FYI - this information is also available at: https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt Our Red Hat CVE's https://access.redhat.com/security/cve/CVE-2017-1000366 https://access.redhat.com/security/cve/CVE-2017-1000364 Regards, Cliff -------- Forwarded Message -------- Subject: [oss-security] Qualys Security Advisory - The Stack Clash Date: Mon, 19 Jun 2017 08:28:43 -0700 From: Qualys Security Advisory <qsa(a)qualys.com&gt; Reply-To: oss-security(a)lists.openwall.com To: oss-security(a)lists.openwall.com Qualys Security Advisory The Stack Clash ======================================================================== Contents ======================================================================== I. Introduction II. Problem II.1. Automatic stack expansion II.2. Stack guard-page II.3. Stack-clash exploitation III. Solutions IV. Results IV.1. Linux IV.2. OpenBSD IV.3. NetBSD IV.4. FreeBSD IV.5. Solaris V. Acknowledgments ======================================================================== I. Introduction ======================================================================== Our research started with a 96-megabyte surprise: b97bb000-b97dc000 rw-p 00000000 00:00 0 [heap] bf7c6000-bf806000 rw-p 00000000 00:00 0 [stack] and a 12-year-old question: "If the heap grows up, and the stack grows down, what happens when they clash? Is it exploitable? How?" - In 2005, Gael Delalleau presented "Large memory management vulnerabilities" and the first stack-clash exploit in user-space (against mod_php 4.3.0 on Apache 2.0.53): http://cansecwest.com/core05/memory_vulns_delalleau.pdf - In 2010, Rafal Wojtczuk published "Exploiting large memory management vulnerabilities in Xorg server running on Linux", the second stack-clash exploit in user-space (CVE-2010-2240): http://www.invisiblethingslab.com/resources/misc-2010/xorg-large-memory-a... - Since 2010, security researchers have exploited several stack-clashes in the kernel-space; for example: https://jon.oberheide.org/blog/2010/11/29/exploiting-stack-overflows-in-t... https://jon.oberheide.org/files/infiltrate12-thestackisback.pdf https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-li... In user-space, however, this problem has been greatly underestimated; the only public exploits are Gael Delalleau's and Rafal Wojtczuk's, and they were written before Linux introduced a protection against stack-clashes (a "guard-page" mapped below the stack): https://bugzilla.redhat.com/show_bug.cgi?id=CVE-2010-2240 In this advisory, we show that stack-clashes are widespread in user-space, and exploitable despite the stack guard-page; we discovered multiple vulnerabilities in guard-page implementations, and devised general methods for: - "Clashing" the stack with another memory region: we allocate memory until the stack reaches another memory region, or until another memory region reaches the stack; - "Jumping" over the stack guard-page: we move the stack-pointer from the stack and into the other memory region, without accessing the stack guard-page; - "Smashing" the stack, or the other memory region: we overwrite the stack with the other memory region, or the other memory region with the stack. To illustrate our findings, we developed the following exploits and proofs-of-concepts: - a local-root exploit against Exim (CVE-2017-1000369, CVE-2017-1000376) on i386 Debian; - a local-root exploit against Sudo (CVE-2017-1000367, CVE-2017-1000366) on i386 Debian, Ubuntu, CentOS; - an independent Sudoer-to-root exploit against CVE-2017-1000367 on any SELinux-enabled distribution; - a local-root exploit against ld.so and most SUID-root binaries (CVE-2017-1000366, CVE-2017-1000370) on i386 Debian, Fedora, CentOS; - a local-root exploit against ld.so and most SUID-root PIEs (CVE-2017-1000366, CVE-2017-1000371) on i386 Debian, Ubuntu, Fedora; - a local-root exploit against /bin/su (CVE-2017-1000366, CVE-2017-1000365) on i386 Debian; - a proof-of-concept that gains eip control against Sudo on i386 grsecurity/PaX (CVE-2017-1000367, CVE-2017-1000366, CVE-2017-1000377); - a local proof-of-concept that gains rip control against Exim (CVE-2017-1000369) on amd64 Debian; - a local-root exploit against ld.so and most SUID-root binaries (CVE-2017-1000366, CVE-2017-1000379) on amd64 Debian, Ubuntu, Fedora, CentOS; - a proof-of-concept against /usr/bin/at on i386 OpenBSD, for CVE-2017-1000372 in OpenBSD's stack guard-page implementation and CVE-2017-1000373 in OpenBSD's qsort() function; - a proof-of-concept for CVE-2017-1000374 and CVE-2017-1000375 in NetBSD's stack guard-page implementation; - a proof-of-concept for CVE-2017-1085 in FreeBSD's setrlimit() RLIMIT_STACK implementation; - two proofs-of-concept for CVE-2017-1083 and CVE-2017-1084 in FreeBSD's stack guard-page implementation; - a local-root exploit against /usr/bin/rsh (CVE-2017-3630, CVE-2017-3629, CVE-2017-3631) on Solaris 11. ======================================================================== II. Problem ======================================================================== Note: in this advisory, the "start of the stack" is the lowest address of its memory region, and the "end of the stack" is the highest address of its memory region; we do not use the ambiguous terms "top of the stack" and "bottom of the stack". ======================================================================== II.1. Automatic stack expansion ======================================================================== The user-space stack of a process is automatically expanded by the kernel: - if the stack-pointer (the esp register, on i386) reaches the start of the stack and the unmapped memory pages below (the stack grows down, on i386), - then a "page-fault" exception is raised and caught by the kernel, - and the page-fault handler transparently expands the user-space stack of the process (it decreases the start address of the stack), - or it terminates the process with a SIGSEGV if the stack expansion fails (for example, if the RLIMIT_STACK is reached). Unfortunately, this stack expansion mechanism is implicit and fragile: it relies on page-fault exceptions, but if another memory region is mapped directly below the stack, then the stack-pointer can move from the stack into the other memory region without raising a page-fault, and: - the kernel cannot tell that the process needed more stack memory; - the process cannot tell that its stack-pointer moved from the stack into another memory region. In contrast, the heap expansion mechanism is explicit and robust: the process uses the brk() system-call to tell the kernel that it needs more heap memory, and the kernel expands the heap accordingly (it increases the end address of the heap memory region -- the heap always grows up). ======================================================================== II.2. Stack guard-page ======================================================================== The fragile stack expansion mechanism poses a security threat: if the stack-pointer of a process can move from the stack into another memory region (which ends exactly where the stack starts) without raising a page-fault, then: - the process uses this other memory region as if it were an extension of the stack; - a write to this stack extension smashes the other memory region; - a write to the other memory region smashes the stack extension. To protect against this security threat, the kernel maps a "guard-page" below the start of the stack: one or more PROT_NONE pages (or unmappable pages) that: - raise a page-fault exception if accessed (before the stack-pointer can move from the stack into another memory region); - terminate the process with a SIGSEGV (because the page-fault handler cannot expand the stack if another memory region is mapped directly below). Unfortunately, a stack guard-page of a few kilobytes is insufficient (CVE-2017-1000364): if the stack-pointer "jumps" over the guard-page -- if it moves from the stack into another memory region without accessing the guard-page -- then no page-fault exception is raised and the stack extends into the other memory region. This theoretical vulnerability was first described in Gael Delalleau's 2005 presentation (slides 24-29). In the present advisory, we discuss its practicalities, and multiple vulnerabilities in stack guard-page implementations (in OpenBSD, NetBSD, and FreeBSD), but we exclude related vulnerabilities such as unbounded alloca()s and VLAs (Variable-Length Arrays) that have been exploited in the past: http://phrack.org/issues/63/14.html http://blog.exodusintel.com/2013/01/07/who-was-phone/ ======================================================================== II.3. Stack-clash exploitation ======================================================================== Must be a clash, there's no alternative. --The Clash, "Kingston Advice" Our exploits follow a series of four sequential steps -- each step allocates memory that must not be freed before all steps are complete: Step 1: Clash (the stack with another memory region) Step 2: Run (move the stack-pointer to the start of the stack) Step 3: Jump (over the stack guard-page, into the other memory region) Step 4: Smash (the stack, or the other memory region) ======================================================================== II.3.1. Step 1: Clash the stack with another memory region ======================================================================== Have the boys found the leak yet? --The Clash, "The Leader" Allocate memory until the start of the stack reaches the end of another memory region, or until the end of another memory region reaches the start of the stack. - The other memory region can be, for example: . the heap; . an anonymous mmap(); . the read-write segment of ld.so; . the read-write segment of a PIE, a Position-Independent Executable. - The memory allocated in this Step 1 can be, for example: . stack and heap memory; . stack and anonymous mmap() memory; . stack memory only. - The heap and anonymous mmap() memory can be: . temporarily allocated, but not freed before the stack guard-page is jumped over in Step 3 and memory is smashed in Step 4; . permanently leaked. On Linux, a general method for allocating anonymous mmap()s is the LD_AUDIT memory leak that we discovered in the ld.so part of the glibc, the GNU C Library (CVE-2017-1000366). - The stack memory can be allocated, for example: . through megabytes of command-line arguments and environment variables. On Linux, this general method for allocating stack memory is limited by the kernel to 1/4 of the current RLIMIT_STACK (1GB on i386 if RLIMIT_STACK is RLIM_INFINITY -- man execve, "Limits on size of arguments and environment"). However, as we were drafting this advisory, we realized that the kernel imposes this limit on the argument and environment strings, but not on the argv[] and envp[] pointers to these strings, and we developed alternative versions of our Linux exploits that do not depend on application-specific memory leaks (CVE-2017-1000365). . through recursive function calls. On BSD, we discovered a general method for allocating megabytes of stack memory: a vulnerability in qsort() that causes this function to recurse N/4 times, given a pathological input array of N elements (CVE-2017-1000373 in OpenBSD, CVE-2017-1000378 in NetBSD, and CVE-2017-1082 in FreeBSD). - In a few rare cases, Step 1 is not needed, because another memory region is naturally mapped directly below the stack (for example, ld.so in our Solaris exploit). ======================================================================== II.3.2. Step 2: Move the stack-pointer to the start of the stack ======================================================================== Run, run, run, run, run, don't you know? --The Clash, "Three Card Trick" Consume the unused stack memory that separates the stack-pointer from the start of the stack. This Step 2 is similar to Step 3 ("Jump over the stack guard-page") but is needed because: - the stack-pointer is usually several kilobytes higher than the start of the stack (functions that allocate a large stack-frame decrease the start address of the stack, but this address is never increased again); moreover: . the FreeBSD kernel automatically expands the user-space stack of a process by multiples of 128KB (SGROWSIZ, in vm_map_growstack()); . the Linux kernel initially expands the user-space stack of a process by 128KB (stack_expand, in setup_arg_pages()). - in Step 3, the stack-based buffer used to jump over the guard-page: . is usually not large enough to simultaneously move the stack-pointer to the start of the stack, and then into another memory region; . must not be fully written to (a full write would access the stack guard-page and terminate the process) but the stack memory consumed in this Step 2 can be fully written to (for example, strdupa() can be used in Step 2, but not in Step 3). The stack memory consumed in this Step 2 can be, for example: - large stack-frames, alloca()s, or VLAs (which can be detected by grsecurity/PaX's STACKLEAK plugin for GCC, https://grsecurity.net/features.php); - recursive function calls (which can be detected by GNU cflow, http://www.gnu.org/software/cflow/); - on Linux, we discovered that the argv[] and envp[] arrays of pointers can be used to consume the 128KB of initial stack expansion, because the kernel allocates these arrays on the stack long after the call to setup_arg_pages(); this general method for completing Step 2 is exploitable locally, but the initial stack expansion poses a major obstacle to the remote exploitation of stack-clashes, as mentioned in IV.1.1. In a few rare cases, Step 2 is not needed, because the stack-pointer is naturally close to the start of the stack (for example, in Exim's main() function, the 256KB group_list[] moves the stack-pointer to the start of the stack and beyond). ======================================================================== II.3.3. Step 3: Jump over the stack guard-page, into another memory region ======================================================================== You need a little jump of electrical shockers. --The Clash, "Clash City Rockers" Move the stack-pointer from the stack and into the memory region that clashed with the stack in Step 1, but without accessing the guard-page. To complete this Step 3, a large stack-based buffer, alloca(), or VLA is needed, and: - it must be larger than the guard-page; - it must end in the stack, above the guard-page; - it must start in the memory region below the stack guard-page; - it must not be fully written to (a full write would access the guard-page, raise a page-fault exception, and terminate the process, because the memory region mapped directly below the stack prevents the page-fault handler from expanding the stack). In a few cases, Step 3 is not needed: - on FreeBSD, a stack guard-page is implemented but disabled by default (CVE-2017-1083); - on OpenBSD, NetBSD, and FreeBSD, we discovered implementation vulnerabilities that eliminate the stack guard-page (CVE-2017-1000372, CVE-2017-1000374, CVE-2017-1084). On Linux, we devised general methods for jumping over the stack guard-page (CVE-2017-1000366): - The glibc's __dcigettext() function alloca()tes single_locale, a stack-based buffer of up to 128KB (MAX_ARG_STRLEN, man execve), the length of the LANGUAGE environment variable (if the current locale is neither "C" nor "POSIX", but distributions install default locales such as "C.UTF-8" and "en_US.utf8"). If LANGUAGE is mostly composed of ':' characters, then single_locale is barely written to, and can be used to jump over the stack guard-page. Moreover, if __dcigettext() finds the message to be translated, then _nl_find_msg() strdup()licates the OUTPUT_CHARSET environment variable and allows a local attacker to immediately smash the stack and gain control of the instruction pointer (the eip register, on i386), as detailed in Step 4a. We exploited this stack-clash against Sudo and su, but most of the SUID (set-user-ID) and SGID (set-group-ID) binaries that call setlocale(LC_ALL, "") and __dcigettext() or its derivatives (the *gettext() functions, the _() convenience macro, the strerror() function) are exploitable. - The glibc's vfprintf() function (called by the *printf() family of functions) alloca()tes a stack-based work buffer of up to 64KB (__MAX_ALLOCA_CUTOFF) if a width or precision is greater than 1KB (WORK_BUFFER_SIZE). If the corresponding format specifier is %s then this work buffer is never written to and can be used to jump over the stack guard-page. None of our exploits is based on this method, but it was one of our ideas to exploit Exim remotely, as mentioned in IV.1.1. - The glibc's getaddrinfo() function calls gaih_inet(), which alloca()tes tmpbuf, a stack-based buffer of up to 64KB (__MAX_ALLOCA_CUTOFF) that may be used to jump over the stack guard-page. Moreover, gaih_inet() calls the gethostbyname*() functions, which malloc()ate a heap-based DNS response of up to 64KB (MAXPACKET) that may allow a remote attacker to immediately smash the stack, as detailed in Step 4a. None of our exploits is based on this method, but it may be the key to the remote exploitation of stack-clashes. - The glibc's run-time dynamic linker ld.so alloca()tes llp_tmp, a stack-based copy of the LD_LIBRARY_PATH environment variable. If LD_LIBRARY_PATH contains Dynamic String Tokens (DSTs), they are first expanded: llp_tmp can be larger than 128KB (MAX_ARG_STRLEN) and not fully written to, and can therefore be used to jump over the stack guard-page and smash the memory region mapped directly below, as detailed in Step 4b. We exploited this ld.so stack-clash in two data-only attacks that bypass NX (No-eXecute) and ASLR (Address Space Layout Randomization) and obtain a privileged shell through most SUID and SGID binaries on most i386 Linux distributions. - Several local and remote applications allocate a 256KB stack-based "gid_t buffer[NGROUPS_MAX];" that is not fully written to and can be used to move the stack-pointer to the start of the stack (Step 2) and jump over the guard-page (Step 3). For example, Exim's main() function and older versions of util-linux's su. None of our exploits is based on this method, but an experimental version of our Exim exploit unexpectedly gained control of eip after the group_list[] buffer had jumped over the stack guard-page. ======================================================================== II.3.4. Step 4: Either smash the stack with another memory region (Step 4a) or smash another memory region with the stack (Step 4b) ======================================================================== Smash and grab, it's that kind of world. --The Clash, "One Emotion" In Step 3, a function allocates a large stack-based buffer and jumps over the stack guard-page into the memory region mapped directly below; in Step 4, before this function returns and jumps back into the stack: - Step 4a: a write to the memory region mapped below the stack (where esp still points to) effectively smashes the stack. We exploit this general method for completing Step 4 in Exim, Sudo, and su: . we overwrite a return-address on the stack and gain control of eip; . we return-into-libc (into system() or __libc_dlopen()) to defeat NX; . we brute-force ASLR (8 bits of entropy) if CVE-2016-3672 is patched; . we bypass SSP (Stack-Smashing Protector) because we overwrite the return-address of a function that is not protected by a stack canary (the memcpy() that smashes the stack usually overwrites its own stack-frame and return-address). - Step 4b: a write to the stack effectively smashes the memory region mapped below (where esp still points to). This second method for completing Step 4 is application-specific (it depends on the contents of the memory region that we smash) unless we exploit the run-time dynamic linker ld.so: . on Solaris, we devised a general method for smashing ld.so's read-write segment, overwriting one of its function pointers, and executing our own shell-code; . on Linux, we exploited most SUID and SGID binaries through ld.so: our "hwcap" exploit smashes an mmap()ed string, and our ".dynamic" exploit smashes a PIE's read-write segment before it is mprotect()ed read-only by Full RELRO (Full RELocate Read-Only -- GNU_RELRO and BIND_NOW). ======================================================================== III. Solutions ======================================================================== Based on our research, we recommend that the affected operating systems: - Increase the size of the stack guard-page to at least 1MB, and allow system administrators to easily modify this value (for example, grsecurity/PaX introduced /proc/sys/vm/heap_stack_gap in 2010). This first, short-term solution is cheap, but it can be defeated by a very large stack-based buffer. - Recompile all userland code (ld.so, libraries, binaries) with GCC's "-fstack-check" option, which prevents the stack-pointer from moving into another memory region without accessing the stack guard-page (it writes one word to every 4KB page allocated on the stack). This second, long-term solution is expensive, but it cannot be defeated (even if the stack guard-page is only 4KB, one page) -- unless a vulnerability is discovered in the implementation of the stack guard-page or the "-fstack-check" option. ======================================================================== IV. Results ======================================================================== ======================================================================== IV.1. Linux ======================================================================== ======================================================================== IV.1.1. Exim ======================================================================== Debian 8.5 Crude exploitation Our first exploit, a Local Privilege Escalation against Exim's SUID-root PIE (Position-Independent Executable) on i386 Debian 8.5, simply follows the four sequential steps outlined in II.3. Step 1: Clash the stack with the heap To reach the start of the stack with the end of the heap (man brk), we permanently leak memory through multiple -p command-line arguments that are malloc()ated by Exim but never free()d (CVE-2017-1000369) -- we call such a malloc()ated chunk of heap memory a "memleak-chunk". Because the -p argument strings are originally allocated on the stack by execve(), we must cover half of the initial heap-stack distance (between the start of the heap and the end of the stack) with stack memory, and half of this distance with heap memory. If we set the RLIMIT_STACK to 136MB (MIN_GAP, arch/x86/mm/mmap.c) then the initial heap-stack distance is minimal (randomized in a [96MB,137MB] range), but we cannot reach the stack with the heap because of the 1/4 limit imposed by the kernel on the argument and environment strings (man execve): 136MB/4=34MB of -p argument strings cannot cover 96MB/2=48MB, half of the minimum heap-stack distance. Moreover, if we increase the RLIMIT_STACK, the initial heap-stack distance also increases and we still cannot reach the stack with the heap. However, if we set the RLIMIT_STACK to RLIM_INFINITY (4GB on i386) then the kernel switches from the default top-down mmap() layout to a legacy bottom-up mmap() layout, and: - the initial heap-stack distance is approximately 2GB, because the start of the heap (the initial brk()) is randomized above the address 0x40000000, and the end of the stack is randomized below the address 0xC0000000; - we can reach the stack with the heap, despite the 1/4 limit imposed by the kernel on the argument and environment strings, because 4GB/4=1GB of -p argument strings can cover 2GB/2=1GB, half of the initial heap-stack distance; - we clash the stack with the heap around the address 0x80000000. Step 2: Move the stack-pointer (esp) to the start of the stack The 256KB stack-based group_list[] in Exim's main() naturally consumes the 128KB of initial stack expansion, as mentioned in II.3.2. Step 3: Jump over the stack guard-page and into the heap To move esp from the start of the stack into the heap, without accessing the stack guard-page, we use a malformed -d command-line argument that is written to the 32KB (STRING_SPRINTF_BUFFER_SIZE) stack-based buffer in Exim's string_sprintf() function. This buffer is not fully written to and hence does not access the stack guard-page, because our -d argument string is much shorter than 32KB. Step 4a: Smash the stack with the heap Before string_sprintf() returns (and moves esp from the heap back into the stack) it calls string_copy(), which malloc()ates and memcpy()es our -d argument string to the end of the heap, where esp still points to -- we call this malloc()ated chunk of heap memory the "smashing-chunk". This call to memcpy() therefore smashes its own stack-frame (which is not protected by SSP) with the contents of our smashing-chunk, and we overwrite memcpy()'s return-address with the address of libc's system() function (which is not randomized by ASLR because Debian 8.5 is vulnerable to CVE-2016-3672): - instead of smashing memcpy()'s stack-frame with an 8-byte pattern (the return-address to system() and its argument) we smash it with a simple 4-byte pattern (the return-address to system()), append "." to the PATH environment variable, and symlink() our exploit to the string that begins at the address of libc's system() function; - system() does not drop our escalated root privileges, because Debian's /bin/sh is dash, not bash and its -p option (man bash). This first version of our Exim exploit obtained a root-shell after nearly a week of failed attempts; to improve this result, we analyzed every step of a successful run. Refined exploitation Step 1: Clash the stack with the heap + The heap must be able to reach the stack [Condition 1] The start of the heap is randomized in the 32MB range above the end of Exim's PIE (the end of its .bss section), but the growth of the heap is sometimes blocked by libraries that are mmap()ed within the same range (because of the legacy bottom-up mmap() layout). On Debian 8.5, Exim's libraries occupy about 8MB and thus block the growth of the heap with a probability of 8MB/32MB = 1/4. When the heap is blocked by the libraries, malloc() switches from brk() to mmap()s of 1MB (MMAP_AS_MORECORE_SIZE), and our memory leak reaches the stack with mmap()s instead of the heap. Such a stack-clash is also exploitable, but its probability of success is low, as detailed in IV.1.6., and we therefore discarded this approach. + The heap must always reach the stack, when not blocked by libraries Because the initial heap-stack distance (between the start of the heap and the end of the stack) is a random variable: - either we allocate the exact amount of heap memory to cover the mean heap-stack distance, but the probability of success of this approach is low and we therefore discarded it; - or we allocate enough heap memory to always reach the stack, even when the initial heap-stack distance is maximal; after the heap reaches the stack, our memory leak allocates mmap()s of 1MB above the stack (below 0xC0000000) and below the heap (above the libraries), but it must not exhaust the address-space (the 1GB below 0x40000000 is unmappable); - the final heap-stack distance (between the end of the heap and the start of the stack) is also a random variable: . its minimum value is 8KB (the stack guard-page, plus a safety page imposed by the brk() system-call in mm/mmap.c); . its maximum value is roughly the size of a memleak-chunk, plus 128KB (DEFAULT_TOP_PAD, malloc/malloc.c). Step 3: Jump over the stack guard-page and into the heap - The stack-pointer must jump over the guard-page and land into the free chunk at the end of the heap (the remainder of the heap after malloc() switches from brk() to mmap()), where both the smashing-chunk and memcpy()'s stack-frame are allocated and overwritten in Step 4a [Condition 2]; - The write (of approximately smashing-chunk bytes) to string_sprintf()'s stack-based buffer (which starts where the guard-page jump lands) must not crash into the end of the heap [Condition 3]. Step 4a: Smash the stack with the heap The smashing-chunk must be allocated into the free chunk at the end of the heap: - the smashing-chunk must not be allocated into the free chunks left over at the end of the 1MB mmap()s [Condition 4]; - the memleak-chunks must not be allocated into the free chunk at the end of the heap [Condition 5]. Intuitively, the probability of gaining control of eip depends on the size of the smashing-chunk (the guard-page jump's landing-zone) and the size of the memleak-chunks (which determines the final heap-stack distance). To maximize this probability, we wrote a helper program that imposes the following conditions on the smashing-chunk and memleak-chunks: - the smashing-chunk must be smaller than 32KB (STRING_SPRINTF_BUFFER_SIZE) [Condition 3]; - the memleak-chunks must be smaller than 128KB (DEFAULT_MMAP_THRESHOLD, malloc/malloc.c); - the free chunk at the end of the heap must be larger than twice the smashing-chunk size [Conditions 2 and 3]; - the free chunk at the end of the heap must be smaller than the memleak-chunk size [Condition 5]; - when the final heap-stack distance is minimal, the 32KB (STRING_SPRINTF_BUFFER_SIZE) guard-page jump must land below the free chunk at the end of the heap [Condition 2]; - the free chunks at the end of the 1MB mmap()s must be: . either smaller than the smashing-chunk [Condition 4]; . or larger than the free chunk at the end of the heap (glibc's malloc() is a best-fit allocator) [Condition 4]. The resulting smashing-chunk and memleak-chunk sizes are: smash: 10224 memleak: 27656 brk_min: 20464 brk_max: 24552 mmap_top: 25304 probability: 1/16 (0.06190487817 <sip:116006190487817>) In theory, the probability of gaining control of eip is 1/21: the product of the 1/16 probability calculated by this helper program (approximately (smashing-chunk / (memleak-chunk + DEFAULT_TOP_PAD))) and the 3/4 probability of reaching the stack with the heap [Condition 1]. In practice, on Debian 8.5, our final Exim exploit: - gains eip control in 1 run out of 28, on average; - takes 2.5 seconds per run (on a 4GB Virtual Machine); - has a good chance of obtaining a root-shell after 28*2.5 = 70 seconds; - uses 4GB of memory (2GB in the Exim process, and 2GB in the process fork()ed by system()). Debian 8.6 Unlike Debian 8.5, Debian 8.6 is not vulnerable to CVE-2016-3672: after gaining eip control in Step 4a (Smash), the probability of successfully returning-into-libc's system() function is 1/256 (8 bits of entropy -- libraries are randomized in a 1MB range but aligned on 4KB). Consequently, our final Exim exploit has a good chance of obtaining a root-shell on Debian 8.6 after 256*28*2.5 seconds = 5 hours (256*28=7168 runs). As we were drafting this advisory, we tried an alternative approach against Exim on Debian 8.6: we discovered that its stack is executable, because it depends on libgnutls-deb0, which depends on libp11-kit, which depends on libffi, which incorrectly requires an executable GNU_STACK (CVE-2017-1000376). Initially, we discarded this approach because our 1GB of -p argument strings on the stack is not executable (_dl_make_stack_executable() only mprotect()s the stack below argv[] and envp[]): 41e00000-723d7000 rw-p 00000000 00:00 0 [heap] 802f1000-80334000 rwxp 00000000 00:00 0 [stack] 80334000-bfce6000 rw-p 00000000 00:00 0 and because the stack is randomized in an 8MB range but we do not control the contents of any large buffer on the executable stack. Later, we discovered that two 128KB (MAX_ARG_STRLEN) copies of the LD_PRELOAD environment variable can be allocated onto the executable stack by ld.so's dl_main() and open_path() functions, automatically freed upon return from these functions, and re-allocated (but not overwritten) by Exim's 256KB stack-based group_list[]. In theory, the probability of returning into our shell-code (into these executable copies of LD_PRELOAD) is 1/32 (2*128KB/8MB), higher than the 1/256 probability of returning-into-libc. In practice, this alternative Exim exploit has a good chance of obtaining a root-shell after 1174 runs -- instead of 32*28=896 runs in theory, because the two 128KB copies of LD_PRELOAD are never perfectly aligned with Exim's 256KB group_list[] -- or 1174*2.5 seconds = 50 minutes. Debian 9 and 10 Unlike Debian 8, Debian 9 and 10 are not vulnerable to offset2lib, a minor weakness in Linux's ASLR that coincidentally affects Step 1 (Clash) of our stack-clash exploits: https://cybersecurity.upv.es/attacks/offset2lib/offset2lib.html https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit... If we set RLIMIT_STACK to RLIM_INFINITY, the kernel still switches to the legacy bottom-up mmap() layout, and the libraries are randomized in the 1MB range above the address 0x40000000, but Exim's PIE is randomized in the 1MB range above the address 0x80000000 and the heap is randomized in the 32MB range above the PIE's .bss section. As a result: - the heap is always able to reach the stack, because its growth is never blocked by the libraries -- the theoretical probability of gaining eip control is 1/16, the probability calculated by our helper program; - the heap clashes with the stack around the address 0xA0000000, because the initial heap-stack distance is 1GB (0xC0000000-0x80000000) and can be covered with 512MB of heap memory and 512MB of stack memory. Remote exploitation Exim's string_sprintf() or glibc's vfprintf() can be used to remotely complete Steps 3 and 4 of the stack-clash; and the 256KB group_list[] in Exim's main() naturally consumes the 128KB of initial stack expansion in Step 2; but another 256KB group_list[] in Exim's exim_setugid() further decreases the start address of the stack and prevents us from remotely completing Step 2 and exploiting Exim. ======================================================================== IV.1.2. Sudo ======================================================================== Introduction We discovered a vulnerability in Sudo's get_process_ttyname() for Linux: this function opens "/proc/[pid]/stat" (man proc) and reads the device number of the tty from field 7 (tty_nr). Unfortunately, these fields are space-separated and field 2 (comm, the filename of the command) can contain spaces (CVE-2017-1000367). For example, if we execute Sudo through the symlink "./ 1 ", get_process_ttyname() calls sudo_ttyname_dev() to search for the non-existent tty device number "1" in the built-in search_devs[]. Next, sudo_ttyname_dev() calls the recursive function sudo_ttyname_scan() to search for this non-existent tty device number "1" in a breadth-first traversal of "/dev". Last, we exploit this recursive function during its traversal of the world-writable "/dev/shm", and allocate hundreds of megabytes of heap memory from the filesystem (directory pathnames) instead of the stack (the command-line arguments and environment variables allocated by our other stack-clash exploits). Step 1: Clash the stack with the heap sudo_ttyname_scan() strdup()licates the pathnames of the directories and sub-directories that it traverses, but does not free() them until it returns. Each one of these "memleak-chunks" allocates at most 4KB (PATH_MAX) of heap memory. Step 2: Move the stack-pointer to the start of the stack The recursive calls to sudo_ttyname_scan() allocate 4KB (PATH_MAX) stack-frames that naturally consume the 128KB of initial stack expansion. Step 3: Jump over the stack guard-page and into the heap If the length of a directory pathname reaches 4KB (PATH_MAX), sudo_ttyname_scan() calls warning(), which calls strerror() and _(), which call gettext() and allow us to jump over the stack guard-page with an alloca() of up to 128KB (the LANGUAGE environment variable), as explained in II.3.3. Step 4a: Smash the stack with the heap The self-contained gettext() exploitation method malloc()ates and memcpy()es a "smashing-chunk" of up to 128KB (the OUTPUT_CHARSET environment variable) that smashes memcpy()'s stack-frame and return-address, as explained in II.3.4. Debian 8.5 Step 1: Clash the stack with the heap Debian 8.5 is vulnerable to CVE-2016-3672: if we set RLIMIT_STACK to RLIM_INFINITY, the kernel switches to the legacy bottom-up mmap() layout and disables the ASLR of Sudo's PIE and libraries, but still the initial heap-stack distance is randomized and roughly 2GB (0xC0000000-0x40000000 -- the start of the heap is randomized in a 32MB range above 0x40000000, and the end of the stack is randomized in the 8MB range below 0xC0000000). To reach the start of the stack with the end of the heap, we allocate hundreds of megabytes of heap memory from the filesystem (directory pathnames), and: - the heap must be able to reach the stack -- on Debian 8.5, Sudo's libraries occupy about 3MB and hence block the growth of the heap with a probability of 3MB/32MB ~= 1/11; - when not blocked by the libraries, the heap must always reach the stack, even when the initial heap-stack distance is maximal (as detailed in IV.1.1.); - we cover half of the initial heap-stack distance with 1GB of heap memory (the memleak-chunks, strdup()licated directory pathnames); - we cover the other half of this distance with 1GB of stack memory (the maximum permitted by the kernel's 1/4 limit on the argument and environment strings) and thus reduce our on-disk inode usage; - we redirect sudo_ttyname_scan()'s traversal of /dev to /var/tmp (through a symlink planted in /dev/shm) to work around the small number of inodes available in /dev/shm. After the heap reaches the stack and malloc() switches from brk() to mmap()s of 1MB: - the size of the free chunk left over at the end of the heap is a random variable in the [0B,4KB] range -- 4KB (PATH_MAX) is the approximate size of a memleak-chunk; - the final heap-stack distance (between the end of the heap and the start of the stack) is a random variable in the [8KB,4KB+128KB=132KB] range -- the size of a memleak-chunk plus 128KB (DEFAULT_TOP_PAD); - sudo_ttyname_scan() recurses a few more times and therefore allocates more stack memory, but this stack expansion is blocked by the heap and crashes into the stack guard-page after 16 recursions on average (132KB/4KB/2, where 132KB is the maximum final heap-stack distance, and 4KB is the size of sudo_ttyname_scan()'s stack-frame). To solve this unexpected problem, we: - first, redirect sudo_ttyname_scan() to a directory tree "A" in /var/tmp that recurses and allocates stack memory, but does not allocate heap memory (each directory level contains only one entry, the sub-directory that is connected to the next directory level); - second, redirect sudo_ttyname_scan() to a directory tree "B" in /var/tmp that recurses and allocates heap memory (each directory level contains many entries), but does not allocate more stack memory (it simply consumes the stack memory that was already allocated by the directory tree "A"): it does not further expand the stack, and does not crash into the guard-page. Finally, we increase the speed of our exploit and avoid thousands of useless recursions: - in each directory level traversed by sudo_ttyname_scan(), we randomly modify the names of its sub-directories until the first call to readdir() returns the only sub-directory that is connected to the next level of the directory tree (all other sub-directories allocate heap memory but are otherwise empty); - we dup2() Sudo's stdout and stderr to a pipe with no readers that terminates Sudo with a SIGPIPE if sudo_ttyname_scan() calls warning() and sudo_printf() (a failed exploit attempt, usually because the final heap-stack distance is much longer or shorter than the guard-page jump). Step 2: Move the stack-pointer to the start of the stack sudo_ttyname_scan() allocates a 4KB (PATH_MAX) stack-based pathbuf[] that naturally consumes the 128KB of initial stack expansion in fewer than 128KB/4KB=32 recursive calls. The recursive calls to sudo_ttyname_scan() allocate less than 8MB of stack memory: the maximum number of recursions (PATH_MAX / strlen("/a") = 2K) multiplied by the size of sudo_ttyname_scan()'s stack-frame (4KB). Step 3: Jump over the stack guard-page and into the heap The length of the guard-page jump in gettext() is the length of the LANGUAGE environment variable (at most 128KB, MAX_ARG_STRLEN): we take a 64KB jump, well within the range of the final heap-stack distance; this jump then lands into the free chunk at the end of the heap, where the smashing-chunk will be allocated in Step 4a, with a probability of (smashing-chunk / (memleak-chunk + DEFAULT_TOP_PAD)). If available, we assign "C.UTF-8" to the LC_ALL environment variable, and prepend "be" to our 64KB LANGUAGE environment variable, because these minimal locales do not interfere with our heap feng-shui. Step 4a: Smash the stack with the heap In gettext(), the smashing-chunk (a malloc() and memcpy() of the OUTPUT_CHARSET environment variable) must be allocated into the free chunk at the end of the heap, where the stack-frame of memcpy() is also allocated. First, if the size of our memleak-chunks is exactly 4KB+8B (PATH_MAX+MALLOC_ALIGNMENT), then: - the size of the free chunk at the end of the heap is a random variable in the [0B,4KB] range; - the size of the free chunks left over at the end of the 1MB mmap()s is roughly 1MB%(4KB+8B)=2KB. Second, if the size of our smashing-chunk is about 2KB+256B (PATH_MAX/2+NAME_MAX), then: - it is always larger than (and never allocated into) the free chunks at the end of the 1MB mmap()s; - it is smaller than (and allocated into) the free chunk at the end of the heap with a probability of roughly 1-(2KB+256B)/4KB. Last, in each level of our directory tree "B", sudo_ttyname_scan() malloc()ates and realloc()ates an array of pointers to sub-directories, but these realloc()s prevent the smashing-chunk from being allocated into the free chunk at the end of the heap: - they create holes in the heap, where the smashing-chunk may be allocated to; - they may allocate the free chunk at the end of the heap, where the smashing-chunk should be allocated to. To solve these problems, we carefully calculate the number of sub-directories in each level of our directory tree "B": - we limit the size of the realloc()s -- and hence the size of the holes that they create -- to 4KB+2KB: . either a memleak-chunk is allocated into such a hole, and the remainder is smaller than the smashing-chunk ("not a fit"); . or such a hole is not allocated, but it is larger than the largest free chunk at the end of the heap ("a worse fit"); - we gradually reduce the final size of the realloc()s in the last levels of our directory tree "B", and hence re-allocate the holes created in the previous levels. In theory, on Debian 8.5, the probability of gaining control of eip is approximately 1/148, the product of: - (Step 1) the probability of reaching the stack with the heap: 1-3MB/32MB; - (Step 3) the probability of jumping over the stack guard-page and into the free chunk at the end of the heap: (2KB+256B) / (4KB+8B + 128KB); - (Step 4a) the probability of allocating the smashing-chunk into the free chunk at the end of the heap: 1-(2KB+256B)/4KB. In practice, on Debian 8.5, this Sudo exploit: - gains eip control in 1 run out of 200, on average; - takes 2.8 seconds per run (on a 4GB Virtual Machine); - has a good chance of obtaining a root-shell after 200 * 2.8 seconds = 9 minutes; - uses 2GB of memory. Note: we do not return-into-libc's system() in Step 4a because /bin/sh may be bash, which drops our escalated root privileges upon execution. Instead, we: - either return-into-libc's __gconv_find_shlib() function through find_module(), which loads this function's argument from -0x20(%ebp); - or return-into-libc's __libc_dlopen_mode() function through nss_load_library(), which loads this function's argument from -0x1c(%ebp); - search the libc for a relative pathname that contains a slash character (for example, "./fork.c") and pass its address to __gconv_find_shlib() or __libc_dlopen_mode(); - symlink() our PIE exploit to this pathname, and let Sudo execute our _init() constructor as root, upon successful exploitation. Debian 8.6 Unlike Debian 8.5, Debian 8.6 is not vulnerable to CVE-2016-3672: Sudo's PIE and libraries are always randomized, even if we set RLIMIT_STACK to RLIM_INFINITY; the probability of successfully returning-into-libc, after gaining eip control in Step 4a (Smash), is 1/256. However, Debian 8.6 is still vulnerable to offset2lib, the minor weakness in Linux's ASLR that coincidentally affects Step 1 (Clash) of our stack-clash exploits: - if we set RLIMIT_STACK to 136MB (MIN_GAP) or less (the default is 8MB), then the initial heap-stack distance (between the start of the heap and the end of the stack) is minimal, a random variable in the [96MB,137MB] range; - instead of allocating 1GB of heap memory and 1GB of stack memory to clash the stack with the heap, we merely allocate 137MB of heap memory (directory pathnames from our directory tree "B") and no stack memory. In theory, on Debian 8.6, the probability of gaining eip control is 1/134 (instead of 1/148 on Debian 8.5) because the growth of the heap is never blocked by Sudo's libraries; and in practice, this Sudo exploit takes only 0.15 second per run (instead of 2.8 on Debian 8.5). Independent exploitation The vulnerability that we discovered in Sudo's get_process_ttyname() function for Linux (CVE-2017-1000367) is exploitable independently of its stack-clash repercussions: through this vulnerability, a local user can pretend that his tty is any character device on the filesystem, and after two race conditions, he can pretend that his tty is any file on the filesystem. On an SELinux-enabled system, if a user is Sudoer for a command that does not grant him full root privileges, he can overwrite any file on the filesystem (including root-owned files) with this command's output, because relabel_tty() (in src/selinux.c) calls open(O_RDWR|O_NONBLOCK) on his tty and dup2()s it to the command's stdin, stdout, and stderr. To exploit this vulnerability, we: - create a directory "/dev/shm/_tmp" (to work around /proc/sys/fs/protected_symlinks), and a symlink "/dev/shm/_tmp/_tty" to a non-existent pty "/dev/pts/57", whose device number is 34873; - run Sudo through a symlink "/dev/shm/_tmp/ 34873 " that spoofs the device number of this non-existent pty; - set the flag CD_RBAC_ENABLED through the command-line option "-r role" (where "role" can be our current role, for example "unconfined_r"); - monitor our directory "/dev/shm/_tmp" (for an IN_OPEN inotify event) and wait until Sudo opendir()s it (because sudo_ttyname_dev() cannot find our non-existent pty in "/dev/pts/"); - SIGSTOP Sudo, call openpty() until it creates our non-existent pty, and SIGCONT Sudo; - monitor our directory "/dev/shm/_tmp" (for an IN_CLOSE_NOWRITE inotify event) and wait until Sudo closedir()s it; - SIGSTOP Sudo, replace the symlink "/dev/shm/_tmp/_tty" to our now-existent pty with a symlink to the file that we want to overwrite (for example "/etc/passwd"), and SIGCONT Sudo; - control the output of the command executed by Sudo (the output that overwrites "/etc/passwd"): . either through a command-specific method; . or through a general method such as "--\nHELLO\nWORLD\n" (by default, getopt() prints an error message to stderr if it does not recognize an option character). To reliably win the two SIGSTOP races, we preempt the Sudo process: we setpriority() it to the lowest priority, sched_setscheduler() it to SCHED_IDLE, and sched_setaffinity() it to the same CPU as our exploit. [john@localhost ~]$ head -n 8 /etc/passwd root:x:0:0:root:/root:/bin/bash bin:x:1:1:bin:/bin:/sbin/nologin daemon:x:2:2:daemon:/sbin:/sbin/nologin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin sync:x:5:0:sync:/sbin:/bin/sync shutdown:x:6:0:shutdown:/sbin:/sbin/shutdown halt:x:7:0:halt:/sbin:/sbin/halt [john@localhost ~]$ sudo -l [sudo] password for john: ... User john may run the following commands on localhost: (ALL) /usr/bin/sum [john@localhost ~]$ ./Linux_sudo_CVE-2017-1000367 /usr/bin/sum $'--\nHELLO\nWORLD\n' [sudo] password for john: [john@localhost ~]$ head -n 8 /etc/passwd /usr/bin/sum: unrecognized option '-- HELLO WORLD ' Try '/usr/bin/sum --help' for more information. ogin adm:x:3:4:adm:/var/adm:/sbin/nologin lp:x:4:7:lp:/var/spool/lpd:/sbin/nologin ======================================================================== IV.1.3. ld.so "hwcap" exploit ======================================================================== "ld.so and ld-linux.so* find and load the shared libraries needed by a program, prepare the program to run, and then run it." (man ld.so) Through ld.so, most SUID and SGID binaries on most i386 Linux distributions are exploitable. For example: Debian 7, 8, 9, 10; Fedora 23, 24, 25; CentOS 5, 6, 7. Debian 8.5 Step 1: Clash the stack with anonymous mmap()s The minimal malloc() implementation in ld.so calls mmap(), not brk(), to obtain memory from the system, and it never calls munmap(). To reach the start of the stack with anonymous mmap()s, we: - set RLIMIT_STACK to RLIM_INFINITY and switch from the default top-down mmap() layout to the legacy bottom-up mmap() layout; - cover half of the initial mmap-stack distance (0xC0000000-0x40000000=2GB) with 1GB of stack memory (the maximum permitted by the kernel's 1/4 limit on the argument and environment strings); - cover the other half of this distance with 1GB of anonymous mmap()s, through multiple LD_AUDIT environment variables that permanently leak millions of audit_list structures (CVE-2017-1000366) in process_envvars() and process_dl_audit() (elf/rtld.c). Step 2: Move the stack-pointer to the start of the stack To consume the 128KB of initial stack expansion, we simply pass 128KB of argv[] and envp[] pointers to execve(), as explained in II.3.2. Step 3: Jump over the stack guard-page and into the anonymous mmap()s _dl_init_paths() (elf/dl-load.c), which is called by dl_main() after process_envvars(), alloca()tes llp_tmp, a stack-based buffer large enough to hold the LD_LIBRARY_PATH environment variable and any combination of Dynamic String Token (DST) replacement strings. To calculate the size of llp_tmp, _dl_init_paths() must: - first, scan LD_LIBRARY_PATH and count all DSTs ($LIB, $PLATFORM, and $ORIGIN); - second, multiply the number of DSTs by the length of the longest DST replacement string (on Debian, $LIB is replaced by the 18-char-long "lib/i386-linux-gnu", $PLATFORM by "i386" or "i686", and $ORIGIN by the pathname of the program's directory, for example "/bin" or "/usr/sbin" -- the longest DST replacement string is usually "lib/i386-linux-gnu"); - last, add the length of the original LD_LIBRARY_PATH. Consequently, if LD_LIBRARY_PATH contains many DSTs that are replaced by the shortest DST replacement string, then llp_tmp is large but not fully written to, and can be used to jump over the stack guard-page and into the anonymous mmap()s. Our ld.so exploits do not use $ORIGIN because it is ignored by several distributions and glibc versions; for example: 2010-12-09 Andreas Schwab <schwab(a)redhat.com&gt; * elf/dl-object.c (_dl_new_object): Ignore origin of privileged program. Index: glibc-2.12-2-gc4ccff1/elf/dl-object.c =================================================================== --- glibc-2.12-2-gc4ccff1.orig/elf/dl-object.c +++ glibc-2.12-2-gc4ccff1/elf/dl-object.c @@ -214,6 +214,9 @@ _dl_new_object (char *realname, const ch out: new->l_origin = origin; } + else if (INTUSE(__libc_enable_secure) && type == lt_executable) + /* The origin of a privileged program cannot be trusted. */ + new->l_origin = (char *) -1; return new; } Step 4b: Smash an anonymous mmap() with the stack Before _dl_init_paths() returns to dl_main() and jumps back from the anonymous mmap()s into the stack, we overwrite the block of mmap()ed memory malloc()ated by _dl_important_hwcaps() with the contents of the stack-based buffer llp_tmp. - The block of memory malloc()ated by _dl_important_hwcaps() is divided in two: . The first part (the "hwcap-pointers") is an array of r_strlenpair structures that point to the hardware-capability strings stored in the second part of this memory block. . The second part (the "hwcap-strings") contains strings of hardware-capabilities that are appended to the pathnames of trusted directories, such as "/lib/" and "/lib/i386-linux-gnu/", when open_path() searches for audit libraries (LD_AUDIT), preload libraries (LD_PRELOAD), or dependent libraries (DT_NEEDED). For example, on Debian, when open_path() finds "libc.so.6" in "/lib/i386-linux-gnu/i686/cmov/", "i686/cmov/" is such a hardware-capability string. - To overwrite the block of memory malloc()ated by _dl_important_hwcaps() with the contents of the stack-based buffer llp_tmp, we divide our LD_LIBRARY_PATH environment variable in two: . The first, static part (our "good-write") overwrites the first hardware-capability string with characters that we do control. . The second, dynamic part (our "bad-write") overwrites the last hardware-capability strings with characters that we do not control (the short DST replacement strings that enlarge llp_tmp and allow us to jump over the stack guard-page). If our 16-byte-aligned good-write overwrites the 8-byte-aligned first hardware-capability string with the 8-byte pattern "/../tmp/", and if we append the trusted directory "/lib" to our LD_LIBRARY_PATH, then (after _dl_init_paths() returns to dl_main()): - dlmopen_doit() tries to load an LD_AUDIT library "a" (our memory leak from Step 1); - _dl_map_object() searches for "a" in the trusted directory "/lib" from our LD_LIBRARY_PATH; - open_path() finds our library "a" in "/lib//../tmp//../tmp//../tmp/" because we overwrote the first hardware-capability string with the pattern "/../tmp/"; - dl_open_worker() executes our library's _init() constructor, as root. In theory, this exploit's probability of success depends on: - (event A) the size of rtld_search_dirs.dirs[0], an array of r_search_path_elem structures that are malloc()ated by _dl_init_paths() after the _dl_important_hwcaps(), and must be allocated above the stack (below 0xC0000000), not below the stack where it would interfere with Steps 3 (Jump) and 4b (Smash): P(A) = 1 - size of rtld_search_dirs.dirs[0] / max stack randomization - (event B) the size of the hwcap-pointers and the size of our good-write, which must overwrite the first hardware-capability string, but not the first hardware-capability pointer (to this string): P(B|A) = MIN(size of hwcap-pointers, size of good-write) / (max stack randomization - size of rtld_search_dirs.dirs[0]) - (event C) the size of the hwcap-strings and the size of our bad-write, which must not write past the end of hwcap-strings; but we guarantee that size of hwcap-strings >= size of good-write + size of bad-write: P(C|B) = 1 In practice, we use the LD_HWCAP_MASK environment variable to maximize this exploit's probability of success, because: - the size of the hwcap-pointers -- which act as a cushion that absorbs the excess of good-write without crashing, - the size of the hwcap-strings -- which act as a cushion that absorbs the excess of good-write and bad-write without crashing, - and the size of rtld_search_dirs.dirs[0], are all proportional to 2^N, where N is the number of supported hardware-capabilities that we enable in LD_HWCAP_MASK. For example, on Debian 8.5, this exploit: - has a 1/151 probability of success; - takes 5.5 seconds per run (on a 4GB Virtual Machine); - has a good chance of obtaining a root-shell after 151 * 5.5 seconds = 14 minutes. Debian 8.6 Unlike Debian 8.5, Debian 8.6 is not vulnerable to CVE-2016-3672, but our ld.so "hwcap" exploit is a data-only attack and is not affected by the ASLR of the libraries and PIEs. Debian 9 and 10 Unlike Debian 8, Debian 9 and 10 are not vulnerable to offset2lib: if we set RLIMIT_STACK to RLIM_INFINITY, the libraries are randomized above the address 0x40000000, but the PIE is randomized above 0x80000000 (instead of 0x40000000 before the offset2lib patch). Unfortunately, we discovered a vulnerability in the offset2lib patch (CVE-2017-1000370): if the PIE is execve()d with 1GB of argument or environment strings (the maximum permitted by the kernel's 1/4 limit) then the stack occupies the address 0x80000000, and the PIE is mapped above the address 0x40000000 instead, directly below the libraries. This vulnerability effectively nullifies the offset2lib patch, and allows us to reuse our Debian 8 exploit against Debian 9 and 10. $ ./Linux_offset2lib Run #1... CVE-2017-1000370 triggered 40076000-40078000 r-xp 00000000 00:26 25041 /tmp/Linux_offset2lib 40078000-40079000 r--p 00001000 00:26 25041 /tmp/Linux_offset2lib 40079000-4009b000 rw-p 00002000 00:26 25041 /tmp/Linux_offset2lib 4009b000-400c0000 r-xp 00000000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400c0000-400c1000 r--p 00024000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400c1000-400c2000 rw-p 00025000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400c2000-400c4000 r--p 00000000 00:00 0 [vvar] 400c4000-400c6000 r-xp 00000000 00:00 0 [vdso] 400c6000-400c8000 rw-p 00000000 00:00 0 400cf000-402a3000 r-xp 00000000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 402a3000-402a4000 ---p 001d4000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 402a4000-402a6000 r--p 001d4000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 402a6000-402a7000 rw-p 001d6000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 402a7000-402aa000 rw-p 00000000 00:00 0 7fcf1000-bfcf2000 rw-p 00000000 00:00 0 [stack] Caveats - On Fedora and CentOS, this ld.so "hwcap" exploit fails against /usr/bin/passwd and /usr/bin/chage (but it works against all other SUID-root binaries) because of SELinux: type=AVC msg=audit(1492091008.983:414): avc: denied { execute } for pid=2169 comm="passwd" path="/var/tmp/a" dev="dm-0" ino=12828063 scontext=unconfined_u:unconfined_r:passwd_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_tmp_t:s0 tclass=file permissive=0 type=AVC msg=audit(1492092997.581:487): avc: denied { execute } for pid=2648 comm="chage" path="/var/tmp/a" dev="dm-0" ino=12828063 scontext=unconfined_u:unconfined_r:passwd_t:s0-s0:c0.c1023 tcontext=unconfined_u:object_r:user_tmp_t:s0 tclass=file permissive=0 - It fails against recent versions of Sudo that specify an RPATH such as "/usr/lib/sudo": _dl_map_object() first searches for our LD_AUDIT library in RPATH, but open_path() fails to find our library in "/usr/lib/sudo//../tmp/" and crashes as soon as it reaches an overwritten hwcap-pointer. This problem can be solved by a 16-byte pattern "///../../../tmp/" (instead of the 8-byte pattern "/../tmp/") but the exploit's probability of success would be divided by two. - On Ubuntu, this ld.so "hwcap" exploit always fails, because of the following patch: Description: pro-actively disable LD_AUDIT for setuid binaries, regardless of where the libraries are loaded from. This is to try to make sure that CVE-2010-3856 cannot sneak back in. Upstream is unlikely to take this, since it limits the functionality of LD_AUDIT. Author: Kees Cook <kees(a)ubuntu.com&gt; Index: eglibc-2.15/elf/rtld.c =================================================================== --- eglibc-2.15.orig/elf/rtld.c 2012-05-09 10:05:29.456899131 -0700 +++ eglibc-2.15/elf/rtld.c 2012-05-09 10:38:53.952009069 -0700 <sip:539520090690700> @@ -2529,7 +2529,7 @@ while ((p = (strsep) (&str, ":")) != NULL) if (p[0] != '\0' && (__builtin_expect (! __libc_enable_secure, 1) - || strchr (p, '/') == NULL)) + )) { /* This is using the local malloc, not the system malloc. The memory can never be freed. */ ======================================================================== IV.1.4. ld.so ".dynamic" exploit ======================================================================== To exploit ld.so without the LD_AUDIT memory leak, we rely on a second vulnerability that we discovered in the offset2lib patch (CVE-2017-1000371): if we set RLIMIT_STACK to RLIM_INFINITY, and allocate nearly 1GB of stack memory (the maximum permitted by the kernel's 1/4 limit on the argument and environment strings) then the stack grows down to almost 0x80000000, and because the PIE is mapped above 0x80000000, the minimum distance between the end of the PIE's read-write segment and the start of the stack is 4KB (the stack guard-page). $ ./Linux_offset2lib 0x3f800000 Run #1... Run #2... Run #3... ... Run #796... Run #797... Run #798... CVE-2017-1000371 triggered 4007b000-400a0000 r-xp 00000000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400a0000-400a1000 r--p 00024000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400a1000-400a2000 rw-p 00025000 fd:00 8463588 <sip:008463588> /usr/lib/ld-2.24.so 400a2000-400a4000 r--p 00000000 00:00 0 [vvar] 400a4000-400a6000 r-xp 00000000 00:00 0 [vdso] 400a6000-400a8000 rw-p 00000000 00:00 0 400af000-40283000 r-xp 00000000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 40283000-40284000 ---p 001d4000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 40284000-40286000 r--p 001d4000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 40286000-40287000 rw-p 001d6000 fd:00 8463595 <sip:008463595> /usr/lib/libc-2.24.so 40287000-4028a000 rw-p 00000000 00:00 0 8000a000-8000c000 r-xp 00000000 00:26 25041 /tmp/Linux_offset2lib 8000c000-8000d000 r--p 00001000 00:26 25041 /tmp/Linux_offset2lib 8000d000-8002f000 rw-p 00002000 00:26 25041 /tmp/Linux_offset2lib 80030000-bf831000 rw-p 00000000 00:00 0 [heap] Note: in this example, the "[stack]" is incorrectly displayed as the "[heap]" by show_map_vma() (in fs/proc/task_mmu.c). This completes Step 1: we clash the stack with the PIE's read-write segment; we complete the remaining steps as in the "hwcap" exploit: - Step 2: we consume the initial stack expansion with 128KB of argv[] and envp[] pointers; - Step 3: we jump over the stack guard-page and into the PIE's read-write segment with llp_tmp's alloca() (in _dl_init_paths()); - Step 4b: we smash the PIE's read-write segment with llp_tmp's good-write and bad-write (in _dl_init_paths()); we can smash the following sections: + .data and .bss: but we discarded this application-specific approach; + .got: although protected by Full RELRO (Full RELocate Read-Only, GNU_RELRO and BIND_NOW) the .got is still writable when we smash it in _dl_init_paths(); however, within ld.so, the .got is written to but never read from, and we therefore discarded this approach; + .dynamic: our favored approach. On i386, the .dynamic section is an array of Elf32_Dyn structures (an int32 d_tag, and the union of uint32 d_val and uint32 d_ptr) that contains entries such as: - DT_STRTAB, a pointer to the PIE's .dynstr section (a read-only string table): its d_tag (DT_STRTAB) is read (by elf_get_dynamic_info()) before we smash it in _dl_init_paths(), but its d_ptr is read (by _dl_map_object_deps()) after we smash it in _dl_init_paths(); - DT_NEEDED, an offset into the .dynstr section: the pathname of a dependent library that must be loaded by _dl_map_object_deps(). If we overwrite the entire .dynamic section with the following 8-byte pattern (an Elf32_Dyn structure): - a DT_NEEDED d_tag, - a d_val equal to half the address of our own string table on the stack (16MB of argument strings, enough to defeat the 8MB stack randomization), then _dl_map_object_deps() reads the pathname of this dependent library from DT_STRTAB.d_ptr + DT_NEEDED.d_val = our_strtab/2 + our_strtab/2 = our_strtab, and loads our own library, as root. This 8-byte pattern is simple, but poses two problems: - DT_NEEDED is an int32 equal to 1, but we smash the .dynamic section with a string copy that cannot contain null-bytes: to solve this first problem we use DT_AUXILIARY instead, which is equivalent but equal to 0x7ffffffd; - ld.so crashes before it returns from dl_main() (before it calls _dl_init() and executes our library's _init() constructor): . in _dl_map_object_deps() because of our DT_AUXILIARY entry; . in version_check_doit() because we overwrote the DT_VERNEED entry; . in _dl_relocate_object() because we overwrote the DT_REL, DT_RELSZ, and DT_RELCOUNT entries. To solve this second problem, we could overwrite the .dynamic section with a more complicated pattern that repairs these entries, but our exploit's probability of success would decrease significantly. Instead, we take control of ld.so's execution flow as soon as _dl_map_object_deps() loads our library: - our library contains three executable LOAD segments, - but only the first and last segments are sanity-checked by _dl_map_object_from_fd() and _dl_map_segments(), - and all segments except the first are mmap()ed with MAP_FIXED by _dl_map_segments(), - so we can mmap() our second segment anywhere -- we mmap() it on top of ld.so's executable segment, - and return into our own code (instead of ld.so's) as soon as this second mmap() system-call returns. Probabilities The "hwcap" exploit taught us that this ".dynamic" exploit's probability of success depends on: - the size of the cushion below the .dynamic section, which can absorb the excess of "good-write" without crashing: the padding bytes between the start of the PIE's read-write segment and the start of its first read-write section; - the size of the cushion above the .dynamic section, which can absorb the excess of "good-write" and "bad-write" without crashing: the .got, .data, and .bss sections. If we guarantee that (cushion above .dynamic > good-write + bad-write), then the theoretical probability of success is approximately: MIN(cushion below .dynamic, good-write) / max stack randomization The maximum size of the cushion below the .dynamic section is 4KB (one page) and hence the maximum probability of success is 4KB/8MB=1/2048. In practice, on Ubuntu 16.04.2: - the highest probability is 1/2589 (/bin/su) and the lowest probability is 1/9225 (/usr/lib/eject/dmcrypt-get-device); - each run uses 1GB of memory and takes 1.5 seconds (on a 4GB Virtual Machine); - this ld.so ".dynamic" exploit has a good chance of obtaining a root-shell after 2589 * 1.5 seconds ~= 1 hour. ======================================================================== IV.1.5. /bin/su ======================================================================== As we were drafting this advisory, we discovered a general method for completing Step 1 (Clash) of the stack-clash exploitation: the Linux kernel limits the size of the command-line arguments and environment variables to 1/4 of the RLIMIT_STACK, but it imposes this limit on the argument and environment strings, not on the argv[] and envp[] pointers to these strings (CVE-2017-1000365). On i386, if we set RLIMIT_STACK to RLIM_INFINITY, the maximum number of argv[] and envp[] pointers is 1G (1/4 of the RLIMIT_STACK, divided by 1B, the minimum size of an argument or environment string). In theory, the maximum size of the initial stack is therefore 1G*(1B+4B)=5GB. In practice, this would exhaust the address-space and allows us to clash the stack with the memory region that is mapped below, without an application-specific memory leak. This discovery allowed us to write alternative versions of our stack-clash exploits; for example: - an ld.so "hwcap" exploit against Ubuntu: we replace the LD_AUDIT memory leak with 2GB of stack memory (1GB of argument and environment strings, and 1GB of argv[] and envp[] pointers) and replace the LD_AUDIT library with an LD_PRELOAD library; - an ld.so ".dynamic" exploit against systems vulnerable to offset2lib: we reach the end of the PIE's read-write segment with only 128MB of stack memory (argument and environment strings and pointers). These proofs-of-concept demonstrate a general method for completing Step 1 (Clash), but they are much slower than their original versions (10-20 seconds per run) because they pass millions of argv[] and envp[] pointers to execve(). Moreover, this discovery allowed us to exploit SUID binaries through general methods that do not depend on application-specific or ld.so vulnerabilities; if a SUID binary calls setlocale(LC_ALL, ""); and gettext() (or a derivative such as strerror() or _()), then it is exploitable: - Step 1: we clash the stack with the heap through millions of argument and environment strings and pointers; - Step 2: we consume the initial stack expansion with 128KB of argument and environment pointers; - Step 3: we jump over the stack guard-page and into the heap with the alloca()tion of the LANGUAGE environment variable in gettext(); - Step 4a: we smash the stack with the malloc()ation of the OUTPUT_CHARSET environment variable in gettext() and thus gain control of eip. For example, we exploited Debian's /bin/su (from the shadow-utils): its main() function calls setlocale() and save_caller_context(), which calls gettext() (through _()) if its stdin is not a tty. Debian 8.5 Debian 8.5 is vulnerable to CVE-2016-3672: we set RLIMIT_STACK to RLIM_INFINITY and disable ASLR, clash the stack with the heap through 2GB of argument and environment strings and pointers (1GB of strings, 1GB of pointers), and return-into-libc's system() or __libc_dlopen(): - the system() version uses 4GB of memory (2GB in the /bin/su process, and 2GB in the process fork()ed by system()); - the __libc_dlopen() version uses only 2GB of memory, but ebp must point to our smashed data on the stack. Debian 8.6 Debian 8.6 is vulnerable to offset2lib but not to CVE-2016-3672: we must brute-force the libc's ASLR (8 bits of entropy), but we clash the stack with the heap through only 128MB of argument and environment strings and pointers -- this /bin/su exploit can be parallelized. ======================================================================== IV.1.6. Grsecurity/PaX ======================================================================== https://grsecurity.net/ In 2010, grsecurity/PaX introduced a configurable stack guard-page: its size can be modified through /proc/sys/vm/heap_stack_gap and is 64KB by default (unlike the hard-coded 4KB stack guard-page in the vanilla kernel). Unfortunately, a 64KB stack guard-page is not large enough, and can be jumped over with ld.so or gettext() (CVE-2017-1000377); for example, we were able to gain eip control against Sudo, but we were unable to obtain a root-shell or gain eip control against another application, because grsecurity/PaX imposes the following security measures: - it restricts the RLIMIT_STACK of SUID binaries to 8MB, which prevents us from switching to the legacy bottom-up mmap() layout (Step 1); - it restricts the argument and environment strings to 512KB, which prevents us from clashing the stack through megabytes of command-line arguments and environment variables (Step 1); - it randomizes the PIE and libraries with 16 bits of entropy (instead of 8 bits in vanilla), which prevents us from brute-forcing the ASLR and returning-into-libc (Step 4a); - it implements /proc/sys/kernel/grsecurity/deter_bruteforce (enabled by default), which limits the number of SUID crashes to 1 every 15 minutes (all Steps) and makes exploitation impossible. Sudo The vulnerability that we discovered in Sudo's get_process_ttyname() (CVE-2017-1000367) allows us to: - Step 1: clash the stack with 3GB of heap memory from the filesystem (directory pathnames) and bypass grsecurity/PaX's 512KB limit on the argument and environment strings; - Step 2: consume the 128KB of initial stack expansion with 3MB of recursive function calls and avoid grsecurity/PaX's 8MB restriction on the RLIMIT_STACK; - Step 3: jump over grsecurity/PaX's 64KB stack guard-page with a 128KB (MAX_ARG_STRLEN) alloca()tion of the LANGUAGE environment variable in gettext(); - Step 4a: smash the stack with a 128KB (MAX_ARG_STRLEN) malloc()ation of the OUTPUT_CHARSET environment variable in gettext() -- the "smashing-chunk" -- and thus gain control of eip. In Step 1, we nearly exhaust the address-space until finally malloc() switches from brk() to 1MB mmap()s and reaches the start of the stack with the very last 1MB mmap() that we allocate. The exact amount of memory that we must allocate to reach the stack with our last 1MB mmap() depends on the sum of three random variables: the 256MB randomization of the stack, the 64MB randomization of the heap, and the 1MB randomization of the NULL region. To maximize the probability of jumping over the stack guard-page, into our last 1MB mmap() below the stack, and overwriting a return-address on the stack with our smashing-chunk: - (Step 1) we must allocate the mean amount of memory to reach the stack with our last 1MB mmap(): the sum of three uniform random variables is not uniform (https://en.wikipedia.org/wiki/Irwin-Hall_distribution), but the values within the 256MB-64MB-1MB=191MB plateau at the center of this bell-shaped probability distribution occur with a uniform and maximum probability of (1MB*64MB)/(1MB*64MB*256MB)=1/256MB; - (Step 1) the end of our last 1MB mmap() must be allocated at a distance within [stack guard-page (64KB), guard-page jump (128KB)] below the start of the stack: the guard-page jump (Step 3) then lands at a distance d within [0, guard-page jump - stack guard-page (64KB)] below the end of our last 1MB mmap(); - (Step 4a) the end of our smashing-chunk must be allocated at the end of our last 1MB mmap(), above the landing-point of the guard-page jump: our smashing-chunk then overwrites a return-address on the stack, below the landing-point of the guard-page jump. In theory, this probability is roughly: SUM(d = 1; d < guard-page jump - stack guard-page; d++) d / (256MB*1MB) ~= ((guard-page jump - stack guard-page)^2 / 2) / (256MB*1MB) ~= 1 / 2^17 In practice, we tested this Sudo proof-of-concept on an i386 Debian 8.6 protected by the linux-grsec package from the jessie-backports, but we manually disabled /proc/sys/kernel/grsecurity/deter_bruteforce: - it uses 3GB of memory, and 800K on-disk inodes; - it takes 5.5 seconds per run (on a 4GB Virtual Machine); - it has a good chance of gaining eip control after 2^17 * 5.5 seconds = 200 hours; in our test: PAX: From 192.168.56.1: execution attempt in: <heap>, 1b068000-a100d000 1b068000 PAX: terminating task: /usr/bin/sudo( 1 ):25465, uid/euid: 1000/0, PC: 41414141, SP: b8844f30 PAX: bytes at PC: 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 PAX: bytes at SP-4: 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 41414141 However, brute-forcing the ASLR to obtain a root-shell would take ~1500 years and makes exploitation impossible. Moreover, if we enable /proc/sys/kernel/grsecurity/deter_bruteforce, gaining eip control would take ~1365 days, and obtaining a root-shell would take thousands of years. ======================================================================== IV.1.7. 64-bit exploitation ======================================================================== Introduction The address-space of a 64-bit process is so vast that we initially thought it was impossible to clash the stack with another memory region; we were wrong. Linux's execve() first randomizes the end of the mmap region (which grows top-down by default) and then randomizes the end of the stack region (which grows down, on x86). On amd64, the initial mmap-stack distance (between the end of the mmap region and the end of the stack region) is minimal when RLIMIT_STACK is lower than or equal to MIN_GAP (mmap_base() in arch/x86/mm/mmap.c), and then: - the end of the mmap region is equal to (as calculated by arch_pick_mmap_layout() in arch/x86/mm/mmap.c): mmap_end = TASK_SIZE - MIN_GAP - arch_mmap_rnd() where: . TASK_SIZE is the highest address of the user-space (0x7ffffffff000) . MIN_GAP = 128MB + stack_maxrandom_size() . stack_maxrandom_size() is ~16GB (or ~4GB if the kernel is vulnerable to CVE-2015-1593, but we do not consider this case here) . arch_mmap_rnd() is a random variable in the [0B,1TB] range - the end of the stack region is equal to (as calculated by randomize_stack_top() in fs/binfmt_elf.c): stack_end = TASK_SIZE - "stack_rand" where: . "stack_rand" is a random variable in the [0, stack_maxrandom_size()] range - the initial mmap-stack distance is therefore equal to: stack_end - mmap_end = MIN_GAP + arch_mmap_rnd() - "stack_rand" = 128MB + stack_maxrandom_size() - "stack_rand" + arch_mmap_rnd() = 128MB + StackRand + MmapRand where: . StackRand = stack_maxrandom_size() - "stack_rand", a random variable in the [0B,16GB] range . MmapRand = arch_mmap_rnd(), a random variable in the [0B,1TB] range Consequently, the minimum initial mmap-stack distance is only 128MB (CVE-2017-1000379), and: - On kernels vulnerable to offset2lib, the heap of a PIE (which is mapped at the end of the mmap region) is mapped below and close to the stack with a good probability (~1/700). We can therefore clash the stack with the heap in Step 1, jump over the stack guard-page and into the heap in Step 3, and smash the stack with the heap and gain control of rip in Step 4a (after 6 hours on average). However, because the addresses of all executable regions contain null-bytes, and because most of our stack-smashes in Step 4a are string operations (except the getaddrinfo() method), we were unable to transform such a rip control into arbitrary code execution. - On all kernels, either a PIE or ld.so is mapped directly below the stack with a good probability (~1/17000) -- the end of the PIE's or ld.so's read-write segment is then equal to the start of the stack guard-page. We can therefore adapt our ld.so "hwcap" exploit to amd64 and obtain root privileges through most SUID binaries on most Linux distributions (after 5 hours on average). Kernels vulnerable to offset2lib, local Exim proof-of-concept Exim's binary is usually a PIE, mapped at the end of the mmap region; and the heap, which always grows up and is randomized above the end of the binary, is therefore randomized above the end of the mmap region (arch_randomize_brk() in arch/x86/kernel/process.c): heap_start = mmap_end + "heap_rand" where "heap_rand" is a random variable in the [0B,32MB] range (negligible and ignored here). For example, on Debian 8.5: # cat /proc/"`pidof -s /usr/sbin/exim4`"/maps ... 7fa6410d6000-7fa6411c8000 r-xp 00000000 08:01 14574 <sip:0114574> /usr/sbin/exim4 7fa6413b4000-7fa6413bd000 rw-p 00000000 00:00 0 7fa6413c5000-7fa6413c7000 rw-p 00000000 00:00 0 7fa6413c7000-7fa6413c9000 r--p 000f1000 08:01 14574 <sip:0114574> /usr/sbin/exim4 7fa6413c9000-7fa6413d2000 rw-p 000f3000 08:01 14574 <sip:0114574> /usr/sbin/exim4 7fa6413d2000-7fa6413d7000 rw-p 00000000 00:00 0 7fa641b34000-7fa641b76000 rw-p 00000000 00:00 0 [heap] 7ffdf3e53000-7ffdf3ed6000 rw-p 00000000 00:00 0 [stack] 7ffdf3f3c000-7ffdf3f3e000 r-xp 00000000 00:00 0 [vdso] 7ffdf3f3e000-7ffdf3f40000 r--p 00000000 00:00 0 [vvar] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] To reach the start of the stack with the end of the heap (through the -p memory leak in Exim) in Step 1 of our stack-clash, we must minimize the initial heap-stack distance, and hence the initial mmap-stack distance, and set RLIMIT_STACK to MIN_GAP (~16GB). This limits the size of our -p argument strings on the stack to 16GB/4=4GB, and because we then leak the same amount of heap memory through -p, the initial heap-stack distance must be: - longer than 4GB (the stack must be able to contain the -p argument strings); - shorter than 8GB (the end of the heap must be able to reach the start of the stack during the -p memory leak). The initial heap-stack distance (approximately the initial mmap-stack distance, 128MB + StackRand + MmapRand, but we ignore the 128MB term here) follows a trapezoidal Irwin-Hall distribution, and the [4GB,8GB] range is within the first non-uniform area of this trapezoid, so the probability that the initial heap-stack distance is in this range is: SUM(d = 4GB; d < 8GB; d++) d / (16GB * 1TB) = SUM(d = 0; d < 4GB; d++) (4GB + d) / (16GB * 1TB) = SUM(d = 0; d < 2^32; d++) (2^32 + d) / (2^34 * 2^40) ~= ((2^32)*(2^32) + (2^32)*(2^32) / 2) / (2^74) ~= 3 / 2^11 ~= 1 / 682 The probability of gaining rip control after the heap reaches the stack is ~1/16 (as calculated by a 64-bit version of the small helper program presented in IV.1.1.), and the final probability of gaining rip control with our local Exim proof-of-concept is: (3 / 2^11) * (1/16) ~= 1 / 10922 On our 8GB Debian 8.7 test machine, this proof-of-concept takes roughly 2 seconds per run, and has a good chance of gaining rip control after 10922 * 2 seconds ~= 6 hours: # gdb /usr/sbin/exim4 core.6049 GNU gdb (Debian 7.7.1+dfsg-5) 7.7.1 ... This GDB was configured as "x86_64-linux-gnu". ... Core was generated by `/usr/sbin/exim4 -p0000000000000000000000000000000000000000000000000000000000000'. Program terminated with signal SIGSEGV, Segmentation fault. #0 __memcpy_sse2_unaligned () at ../sysdeps/x86_64/multiarch/memcpy-sse2-unaligned.S:41 41 ../sysdeps/x86_64/multiarch/memcpy-sse2-unaligned.S: No such file or directory. (gdb) x/i $rip => 0x7ffab1be7061 <__memcpy_sse2_unaligned+65>: retq (gdb) x/xg $rsp 0x7ffb9b294a48: 0x4141414141414141 Kernels vulnerable to offset2lib, ld.so ".dynamic" exploit Since kernels vulnerable to offset2lib map PIEs below and close to the stack, we tried to adapt our ld.so ".dynamic" exploit to amd64. MIN_GAP guarantees a minimum distance of 128MB between the theoretical end of the mmap region and the end of the stack, but the stack then grows down to store the argument and environment strings, and may therefore occupy the theoretical end of the mmap region (where nothing has been mapped yet). Consequently, the end of the mmap region (where the PIE will be mapped) slides down to the first available address, directly below the stack guard-page and the initial stack expansion (described in II.3.2.): 7ffbb7e51000-7ffbb7e53000 r-xp 00000000 fd:03 4465810 <sip:034465810> /tmp/test64 ... 7ffbb8053000-7ffbb808c000 rw-p 00002000 fd:03 4465810 <sip:034465810> /tmp/test64 7ffbb808d000-7ffc180ae000 rw-p 00000000 00:00 0 [heap] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] Note: in this example, the "[stack]" is, again, incorrectly displayed as the "[heap]" by show_map_vma() (in fs/proc/task_mmu.c). This layout is ideal for our stack-clash exploits, but poses an unexpected problem: because the PIE is mapped directly below the stack, the stack cannot grow anymore, and the only free stack space is the initial stack expansion (128KB) minus the argv[] and envp[] pointers (which are stored there, as mentioned in II.3.2.): - on the one hand, many argv[] and envp[] pointers, and hence many argument and environment strings, result in a higher probability of mapping the PIE directly below the stack; - on the other hand, many argv[] and envp[] pointers consume most of the initial stack expansion and do not leave enough free stack space for ld.so to operate. In practice, we pass 96KB of argv[] pointers to execve(), thus leaving 32KB of free stack space for ld.so, and since the size of a pointer is 8B, and the maximum size of an argument string is 128KB, we also pass 96KB/8B*128KB=1.5GB of argument strings to execve(). The resulting probability of mapping the PIE directly below the stack is: SUM(s = 0; s < 1.5GB - 128MB; s++) s / (16GB * 1TB) ~= ((1.5GB - 128MB)^2 / 2) / (16GB * 1TB) ~= 1 / 17331 On a 4GB Virtual Machine, each run takes 1 second, and 17331 runs take roughly 5 hours. But we cannot add more uncertainty to this exploit, and because of the problems discussed in IV.1.4. (null-bytes in DT_NEEDED, but also in DT_AUXILIARY on 64-bit, etc), we were unable to overwrite the .dynamic section with a pattern that does not significantly decrease this exploit's probability of success. All kernels, ld.so "hwcap" exploit Despite this failure, we had an intuition: when the PIE is mapped directly below the stack, the stack layout should be deterministic -- rsp should point into the 128KB of initial stack expansion, at a 32KB offset above the start of the stack, and the only entropy should be the 8KB of sub-page randomization within the stack (arch_align_stack() in arch/x86/kernel/process.c). The following output of our small test program confirmed this intuition (the fourth field is the distance between the start of the stack and our main()'s rsp when the PIE is mapped directly below the stack): $ grep -w sp test64.out | sort -nk4 sp 0x7ffbc271ff38 -> 28472 sp 0x7ffbb95ccff8 -> 28664 sp 0x7ffbaf062678 -> 30328 sp 0x7ffbb08736e8 -> 30440 sp 0x7ffbbc616d18 -> 32024 sp 0x7ffbc1a0fdb8 -> 32184 sp 0x7ffbb9c28ff8 -> 32760 sp 0x7ffbdbf4c178 -> 33144 sp 0x7ffbb39bc1c8 -> 33224 sp 0x7ffbebb86838 -> 34872 Surprisingly, the output of this test program contained additional valuable information: 7ffbb7e51000-7ffbb7e53000 r-xp 00000000 fd:03 4465810 <sip:034465810> /tmp/test64 7ffbb8034000-7ffbb8037000 rw-p 00000000 00:00 0 7ffbb804d000-7ffbb804e000 rw-p 00000000 00:00 0 7ffbb804e000-7ffbb8050000 r--p 00000000 00:00 0 [vvar] 7ffbb8050000-7ffbb8052000 r-xp 00000000 00:00 0 [vdso] 7ffbb8052000-7ffbb8053000 r--p 00001000 fd:03 4465810 <sip:034465810> /tmp/test64 7ffbb8053000-7ffbb808c000 rw-p 00002000 fd:03 4465810 <sip:034465810> /tmp/test64 7ffbb808d000-7ffc180ae000 rw-p 00000000 00:00 0 [heap] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] - the distance between the end of the read-execute segment of our test program and the start of its read-only and read-write segments is approximately 2MB; indeed, for every ELF on amd64: $ readelf -a /usr/bin/su | grep -wA1 LOAD LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x00000000000061b4 0x00000000000061b4 R E 200000 LOAD 0x0000000000006888 0x0000000000206888 0x0000000000206888 0x0000000000000798 0x00000000000007d0 RW 200000 $ readelf -a /lib64/ld-linux-x86-64.so.2 | grep -wA1 LOAD LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000001fad0 0x000000000001fad0 R E 200000 LOAD 0x000000000001fb60 0x000000000021fb60 0x000000000021fb60 0x000000000000141c 0x00000000000015e8 RW 200000 - several objects are actually mapped inside this ~2MB hole: [vdso], [vvar], and two anonymous mappings (7ffbb804d000-7ffbb804e000 and 7ffbb8034000-7ffbb8037000). This discovery allowed us to adapt our ld.so "hwcap" exploit to amd64: - we choose hardware-capabilities that are small enough to be mapped inside this ~2MB hole, but large enough to defeat the 8KB sub-page randomization of the stack; - we jump over the stack guard-page, and over the read-only and read-write segments of the PIE, and exploit ld.so as we did on i386. This exploit's probability of success is therefore 1 when the PIE is mapped directly below the stack, and its final probability of success is ~1/17331: it takes 1 second per run, and has a good chance of obtaining a root-shell after 5 hours. Moreover, it works on all kernels: if a SUID binary is not a PIE, or if the kernel is not vulnerable to offset2lib, we simply jump over ld.so's read-write segment, instead of the PIE's. For example, on Fedora 25, when the exploit succeeds and loads our own library /var/tmp/a (the 7ffbabbef000-7ffbabca7000 mapping contains the hardware-capabilities that we smash): 55a0c9e8d000-55a0c9e91000 r-xp 00000000 fd:00 112767 <sip:00112767> /usr/libexec/cockpit-polkit 55a0ca091000-55a0ca093000 rw-p 00004000 fd:00 112767 <sip:00112767> /usr/libexec/cockpit-polkit 7ffbab603000-7ffbab604000 r-xp 00000000 fd:00 4866583 <sip:004866583> /var/tmp/a 7ffbab604000-7ffbab803000 ---p 00001000 fd:00 4866583 <sip:004866583> /var/tmp/a 7ffbab803000-7ffbab804000 r--p 00000000 fd:00 4866583 <sip:004866583> /var/tmp/a 7ffbab804000-7ffbaba86000 rw-p 00000000 00:00 0 7ffbaba86000-7ffbabaab000 r-xp 00000000 fd:00 4229637 <sip:004229637> /usr/lib64/ld-2.24.so 7ffbabbef000-7ffbabca7000 rw-p 00000000 00:00 0 7ffbabca7000-7ffbabca9000 r--p 00000000 00:00 0 [vvar] 7ffbabca9000-7ffbabcab000 r-xp 00000000 00:00 0 [vdso] 7ffbabcab000-7ffbabcad000 rw-p 00025000 fd:00 4229637 <sip:004229637> /usr/lib64/ld-2.24.so 7ffbabcad000-7ffbabcae000 rw-p 00000000 00:00 0 7ffbabcaf000-7ffc0bcf0000 rw-p 00000000 00:00 0 [stack] ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0 [vsyscall] ======================================================================== IV.2. OpenBSD ======================================================================== ======================================================================== IV.2.1. Maximum RLIMIT_STACK vulnerability (CVE-2017-1000372) ======================================================================== The OpenBSD kernel limits the maximum size of the user-space stack (RLIMIT_STACK) to MAXSSIZ (32MB); the execve() system-call allocates a MAXSSIZ memory region for the stack and divides it in two: - the second part, effectively the user-space stack, is mapped PROT_READ|PROT_WRITE at the end of this stack memory region, and occupies RLIMIT_STACK bytes (by default 8MB for root processes, and 4MB for user processes); - the first part, effectively a large stack guard-page, is mapped PROT_NONE at the start of this stack memory region, and occupies MAXSSIZ - RLIMIT_STACK bytes. Unfortunately, we discovered that if an attacker sets RLIMIT_STACK to MAXSSIZ, he eliminates the PROT_NONE part of the stack region, and hence the stack guard-page itself (CVE-2017-1000372). For example: # sh -c 'ulimit -S -s; procmap -a -P' 8192 Start End Size Offset rwxpc RWX I/W/A Dev Inode - File ... 14cf6000-14cfafff 20k 00000000 r-xp+ (rwx) 1/0/0 00:03 52375 <sip:0352375> - /usr/sbin/procmap [0xdb29ce10] ... 84a7b000-84a7bfff 4k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ anon ] cd7db000-cefdafff 24576k 00000000 ---p+ (rwx) 1/0/0 00:00 0 - [ stack ] cefdb000-cf7cffff 8148k 00000000 rw-p+ (rwx) 1/0/0 00:00 0 - [ stack ] cf7d0000-cf7dafff 44k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ stack ] total 10348k # sh -c 'ulimit -S -s `ulimit -H -s`; procmap -a -P' Start End Size Offset rwxpc RWX I/W/A Dev Inode - File ... 1a47f000-1a483fff 20k 00000000 r-xp+ (rwx) 1/0/0 00:03 52375 <sip:0352375> - /usr/sbin/procmap [0xdb29ce10] ... 8a3c8000-8a3c9fff 8k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ anon ] cd7c9000-cf7bffff 32732k 00000000 rw-p+ (rwx) 1/0/0 00:00 0 - [ stack ] cf7c0000-cf7c8fff 36k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ stack ] total 33992k A remote attacker cannot exploit this vulnerability, because he cannot modify RLIMIT_STACK; but a local attacker can set RLIMIT_STACK to MAXSSIZ, and: - Step 1: malloc()ate almost 2GB of heap memory, until the heap reaches the start of the stack region; - Steps 2 and 3: consume MAXSSIZ (32MB) of stack memory, until the stack-pointer reaches the start of the stack region (Step 2) and moves into the heap (Step 3); - Step 4: smash the stack with the heap (Step 4a) or smash the heap with the stack (Step 4b). ======================================================================== IV.2.2. Recursive qsort() vulnerability (CVE-2017-1000373) ======================================================================== To complete Step 2, a recursive function is needed, and the first possibly recursive function that we investigated is qsort(). On the one hand, glibc's _quicksort() function (in stdlib/qsort.c) is non-recursive (iterative): it uses a small, specialized stack of partition structures (two pointers, low and high), and guarantees that no more than 32 partitions (on i386) or 64 partitions (on amd64) are pushed onto this stack, because it always pushes the larger of two sub-partitions and iterates on the smaller partition. On the other hand, BSD's qsort() function is recursive: it always recurses on the first sub-partition, and iterates on the second sub-partition; but instead, it should always recurse on the smaller sub-partition, and iterate on the larger sub-partition (CVE-2017-1000373 in OpenBSD, CVE-2017-1000378 in NetBSD, and CVE-2017-1082 in FreeBSD). In theory, because BSD's qsort() is not randomized, an attacker can construct a pathological input array of N elements that causes qsort() to deterministically recurse N times. In practice, because this qsort() uses the median-of-three medians-of-three selection of a pivot element (the "ninther"), our attack constructs an input array of N elements that causes qsort() to recurse N/4 times. ======================================================================== IV.2.3. /usr/bin/at proof-of-concept ======================================================================== /usr/bin/at is SGID-crontab (which can be escalated to full root privileges) because it must be able to create ("at -t"), list ("at -l"), and remove ("at -r") job-files in the /var/cron/atjobs directory: -r-xr-sr-x 4 root crontab 31376 Jul 26 2016 /usr/bin/at drwxrwx--T 2 root crontab 512 Jul 26 2016 /var/cron/atjobs To demonstrate that OpenBSD's RLIMIT_STACK and qsort() vulnerabilities can be transformed into powerful primitives such as heap corruption, we developed a proof-of-concept against "at -l" (the list_jobs() function): - Step 1 (Clash): first, list_jobs() malloc()ates an atjob structure for each file in /var/cron/atjobs -- if we create 40M job-files, then the heap reaches the stack, but we do not exhaust the address-space; - Steps 2 and 3 (Run and Jump): second, list_jobs() qsort()s the malloc()ated jobs -- if we construct their time-stamps with our qsort() attack, then we can cause qsort() to recurse 40M/4=10M times and consume at least 10M*4B=40MB of stack memory (each recursive call to qsort() consumes at least 4B, the return-address) and move the stack-pointer into the heap; - Step 4b (Smash the heap with the stack): last, list_jobs() free()s the malloc()ated jobs, and abort()s with an error message -- OpenBSD's hardened malloc() implementation detects that the heap has been corrupted by the last recursive calls to qsort(). This naive version of our /usr/bin/at proof-of-concept poses two major problems: - Our pathological input array of N=40M elements cannot be sorted (Step 2 never finishes because it exhibits qsort()'s worst-case behavior, N^2). To solve this problem, we divide the input array in two: . the first, pathological part contains only n=(33MB/176B)*4=768K elements that are needed to complete Steps 2 and 3, and cause qsort() to recurse n/4 times and consume (n/4)*176B=33MB of stack memory (MAXSSIZ+1MB) as each recursive call to qsort() consumes 176B of stack memory; . the second, innocuous part contains the remaining N-n=39M elements that are needed to complete Step 1, but not Steps 2 and 3, and are therefore swapped into the second, iterative partition of the first recursive call to qsort(). - We were unable to create 40M files in /var/cron/atjobs: after one week, OpenBSD's default filesystem (ffs) had created only 4M files, and the rate of file creation had dropped from 25 files/second to 4 files/second. We did not solve this problem, but nevertheless wanted to validate our proof-of-concept: . we transformed it into an LD_PRELOAD library that intercepts calls to readdir() and fstatat(), and pretends that our 40M files in /var/cron/atjobs exist; . we made /var/cron/atjobs world-readable and LD_PRELOADed our library into a non-SGID copy of /usr/bin/at; . after about an hour, "at" reports random heap corruptions: # chmod o+r /var/cron/atjobs # chmod o+r /var/cron/at.deny $ ulimit -c 0 $ ulimit -S -d `ulimit -H -d` $ ulimit -S -s `ulimit -H -s` $ ulimit -S -a ... coredump(blocks) 0 data(kbytes) 3145728 stack(kbytes) 32768 ... $ cp /usr/bin/at . $ LD_PRELOAD=./OpenBSD_at.so ./at -l -v -q x > /dev/null initializing jobkeys finalizing jobkeys reading jobs 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% sorting jobs at(78717) in free(): error: chunk info corrupted Abort trap $ LD_PRELOAD=./OpenBSD_at.so ./at -l -v -q x > /dev/null initializing jobkeys finalizing jobkeys reading jobs 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% sorting jobs at(14184) in free(): error: modified chunk-pointer 0xcd6d0120 Abort trap ======================================================================== IV.3. NetBSD ======================================================================== Like OpenBSD, NetBSD is vulnerable to the maximum RLIMIT_STACK vulnerability (CVE-2017-1000374): if a local attacker sets RLIMIT_STACK to MAXSSIZ, he eliminates the PROT_NONE part of the stack region -- the stack guard-page itself. Unlike OpenBSD, however, NetBSD: - defines MAXSSIZ to 64MB on i386 (128MB on amd64); - maps the run-time link-editor ld.so directly below the stack region, even if ASLR is enabled (CVE-2017-1000375): $ sh -c 'ulimit -S -s; pmap -a -P' 2048 Start End Size Offset rwxpc RWX I/W/A Dev Inode - File 08048000-0804dfff 24k 00000000 r-xp+ (rwx) 1/0/0 00:00 21706 <sip:0021706> - /usr/bin/pmap [0xc5c8f0b8] ... bbbee000-bbbfefff 68k 00000000 r-xp+ (rwx) 1/0/0 00:00 107525 <sip:00107525> - /libexec/ld.elf_so [0xc535f580] bbbff000-bbbfffff 4k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ anon ] bbc00000-bf9fffff 63488k 00000000 ---p+ (rwx) 1/0/0 00:00 0 - [ stack ] bfa00000-bfbeffff 1984k 00000000 rw-p+ (rwx) 1/0/0 00:00 0 - [ stack ] bfbf0000-bfbfffff 64k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ stack ] total 9528k $ sh -c 'ulimit -S -s `ulimit -H -s`; pmap -a -P' Start End Size Offset rwxpc RWX I/W/A Dev Inode - File 08048000-0804dfff 24k 00000000 r-xp+ (rwx) 1/0/0 00:00 21706 <sip:0021706> - /usr/bin/pmap [0xc5c8f0b8] ... bbbee000-bbbfefff 68k 00000000 r-xp+ (rwx) 1/0/0 00:00 107525 <sip:00107525> - /libexec/ld.elf_so [0xc535f580] bbbff000-bbbfffff 4k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ anon ] bbc00000-bfbeffff 65472k 00000000 rw-p+ (rwx) 1/0/0 00:00 0 - [ stack ] bfbf0000-bfbfffff 64k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ stack ] total 73016k # cp /usr/bin/pmap . # paxctl +A ./pmap # sh -c 'ulimit -S -s `ulimit -H -s`; ./pmap -a -P' Start End Size Offset rwxpc RWX I/W/A Dev Inode - File 08048000-0804dfff 24k 00000000 r-xp+ (rwx) 1/0/0 00:00 172149 <sip:00172149> - /tmp/pmap [0xc5cb3c64] ... bbbee000-bbbfefff 68k 00000000 r-xp+ (rwx) 1/0/0 00:00 107525 <sip:00107525> - /libexec/ld.elf_so [0xc535f580] bbbff000-bbbfffff 4k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ anon ] bbc00000-bf1bffff 55040k 00000000 rw-p+ (rwx) 1/0/0 00:00 0 - [ stack ] bf1c0000-bf1cefff 60k 00000000 rw-p- (rwx) 1/0/0 00:00 0 - [ stack ] total 62580k Consequently, a local attacker can set RLIMIT_STACK to MAXSSIZ, eliminate the stack guard-page, and: - skip Step 1, because ld.so's read-write segment is naturally mapped directly below the stack region; - Steps 2 and 3: consume 64MB (MAXSSIZ) of stack memory (for example, through the recursive qsort() vulnerability, CVE-2017-1000378) until the stack-pointer reaches the start of the stack region (Step 2) and moves into ld.so's read-write segment (Step 3); - Step 4b: smash ld.so's read-write segment with the stack. We did not try to exploit this vulnerability, nor did we search for a vulnerable SUID or SGID binary, but we wrote a simple proof-of-concept, and some of the following crashes may be exploitable: $ sh -c 'ulimit -S -s `ulimit -H -s`; ./NetBSD_CVE-2017-1000375 0x04000000' [1] Segmentation fault ./NetBSD_CVE-201... $ sh -c 'ulimit -S -s `ulimit -H -s`; ./NetBSD_CVE-2017-1000375 0x03000000' ... $ sh -c 'ulimit -S -s `ulimit -H -s`; ./NetBSD_CVE-2017-1000375 0x03ec5000' $ sh -c 'ulimit -S -s `ulimit -H -s`; ./NetBSD_CVE-2017-1000375 0x03ec5400' [1] Segmentation fault ./NetBSD_CVE-201... $ sh -c 'ulimit -S -s `ulimit -H -s`; gdb ./NetBSD_CVE-2017-1000375' GNU gdb (GDB) 7.7.1 ... (gdb) run 0x03ec5400 Program received signal SIGSEGV, Segmentation fault. 0xbbbf448d in _rtld_symlook_default () from /usr/libexec/ld.elf_so (gdb) x/i $eip => 0xbbbf448d <_rtld_symlook_default+185>: mov %edx,(%esi,%edi,4) (gdb) info registers esi 0xbabae890 -1162155888 edi 0x0 0 ... (gdb) run 0x03ec5800 Program received signal SIGSEGV, Segmentation fault. 0xbbbf4465 in _rtld_symlook_default () from /usr/libexec/ld.elf_so (gdb) x/i $eip => 0xbbbf4465 <_rtld_symlook_default+145>: mov 0x4(%ecx),%edx (gdb) info registers ecx 0x41414141 1094795585 ... (gdb) run 0x03ec5c00 Program received signal SIGSEGV, Segmentation fault. 0xbbbf4408 in _rtld_symlook_default () from /usr/libexec/ld.elf_so (gdb) x/i $eip => 0xbbbf4408 <_rtld_symlook_default+52>: mov (%eax),%esi (gdb) info registers eax 0x41414141 1094795585 ... ======================================================================== IV.4. FreeBSD ======================================================================== ======================================================================== IV.4.1. setrlimit() RLIMIT_STACK vulnerability (CVE-2017-1085) ======================================================================== FreeBSD's kern_proc_setrlimit() function contains the following comment and code: /* * Stack is allocated to the max at exec time with only * "rlim_cur" bytes accessible. If stack limit is going * up make more accessible, if going down make inaccessible. */ if (limp->rlim_cur != oldssiz.rlim_cur) { ... if (limp->rlim_cur > oldssiz.rlim_cur) { prot = p->p_sysent->sv_stackprot; size = limp->rlim_cur - oldssiz.rlim_cur; addr = p->p_sysent->sv_usrstack - limp->rlim_cur; } else { prot = VM_PROT_NONE; size = oldssiz.rlim_cur - limp->rlim_cur; addr = p->p_sysent->sv_usrstack - oldssiz.rlim_cur; } ... (void)vm_map_protect(&p->p_vmspace->vm_map, addr, addr + size, prot, FALSE); } OpenBSD's and NetBSD's dosetrlimit() function contains the same comment, which accurately describes the layout of their user-space stack region. Unfortunately, FreeBSD's kern_proc_setrlimit() comment and code are incorrect, as hinted at in exec_new_vmspace(): /* * Destroy old address space, and allocate a new stack * The new stack is only SGROWSIZ large because it is grown * automatically in trap.c. */ and vm_map_stack_locked(): /* * We initially map a stack of only init_ssize. We will grow as * needed later. where init_ssize is SGROWSIZ (128KB), not MAXSSIZ (64MB on i386), because "init_ssize = (max_ssize < growsize) ? max_ssize : growsize;" (and max_ssize is MAXSSIZ, and growsize is SGROWSIZ). As a result, if a program calls setrlimit() to increase RLIMIT_STACK, vm_map_protect() may turn a read-only memory region below the stack into a read-write region (CVE-2017-1085), as demonstrated by the following proof-of-concept: % ./FreeBSD_CVE-2017-1085 Segmentation fault % ./FreeBSD_CVE-2017-1085 setrlimit to the max char at 0xbd155000: 41 ======================================================================== IV.4.2. Stack guard-page disabled by default (CVE-2017-1083) ======================================================================== The FreeBSD kernel implements a 4KB stack guard-page, and recent versions of the FreeBSD Installer offer it as a system hardening option. Unfortunately, it is disabled by default (CVE-2017-1083): % sysctl security.bsd.stack_guard_page security.bsd.stack_guard_page: 0 ======================================================================== IV.4.3. Stack guard-page vulnerabilities (CVE-2017-1084) ======================================================================== - If FreeBSD's stack guard-page is enabled, its entire logic is implemented in vm_map_growstack(): this function guarantees a minimum distance of 4KB (the stack guard-page) between the start of the stack and the end of the memory region that is mapped below (but the stack guard-page is not physically mapped into the address-space). Unfortunately, this guarantee is given only when the stack grows down and clashes with the memory region mapped below, but not if the memory region mapped below grows up and clashes with the stack: this vulnerability effectively eliminates the stack guard-page (CVE-2017-1084). In our proof-of-concept: . we allocate anonymous mmap()s of 4KB, until the end of an anonymous mmap() reaches the start of the stack [Step 1]; . we call a recursive function until the stack-pointer reaches the start of the stack and moves into the anonymous mmap() directly below [Step 2]; . but we do not jump over the stack guard-page, because each call to the recursive function allocates (and fully writes to) a 1KB stack-based buffer [Step 3]; . and we do not crash into the stack guard-page, because CVE-2017-1084 has effectively eliminated the stack guard-page in Step 1. # sysctl security.bsd.stack_guard_page=1 security.bsd.stack_guard_page: 0 -> 1 % ./FreeBSD_CVE-2017-FGPU char at 0xbfbde000: 41 - vm_map_growstack() implements most of the stack guard-page logic in the following code: /* * Growing downward. */ /* Get the preliminary new entry start value */ addr = stack_entry->start - grow_amount; /* * If this puts us into the previous entry, cut back our * growth to the available space. Also, see the note above. */ if (addr < end) { stack_entry->avail_ssize = max_grow; addr = end; if (stack_guard_page) addr += PAGE_SIZE; } where: . addr is the new start of the stack; . stack_entry->start is the old start of the stack; . grow_amount is the size of the stack expansion; . end is the end of the memory region below the stack. Unfortunately, the "addr < end" test should be "addr <= end": if addr, the new start of the stack, is equal to end, the end of the memory region mapped below, then the stack guard-page is eliminated (CVE-2017-1084). In our proof-of-concept: . we allocate anonymous mmap()s of 4KB, until the end of an anonymous mmap() reaches a randomly chosen distance below the start of the stack [Step 1]; . we call a recursive function until the stack-pointer reaches the start of the stack, and the stack expansion reaches the end of the anonymous mmap() below [Step 2]; . we do not jump over the stack guard-page, because each call to the recursive function allocates (and fully writes to) a 1KB stack-based buffer [Step 3]; . and we crash into the stack guard-page most of the time; . but we survive with a probability of 4KB/128KB=1/32 (grow_amount is always a multiple of SGROWSIZ, 128KB) because CVE-2017-1084 has effectively eliminated the stack guard-page in Step 2. % sysctl security.bsd.stack_guard_page security.bsd.stack_guard_page: 1 % sh -c 'while true; do ./FreeBSD_CVE-2017-FGPE; done' Segmentation fault char at 0xbe45e000: 41; final dist 6097 (24778705) Segmentation fault Segmentation fault Segmentation fault ... Segmentation fault Segmentation fault Segmentation fault char at 0xbd25e000: 41; final dist 7036 (43654012) Segmentation fault Segmentation fault Segmentation fault ... Segmentation fault Segmentation fault Segmentation fault char at 0xbd29e000: 41; final dist 5331 (43390163) Segmentation fault Segmentation fault Segmentation fault ... In contrast, if FreeBSD's stack guard-page is disabled, our proof-of-concept always survives: # sysctl security.bsd.stack_guard_page=0 security.bsd.stack_guard_page: 1 -> 0 % sh -c 'while true; do ./FreeBSD_CVE-2017-FGPE; done' char at 0xbe969000: 41; final dist 89894 (19488550) char at 0xbfa6d000: 41; final dist 74525 (1647389) char at 0xbf4df000: 41; final dist 78 (7471182) char at 0xbe9e4000: 41; final dist 112397 (18986765) char at 0xbf693000: 41; final dist 49811 (5685907) char at 0xbf533000: 41; final dist 51037 (7128925) char at 0xbd799000: 41; final dist 26043 (38167995) char at 0xbd54b000: 11; final dist 83754 (40585002) char at 0xbe176000: 41; final dist 36992 (27824256) char at 0xbfa91000: 41; final dist 57449 (1499241) char at 0xbd1b9000: 41; final dist 26115 (44328451) char at 0xbd1c8000: 41; final dist 94852 (44266116) char at 0xbf73a000: 41; final dist 22276 (5003012) char at 0xbe6b1000: 41; final dist 58854 (22341094) char at 0xbeb81000: 41; final dist 124727 (17295159) char at 0xbfb35000: 41; final dist 43174 (829606) ... - FreeBSD's thread library (libthr) mmap()s a secondary PROT_NONE stack guard-page at a distance RLIMIT_STACK below the end of the stack: # sysctl security.bsd.stack_guard_page=1 security.bsd.stack_guard_page: 0 -> 1 % sh -c 'exec procstat -v $$' PID START END PRT RES PRES REF SHD FLAG TP PATH 2779 0x8048000 0x8050000 r-x 8 8 1 0 CN-- vn /usr/bin/procstat ... 2779 0x28400000 0x28800000 rw- 22 35 2 0 ---- df 2779 0xbfbdf000 0xbfbff000 rwx 3 3 1 0 ---D df 2779 0xbfbff000 0xbfc00000 r-x 1 1 23 0 ---- ph % sh -c 'LD_PRELOAD=libthr.so exec procstat -v $$' PID START END PRT RES PRES REF SHD FLAG TP PATH 2798 0x8048000 0x8050000 r-x 8 8 1 0 CN-- vn /usr/bin/procstat ... 2798 0x28400000 0x28800000 rw- 23 35 2 0 ---- df 2798 0xbbbfe000 0xbbbff000 --- 0 0 0 0 ---- -- 2798 0xbfbdf000 0xbfbff000 rwx 3 3 1 0 ---D df 2798 0xbfbff000 0xbfc00000 r-x 1 1 23 0 ---- ph Unfortunately, this secondary stack guard-page does not mitigate the vulnerabilities that we discovered in FreeBSD's stack guard-page implementation: % sysctl security.bsd.stack_guard_page security.bsd.stack_guard_page: 1 % sh -c 'LD_PRELOAD=libthr.so ./FreeBSD_CVE-2017-FGPU' char at 0xbfbde000: 41 % sh -c 'while true; do LD_PRELOAD=libthr.so ./FreeBSD_CVE-2017-FGPE; done' Segmentation fault Segmentation fault Segmentation fault ... Segmentation fault Segmentation fault Segmentation fault char at 0xbda5e000: 41; final dist 3839 (35262207) Segmentation fault Segmentation fault Segmentation fault ... Segmentation fault Segmentation fault Segmentation fault char at 0xbdb1e000: 41; final dist 3549 (34475485) Segmentation fault Segmentation fault Segmentation fault ... ======================================================================== IV.4.4. Remote exploitation ======================================================================== Because FreeBSD's stack guard-page is disabled by default, we tried (and failed) to remotely exploit a test service vulnerable to: - an unlimited memory leak that allows us to malloc()ate gigabytes of memory; - a limited recursion that allows us to allocate up to 1MB of stack memory. FreeBSD's malloc() implementation (jemalloc) mmap()s 4MB chunks of anonymous memory that are aligned on multiples of 4MB. The first 4MB mmap() chunk starts at 0x28400000, and the last 4MB mmap() chunk ends at 0xbf800000, because the stack itself already ends at 0xbfc00000; but it is impossible to cover this final mmap-stack distance (almost 4MB) with the limited recursion (1MB) of our test service. ... break(0x80499b0) = 0 (0x0) break(0x8400000) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 672845824 (0x281ad000) mmap(0x285ad000,2437120,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 677040128 (0x285ad000) munmap(0x281ad000,2437120) = 0 (0x0) mmap(0x0,8388608,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 679477248 (0x28800000) munmap(0x28c00000,4194304) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 683671552 (0x28c00000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 687865856 (0x29000000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 692060160 (0x29400000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 696254464 (0x29800000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = 700448768 (0x29c00000) ... mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = -1103101952 (0xbe400000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = -1098907648 (0xbe800000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = -1094713344 (0xbec00000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = -1090519040 (0xbf000000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) = -1086324736 (0xbf400000) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x8800000) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x8c00000) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x9000000) = 0 (0x0) ... mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x27c00000) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x28000000) = 0 (0x0) mmap(0x0,4194304,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANON,-1,0x0) ERR#12 'Cannot allocate memory' break(0x28400000) ERR#12 'Cannot allocate memory' ======================================================================== IV.5. Solaris >= 11.1 ======================================================================== ======================================================================== IV.5.1. Minimal RLIMIT_STACK vulnerability (CVE-2017-3630) ======================================================================== On Solaris, ASLR can be enabled or disabled for each ELF binary with the SUNW_ASLR dynamic section entry (man elfedit): $ elfdump /usr/bin/rsh | egrep 'ASLR|NX' [39] SUNW_ASLR 0x2 ENABLE [40] SUNW_NXHEAP 0x2 ENABLE [41] SUNW_NXSTACK 0x2 ENABLE Without ASLR If ASLR is disabled: - a stack region of size RLIMIT_STACK is reserved in the address-space; - a 4KB stack guard-page is mapped directly below this stack region; - the runtime linker ld.so is mapped directly below this stack guard-page. $ cp /usr/bin/sleep . $ chmod u+w ./sleep $ elfedit -e 'dyn:sunw_aslr disable' ./sleep $ sh -c 'ulimit -S -s; ./sleep 3 & pmap -r ${!}' 8192 7176: ./sleep 3 ... FE7B1000 228K r-x---- /lib/ld.so.1 FE7FA000 8K rwx---- /lib/ld.so.1 FE7FC000 8K rwx---- /lib/ld.so.1 FE7FF000 8192K rw----- [ stack ] total 17148K $ sh -c 'ulimit -S -s 64; ./sleep 3 & pmap -r ${!}' 7244: ./sleep 3 ... FEFA1000 228K r-x---- /lib/ld.so.1 FEFEA000 8K rwx---- /lib/ld.so.1 FEFEC000 8K rwx---- /lib/ld.so.1 FEFEF000 64K rw----- [ stack ] total 9020K On the one hand, a local attacker can exploit this simplified stack-clash: - Step 1 (Clash) is not needed, because ld.so is naturally mapped directly below the stack (the distance between the end of ld.so's read-write segment and the start of the stack is 4KB, the stack guard-page); - Step 2 (Run) is not needed, because a local attacker can set RLIMIT_STACK to just a few kilobytes, reserve a very small stack region, and hence shorten the distance between the stack-pointer and the start of the stack (and the end of ld.so's read-write segment); - Step 3 (Jump) can be completed with a large stack-based buffer that is not fully written to; - Step 4b (Smash) can be completed by overwriting the function pointers in ld.so's read-write segment with the contents of a stack-based buffer. Such a simplified stack-clash exploit was first mentioned in Gael Delalleau's 2005 presentation (slide 30). On the other hand, a remote attacker cannot modify RLIMIT_STACK and must complete Step 2 (Run) with a recursive function that consumes the 8MB (the default RLIMIT_STACK) between the stack-pointer and the start of the stack. With ASLR If ASLR is enabled: - a stack region of size RLIMIT_STACK is reserved in the address-space; - a 4KB stack guard-page is mapped directly below this stack region; - the runtime linker ld.so is mapped below this stack guard-page, but at a random distance (within a [4KB,128MB] range) -- effectively a large, secondary stack guard-page. On the one hand, a local attacker can run the simplified "Without ASLR" stack-clash exploit until the ld.so-stack distance is minimal -- with a probability of 4KB/128MB=1/32K, the distance between the end of ld.so's read-write segment and the start of the stack is exactly 8KB: the stack guard-page plus the minimum distance between the stack guard-page and ld.so (CVE-2017-3629). On the other hand, a remote attacker must complete Step 2 (Run) with a recursive function, and: - has a good chance of exploiting this stack-clash after 32K connections (when the ld.so-stack distance is minimal) if the remote service re-execve()s (re-randomizes the ld.so-stack distance for each new connection); - cannot exploit this stack-clash if the remote service does not re-execve() (does not re-randomize the ld.so-stack distance for each new connection) unless the attacker is able to restart the service, reboot the server, or target a 32K-server farm. ======================================================================== IV.5.2. /usr/bin/rsh exploit ======================================================================== /usr/bin/rsh is SUID-root and its main() function allocates a 50KB stack-based buffer that is not written to and can be used to jump over the stack guard-page, into ld.so's read-write segment, in Step 3 of our simplified stack-clash exploit. Next, we discovered a general method for gaining eip control in Step 4b: setlocale(LC_ALL, ""), called by the main() function of /usr/bin/rsh and other SUID binaries, copies the LC_ALL environment variable to several stack-based buffers and thus smashes ld.so's read-write segment and overwrites some of ld.so's function pointers. Last, we execute our own shell-code: we return-into-binary (/usr/bin/rsh is not a PIE), to an instruction that reliably jumps into a copy of our LC_ALL environment variable in ld.so's read-write segment, which is in fact read-write-executable. For example, after we gain control of eip: - on Solaris 11.1, we return to a "pop; pop; ret" instruction, because a pointer to our shell-code is stored at an 8-byte offset from esp; - on Solaris 11.3, we return to a "call *0xc(%ebp)" instruction, because a pointer to our shell-code is stored at a 12-byte offset from ebp. Our Solaris exploit brute-forces the random ld.so-stack distance and two parameters: - the RLIMIT_STACK; - the length of the LC_ALL environment variable. ======================================================================== IV.5.3. Forced-Privilege vulnerability (CVE-2017-3631) ======================================================================== /usr/bin/rsh is SUID-root, but the shell that we obtained in Step 4b of our stack-clash exploit did not grant us full root privileges, only net_privaddr, the privilege to bind to a privileged port number. Disappointed by this result, we investigated and found: $ ggrep -r /usr/bin/rsh /etc 2>/dev/null /etc/security/exec_attr.d/core-os:Forced Privilege:solaris:cmd:RO::/usr/bin/rsh:privs=net_privaddr $ /usr/bin/rsh -h /usr/bin/rsh: illegal option -- h usage: rsh [ -PN / -PO ] [ -l login ] [ -n ] [ -k realm ] [ -a ] [ -x ] [ -f / -F ] host command rsh [ -PN / -PO ] [ -l login ] [ -k realm ] [ -a ] [ -x ] [ -f / -F ] host # cat truss.out ... 7319: execve("/usr/bin/rsh", 0xA9479C548, 0xA94792808) argc = 2 7319: *** FPRIV: P/E: net_privaddr *** ... Unfortunately, this Forced-Privilege protection is based on the pathname of SUID-root binaries, which can be execve()d through hard-links, under different pathnames (CVE-2017-3631). For example, we discovered that readable SUID-root binaries can be execve()d through hard-links in /proc: $ sleep 3 < /usr/bin/rsh & /proc/${!}/fd/0 -h [1] 7333 /proc/7333/fd/0: illegal option -- h usage: rsh [ -PN / -PO ] [ -l login ] [ -n ] [ -k realm ] [ -a ] [ -x ] [ -f / -F ] host command rsh [ -PN / -PO ] [ -l login ] [ -k realm ] [ -a ] [ -x ] [ -f / -F ] host # cat truss.out ... 7335: execve("/proc/7333/fd/0", 0xA947CA508, 0xA94792808) argc = 2 7335: *** SUID: ruid/euid/suid = 100 / 0 / 0 *** ... This vulnerability allows us to bypass the Forced-Privilege protection and obtain full root privileges with our /usr/bin/rsh exploit. ======================================================================== V. Acknowledgments ======================================================================== We thank the members of the distros list, Oracle/Solaris, Exim, Sudo, security(a)kernel.org, grsecurity/PaX, and OpenBSD.