Hi,
we're using SSSD in combination with active directory and have received
complaints from users about a corner case in our setup.
Our AD servers are only reachable from within our corporate network,
connection attempts from the outside are dropped by firewalls. This
leads to the following scenario:
- user takes machine (e.g. laptop) outside the corporate network
- user tries to authenticate (or in some cases also tries to "ls" which
causes uid/gid lookup)
- sssd will try to reach the configured servers for up to 30s
- sssd goes (back) into offline mode and uses cached credentials and
authenticates the user
This will however NOT happen if sssd gets told by the IP stack that a
connection to the target IP is not possible (e.g. "ip route add
blackhole 192.0.2.23/32" or one of the routers along the way generates
an ICMP unreachable). In such cases sssd will go immediately into
offline mode and use cached credentials.
I'm aware that this is over all sensible behaviour, but what I would
hope to fine tune is how sssd stays in offline mode. Currently it seems
like it will leave offline mode when it tries to reconnect (hardcoded
30s?). That leads to a flip flop scenario where it seems to be 30s
offline and 30s "online/connecting" and users have a fairly high chance
to hit a time during which their authentication will seemingly stall.
So my question is:
Is there a better way to deal with this in the sssd context?
If not we'll probably have to implement separate connection checking and
inject and remove blackhole routes accordingly. Not the nicest of
workarounds in my book.
Thanks, cheers
Thomas
PS: We're using sssd on many distributions, but our main distro at the
moment is ubuntu 12.04 with sssd 1.8.6 and we'll be rolling out 14.04 in
addition, which has sssd 1.11.3.
Show replies by date