implement (like Ordered Dependencies,
> Software Bundles etc.).
> What other functionality you are missing in the profile (verification)?
> Whether you are content with synchronous methods? - easy to implement.
> And when you choose asynchronous, whether to make indications to notify
clients?
> How to represent your jobs in separate thread or
process?
>
> >
> >> Regards,
> >> George
> >>
> >>
> >> _______________________________________________
> >> openlmi-devel mailing list
> >> openlmi-devel(a)lists.fedorahosted.org
> >> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
> >
> >
> > _______________________________________________
> > openlmi-devel mailing list
> > openlmi-devel(a)lists.fedorahosted.org
> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
> >
> >
> >
> >
> > _______________________________________________
> > openlmi-devel mailing list
> > openlmi-devel(a)lists.fedorahosted.org
> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
6:21 a.m.
Hi,
I have following questions regarding software update profile,
Qn 1. How to know the software revision and other details
Ans: I think that CIM_SoftwareIdentity class is used for this purpose. Is
it right?
Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
method. Right now I am trying to implement it synchronous.. Later I wish to
change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the status
as downloading
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the installation status? means that which class enumerating for
this purpose?
Please advise me.
Regards,
George
On Thu, Jul 25, 2013 at 3:51 PM, George varghese <georgooty(a)gmail.com>wrote:
Hi,
> What optional features you want to implement (like Ordered Dependencies,
>> Software Bundles etc.).
>
> No. I am trying to implement firmware via http . So I trying to implement
InstallFromURI method. In this method I implement download packages using
CURL library to destination path. Right now I didn't fill CIM_ConcreteJob
instance.
What other functionality you are missing in the profile (verification)?
Need to enumerate current installed firmware revision.For this purpose
need to enumerate instance of CIM_SoftwareIdentity and
CIM_SoftwareInstallationService class. right?
Whether you are content with synchronous methods? - easy to implement.
current implementation firmware installation done by another process. So I
think it should an asynchronous. if it synchronous, take long time for
getting InstallFromURI method response.. right?..
And when you choose asynchronous, whether to make indications to notify
> clients?
how to make notification to client. Please give samples about indication.
How to represent your jobs in separate thread or process?
Yes. firmware upgrade process already done, thats in another process . So
we need to query the status to that process .Inter Process
Communication(IPC) . using messsage queue mechanism
Regards,
George
On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář <miminar(a)redhat.com> wrote:
> On 25.7.2013 10:32, George varghese wrote:
> >
> > Hi,
> >
> > On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar@redhat.com><miminar(a)redhat.com>wrote:
> >
> > Hi George
> >
> >
> > On 24.7.2013 20:35, George varghese wrote:
> >>
> >> Hi,
> >>
> >> I am trying to implement software update provider for firmware
> updating. I have done following things.. 1. Created a new instance of
> CIM_SoftwareInstallationService.
> >> 2. Downloaded URI link
> > >>Maybe I get you wrong. Isn't the provider supposed to download
> the package from given URI and install it? >>Why doing it yourself.
> >
> > 2. I described here the code sequence. download the package from the
> given URI and install by provider..
> >
> >
> >> 3. Then set success as method, KUint32_Set(&result, 0);
> KSetStatus(status, OK); in spec I shall copied herre the body content of
> response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
> </n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description
> here, for this which method I shall calling.
> >> 4. I don't know about CIM_ConcretJob class details. How to fill
> this class properties values.
> >
> > >>You don't need to use CIM_ConcreteJob at all, if the
synchronous
> invocation is sufficient. In that case just ??>>return "Job Completed
with
> No Error", "Failed" or any other value < 4096.
> >
> > I think the installation process may be asynchronous. That case which
> class enumerating for knowing the download status.. .. If user shall
> initiate the same process, what is the response value... for this which
> class I need to enumerate?
> Look here:
> http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
> Search for "PercentComplete" property. You may also provide indications
> user can subscribe to.
> This way he doesn't need to poll for status. With asynchronous invocation
> there are just a few
> possible values you can return: "Unspecified Error" (2) or "Method
> Parameters Checked - Job Started" (4096).
> Return the first one if parameters are invalid or the job could not be
> started, otherwise start the job, make instance of CIM_ConcreteJob, return
> it as an Out parameter and make 4096 the return value of method.
>
> >
> > >>All the requirements are listed in Job Control Profile (DSP1103) and
> Software Update
> >
> > >>profile. For implementation (in python) you may check out our
> openlmi->>providers/src/python/lmi/common/JobManager.py.
> >
> > No, provider implementation should be in C language.
> >
> > What things we consider for implementing software update provider?
> What optional features you want to implement (like Ordered Dependencies,
> Software Bundles etc.).
> What other functionality you are missing in the profile (verification)?
> Whether you are content with synchronous methods? - easy to implement.
> And when you choose asynchronous, whether to make indications to notify
> clients?
> How to represent your jobs in separate thread or process?
>
> >
> >> Regards,
> >> George
> >>
> >>
> >> _______________________________________________
> >> openlmi-devel mailing list
> >> openlmi-devel(a)lists.fedorahosted.org
> >> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
> >
> >
> > _______________________________________________
> > openlmi-devel mailing list
> > openlmi-devel(a)lists.fedorahosted.org
> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
> >
> >
> >
> >
> > _______________________________________________
> > openlmi-devel mailing list
> > openlmi-devel(a)lists.fedorahosted.org
> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
4:28 a.m.
Hi,
Anybody please reply to me.
Regards,
George
On Mon, Jul 29, 2013 at 4:51 PM, George varghese <georgooty(a)gmail.com>wrote:
Hi,
I have following questions regarding software update profile,
Qn 1. How to know the software revision and other details
Ans: I think that CIM_SoftwareIdentity class is used for this purpose.
Is it right?
Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
method. Right now I am trying to implement it synchronous.. Later I wish to
change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the
status as downloading
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the installation status? means that which class enumerating
for this purpose?
Please advise me.
Regards,
George
On Thu, Jul 25, 2013 at 3:51 PM, George varghese <georgooty(a)gmail.com>wrote:
> Hi,
>
>
>
>> What optional features you want to implement (like Ordered
>>> Dependencies, Software Bundles etc.).
>>
>> No. I am trying to implement firmware via http . So I trying to
> implement InstallFromURI method. In this method I implement download
> packages using CURL library to destination path. Right now I didn't fill
> CIM_ConcreteJob instance.
>
> What other functionality you are missing in the profile (verification)?
>
> Need to enumerate current installed firmware revision.For this purpose
> need to enumerate instance of CIM_SoftwareIdentity and
> CIM_SoftwareInstallationService class. right?
>
>
>
>
>
> Whether you are content with synchronous methods? - easy to implement.
>
> current implementation firmware installation done by another process. So
> I think it should an asynchronous. if it synchronous, take long time for
> getting InstallFromURI method response.. right?..
>
> And when you choose asynchronous, whether to make indications to notify
>> clients?
>
> how to make notification to client. Please give samples about indication.
>
>
> How to represent your jobs in separate thread or process?
>
> Yes. firmware upgrade process already done, thats in another process . So
> we need to query the status to that process .Inter Process
> Communication(IPC) . using messsage queue mechanism
>
> Regards,
> George
>
>
> On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář <miminar(a)redhat.com> wrote:
>
>> On 25.7.2013 10:32, George varghese wrote:
>> >
>> > Hi,
>> >
>> > On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar@redhat.com><miminar(a)redhat.com>wrote:
>> >
>> > Hi George
>> >
>> >
>> > On 24.7.2013 20:35, George varghese wrote:
>> >>
>> >> Hi,
>> >>
>> >> I am trying to implement software update provider for firmware
>> updating. I have done following things.. 1. Created a new instance of
>> CIM_SoftwareInstallationService.
>> >> 2. Downloaded URI link
>> > >>Maybe I get you wrong. Isn't the provider supposed to
download
>> the package from given URI and install it? >>Why doing it yourself.
>> >
>> > 2. I described here the code sequence. download the package from the
>> given URI and install by provider..
>> >
>> >
>> >> 3. Then set success as method, KUint32_Set(&result, 0);
>> KSetStatus(status, OK); in spec I shall copied herre the body content of
>> response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
>> </n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description
>> here, for this which method I shall calling.
>> >> 4. I don't know about CIM_ConcretJob class details. How to fill
>> this class properties values.
>> >
>> > >>You don't need to use CIM_ConcreteJob at all, if the
synchronous
>> invocation is sufficient. In that case just ??>>return "Job Completed
with
>> No Error", "Failed" or any other value < 4096.
>> >
>> > I think the installation process may be asynchronous. That case which
>> class enumerating for knowing the download status.. .. If user shall
>> initiate the same process, what is the response value... for this which
>> class I need to enumerate?
>> Look here:
>> http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
>> Search for "PercentComplete" property. You may also provide
indications
>> user can subscribe to.
>> This way he doesn't need to poll for status. With asynchronous
>> invocation there are just a few
>> possible values you can return: "Unspecified Error" (2) or
"Method
>> Parameters Checked - Job Started" (4096).
>> Return the first one if parameters are invalid or the job could not be
>> started, otherwise start the job, make instance of CIM_ConcreteJob, return
>> it as an Out parameter and make 4096 the return value of method.
>>
>> >
>> > >>All the requirements are listed in Job Control Profile (DSP1103)
and
>> Software Update
>> >
>> > >>profile. For implementation (in python) you may check out our
>> openlmi->>providers/src/python/lmi/common/JobManager.py.
>> >
>> > No, provider implementation should be in C language.
>> >
>> > What things we consider for implementing software update provider?
>> What optional features you want to implement (like Ordered Dependencies,
>> Software Bundles etc.).
>> What other functionality you are missing in the profile (verification)?
>> Whether you are content with synchronous methods? - easy to implement.
>> And when you choose asynchronous, whether to make indications to notify
>> clients?
>> How to represent your jobs in separate thread or process?
>>
>> >
>> >> Regards,
>> >> George
>> >>
>> >>
>> >> _______________________________________________
>> >> openlmi-devel mailing list
>> >> openlmi-devel(a)lists.fedorahosted.org
>> >> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>> >
>> >
>> > _______________________________________________
>> > openlmi-devel mailing list
>> > openlmi-devel(a)lists.fedorahosted.org
>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>> >
>> >
>> >
>> >
>> > _______________________________________________
>> > openlmi-devel mailing list
>> > openlmi-devel(a)lists.fedorahosted.org
>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>
>>
>>
>> _______________________________________________
>> openlmi-devel mailing list
>> openlmi-devel(a)lists.fedorahosted.org
>> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>
>>
>
1:14 a.m.
Hi,
I have following questions regarding software update profile, My
understanding, I have added here, please verify it.
Qn 1. I want to enumerate current installed software details.
Ans: I think that CIM_SoftwareIdentity class is used for this purpose. Is
it right?
Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
method. Right now I am trying to implement it synchronous.. Later I wish to
change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the status
as downloading/upgrading.
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the know the firmware installation status? means that which
class enumerating for this purpose?
Ans: I think CIM_ConcreteJob class is used for this purpose. right?
Please advise me.
Regards,
George
On Tue, Jul 30, 2013 at 2:58 PM, George varghese <georgooty(a)gmail.com>wrote:
Hi,
Anybody please reply to me.
Regards,
George
On Mon, Jul 29, 2013 at 4:51 PM, George varghese <georgooty(a)gmail.com>wrote:
> Hi,
>
> I have following questions regarding software update profile,
>
> Qn 1. How to know the software revision and other details
> Ans: I think that CIM_SoftwareIdentity class is used for this purpose.
> Is it right?
>
> Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
> method. Right now I am trying to implement it synchronous.. Later I wish to
> change it asynchronous method.
> Ans: I shall describe the steps here.
> 1. Create the instance of CIM_ConcreteJob class. Fill the
> status as downloading
> 2. Download and install the firmware in system
> 3. Return OK as status.
> Qn3: How to the installation status? means that which class enumerating
> for this purpose?
>
>
> Please advise me.
>
> Regards,
> George
>
>
> On Thu, Jul 25, 2013 at 3:51 PM, George varghese <georgooty(a)gmail.com>wrote:
>
>> Hi,
>>
>>
>>
>>> What optional features you want to implement (like Ordered
>>>> Dependencies, Software Bundles etc.).
>>>
>>> No. I am trying to implement firmware via http . So I trying to
>> implement InstallFromURI method. In this method I implement download
>> packages using CURL library to destination path. Right now I didn't fill
>> CIM_ConcreteJob instance.
>>
>> What other functionality you are missing in the profile (verification)?
>>
>> Need to enumerate current installed firmware revision.For this purpose
>> need to enumerate instance of CIM_SoftwareIdentity and
>> CIM_SoftwareInstallationService class. right?
>>
>>
>>
>>
>>
>> Whether you are content with synchronous methods? - easy to implement.
>>
>> current implementation firmware installation done by another process. So
>> I think it should an asynchronous. if it synchronous, take long time for
>> getting InstallFromURI method response.. right?..
>>
>> And when you choose asynchronous, whether to make indications to
>>> notify clients?
>>
>> how to make notification to client. Please give samples about
>> indication.
>>
>> How to represent your jobs in separate thread or process?
>>
>> Yes. firmware upgrade process already done, thats in another process .
>> So we need to query the status to that process .Inter Process
>> Communication(IPC) . using messsage queue mechanism
>>
>> Regards,
>> George
>>
>>
>> On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář <miminar(a)redhat.com>wrote:
>>
>>> On 25.7.2013 10:32, George varghese wrote:
>>> >
>>> > Hi,
>>> >
>>> > On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar@redhat.com><miminar(a)redhat.com>wrote:
>>> >
>>> > Hi George
>>> >
>>> >
>>> > On 24.7.2013 20:35, George varghese wrote:
>>> >>
>>> >> Hi,
>>> >>
>>> >> I am trying to implement software update provider for firmware
>>> updating. I have done following things.. 1. Created a new instance of
>>> CIM_SoftwareInstallationService.
>>> >> 2. Downloaded URI link
>>> > >>Maybe I get you wrong. Isn't the provider supposed to
download
>>> the package from given URI and install it? >>Why doing it yourself.
>>> >
>>> > 2. I described here the code sequence. download the package from the
>>> given URI and install by provider..
>>> >
>>> >
>>> >> 3. Then set success as method, KUint32_Set(&result, 0);
>>> KSetStatus(status, OK); in spec I shall copied herre the body content of
>>> response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
>>> </n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to put
description
>>> here, for this which method I shall calling.
>>> >> 4. I don't know about CIM_ConcretJob class details. How to
fill
>>> this class properties values.
>>> >
>>> > >>You don't need to use CIM_ConcreteJob at all, if the
>>> synchronous invocation is sufficient. In that case just ??>>return
"Job
>>> Completed with No Error", "Failed" or any other value <
4096.
>>> >
>>> > I think the installation process may be asynchronous. That case which
>>> class enumerating for knowing the download status.. .. If user shall
>>> initiate the same process, what is the response value... for this which
>>> class I need to enumerate?
>>> Look here:
>>> http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
>>> Search for "PercentComplete" property. You may also provide
indications
>>> user can subscribe to.
>>> This way he doesn't need to poll for status. With asynchronous
>>> invocation there are just a few
>>> possible values you can return: "Unspecified Error" (2) or
"Method
>>> Parameters Checked - Job Started" (4096).
>>> Return the first one if parameters are invalid or the job could not be
>>> started, otherwise start the job, make instance of CIM_ConcreteJob, return
>>> it as an Out parameter and make 4096 the return value of method.
>>>
>>> >
>>> > >>All the requirements are listed in Job Control Profile
(DSP1103)
>>> and Software Update
>>> >
>>> > >>profile. For implementation (in python) you may check out
our
>>> openlmi->>providers/src/python/lmi/common/JobManager.py.
>>> >
>>> > No, provider implementation should be in C language.
>>> >
>>> > What things we consider for implementing software update provider?
>>> What optional features you want to implement (like Ordered
>>> Dependencies, Software Bundles etc.).
>>> What other functionality you are missing in the profile (verification)?
>>> Whether you are content with synchronous methods? - easy to implement.
>>> And when you choose asynchronous, whether to make indications to notify
>>> clients?
>>> How to represent your jobs in separate thread or process?
>>>
>>> >
>>> >> Regards,
>>> >> George
>>> >>
>>> >>
>>> >> _______________________________________________
>>> >> openlmi-devel mailing list
>>> >> openlmi-devel(a)lists.fedorahosted.org
>>> >> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>> >
>>> >
>>> > _______________________________________________
>>> > openlmi-devel mailing list
>>> > openlmi-devel(a)lists.fedorahosted.org
>>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>> >
>>> >
>>> >
>>> >
>>> > _______________________________________________
>>> > openlmi-devel mailing list
>>> > openlmi-devel(a)lists.fedorahosted.org
>>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>
>>>
>>>
>>> _______________________________________________
>>> openlmi-devel mailing list
>>> openlmi-devel(a)lists.fedorahosted.org
>>> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>
>>>
>>
>
3:18 a.m.
Hi,
To perform a firmware update have following operations, Also I have
described some steps here.. please advise the directions are correct.
1. View The current firmare inventory of a system
1.1. enumerate the CIM_SoftwareIdentity class.
2. Begin the update process
2.1. Invoke CIM_SoftwareInstallationService.InstallFromURI method.
3. Monior the update process
3.1. In this area, I have no clear idea. How to monitor the update
process?
Please help me, how to monitor the update process. which class I
implementing for it?
Regards,
George
On Wed, Aug 14, 2013 at 11:44 AM, George varghese <georgooty(a)gmail.com>wrote:
Hi,
I have following questions regarding software update profile, My
understanding, I have added here, please verify it.
Qn 1. I want to enumerate current installed software details.
Ans: I think that CIM_SoftwareIdentity class is used for this purpose.
Is it right?
Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
method. Right now I am trying to implement it synchronous.. Later I wish to
change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the
status as downloading/upgrading.
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the know the firmware installation status? means that which
class enumerating for this purpose?
Ans: I think CIM_ConcreteJob class is used for this purpose. right?
Please advise me.
Regards,
George
On Tue, Jul 30, 2013 at 2:58 PM, George varghese <georgooty(a)gmail.com>wrote:
> Hi,
>
> Anybody please reply to me.
>
> Regards,
> George
>
>
> On Mon, Jul 29, 2013 at 4:51 PM, George varghese <georgooty(a)gmail.com>wrote:
>
>> Hi,
>>
>> I have following questions regarding software update profile,
>>
>> Qn 1. How to know the software revision and other details
>> Ans: I think that CIM_SoftwareIdentity class is used for this purpose.
>> Is it right?
>>
>> Qn2 : I want to implement CIM_SoftwareInstallationSerice.InstallFromURI
>> method. Right now I am trying to implement it synchronous.. Later I wish to
>> change it asynchronous method.
>> Ans: I shall describe the steps here.
>> 1. Create the instance of CIM_ConcreteJob class. Fill the
>> status as downloading
>> 2. Download and install the firmware in system
>> 3. Return OK as status.
>> Qn3: How to the installation status? means that which class enumerating
>> for this purpose?
>>
>>
>> Please advise me.
>>
>> Regards,
>> George
>>
>>
>> On Thu, Jul 25, 2013 at 3:51 PM, George varghese
<georgooty(a)gmail.com>wrote:
>>
>>> Hi,
>>>
>>>
>>>
>>>> What optional features you want to implement (like Ordered
>>>>> Dependencies, Software Bundles etc.).
>>>>
>>>> No. I am trying to implement firmware via http . So I trying to
>>> implement InstallFromURI method. In this method I implement download
>>> packages using CURL library to destination path. Right now I didn't fill
>>> CIM_ConcreteJob instance.
>>>
>>> What other functionality you are missing in the profile (verification)?
>>>
>>> Need to enumerate current installed firmware revision.For this purpose
>>> need to enumerate instance of CIM_SoftwareIdentity and
>>> CIM_SoftwareInstallationService class. right?
>>>
>>>
>>>
>>>
>>>
>>> Whether you are content with synchronous methods? - easy to implement.
>>>
>>> current implementation firmware installation done by another process.
>>> So I think it should an asynchronous. if it synchronous, take long time
>>> for getting InstallFromURI method response.. right?..
>>>
>>> And when you choose asynchronous, whether to make indications to
>>>> notify clients?
>>>
>>> how to make notification to client. Please give samples about
>>> indication.
>>>
>>> How to represent your jobs in separate thread or process?
>>>
>>> Yes. firmware upgrade process already done, thats in another process .
>>> So we need to query the status to that process .Inter Process
>>> Communication(IPC) . using messsage queue mechanism
>>>
>>> Regards,
>>> George
>>>
>>>
>>> On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář
<miminar(a)redhat.com>wrote:
>>>
>>>> On 25.7.2013 10:32, George varghese wrote:
>>>> >
>>>> > Hi,
>>>> >
>>>> > On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar@redhat.com><miminar(a)redhat.com>wrote:
>>>> >
>>>> > Hi George
>>>> >
>>>> >
>>>> > On 24.7.2013 20:35, George varghese wrote:
>>>> >>
>>>> >> Hi,
>>>> >>
>>>> >> I am trying to implement software update provider for
firmware
>>>> updating. I have done following things.. 1. Created a new instance of
>>>> CIM_SoftwareInstallationService.
>>>> >> 2. Downloaded URI link
>>>> > >>Maybe I get you wrong. Isn't the provider supposed
to download
>>>> the package from given URI and install it? >>Why doing it
yourself.
>>>> >
>>>> > 2. I described here the code sequence. download the package from
the
>>>> given URI and install by provider..
>>>> >
>>>> >
>>>> >> 3. Then set success as method, KUint32_Set(&result, 0);
>>>> KSetStatus(status, OK); in spec I shall copied herre the body content of
>>>> response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
>>>> </n1:InstallFromURI_OUTPUT> </s:Body> I don't know how to
put description
>>>> here, for this which method I shall calling.
>>>> >> 4. I don't know about CIM_ConcretJob class details. How
to fill
>>>> this class properties values.
>>>> >
>>>> > >>You don't need to use CIM_ConcreteJob at all, if
the
>>>> synchronous invocation is sufficient. In that case just ??>>return
"Job
>>>> Completed with No Error", "Failed" or any other value <
4096.
>>>> >
>>>> > I think the installation process may be asynchronous. That case
>>>> which class enumerating for knowing the download status.. .. If user
>>>> shall initiate the same process, what is the response value... for this
>>>> which class I need to enumerate?
>>>> Look here:
>>>> http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
>>>> Search for "PercentComplete" property. You may also provide
>>>> indications user can subscribe to.
>>>> This way he doesn't need to poll for status. With asynchronous
>>>> invocation there are just a few
>>>> possible values you can return: "Unspecified Error" (2) or
"Method
>>>> Parameters Checked - Job Started" (4096).
>>>> Return the first one if parameters are invalid or the job could not be
>>>> started, otherwise start the job, make instance of CIM_ConcreteJob,
return
>>>> it as an Out parameter and make 4096 the return value of method.
>>>>
>>>> >
>>>> > >>All the requirements are listed in Job Control Profile
(DSP1103)
>>>> and Software Update
>>>> >
>>>> > >>profile. For implementation (in python) you may check
out our
>>>> openlmi->>providers/src/python/lmi/common/JobManager.py.
>>>> >
>>>> > No, provider implementation should be in C language.
>>>> >
>>>> > What things we consider for implementing software update provider?
>>>> What optional features you want to implement (like Ordered
>>>> Dependencies, Software Bundles etc.).
>>>> What other functionality you are missing in the profile (verification)?
>>>> Whether you are content with synchronous methods? - easy to implement.
>>>> And when you choose asynchronous, whether to make indications to
>>>> notify clients?
>>>> How to represent your jobs in separate thread or process?
>>>>
>>>> >
>>>> >> Regards,
>>>> >> George
>>>> >>
>>>> >>
>>>> >> _______________________________________________
>>>> >> openlmi-devel mailing list
>>>> >> openlmi-devel(a)lists.fedorahosted.org
>>>> >>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > openlmi-devel mailing list
>>>> > openlmi-devel(a)lists.fedorahosted.org
>>>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>> >
>>>> >
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > openlmi-devel mailing list
>>>> > openlmi-devel(a)lists.fedorahosted.org
>>>> > https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> openlmi-devel mailing list
>>>> openlmi-devel(a)lists.fedorahosted.org
>>>> https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>>>>
>>>>
>>>
>>
>
11:21 p.m.
On 21.8.2013 10:18, George varghese wrote:
Hi,
To perform a firmware update have following operations, Also I have
described some steps here.. please advise the directions are correct.
1. View The current firmare inventory of a system
1.1. enumerate the CIM_SoftwareIdentity class.
Works fine if you don't have
too many packages to enumerate. The
embedded platform you develop for may prove too limited for this even
for hundreds of packages.
2. Begin the update process
2.1. Invoke CIM_SoftwareInstallationService.InstallFromURI method.
3. Monior the update process
3.1. In this area, I have no clear idea. How to monitor the
update process?
To monitor it, you need to support asynchronous invocations of
InstallFrom* methods. That means you need to have some sort of job
management and run your installation code in separated thread to avoid
concurrency problems when more clients try to start installation process
at the same time. You can read progress from CIM_ConcreteJob instance by
invoking GetInstance() on it -- property PercentComplete.
Please help me, how to monitor the update process. which class I
implementing for it?
Regards,
George
On Wed, Aug 14, 2013 at 11:44 AM, George varghese <georgooty(a)gmail.com
<mailto:georgooty@gmail.com>> wrote:
Hi,
I have following questions regarding software update profile, My
understanding, I have added here, please verify it.
Qn 1. I want to enumerate current installed software details.
Ans: I think that CIM_SoftwareIdentity class is used for this
purpose. Is it right?
Qn2 : I want to implement
CIM_SoftwareInstallationSerice.InstallFromURI method. Right now I
am trying to implement it synchronous.. Later I wish to change it
asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the
status as downloading/upgrading.
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the know the firmware installation status? means that
which class enumerating for this purpose?
Ans: I think CIM_ConcreteJob class is used for this purpose. right?
Please advise me.
Regards,
George
On Tue, Jul 30, 2013 at 2:58 PM, George varghese
<georgooty(a)gmail.com <mailto:georgooty@gmail.com>> wrote:
Hi,
Anybody please reply to me.
Regards,
George
On Mon, Jul 29, 2013 at 4:51 PM, George varghese
<georgooty(a)gmail.com <mailto:georgooty@gmail.com>> wrote:
Hi,
I have following questions regarding software update profile,
Qn 1. How to know the software revision and other details
Ans: I think that CIM_SoftwareIdentity class is used for
this purpose. Is it right?
Qn2 : I want to implement
CIM_SoftwareInstallationSerice.InstallFromURI method.
Right now I am trying to implement it synchronous.. Later
I wish to change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob
class. Fill the status as downloading
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the installation status? means that which
class enumerating for this purpose?
Please advise me.
Regards,
George
On Thu, Jul 25, 2013 at 3:51 PM, George varghese
<georgooty(a)gmail.com <mailto:georgooty@gmail.com>> wrote:
Hi,
What optional features you want to implement
(like Ordered Dependencies, Software Bundles
etc.).
No. I am trying to implement firmware via http . So I
trying to implement InstallFromURI method. In this
method I implement download packages using CURL
library to destination path. Right now I didn't fill
CIM_ConcreteJob instance.
What other functionality you are missing in
the profile (verification)?
Need to enumerate current installed firmware
revision.For this purpose need to enumerate
instance of CIM_SoftwareIdentity and
CIM_SoftwareInstallationService class. right?
Whether you are content with synchronous
methods? - easy to implement.
current implementation firmware installation done
by another process. So I think it should an
asynchronous. if it synchronous, take long time
for getting InstallFromURI method response.. right?..
And when you choose asynchronous, whether to
make indications to notify clients?
how to make notification to client. Please give
samples about indication.
How to represent your jobs in separate thread
or process?
Yes. firmware upgrade process already done, thats in
another process . So we need to query the status to
that process .Inter Process Communication(IPC) . using
messsage queue mechanism
Regards,
George
On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář
<miminar(a)redhat.com <mailto:miminar@redhat.com>> wrote:
On 25.7.2013 10:32, George varghese wrote:
>
> Hi,
>
> On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar(a)redhat.com> <mailto:miminar@redhat.com>
wrote:
>
> Hi George
>
>
> On 24.7.2013 20:35, George varghese wrote:
>>
>> Hi,
>>
>> I am trying to implement software update
provider for firmware updating. I have done
following things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
>> 2. Downloaded URI link
> >>Maybe I get you wrong. Isn't the provider
supposed to download the package from given URI
and install it? >>Why doing it yourself.
>
> 2. I described here the code sequence. download
the package from the given URI and install by
provider..
>
>
>> 3. Then set success as method,
KUint32_Set(&result, 0); KSetStatus(status, OK);
in spec I shall copied herre the body content of
response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
</n1:InstallFromURI_OUTPUT> </s:Body> I don't know
how to put description here, for this which method
I shall calling.
>> 4. I don't know about CIM_ConcretJob class
details. How to fill this class properties values.
>
> >>You don't need to use CIM_ConcreteJob at all,
if the synchronous invocation is sufficient. In
that case just ??>>return "Job Completed with No
Error", "Failed" or any other value < 4096.
>
> I think the installation process may be
asynchronous. That case which class enumerating
for knowing the download status.. .. If user shall
initiate the same process, what is the response
value... for this which class I need to enumerate?
Look here:
http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
Search for "PercentComplete" property. You may
also provide indications user can subscribe to.
This way he doesn't need to poll for status. With
asynchronous invocation there are just a few
possible values you can return: "Unspecified
Error" (2) or "Method Parameters Checked - Job
Started" (4096).
Return the first one if parameters are invalid or
the job could not be started, otherwise start the
job, make instance of CIM_ConcreteJob, return it
as an Out parameter and make 4096 the return value
of method.
>
> >>All the requirements are listed in Job Control
Profile (DSP1103) and Software Update
>
> >>profile. For implementation (in python) you
may check out our
openlmi->>providers/src/python/lmi/common/JobManager.py.
>
> No, provider implementation should be in C
language.
>
> What things we consider for implementing
software update provider?
What optional features you want to implement (like
Ordered Dependencies, Software Bundles etc.).
What other functionality you are missing in the
profile (verification)?
Whether you are content with synchronous methods?
- easy to implement.
And when you choose asynchronous, whether to make
indications to notify clients?
How to represent your jobs in separate thread or
process?
>
>> Regards,
>> George
>>
>>
>> _______________________________________________
>> openlmi-devel mailing list
>> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
11:09 p.m.
Hi George,
answers embedded bellow.
On 14.8.2013 08:14, George varghese wrote:
Hi,
I have following questions regarding software update profile, My
understanding, I have added here, please verify it.
Qn 1. I want to enumerate current installed software details.
Ans: I think that CIM_SoftwareIdentity class is used for this
purpose. Is it right?
Correct. In openlmi-software this enumeration is disabled
though. There
is just too many available packages to enumerate. Only enumeration of
LMI_SoftwareInstalledPackage (association class) is supported.
Qn2 : I want to implement
CIM_SoftwareInstallationSerice.InstallFromURI method. Right now I am
trying to implement it synchronous.. Later I wish to change it
asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class. Fill the status as
downloading/upgrading.
The Software Update Profile says it all. You don't need
to create any
CIM_ConcreteJob instances if you don't support asynchronous methods
right now.
2. Download and install the firmware in system
3. Return OK as status.
And "Job Completed with No Error" (0) as a
return value.
Qn3: How to the know the firmware installation status? means that
which class enumerating for this purpose?
Ans: I think CIM_ConcreteJob class is used for this purpose. right?
Yes but only in
cause you support asynchronous invocations. Software
Update Profile does not cover any progress readings when installing
synchronously.
Please advise me.
Regards,
George
On Tue, Jul 30, 2013 at 2:58 PM, George varghese <georgooty(a)gmail.com
<mailto:georgooty@gmail.com>> wrote:
Hi,
Anybody please reply to me.
Regards,
George
On Mon, Jul 29, 2013 at 4:51 PM, George varghese
<georgooty(a)gmail.com <mailto:georgooty@gmail.com>> wrote:
Hi,
I have following questions regarding software update profile,
Qn 1. How to know the software revision and other details
Ans: I think that CIM_SoftwareIdentity class is used for this
purpose. Is it right?
Qn2 : I want to implement
CIM_SoftwareInstallationSerice.InstallFromURI method. Right
now I am trying to implement it synchronous.. Later I wish to
change it asynchronous method.
Ans: I shall describe the steps here.
1. Create the instance of CIM_ConcreteJob class.
Fill the status as downloading
2. Download and install the firmware in system
3. Return OK as status.
Qn3: How to the installation status? means that which class
enumerating for this purpose?
Please advise me.
Regards,
George
On Thu, Jul 25, 2013 at 3:51 PM, George varghese
<georgooty(a)gmail.com <mailto:georgooty@gmail.com>> wrote:
Hi,
What optional features you want to implement (like
Ordered Dependencies, Software Bundles etc.).
No. I am trying to implement firmware via http . So I
trying to implement InstallFromURI method. In this method
I implement download packages using CURL library to
destination path. Right now I didn't fill CIM_ConcreteJob
instance.
What other functionality you are missing in the
profile (verification)?
Need to enumerate current installed firmware
revision.For this purpose need to enumerate instance
of CIM_SoftwareIdentity and
CIM_SoftwareInstallationService class. right?
Whether you are content with synchronous methods?
- easy to implement.
current implementation firmware installation done by
another process. So I think it should an
asynchronous. if it synchronous, take long time for
getting InstallFromURI method response.. right?..
And when you choose asynchronous, whether to make
indications to notify clients?
how to make notification to client. Please give
samples about indication.
How to represent your jobs in separate thread or
process?
Yes. firmware upgrade process already done, thats in
another process . So we need to query the status to that
process .Inter Process Communication(IPC) . using messsage
queue mechanism
Regards,
George
On Thu, Jul 25, 2013 at 2:55 PM, Michal Minář
<miminar(a)redhat.com <mailto:miminar@redhat.com>> wrote:
On 25.7.2013 10:32, George varghese wrote:
>
> Hi,
>
> On Thu, Jul 25, 2013 at 12:27 PM, Michal Minář
<miminar(a)redhat.com> <mailto:miminar@redhat.com> wrote:
>
> Hi George
>
>
> On 24.7.2013 20:35, George varghese wrote:
>>
>> Hi,
>>
>> I am trying to implement software update
provider for firmware updating. I have done following
things.. 1. Created a new instance of
CIM_SoftwareInstallationService.
>> 2. Downloaded URI link
> >>Maybe I get you wrong. Isn't the provider
supposed to download the package from given URI and
install it? >>Why doing it yourself.
>
> 2. I described here the code sequence. download the
package from the given URI and install by provider..
>
>
>> 3. Then set success as method,
KUint32_Set(&result, 0); KSetStatus(status, OK); in
spec I shall copied herre the body content of
response, <n1:InstallFromURI_OUTPUT>
<n1:ReturnValue>0</n1:ReturnValue>
</n1:InstallFromURI_OUTPUT> </s:Body> I don't know how
to put description here, for this which method I shall
calling.
>> 4. I don't know about CIM_ConcretJob class
details. How to fill this class properties values.
>
> >>You don't need to use CIM_ConcreteJob at all,
if the synchronous invocation is sufficient. In that
case just ??>>return "Job Completed with No Error",
"Failed" or any other value < 4096.
>
> I think the installation process may be
asynchronous. That case which class enumerating for
knowing the download status.. .. If user shall
initiate the same process, what is the response
value... for this which class I need to enumerate?
Look here:
http://schemas.dmtf.org/wbem/cim-html/2.34.0/CIM_ConcreteJob.html
Search for "PercentComplete" property. You may also
provide indications user can subscribe to.
This way he doesn't need to poll for status. With
asynchronous invocation there are just a few
possible values you can return: "Unspecified Error"
(2) or "Method Parameters Checked - Job Started" (4096).
Return the first one if parameters are invalid or the
job could not be started, otherwise start the job,
make instance of CIM_ConcreteJob, return it as an Out
parameter and make 4096 the return value of method.
>
> >>All the requirements are listed in Job Control
Profile (DSP1103) and Software Update
>
> >>profile. For implementation (in python) you may
check out our
openlmi->>providers/src/python/lmi/common/JobManager.py.
>
> No, provider implementation should be in C language.
>
> What things we consider for implementing software
update provider?
What optional features you want to implement (like
Ordered Dependencies, Software Bundles etc.).
What other functionality you are missing in the
profile (verification)?
Whether you are content with synchronous methods? -
easy to implement.
And when you choose asynchronous, whether to make
indications to notify clients?
How to represent your jobs in separate thread or process?
>
>> Regards,
>> George
>>
>>
>> _______________________________________________
>> openlmi-devel mailing list
>> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
>
>
>
>
> _______________________________________________
> openlmi-devel mailing list
> openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
<mailto:openlmi-devel@lists.fedorahosted.org>
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
_______________________________________________
openlmi-devel mailing list
openlmi-devel(a)lists.fedorahosted.org
https://lists.fedorahosted.org/mailman/listinfo/openlmi-devel
3900
days inactive
3930
days old
openlmi-devel@lists.fedorahosted.org
10 comments
2 participants
participants (2)
-
George varghese -
Michal Minář