Re: Problems with rndc and named, bind-9.2.3-13
by Brian Bober
I figured it out. my /var/named/chroot/etc/rndc.key was empty and I needed to
copy /etc/rndc.key to replace it (installed by the caching-nameserver package)
Command:
(/var/named/chroot/etc)> cp /etc/rndc.key .
I hope that helps. If you have bind-chroot package installed, then the rndc.key
named uses isn't in the /etc/rndc.key but is in /var/named/chroot/etc/rndc.key
Thanks to anduin and DA-MAN on irc.redhat.com #fedora for assistance and many
others.
:-)
19 years, 11 months
Re: Problems with rndc and named, bind-9.2.3-13
by Brian Bober
(/var/named/chroot/etc)> telnet localhost 953
Trying 127.0.0.1...
telnet: connect to address 127.0.0.1: Connection refused
I think this is the issue... But port 953 is open on my firewall, it doesn't
make sense.
"Charlie Don" wrote:
Hello all,
I am having the traditional rndc problem. I have googled it and spent some time
messing with rndc.conf, rndc.key and named.conf. I have used the rndc-keygen
etc etc.
<snip>
What shall I do?
Thanks,
C.
19 years, 11 months
Rawhide, Virtual PC (Mac OSX) don't get along?
by G.Wolfe Woodbury
I'm trying to install rawhide on a Virtual PC under OSX 10.2.5(?) and am
having significant problems with the networking. An FC1 VPC has no
problems with using the network, but the boot.iso from rawhide won't use
the emulated tulip card properly. It fails DHCP and NAMED and HTTP.
Is anyone using this combination with rawhide, and how did you get it
going?
--
G.Wolfe Woodbury `- -'
U
The Line Eater is a boojum!
19 years, 11 months
some issues with nautilus MIME associations and thumbnails
by Siddharth Toshniwal
Hi all,
Have been facing a few issues with nautilus for the last
couple of days. I've upgraded my system (which was originally
RedHat 9) using up2date using the rawhide channel, so I
guess I may have some packages which are not working well
with each other. I don't know exactly which upgrade has
resulted in these problems, so I'm posting for help if
anyone has solved similar issues. The details are as follows:
* Nautilus does not show thumbnails for some of the images
within one directory while for others (which have the same
extension) it does so properly. Opening the images with
either eog or gimp does not report any errors.
* I seem to have some problem with *all* my MIME associations
(including the ones that are configured by default usually)
Even if I associate them manually (.jpg to eog, .doc to
star-office and so on), nautilus does not open the same
when I double click in the file window. I have to open
any documents using the terminal only :(
The file association is shown correctly the next time I
double click the file and click on 'Associate', but
somehow the association does not work on its own.
The packages that I have installed are:
nautilus-media-0.8.0-2
nautilus-2.6.0-5
shared-mime-info-0.14-1
gnome-mime-data-2.4.1-4
gnome-vfs2-2.6.0-8
I read up the following article but it is not clear to
me yet as to what I've done incorrectly:
http://www.amitysolutions.com.au/documents/GnomeFiles-technote.pdf
thanks,
Siddharth.
19 years, 11 months
PCMCIA
by sumonish1@optusnet.com.au
Problem with PCMCIA.
Only way to get it to work is to do modprobe Yenta_socket then Service pcmcia
restart then service network restart
thanks
Sumonish
19 years, 11 months
libswigpy
by Paul F. Johnson
Hi,
Just attempted to do a yum update from the rawhide servers and it's come
back with libswigpy being missing.
What is supposed to provide it or is it more a case of it not having
been placed on rawhide yet?
TTFN
Paul
--
"Your lives are in the hands of men no smarter than you or I, many of
them incompetent boobs. I know this because I worked alongside them,
gone bowling with them, watched them pass me over for promotions time
and again. And I say ... This stinks!" - Homer Simpson
19 years, 11 months
gdb looks for debug versions of libraries
by Rob Shewan
I am attempting to use KDevelop under FC2T3. I have googled this to
death, examined release notes and so on.
I did find a Redhat note that warns about the lack of debug libraries
but I guess I'm in denial regarding the requirement to get the source
for each of the libraries and build debug versions.
gdb on the run command attempts to locate libraries built with debug
information (see attached). gdb executed from the command line produces
the error output and the human (me) ignores it and the debug session
continues. KDbg ignores the errors as well but, KDevelop does not.
KDevelop stops the debug session in its tracks (at least this is what I
can understand from the interface).
Are libraries available in the FC2* distribution that contain debug
information?
Rob Shewan
Advanced Acoustic Concepts
stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory)
open("/usr/lib/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/.debug/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/debug//usr/lib/libstdc++.so.5.0.5.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/tls/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/tls/.debug/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/debug//lib/tls/libm-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/.debug/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/debug//lib/libgcc_s-3.3.3-20040413.so.1.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/tls/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/tls/.debug/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/debug//lib/tls/libc-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/lib/.debug/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
open("/usr/lib/debug//lib/ld-2.3.3.so.debug", O_RDONLY) = -1 ENOENT (No such file or directory)
stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory)
stat64("", 0xfeef3c2c) = -1 ENOENT (No such file or directory)
19 years, 11 months
FC2 - RH9 dual boot problem
by Jim Bevier
I have a system with FC2 on /dev/hda6 (/) and /dev/hda1 (/boot). I also have a
RedHat 9 system installed on /dev/hda8 (/) and I dual boot the system. The disk
also has Win2K and WinXP. The FC2 is a fresh install over a FC2 Test 3 system
as I used this system for testing of the FC2 test releases. Somewhere along the
line during the FC2 testing, the RedHat system can no longer be booted. I get
the following messages:
...
...
XT3-fs: mounted filesystem with ordered data mode.
attempt to access beyond end of device
03:08: rw=0, want 1219858868, limit=36893241
attempt to access beyond end of device
03:08: rw=0, want 1219858868, limit=36893241
Kernel panic: No Init found.
I think this started after I did a "fixfile" on a FC2T2 system and had the
RedHat partition mounted and it was "fixed" too. I am really not sure when the
partition became unbootable. The limit value in the message is the size of the
partition as reported by fdisk. I also get alignment errors reported from
sfdisk. The same errors that are reported with other users who have dual boot
problems. I even tried the fix suggested for the dual boot problem, but it had
no affect. I do not have a problem with either windows systems, it is just with
RedHat 9. The system is a Tyan 2460 with two Athlon 1200 cpus and 120 GB disk.
Any idea of now I can get this system bootable? I can read/write it just fine
from FC2. It just won't boot.
Jim
19 years, 11 months
ITE8212 RAID Controller - unable to allocate IRQ
by Hannes Mayer
[cross-post! sorry, but the fedora-list has so many messages, it's almost
impossible to follow any thread]
Hi all!
I just recompiled kernel 2.6.6-1.391 (Arjan) with the ITE8212 driver as
module.
Everything went as expected and the kernel installed fine.
But when I modprobe:
# modprobe -f iteraid
FATAL: Error inserting iteraid
(/lib/modules/2.6.6-1.391custom/kernel/drivers/scsi/iteraid.ko): No such
device
The kernel says this:
# dmesg
[...]
Found Controller: IT8212 UDMA/ATA133 RAID Controller
iteraid_init: unable to allocate IRQ for IT8212 UDMA/ATA133 RAID Controller
[...]
What can be done to set another IRQ ?
How can I check if there are any IRQ conflicts ? (all devices seem to
perform fine)
Thanks a lot,
Hannes.
19 years, 11 months
Highlighting in Abiword doesnot work ......
by Poonchezhian P.
Hi,
When I try to highlight any text in Abiword, it doesnt work. I'm using KDE. It works with GNOME environment. This
issue was there in FC1 too.
Is there any way to sort it out ???
--
Poonchezhian P.
19 years, 11 months