NVIDIA Question
by David St.Clair
This may be a dumb question, but why can't Redhat distribute NVIDIA binary
drivers?
In NVIDIA's licence (http://www.nvidia.com/object/nv_swlicense.html) it
says:
"2.1.2 Linux Exception. Notwithstanding the foregoing terms of Section
2.1.1, SOFTWARE designed exclusively for use on the Linux operating system
may be
copied and redistributed, provided that the binary files thereof are not
modified in any
way (except for unzipping of compressed files)."
So, what's keeping RedHat from putting the drivers in the distribution? If
it's a GPL
thing, would it be easy to just download it during installation or at
least give the option to the user?
Thanks,
--
David St.Clair
dstclair(a)cs.wcu.edu
1 year, 8 months
Mouse goes crazy
by Jonathan Villa
Ok, I have had Yarrow working well for a while now, but yesterday I
started experiencing some odd issues with my mouse. All of a sudden it
stops working correctly. The only thing that seems to fix is to kill X
and run mouse-test, then restart.
Any ideas?
Also, I have FC 1 running on a desktop which is hooked up to a KVM
switch. Whenever I go to another PC, and return, the same thing
happens, the mouse goes crazy.
???
1 year, 8 months
Mouse Wheel gone
by Christian Menzel
Since the latest xorg-X11 upgrade I receive the already mentioned XKB
error and the mouse wheel is not working anymore.
Has anybody seen this behavior?
Regards
Chris
7 years, 10 months
Re: NFS failure
by Fulko.Hew＠sita.aero
Damian Menscher <menscher(a)uiuc.edu>@redhat.com on 04/07/2004 04:57:13 PM
wrote:
> On Wed, 7 Apr 2004, Jeff Elkins wrote:
>
> > I'm getting failure messages on my nfs mounts i.e. :
> >
> > mount to NFS server 'music.elkins' failed: server is down.
> >
> > nsfd appears to be running and I didn't see anything suspicious in the
logs.
> > The servers are up and running and have other clients connected.
>
> You didn't mention what steps you took to debug it:
>
> Can you ping the server?
> What is the output of rpcinfo -p servername?
> Does the server have access restrictions (firewall, TCP Wrappers, etc)?
I have the same symptoms...
rpcinfo says that nfs et.al. are running.
Something has changed in test 2, since the same PC running RH9
accesses that host just fine.
7 years, 10 months
autoconf breakage on x86_64.
by Sam Varshavchik
I don't know the right way to fix this, but something is definitely broken;
and something needs to be fixed, one way or the other. The question is what
exactly needs to be fixed.
Consider something like this:
LIBS="-lresolv $LIBS"
AC_TRY_LINK_FUNC(res_query, AC_MSG_RESULT(yes), AC_MSG_RESULT(no))
Here's what happens on x86_64:
gcc -o conftest -g -O2 -Wall -I.. -I./.. conftest.c -lresolv >&5
/tmp/ccW7EeDX.o(.text+0x7): In function `main':
/home/mrsam/src/courier/authlib/configure:5160: undefined reference to
`res_query'
collect2: ld returned 1 exit status
configure:5147: $? = 1
configure: failed program was:
[ blah blah blah ]
| /* We use char because int might match the return type of a gcc2
| builtin and then its argument prototype would still apply. */
| char res_query ();
| int
| main ()
| {
| res_query ();
| ;
| return 0;
| }
The same exact test on FC1 x86 will work.
The reason appears to be that you have to #include <resolv.conf> on x86_64
in order to succesfully pull res_query() out of libresolv.so. You don't
need to do this on x86, and the test program generated by AC_TRY_LINK_FUNC
does not include any headers, but uses a manual prototype.
So, what now?
17 years
Desktop Development Specialization
by Joel Juliano
What if Fedora Core development was divided in two divisions, the
GNOME division and the KDE division, the releases will be available to
be GNOME-only or KDE-only releases on seperate iso's, the GNOME ISO
will specializes only on GNOME softwares and applications. There will
be a micro-managed bug fixing for GNOME-only related softwares, the
effort will be concentrating on much more focused approach than the
traditional (hybrid ISO's), same to the KDE ISO, wherein include a
KDE-only related (or specialized) softwares and applications.
17 years, 10 months
[ANNOUNCE] Aurora Build-1.92 (Code Name Tangerine)
by Tom Callaway
Hi folks,
We now have a full set of sparc packages that match up to Fedora Core 2,
and its name is Tangerine. Did you know that of the top ten hits for
Tangerine on Google, none of them have anything to do with the fruit?
You should eat more tangerines, they're quite tasty and good for you.
But I digress.
Like the previous release (1.91), its not an installable tree
so again this means no ISOs.
I'm going to repeat this one more time: THERE ARE NO ISOS FOR 1.92.
Why? Because anaconda is hard, and people didn't want to wait another 6
months for me to figure out what is broken. However, if anyone is willing
to try on their own to get this working, we're happily accepting patches.
But, unless someone else takes up the charge, this tree branch will stop
at 1.92. If someone fixes anaconda so that the installer actually works past
keyboard selection, I'll spin a new tree.
In the meantime, we're refocusing the effort on a new tree, which is
currently going to be based on Fedora Core 3. You can follow the daily
notes for this work here: http://auroralinux.org/journal.php
Now, I have yumified the tree, so if you're feeling really brave, you
can always point yum at it, and try to upgrade that way. A version of
yum for Aurora 1.0 is here:
http://linux.duke.edu/projects/yum/download/1.0/yum-1.0.3-1_73.noarch.rpm
If you're running 1.91, you should be able to use the yum in that tree.
Going from 1.91 to 1.92 is reportedly a fairly painless process.
If you're a listed mirror site, please sync the build-1.92 directory,
and chime in. The primary directory is currently at:
ftp://ibiblio.org/pub/Linux/distributions/aurora/build-1.92/ (and)
ftp://auroralinux.org/pub/aurora/build-1.92/
Now, for the known bugs:
The "rpm" package in 1.92 is a little broken on sparc32 systems. Its my fault.
Fixed packages are already available from:
ftp://ibiblio.org/pub/Linux/distributions/aurora/updates/1.92/ (and)
ftp://auroralinux.org/pub/aurora/updates/1.92/
A temporary workaround is to run: export LD_ASSUME_KERNEL=2.2.5.
Build 1.92 uses SILO 1.4.8 which should work fine. It seems to occasionally
burp when you're trying to tab completion, but I can't reproduce this
consistently. If it breaks for you, let me know.
There is no SMP kernel for sparc32, upstream has marked this as broken.
Any other bugs that you find? Please either email me or file them in
bugzilla.auroralinux.org, under Corona.
Last but not least, we've setup a hardware support matrix Wiki to keep track
of what works and what doesn't. You can find it here:
http://auroralinux.org/cgi-bin/wiki.pl?HardwareCompatibility
Thanks for your continued patience and support,
~spot
---
Tom "spot" Callaway <tcallawa(a)redhat*com> LCA, RHCE
Red Hat Sales Engineer || Aurora SPARC Linux Project Leader
"If you are going through hell, keep going."
- Sir Winston Churchill
17 years, 10 months
slow booting on FC3
by Luya Tshimbalanga
For some reason, Fedora Core 3 boot slower than normal (about 3 minutes). When I verify the log, it seems to have no problem. Here is the kernel report:
Linux version 2.6.10-1.766_FC3 (bhcompile(a)bugs.build.redhat.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Wed Feb 9 23:06:42 EST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 GBT ) @ 0x000f6ce0
ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3000
ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff3040
ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x1fff7640
ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Built 1 zonelists
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03d3000 soft=c03d2000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1832.295 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514492k/524224k available (2045k kernel code, 9124k reserved, 655k data, 160k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3629.05 BogoMIPS (lpj=1814528)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) XP 2500+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0e20)
checking if image is initramfs... it is
Freeing initrd memory: 942k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb740, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20041105
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Via IRQ fixup
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
** PCI interrupts are no longer routed automatically. If this
** causes a device to stop working, it is probably because the
** driver failed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas(a)hp.com
** so I can fix the driver.
pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
pnp: 00:01: ioport range 0x40f0-0x40ff could not be reserved
pnp: 00:01: ioport range 0x5000-0x500f has been reserved
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1109419586.890:0): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key C1E8B138ABE583F2
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KM400/KM400A chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 128M @ 0xe0000000
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 11 (level, low) -> IRQ 11
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
ide0: BM-DMA at 0xac00-0xac07, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xac08-0xac0f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: WDC WD1200JB-00GVA0, ATA DISK drive
hdb: Maxtor 6E040L0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: CR-48XATE, ATAPI CD/DVD-ROM drive
hdd: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: Host Protected Area detected.
current capacity is 234439535 sectors (120033 MB)
native capacity is 234441648 sectors (120034 MB)
hda: Host Protected Area disabled.
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 >
hdb: max request size: 128KiB
hdb: Host Protected Area detected.
current capacity is 80291135 sectors (41109 MB)
native capacity is 80293248 sectors (41110 MB)
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
ide: failed opcode was: 0x37
hdb: 80291135 sectors (41109 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
hdb: cache flushes supported
hdb: hdb1 hdb2
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 9362)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 UAR1 ECP1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 160k freed
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel(a)redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 4 roles, 318 types, 20 bools
security: 53 classes, 10781 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SCSI subsystem initialized
libata version 1.10 loaded.
sata_via version 1.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 11 (level, low) -> IRQ 11
sata_via(0000:00:0f.0): routed to hard irq line 11
ata1: SATA max UDMA/133 cmd 0x9400 ctl 0x9802 bmdma 0xA400 irq 11
ata2: SATA max UDMA/133 cmd 0x9C00 ctl 0xA002 bmdma 0xA408 irq 11
ata1: no device found (phy stat 00000000)
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux Tulip driver version 1.1.13 (May 11, 2002)
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11
tulip0: MII transceiver #1 config 3100 status 7869 advertising 05e1.
tulip0: MII transceiver #2 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #3 config 1000 status 786d advertising 05e1.
tulip0: MII transceiver #4 config 1000 status 786d advertising 05e1.
divert: allocating divert_blk for eth0
eth0: ADMtek Comet rev 17 at e083c000, 00:04:5A:73:D0:B0, IRQ 11.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:11.5 to 64
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: irq 11, pci mem 0xeb01a000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0xb000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 10, io base 0xb400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 0xb800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: irq 11, io base 0xbc00
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
usb 2-1: new full speed USB device using uhci_hcd and address 2
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-2: new full speed USB device using uhci_hcd and address 3
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x067B pid 0x2305
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
usb 4-1: new low speed USB device using uhci_hcd and address 2
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
input: USB HID v1.00 Joystick [SAITEK P880] on usb-0000:00:10.2-1
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03697c0(lo)
IPv6 over IPv4 tunneling driver
divert: not allocating divert_blk for non-ethernet device sit0
usb 5-1: new low speed USB device using uhci_hcd and address 2
usbhid: probe of 5-1:1.0 failed with error -5
usb 2-1.1: new low speed USB device using uhci_hcd and address 4
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:10.0-1.1
usb 2-1.4: new full speed USB device using uhci_hcd and address 5
input: Wacom Graphire2 4x5 on usb-0000:00:10.3-1
usbcore: registered new driver wacom
drivers/usb/input/wacom.c: v1.30:USB Wacom Graphire and Wacom Intuos tablet driver
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: USB Storage-SMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-CFC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-MMC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
Vendor: Generic Model: USB Storage-MSC Rev: 0090
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: device scan complete
Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev hdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev hda1, type vfat), uses genfs_contexts
EXT3-fs: Unrecognized mount option "umask=0" or missing value
Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
Anyone knows how to solve that issue?
--
_______________________________________________
Get your free email from http://mymail.jp.popstarmail.org
Powered by Outblaze
18 years, 5 months
MSI K8N Platinum/Diamond audio detection NEWS
by Cimmo
Hi,
I've discovered a lot of thing about my integrated audio in my MSI K8N
Platinum that has a Creative Sound Blaster Live! 24 bit.
There is a bug in alsa 1.0.8 that prevent the correct detection of MSI
K8N's audio chip.
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=901
Bug will be fixed in 1.0.9 and is just fixed in CVS.
In 2.6 kernel the patch is already in 2.6.12rc1
FROM
http://www.kernel.org/pub/linux/kernel/v2.6/testing/ChangeLog-2.6.12-rc1
<perex(a)suse.cz>
[ALSA] Add support for Audigy2LS on MSI motherboard
CA0106 driver
Add support for Audigy2LS on MSI motherboard.
Fixes Bug #0901
Signed-off-by: James Courtier-Dutton <James(a)superbug.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai(a)suse.de>
Fedora Core 4 kernel version 2.6.11-1.1191_FC4 has all 2.6.12rc1 patches
(right?) and also alsa patch for MSI.
So I've installed this kernel, now soundcard seems to work but still
this issues:
1) volume control panel won't open (I've used alsamixer to put up the
volume but no luck)
2) if I play an audio file seems to be played well (with old kernel no
soundcard alert popup), but there is no sound.
3) system-config-soundcard still crash (I think it is unrelated to my
audio chip) --> see attachment.
I'm the only one that I've this kind of motherboard and Fedora Core 4
test 1????
help please
Marco
/usr/share/system-config-soundcard/soundcard.py:75: GtkDeprecationWarning: gtk.FALSE is deprecated, use False instead
self.box = gtk.VBox(gtk.FALSE, 8)
Traceback (most recent call last):
File "/usr/share/system-config-soundcard/system-config-soundcard.py", line 46, in ?
app = soundcard.childWindow()
File "/usr/share/system-config-soundcard/soundcard.py", line 87, in __init__
self.device, self.module, self.maker, self.model = self.soundcardBackend.getData(card)
File "/usr/share/system-config-soundcard/soundcardBackend.py", line 106, in getData
maker, model = string.split(description, " ", 1)
ValueError: need more than 1 value to unpack
18 years, 5 months
Kernel Crash with FC3 [glibc?]
by Stephen John Smoogen
My home router machine was upgraded in late December to FC3. The
machine began experiencing times when it would start having a load
average of 1.00 all the time but using top would show no processes
using any CPU. The CPU indicator said that it was at 100% in user
space. No process was listed as being in device wait either.
I took the machine down and did a chkrootkit 0.44 and some other items
to make sure it was not compromised. I then rebooted the box and
watched the wire to see if anything strange was coming up to it.
Nothing. I then went and turned off various processes that were turned
on for small network usage. When I did a 'service nscd off' the box
went into a kernel crash that went on for quite some time (looked like
an infinite loop).
Turning off nscd has dropped the load average to a standard 0.00 again
so I am guessing that there is something it is doing that is causing
issues:
nscd-2.3.4-2.fc3
kernel-2.6.9-1.681_FC3
kernel-2.6.9-1.724_FC3
00:00.0 Host bridge: Intel Corp. 82810 DC-100 GMCH [Graphics Memory
Controller Hub] (rev 03)
00:01.0 VGA compatible controller: Intel Corp. 82810 DC-100 CGC
[Chipset Graphics Controller] (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02)
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02)
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
01:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:0c.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
I am having problems getting serial console to work so I do not have a
kernel oops at the moment :(.
--
Stephen J Smoogen.
CSIRT/Linux System Administrator
18 years, 5 months
