x86-64 or dual MP
by Jon Shorie
We are upgrading one of our servers this year that is used to run perl apps in
apache and mysql databases. I am looking at two different options that all
cost about the same money. They all have 1GB ECC Ram and dual 80 GB hard
drives.
The only real differences are the cpus.
One has Dual Athlon MP 2200's
The other has a single Socket 754 Athlon 64 3700+
Which should give me better performance if I am running Fedora Core 3 on the
box?
Jon Shorie
Systems Administrator
Medina County Sanitary Engineers
19 years, 1 month
Top Posting....
by Crisler, Jon
Personally, when dealing with very active lists and following the
thread, top posting is a time saver. I think this falls into the realm
of personal preference, some people like it, some not....
The information contained in this e-mail including any attachments may constitute Corvis Equipment Corporation Proprietary Information that is subject to Non-Disclosure Agreement and cannot be disclosed to any other party without the express consent of Corvis Corporation.
If you are neither the intended recipient of this e-mail nor responsible for delivering this e-mail to the intended recipient, note that any dissemination, distribution, copying, or retention of this e-mail is prohibited.
If you believe you have received this e-mail in error, we request that you notify the sender by return e-mail and then delete this e-mail and any return email immediately.
19 years, 1 month
no energy module for kcmshell in FC3
by raray＠jam.rr.com
When I upgraded from FC2 to FC3 I noticed my monitor would no longer
change to power save mode. I see that under FC2 this is done in kcontrol
by the energy module . Under FC3 when I run "kcmshell --list" there is no
energy module. Has this changed to a different module?
Thanks
Richard Ray
19 years, 1 month
Xorg problems with latest 6.8.2 patch?
by Claude Jones
The following error appears while running xdosemu, a program that was
functioning perfectly before the latest Xorg patch:
/usr/X11R6/lib/libXxf86vm.so.1: undefined symbol: XextFindDisplay
Is this a problem with Xorg?
--
Claude Jones
Bluemont, VA, USA
/usr/X11R6/lib/libXxf86vm.so.1: undefined symbol: XextFindDisplay
19 years, 1 month
device icons on the desktop
by Manojav Sridhar
hello,
i recently upgraded to Kde 3.4 w/ hal/dbus support. my question is that
when i plug in certain devices i get a device icon on my desktop like my
Sony digital (usb) camera. but when i plug in my Rio Forge. it doesn't
create an icon for me. i am guessing the Rio device has not been setup
to show the icon.
where is the file the describes what devices popup on my desktop and
which ones dont.
both of them mount properly in /media/FORGE and /media/usbdisk (for the
camera). i have posted this on the kde list as well.
thanks
manojav
FC3, clean install, upgraded to KDE 3.4
19 years, 1 month
Connexant ADSL firewall/router VPN to Linux box
by Gary Stainburn
Hi folks.
Subject says it all. What the best way to set this up so that the VPN's
transparent.
Gary
--
Gary Stainburn
This email does not contain private or confidential material as it
may be snooped on by interested government parties for unknown
and undisclosed purposes - Regulation of Investigatory Powers Act, 2000
19 years, 1 month
(no subject)
by bulent acikgoz
hello friends,
when ı run yum upgrade, I took this message;
Downloading Packages:
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Updating: xorg-x11 100 % done 1/2
error: unpacking of archive failed on file /etc/X11/xkb: cpio: rename
Updated: xorg-x11.i386 0:6.8.2-1.FC3.13
Complete!
do you have any suggestion..???????
Bulent Acikgoz
DBA & System Administrator
Adress: ODTU MM Binasi No:320 Balgat/Ankara/TURKEY
Work :+903122103810
Mobile:+905325639505
19 years, 1 month
wireless error
by jim lawrence
[root@JimsNotebook ~]# system-config-network
Warning : Device eth1 has been compiled with version 17
of Wireless Extension, while we are using version 16.
Some things may be broken...
How can i fix this ?
--
Jim Lawrence
Registered Linux User: #376813
********************************************************
When I'm feeling down, I like to whistle.
It makes the neighbor's dog run to the end of his chain and gag himself.
************************************
19 years, 1 month
HAL broken after upgrade to FC3
by Muyiwa Taiwo
I upgraded to kernel 2.6.10-1.770_FC3 a couple of weeks ago from
2.6.9-1.667, and also upgraded HAL to 0.4.7-1.FC3. Since then, HAL has
stopped working. On system start, it shows that it starts normally, but
it actually dies silently (as revealed by "service haldaemon status",
which shows that hald is stopped). The effect of this is that my USB
drives (hard disks, floppy, memory disk, camera, etc., are no longer
automatically mounted when they're plugged in. I can mount them
manually, but that means that I've got to go to System Logs to find out
what they're called.
I've tried re-installing HAL 0.4.0-10, but this didn't help. I've also
downloaded and run the latest initscripts, still no show. I've searched
numerous mailing lists, but there doesn't seem to be a fix. Am I
looking in the wrong places?
My configuration is:
- Toshiba TE2000 laptop
- udev-039-10.FC3.7
- hotplug-2004_04_01-8.1
- hal-0.4.7-1.FC3
- kernel: 2.6.10-1.770.FC3
Any help appreciated.
Thanks
MT
19 years, 1 month
Regarding Installation of Duplex Printer HP LJ1320
by Karun
to install HP LaserJet 1320 printer on Fedora Core 3 i
downloaded the ppd file of the printer from
www.linuxprinting.org, and imported the ppd file into
the printer database using printconf command.
now when i install the printer it detects the printer
but to enable the printer in duplex mode i need to
edit the printer configuration. when i press the edit
button on the printconf menu, i get the following
errors.
Couldn't load driver information.
Traceback (most recent call last):
File "/usr/share/printconf/util/queueTree.py", line
600, in edit_button_clicked
if self.editQueue.editQueueDialog (iter):
File "/usr/share/printconf/util/editQueue.py", line
414, in editQueueDialog
self.write_driver_options ()
File "/usr/share/printconf/util/editQueue.py", line
922, in write_driver_options
for option_tuple in option_list:
TypeError: iteration over non-sequence
after this nothing comes up.
Kindly suggests a solution to the problem
Karun Verma
You can also mail me at karun.verma(a)gmail.com & karun.verma(a)tiet.ac.in
Office Address:
Karun Verma
System Analyst -cum- Programmer,
School of Mathematics and Computer Applications,
Thapar Institute of Engineering & Technology,
Patiala. 147004
Ph: 01752393341
Mobile:+919888003791
Home Address:
#520-A/13, Old Bishan Nagar,
Patiala -147003
Ph: 01752373791
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
19 years, 1 month
