Intel i810 graphics
by Mark Guzzo
Hello all,
I've just updated my FC3-T1 and now in X the screen/apps do not get
refreshed unless I mouse over the area. I tried different resolutions,
but the problem is still there.
For now I changed the driver in xorg.confg from "i810" to "vesa" and
everything works great even if it's at 800x600 :-(
[guzmar@LORDLINUX ~]$ rpm -q xorg-x11
xorg-x11-6.7.99.903-1
Should I bugzilla this ?
Mark
19 years, 7 months
C++ compiler problems with FC2
by Steve Friedman
I've had a strange problem when trying to compile a C++ program.
On FC2, when using the standard C++ compiler (gcc 3.3.3), the first line
of the program (#include <iostream>) caused a raft of errors regarding the
file cmath. I was then pointed to try gcc 2.96, but this didn't work for
other reasons.
However, on FC1 (with gcc3.3.1), the program compiled cleanly (and ran on
FC2).
What gives?
Steve Friedman
19 years, 7 months
More on my cups saga!
by Paul F. Johnson
Hi,
For those who have been following the saga of getting printing to work
again on my FC3t1 box...
Doing a clean install from source didn't solve any of my problems
Moving down to the 526 kernel sort of sorted the problem (see below)
Disabling (totally) SELinux under the 533 and 532 kernels did nothing
However,
I did notice that none of the USB drivers had been loaded
su
/sbin/modprobe usb-uhci
/sbin/modprobe usb-ohci
/sbin/modprobe lpusb
Now, the final one gave the same insane amount of disc thrashing as
editting the properties in s-c-p.
(The 526 kernel worked, but selinux was getting in the way [not allowing
anything to happen]. Disabling selinux didn't do very much either).
Question now is this : can the problem be kernel and/or selinux related?
TTFN
Paul
--
"Our enemies are innovative and resourceful - and so are we,"
"They never stop thinking about new ways to harm our country and our
people - and neither do we." - George W. Bush, Aug 2004
19 years, 7 months
Re: C++ compiler problems with FC2
by Steve Friedman
Unfortunately, my spam filter killed the various replies to my message, so
this is a new thread (I've eliminated *that* rule)...
Yes, it was dumb of me to not include the code that I was trying to
compile -- it was from www.opengc.org. (As an aside, I had the same test
results as Rob Cochran.)
The file that I was trying to compile begins:
#include <FL/Fl.H> // this is from fltk-devel
#include "ogcAppObject.h"
And, ogcAppObject.h begins:
#include <iostream>
These are the error messages:
> make > err.out 2>&1
cmake.depends is up-to-date
/home/steve/opengc55-fgfs094/opengc/Source: building default_target
Building object file /home/steve/opengc55-fgfs094/opengc/Source/Base/main.o...
In file included from /usr/include/c++/3.3.3/bits/char_traits.h:45,
from /usr/include/c++/3.3.3/ios:46,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/cstring:79: error: `memcpy' not declared
/usr/include/c++/3.3.3/cstring:80: error: `memmove' not declared
/usr/include/c++/3.3.3/cstring:81: error: `strcpy' not declared
/usr/include/c++/3.3.3/cstring:82: error: `strncpy' not declared
/usr/include/c++/3.3.3/cstring:83: error: `strcat' not declared
/usr/include/c++/3.3.3/cstring:84: error: `strncat' not declared
/usr/include/c++/3.3.3/cstring:85: error: `memcmp' not declared
/usr/include/c++/3.3.3/cstring:86: error: `strcmp' not declared
/usr/include/c++/3.3.3/cstring:87: error: `strcoll' not declared
/usr/include/c++/3.3.3/cstring:88: error: `strncmp' not declared
/usr/include/c++/3.3.3/cstring:89: error: `strxfrm' not declared
/usr/include/c++/3.3.3/cstring:90: error: `strcspn' not declared
/usr/include/c++/3.3.3/cstring:91: error: `strspn' not declared
/usr/include/c++/3.3.3/cstring:92: error: `strtok' not declared
/usr/include/c++/3.3.3/cstring:93: error: `memset' not declared
/usr/include/c++/3.3.3/cstring:94: error: `strerror' not declared
/usr/include/c++/3.3.3/cstring:95: error: `strlen' not declared
/usr/include/c++/3.3.3/cstring:97: error: `memchr' not declared
/usr/include/c++/3.3.3/cstring: In function `void* std::memchr(void*, int,
unsigned int)':
/usr/include/c++/3.3.3/cstring:101: error: invalid conversion from `const void*
' to `void*'
/usr/include/c++/3.3.3/cstring: At global scope:
/usr/include/c++/3.3.3/cstring:103: error: `strchr' not declared
/usr/include/c++/3.3.3/cstring:109: error: `strpbrk' not declared
/usr/include/c++/3.3.3/cstring:115: error: `strrchr' not declared
/usr/include/c++/3.3.3/cstring:121: error: `strstr' not declared
In file included from /usr/include/c++/3.3.3/ios:46,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
int std::char_traits<char>::compare(const char*, const char*, unsigned int)
':
/usr/include/c++/3.3.3/bits/char_traits.h:139: error: `memcmp' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/char_traits.h:139: error: (Each undeclared
identifier is reported only once for each function it appears in.)
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
size_t std::char_traits<char>::length(const char*)':
/usr/include/c++/3.3.3/bits/char_traits.h:143: error: `strlen' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
const char* std::char_traits<char>::find(const char*, unsigned int, const
char&)':
/usr/include/c++/3.3.3/bits/char_traits.h:147: error: invalid conversion from `
const void*' to `void*'
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
char* std::char_traits<char>::move(char*, const char*, unsigned int)':
/usr/include/c++/3.3.3/bits/char_traits.h:151: error: `memmove' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
char* std::char_traits<char>::copy(char*, const char*, unsigned int)':
/usr/include/c++/3.3.3/bits/char_traits.h:155: error: `memcpy' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/char_traits.h: In static member function `static
char* std::char_traits<char>::assign(char*, unsigned int, char)':
/usr/include/c++/3.3.3/bits/char_traits.h:159: error: `memset' undeclared
(first use this function)
In file included from /usr/include/c++/3.3.3/memory:54,
from /usr/include/c++/3.3.3/string:48,
from /usr/include/c++/3.3.3/bits/locale_classes.h:47,
from /usr/include/c++/3.3.3/bits/ios_base.h:47,
from /usr/include/c++/3.3.3/ios:49,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/bits/stl_algobase.h: In function `void
std::fill(unsigned char*, unsigned char*, const unsigned char&)':
/usr/include/c++/3.3.3/bits/stl_algobase.h:549: error: `memset' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/stl_algobase.h: In function `void std::fill(signed
char*, signed char*, const signed char&)':
/usr/include/c++/3.3.3/bits/stl_algobase.h:556: error: `memset' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/stl_algobase.h: In function `void std::fill(char*,
char*, const char&)':
/usr/include/c++/3.3.3/bits/stl_algobase.h:563: error: `memset' undeclared
(first use this function)
/usr/include/c++/3.3.3/bits/stl_algobase.h: In function `bool
std::lexicographical_compare(const unsigned char*, const unsigned char*,
const unsigned char*, const unsigned char*)':
/usr/include/c++/3.3.3/bits/stl_algobase.h:793: error: `memcmp' undeclared
(first use this function)
In file included from /usr/include/c++/3.3.3/memory:58,
from /usr/include/c++/3.3.3/string:48,
from /usr/include/c++/3.3.3/bits/locale_classes.h:47,
from /usr/include/c++/3.3.3/bits/ios_base.h:47,
from /usr/include/c++/3.3.3/ios:49,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/bits/stl_uninitialized.h: In function `char*
std::uninitialized_copy(const char*, const char*, char*)':
/usr/include/c++/3.3.3/bits/stl_uninitialized.h:118: error: `memmove'
undeclared (first use this function)
/usr/include/c++/3.3.3/bits/stl_uninitialized.h: In function `wchar_t*
std::uninitialized_copy(const wchar_t*, const wchar_t*, wchar_t*)':
/usr/include/c++/3.3.3/bits/stl_uninitialized.h:126: error: `memmove'
undeclared (first use this function)
In file included from /usr/include/c++/3.3.3/bits/ios_base.h:47,
from /usr/include/c++/3.3.3/ios:49,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/bits/locale_classes.h: In member function `bool
std::locale::_Impl::_M_check_same_name()':
/usr/include/c++/3.3.3/bits/locale_classes.h:260: error: `strcmp' undeclared
(first use this function)
In file included from /usr/include/c++/3.3.3/bits/codecvt.h:334,
from /usr/include/c++/3.3.3/bits/locale_facets.h:528,
from /usr/include/c++/3.3.3/bits/basic_ios.h:44,
from /usr/include/c++/3.3.3/ios:51,
from /usr/include/c++/3.3.3/ostream:45,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h: In
constructor `std::__enc_traits::__enc_traits()':
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h:78: error: `
memset' undeclared (first use this function)
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h: In
constructor `std::__enc_traits::__enc_traits(const char*, const char*, int,
int)':
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h:86: error: `
strncpy' undeclared (first use this function)
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h: In
copy constructor `std::__enc_traits::__enc_traits(const std::__enc_traits&)
':
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h:97: error: `
strncpy' undeclared (first use this function)
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h: In
member function `std::__enc_traits& std::__enc_traits::operator=(const
std::__enc_traits&)':
/usr/include/c++/3.3.3/i386-redhat-linux/bits/codecvt_specializations.h:107: error: `
strncpy' undeclared (first use this function)
In file included from /usr/include/c++/3.3.3/bits/locale_facets.tcc:41,
from /usr/include/c++/3.3.3/locale:47,
from /usr/include/c++/3.3.3/bits/ostream.tcc:37,
from /usr/include/c++/3.3.3/ostream:535,
from /usr/include/c++/3.3.3/iostream:45,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/ogcAppObject.h:54,
from /home/steve/opengc55-fgfs094/opengc/Source/Base/main.cpp:45:
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:107: error: `acosf' not declared
/usr/include/c++/3.3.3/cmath:110: error: `asinf' not declared
/usr/include/c++/3.3.3/cmath:113: error: `atanf' not declared
/usr/include/c++/3.3.3/cmath:116: error: `atan2f' not declared
/usr/include/c++/3.3.3/cmath:119: error: `ceilf' not declared
/usr/include/c++/3.3.3/cmath:122: error: `coshf' not declared
/usr/include/c++/3.3.3/cmath:125: error: `expf' not declared
/usr/include/c++/3.3.3/cmath:128: error: `floorf' not declared
/usr/include/c++/3.3.3/cmath:131: error: `fmodf' not declared
/usr/include/c++/3.3.3/cmath:134: error: `frexpf' not declared
/usr/include/c++/3.3.3/cmath:137: error: `ldexpf' not declared
/usr/include/c++/3.3.3/cmath:140: error: `logf' not declared
/usr/include/c++/3.3.3/cmath:143: error: `log10f' not declared
/usr/include/c++/3.3.3/cmath:146: error: `modff' not declared
/usr/include/c++/3.3.3/cmath:149: error: `powf' not declared
/usr/include/c++/3.3.3/cmath:152: error: `sinhf' not declared
/usr/include/c++/3.3.3/cmath:155: error: `tanf' not declared
/usr/include/c++/3.3.3/cmath:158: error: `tanhf' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::acos(float)':
/usr/include/c++/3.3.3/cmath:184: error: `acosf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:190: error: `acos' not declared
/usr/include/c++/3.3.3/cmath: In function `long double std::acos(long double)':
/usr/include/c++/3.3.3/cmath:194: error: `::acosl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:200: error: `asin' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::asin(float)':
/usr/include/c++/3.3.3/cmath:204: error: `asinf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::asin(long double)':
/usr/include/c++/3.3.3/cmath:212: error: `::asinl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:218: error: `atan' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::atan(float)':
/usr/include/c++/3.3.3/cmath:222: error: `atanf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::atan(long double)':
/usr/include/c++/3.3.3/cmath:230: error: `::atanl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:236: error: `atan2' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::atan2(float, float)':
/usr/include/c++/3.3.3/cmath:240: error: `atan2f' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::atan2(long double,
long double)':
/usr/include/c++/3.3.3/cmath:249: error: `::atan2l' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:256: error: `ceil' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::ceil(float)':
/usr/include/c++/3.3.3/cmath:260: error: `ceilf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::ceil(long double)':
/usr/include/c++/3.3.3/cmath:268: error: `::ceill' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:274: error: `cos' not declared
/usr/include/c++/3.3.3/cmath:284: error: `cosh' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::cosh(float)':
/usr/include/c++/3.3.3/cmath:288: error: `coshf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::cosh(long double)':
/usr/include/c++/3.3.3/cmath:296: error: `::coshl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:302: error: `exp' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::exp(float)':
/usr/include/c++/3.3.3/cmath:306: error: `expf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::exp(long double)':
/usr/include/c++/3.3.3/cmath:314: error: `::expl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:320: error: `fabs' not declared
/usr/include/c++/3.3.3/cmath:330: error: `floor' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::floor(float)':
/usr/include/c++/3.3.3/cmath:334: error: `floorf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::floor(long double)
':
/usr/include/c++/3.3.3/cmath:342: error: `::floorl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:348: error: `fmod' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::fmod(float, float)':
/usr/include/c++/3.3.3/cmath:352: error: `fmodf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::fmod(long double,
long double)':
/usr/include/c++/3.3.3/cmath:361: error: `::fmodl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:368: error: `frexp' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::frexp(float, int*)':
/usr/include/c++/3.3.3/cmath:372: error: `frexpf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::frexp(long double,
int*)':
/usr/include/c++/3.3.3/cmath:380: error: `::frexpl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:387: error: `ldexp' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::ldexp(float, int)':
/usr/include/c++/3.3.3/cmath:391: error: `ldexpf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::ldexp(long double,
int)':
/usr/include/c++/3.3.3/cmath:400: error: `::ldexpl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:407: error: `log' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::log(float)':
/usr/include/c++/3.3.3/cmath:411: error: `logf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::log(long double)':
/usr/include/c++/3.3.3/cmath:419: error: `::logl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:425: error: `log10' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::log10(float)':
/usr/include/c++/3.3.3/cmath:429: error: `log10f' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::log10(long double)
':
/usr/include/c++/3.3.3/cmath:437: error: `::log10l' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:443: error: `modf' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::modf(float, float*)':
/usr/include/c++/3.3.3/cmath:447: error: `modff' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::modf(long double,
long double*)':
/usr/include/c++/3.3.3/cmath:461: error: `::modfl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:482: error: `pow' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::pow(float, float)':
/usr/include/c++/3.3.3/cmath:486: error: `powf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::pow(long double,
long double)':
/usr/include/c++/3.3.3/cmath:495: error: `::powl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:514: error: `sin' not declared
/usr/include/c++/3.3.3/cmath:524: error: `sinh' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::sinh(float)':
/usr/include/c++/3.3.3/cmath:528: error: `sinhf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::sinh(long double)':
/usr/include/c++/3.3.3/cmath:536: error: `::sinhl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:542: error: `sqrt' not declared
/usr/include/c++/3.3.3/cmath:552: error: `tan' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::tan(float)':
/usr/include/c++/3.3.3/cmath:556: error: `tanf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::tan(long double)':
/usr/include/c++/3.3.3/cmath:564: error: `::tanl' undeclared (first use here)
/usr/include/c++/3.3.3/cmath: At global scope:
/usr/include/c++/3.3.3/cmath:570: error: `tanh' not declared
/usr/include/c++/3.3.3/cmath: In function `float std::tanh(float)':
/usr/include/c++/3.3.3/cmath:574: error: `tanhf' undeclared in namespace `
__gnu_cxx::__c99_binding'
/usr/include/c++/3.3.3/cmath: In function `long double std::tanh(long double)':
/usr/include/c++/3.3.3/cmath:582: error: `::tanhl' undeclared (first use here)
make[3]: *** [/home/steve/opengc55-fgfs094/opengc/Source/Base/main.o] Error 1
make[2]: *** [default_target] Error 2
make[1]: *** [default_target_Source] Error 2
make: *** [default_target] Error 2
Steve
19 years, 7 months
Evolution version
by David R. Fischer
quick question.
I see that evolution 1.5.2 is in test 2.90 but I see that evolution 1.5.3 plus
all the connectors are in development. My question is evolution 1.5.3 and
connectors going to make it into Fedora core 3??
--
-he who controls the present controls the past,
-he who controls the past controls the future. -- George Orwell, 1984.
19 years, 7 months
CUPS still giving me problems
by Paul F. Johnson
Hi,
Despite a weekend of trying to get cups to respond, I'm faced with
either having to install from source or find a previous version.
The error logs indicate the backend is dead rather than anything else.
s-c-printer still causes a fall over and the desktop to restart itself
(nautilus is killed, gnome-panel is killed and so are all applications
running at the time).
Trying to restart the cups server kills the machine!
Is there another release candidate due soon or should I install from
source with all of the fun and games that brings?
TTFN
Paul
--
"If I face my God tomorrow, I can tell Him I am innocent.
I've never harmed anyone. I have cheated no one.
I have deceived no one. I have hurt no one.
Except myself. And that He will forgive me." - Hans Holzel
19 years, 7 months
USB System Partially Broken with 533 Kernel?
by Thomas J. Baker
I noticed after yesterdays kernel update that I could no longer get
pictures off my camera. When I tried lsub, I got this:
katratzi> lsusb
Unknown line at line 4969
Unknown line at line 4970
Unknown line at line 4971
Unknown line at line 4972
Unknown line at line 4973
Unknown line at line 4974
Unknown line at line 4975
Unknown line at line 4976
Unknown line at line 4977
Unknown line at line 4978
Unknown line at line 4979
Unknown line at line 4980
Unknown line at line 4981
Unknown line at line 4982
Unknown line at line 4983
Unknown line at line 4984
Unknown line at line 4985
Unknown line at line 4986
Unknown line at line 4987
Unknown line at line 4988
Unknown line at line 4989
Unknown line at line 4990
Unknown line at line 4991
Unknown line at line 4992
Unknown line at line 4993
Unknown line at line 4994
Unknown line at line 4995
Unknown line at line 4996
Unknown line at line 4997
Unknown line at line 4998
Unknown line at line 4999
Unknown line at line 5000
Unknown line at line 5001
Unknown line at line 5002
Unknown line at line 5003
Unknown line at line 5004
katratzi>
My camera is an EOS-10d and it doesn't use usb-storage but a dedicated
libgphoto driver. My usb mouse and keyboard still work. A few kernels
ago, I had to start retrieving my pictures as root because a normal user
no longer worked due to permissions. I chalked that up to udev
development. It now doesn't work at all. gphoto complains about not
being able to find the device.
Thanks,
tjb
--
=======================================================================
| Thomas Baker email: tjb(a)unh.edu |
| Systems Programmer |
| Research Computing Center voice: (603) 862-4490 |
| University of New Hampshire fax: (603) 862-1761 |
| 332 Morse Hall |
| Durham, NH 03824 USA http://wintermute.sr.unh.edu/~tjb |
=======================================================================
19 years, 7 months
USB memory stick with latest 2.6.8-1.533smp kernel
by Nave, Ronald
I upgraded to the 2.6.8.1-533smp kernel on FT3 - test1 and my usb memory
stick stopped working ( /dev/sda1 not valid )
When I rebooted back to version 2.6.8-1.526smp , it started to work again.
19 years, 7 months
GNOME Terminal Issue?
by M Galvin
When logging into a remote box via ssh from in a GNOME Terminal (2.7.3) I get the following error when running vi on the remote box.
my actions include...
Open up a new GNOME Terminal
run: ssh -l me <remotebox>
#remotebox: vi <file>
<<snip>>
E558: Terminal entry not found in terminfo
'gnome' not known. Available builtin terminals are:
builtin_gui
builtin_riscos
builtin_amiga
builtin_beos-ansi
builtin_ansi
builtin_pcansi
builtin_win32
builtin_vt320
builtin_vt52
builtin_xterm
builtin_iris-ansi
builtin_debug
builtin_dumb
defaulting to 'ansi'
<<snip>>
when this happens, vi does not function correctly either.
vi on the remote box works just fine when logging in from my win box with SecureCRT. It seems as it may be an issue with GNOME Terminal 2.7.3, but i am not sure. Has anyone else run into this issue? The remote box is a debian box.
Any help is appreciated.
Thanks,
Matt
19 years, 7 months
