Notes:
I set a static IP address for eth0, but the install used a dynamic on eth0,
and set the other ethernets to the static address I set up.
Since I was using a vnc install, I hit enter and got a shell, and did an
'ifconfig ethX down' for each of the unused ethernets (in my case, eth1, eth2,
and eth3). I could then connect via vnc.
More posts as I continue.
--
Lamar Owen
Chief Information Officer
Pisgah Astronomical Research Institute
1 PARI Drive
Rosman, NC 28772
http://www.pari.edu