Tagging PPD package with DeviceID.
by George Liu
Tim,
Do you think you can loosen up the requirement for 1284DeviceID string a bit, so PackageKit could be used for a wider array of devices?
Although Port Monitor MIB has been 4-5 years old, it has not been adopted by all printer manufactures.
Most Ricoh devices do not support it. Combined with the seven brands we have, Ricoh has 23.1% copier market share in the US in 2009. http://www.ricoh-usa.com/about/press/releases.asp?id=620 I believe Ricoh has similar market share in Europe and Japan as well.
I believe packageKit can still work for devices without port monitor mib support.
CUPS still can use hrDeviceDesc mib to get manufacture name and model name. ("make-and-model" ipp attribute.).
With that attribute, one can simply construct 1284deviceID as "MFG:make;MDL:model".
If def "examine_file (self, path):" can put in this extra bit of logic (if no 1284DeviceID, construct one using Manufacturer and ModelName", it will be able to tag the PPD package correctly. (Alternatively, if openprinting.org is to create the PPD package, Till could deploy the similar logic)
Then, the next question become how do s-c-p matches a device to a PPD file. Can you elaborate on this session?
-----------------------------------------------------------------------
If it's a network printer, we use the Device ID that CUPS gives us: to choose a network printer, we ask CUPS for a list of devices from schemes 'dnssd' and 'snmp', and each of those backends reports Device IDs for the network devices they discover, when possible.
-----------------------------------------------------------------------
George
-----Original Message-----
From: Tim Waugh [mailto:twaugh@redhat.com]
Sent: Wednesday, April 28, 2010 9:19 AM
To: George Liu
Cc: Till Kamppeter; Bin Li
Subject: RE: [Printing-summit] OpenPrinting Summit 2010 - Assigned the Sessions to Hours
Hi George,
You might like to subscribe to the new system-config-printer-devel mailing list:
https://fedorahosted.org/mailman/listinfo/system-config-printer-devel
That's the sort of thing we can discuss there.
On Tue, 2010-04-27 at 13:16 -0700, George Liu wrote:
> Ricoh liked the idea you had for using PackageKit to download/update
> driver very much. We would like to update our PPD file (currently we
> don't put 1284DeviceID in them), and test out the Ricoh PPD package
> with System-Config-Printer (scp).
>
> Can you guide me through the process? I have a couple questions that I
> want to clarify.
>
> 1. How exactly does scp aquires 1284DeviceID? Which CUPS API does it
> use?
Here is the full cycle:
First, you add the 1284DeviceID attributes to your PPD files.
Then you get those PPD files into an RPM source package. One way to do that would be to add/update them in foomatic-db. I periodically pull a new foomatic-db snapshot from openprinting.org into the Fedora 'foomatic-db' package.
Next, the binary RPM is built on Fedora 13. At the very end of this process, Fedora 13's version of rpm will run a special 'provides'
script, /usr/lib/rpm/postscriptdriver.prov, will get run on each of the PPD-providing files to be packaged up in the RPM. You can see that script here:
http://cvs.fedoraproject.org/viewvc/devel/rpm/rpm-4.8.0-psdriver-deps.pat...
(as well as the changes we made to rpm to get it to identify which files provide PPDs)
The provides script is written in Python. Here's the bit that extracts the IEEE 1284 Device ID from a simple PPD file:
class PPDDriver(Driver):
...
def examine_file (self, path):
try:
ppd = cups.PPD (path)
except RuntimeError, e:
# Not a PPD file. Perhaps it's a drv file.
drv = DrvDriver (path)
self.ids += drv.list ()
return
attr = ppd.findAttr ('1284DeviceID')
while attr:
self.ids += attr.value
attr = ppd.findNextAttr ('1284DeviceID')
i.e. it uses the CUPS PPD API from libcups (via pycups).
That provides script tells rpm what tags to attach to the binary RPM package.
When that binary RPM is made available as an update to Fedora, it will be in a yum repository. The repository contains some comparatively small files containing all of the 'Provides:' tags from the packages in the repository, along with which package provides each. In this way, PackageKit running on a Fedora installation is able to download this file, examine it, and decide which packages it would need to download in order to satisfy a given 'Requires:' requirement.
So, the next thing is that a user comes along with their printer, and they plug it into their Fedora installation (or set up a network queue for it, if it's a network printer).
If it's a USB printer, the system-config-printer-udev program collects the IEEE 1284 Device ID from the kernel, asks CUPS for a list of local devices (with IDs) and tries to match the printer against one of the available CUPS devices.
If it's a network printer, we use the Device ID that CUPS gives us: to choose a network printer, we ask CUPS for a list of devices from schemes 'dnssd' and 'snmp', and each of those backends reports Device IDs for the network devices they discover, when possible.
When it has got a Device ID, system-config-printer asks PackageKit to install all drivers providing it. (In fact, it asks the PackageKit session daemon to do it, which in turn asks the PackageKit system
daemon.)
> 2. How does scp handles the case for printers without Port Monotor MIB
> support?
If a network printer does not report its IEEE 1284 Device ID in a way that the CUPS backends can collect, system-config-printer won't get a Device ID for it and so won't be able to ask PackageKit to install any drivers.
> 3. I got scp source from git fedora repository. Which file should I
> look at?
The implementation of the automatic printer driver download feature spans several packages actually, so for testing it out, by *far* the easiest way to do it is to download and install Fedora 13 Beta and set up a queue for the printer.
If you're interested in the implementation, it takes quite a bit of
following:
rpm (see the link above)
system-config-printer:
ppdsloader.py contains a class that fetches a list of PPDs from CUPS given an IEEE 1284 Device ID. First it asks both Jockey and PackageKit if they'd like to install any relevant drivers. This is used in system-config-printer.py when a queue is set up.
installdriver.py contains a D-Bus system service that runs in the user's session, and simply forwards the udev hook's D-Bus request on to the PackageKit session daemon. That way, the user gets to accept/decline package installation. See udev/udev-add-printer for the client part of it.
gnome-packagekit:
src/gpk-dbus-task.c (gpk_dbus_task_install_printer_drivers): this handles the actual PackageKit transactions and user interactions
PackageKit:
new enum type for postscriptdriver, as well as special handling in the yum backend
> 4. What are the stesp needed to setup development environment for scp?
> When I run "make" under pycups directory, it tells me "unable to open
> /usr/lib/python2.6/config/Makefile"
I haven't had any other reports of pycups failing to build. What system are you trying that on?
The development environment is quite simple. You don't even have to install anything if you just want to run the main application:
Check out pycups and system-config-printer
# If you don't have pycups installed already:
cd pycups
make
ln -sf ../pycups/cups.so ../system-config-printer cd ..
cd system-config-printer
make run-applet # for the applet
make run # for the main app
But as I said, if you're wanting to try out the automatic printer driver installation you need more than just the system-config-printer changes.
Really you need Fedora 13 Beta.
Tim.
*/
13 years, 6 months
Suggestions For User Interface?
by Quintin van Rooyen
Hey List.
I am new to this list, but a FLOSS fanatic and wondered if this would be the
place that I could submit a UI suggestion for the app.
If not, could any of you direct me in the right forum/mailing list?
Regards!
--
Quintin van Rooyen
quintin.vanrooyen(a)gmail.com
The New SA Geek!
http://g33q.co.za
13 years, 8 months
--without-udev-rules has no effect since 1.2.3
by Maciej Mrozowski
Hi
Since scp-1.2.3, --without-udev-rules has no effect any more, to be precise
the effect is udev rules are installed by default (default is claimed to be
"no") and cannot be disabled without changing .am files (UDEV_RULES used there
is always true apparently).
--
regards
MM
13 years, 10 months
pycups-1.9.51 is released
by Tim Waugh
I've released version 1.9.51 of the libcups Python bindings. The only
significant change is a fix for a stack overflow in
Connection.deletePrinterOptionDefault.
Tim.
*/
13 years, 10 months
system-config-printer-1.2.3 is released
by Tim Waugh
I've just released system-config-printer-1.2.3. It has several bug
fixes and some small UI improvements.
In order to satisfy 'make distcheck' I had to change the default udev
install directories. To override them, use something like this:
make install \
udevrulesdir=/lib/udev/rules.dir \
udevhelperdir=/lib/udev
This release also requires glib2-devel now due to the addition of
Bluetooth support in the udev helper program.
Tim.
*/
13 years, 10 months
