Roger Grosswiler wrote: > I installed 9.92 recently my dell latitude. Everything went well until the first boot. > > The system didn't ask for the disk-encryption-password, the plymouth-progress-bar > moved > and hung at the end. I rebooted, supressed rghb and quiet in in grub and found the > following messages > > - Logical Volume not found (There is a Bug filed in Bugzilla, hoping this meets also > my > problem) > - Boot failed > > finito, basta. > > I couldnt make my mkinitrd as i didnt have modules installed. I tried also a newer > kernel from koji. Same effect. > > Does anybody know, if there is hope to get this resolved? I just got it running when > installing from live-cd. > > I have also some sideeffects i didnt have with 3d desktopeffects, i havent had when i > installed fresh from rawhide and everything went well. > > at least, with the kernel from 9.91 (livecd) i have a working system to test. > > Bugzilla: > https://bugzilla.redhat.com/show_bug.cgi?id=466071 > https://bugzilla.redhat.com/show_bug.cgi?id=466607 > > Which Kernel ( had this with -58 ) Updating the kernel or use a older one worked for me suggest you get the latest from koji -69 ( http://koji.fedoraproject.org/koji/buildinfo?buildID=68170 ) Also you might need to update your mkinitrd to the latest one 69-1 ( http://koji.fedoraproject.org/koji/buildinfo?buildID=68122 ) JBG --

Roger Grosswiler wrote: >> Roger Grosswiler wrote: >> >>> I installed 9.92 recently my dell latitude. Everything went well until the first >>> boot. >>> >>> The system didn't ask for the disk-encryption-password, the plymouth-progress-bar >>> moved >>> and hung at the end. I rebooted, supressed rghb and quiet in in grub and found the >>> following messages >>> >>> - Logical Volume not found (There is a Bug filed in Bugzilla, hoping this meets also >>> my >>> problem) >>> - Boot failed >>> >>> finito, basta. >>> >>> I couldnt make my mkinitrd as i didnt have modules installed. I tried also a newer >>> kernel from koji. Same effect. >>> >>> Does anybody know, if there is hope to get this resolved? I just got it running when >>> installing from live-cd. >>> >>> I have also some sideeffects i didnt have with 3d desktopeffects, i havent had when >>> i >>> installed fresh from rawhide and everything went well. >>> >>> at least, with the kernel from 9.91 (livecd) i have a working system to test. >>> >>> Bugzilla: >>> https://bugzilla.redhat.com/show_bug.cgi?id=466071 >>> https://bugzilla.redhat.com/show_bug.cgi?id=466607 >>> >>> >>> >> Which Kernel ( had this with -58 ) Updating the kernel or use a older >> one worked >> for me suggest you get the latest from koji -69 >> ( http://koji.fedoraproject.org/koji/buildinfo?buildID=68170 ) >> >> Also you might need to update your mkinitrd to the latest one 69-1 >> ( http://koji.fedoraproject.org/koji/buildinfo?buildID=68122 ) >> >> JBG >> -- >> > > Thx, gonna try this. was installing .68 kernel from koji yesterday, but not > mkinitrd-package. I gonna use .69 kernel and mkinitrd. is there any further action to > do, or is the installtion of those 3 packages (kernel-firmare) enough? > > Thanks, > Roger > > You need of course pull in the relevant packages regarding mkinitrd ( deps ) Just install mkinitrd before installing the -69 kernel. JBG. -- fedora-test-list mailing list fedora-test-list(a)redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-test-list

On Fri, Oct 31, 2008 at 01:21:10PM +0100, Roger Grosswiler wrote: > > ok. i downloaded the following from koji and gonna install this this night: > > 1) libbdevid-python-6.0.69-1.fc10.i386.rpm > 2) nash-6.0.69-1.fc10.i386.rpm > 3) mkinitrd-6.0.69-1.fc10.i386.rpm > 4) kernel-firmware-2.6.27.4-69.fc10.noarch.rpm > 5) kernel-2.6.27.4-69.fc10.i686.rpm > > Can i use rpm -U for others than the kernel or is -i more secure? If you are not sure then, in a directory with downloaded rpms, do yum --nogpgcheck update *6.0.69-1.fc10* yum --nogpgcheck update k*2.6.27.4-69.fc10* Note - no quotes this time. You _want_ a shell expansion to happen.

Michal Jaegermann wrote, On 10/31/2008 11:37 AM: I am not sure if the below yum commands will obey the install only kernel settings you normally get with yum, but I suspect they might. > >Oops! Sending too fast. Sorry. Make the above into "localupdate": > > yum --nogpgcheck localupdate *6.0.69-1.fc10* > yum --nogpgcheck localupdate k*2.6.27.4-69.fc10*

On Fri, Oct 31, 2008 at 09:31:28AM -0600, Michal Jaegermann wrote: > On Fri, Oct 31, 2008 at 01:21:10PM +0100, Roger Grosswiler wrote: > > > > ok. i downloaded the following from koji and gonna install this > > this night: > > > > 1) libbdevid-python-6.0.69-1.fc10.i386.rpm > > 2) nash-6.0.69-1.fc10.i386.rpm > > 3) mkinitrd-6.0.69-1.fc10.i386.rpm > > 4) kernel-firmware-2.6.27.4-69.fc10.noarch.rpm > > 5) kernel-2.6.27.4-69.fc10.i686.rpm > > > > Can i use rpm -U for others than the kernel or is -i more secure? > > If you are not sure then, in a directory with downloaded rpms, do > > yum --nogpgcheck update *6.0.69-1.fc10* > yum --nogpgcheck update k*2.6.27.4-69.fc10* > > Note - no quotes this time. You _want_ a shell expansion to happen. Oops! Sending too fast. Sorry. Make the above into "localupdate": yum --nogpgcheck localupdate *6.0.69-1.fc10* yum --nogpgcheck localupdate k*2.6.27.4-69.fc10* Michal