Changing the Color Coded Filesystem
by General Manager
Hello,
Can Anyone tell me how I can change the color files systems. The color blue
for the "Directories" is really hard to see.
Also is there a way to change the background color?
Thanks
17 years, 5 months
Issues w/ Xorg 7.0, Dell L610, and i810 drivers
by Philip Prindeville
I'm using a Dell L610 to run FC5 (updated), and it has an i915GM controller,
which uses the i810 drivers...
I can't seem to configure it correctly (I've attached the config I'm
using). It
seems to have two issues.
(1) it probes for the monitor DDC sync values, which disagree with what I've
explicitly configured, but looking at the Xorg.0.log file, it gives
no indication
of what the EDID actually said the values were (grrr... you can never
have too
much logging).
(2) it then complains that "1400x1050" isn't a known modeline (no mode of
this name), even though I've explicitly configured a modeline with that
exact setting.
and the second head (in this case, connected to a Dell 1704FPV via DVI
hanging off a port-replicator) never seems to light up.
I've attached both the config and the log file. If anyone has had luck with
this, please let me know.
Thanks,
-Philip
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "Screen0" LeftOf "Screen1"
Screen 1 "Screen1" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
Load "synaptics"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapMove" "110"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Dell"
ModelName "Dell 1400x1050 Laptop Display Panel"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 90.0
VertRefresh 59.0 - 75.0
ModeLine "1400x1050" 108.0 1400 1444 1556 1688 1050 1050 1053 1066
Option "noDDC" "true"
Option "dpms"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Dell"
ModelName "Dell 1704FPV (Digital)"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 81.0
VertRefresh 56.0 - 76.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Intel Corporation"
BoardName "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
Screen 0
EndSection
Section "Device"
Identifier "Videocard1"
Driver "i810"
VendorName "Intel Corporation"
BoardName "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:1"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1400x1050" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Videocard1"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
17 years, 5 months
FC 5 cd/dvd,floppy devices missing.
by david walcroft
Hi,
As the header states I have no devices in fstab,media or desktop
setup. How do install them, I guess a package didn't get installed
Thanks david
17 years, 6 months
kudzu and modems.
by akonstam@trinity.edu
I can't understand the behavior of kudzu in respect to my serial
modem. After initial installation it detects the modem but after that
it is ignored. What I mean is I can remove the modem and kudzu ignores
the change, or I can remove the modem from the kudzu database and
kudzu ignores the change. I can run: kudzu --class MODEM and kudzu
will remove all my hardware from its database except the MOUSE but it
still ignores the modem.
How can I get kudzu to notice that I have changed, removed or added
the modem?
--
-------------------------------------------
Aaron Konstam
Computer Science
Trinity University
One Trinity Place.
San Antonio, TX 78212-7200
telephone: (210)-999-7484
email:akonstam@trinity.edu
17 years, 7 months
Stopping linux/KDE from automounting usb drives
by Dan Smith
Hello,
Is there any way to stop fedora/kde from mounting USB drives as soon as they are plugged in?
I know I can stop the behavoir for a single drive, but I would like to stop it for anything that is plugged into the system.
Thanks,
formulafiero(a)yahoo.com
---------------------------------
Yahoo! Sports Fantasy Football 06 - Go with the leader. Start your league today!
17 years, 7 months
fc5: install everything?
by K. Richard Pixley
fc5 installer has me confused and stumped. Could someone please tell me
where to find the "install everything" option?
--rich
17 years, 7 months
compiz on fc5
by Kazimieras Vaina
Hi,
I found an unofficial yum repo with xgl and compiz:
http://users.telenet.be/quenta/repo/
I installed all packages from there, but Xgl failed to start. It says
that "function not implemented" or something like that. I suspect that
mesa packages shipped in fc5 are not compatible with xgl...
Anybody using this repo ? I'm too lazy to compile it from source.
--
Kazimieras <kazimieras.vaina(a)gmail.com>
17 years, 7 months
ps to pdf and then to text editor
by Paul Smith
Dear All
I print to a file, file.ps, a web-page with text. Then, I apply ps2pdf
and I get file.pdf. However, I cannot copy (from file.pdf) the text to
a text editor. Can one get a pdf file with copyable text?
Thanks in advance,
Paul
17 years, 7 months
OpenGL problems
by Ali Helmy
Hey lads,
I need to ask some help of you... here's my dilemma:
I wanted to install the TuxRacer <http://tuxracer.sourceforge.net/> game, so
i downloaded the .tar.gz file, and unpacked... on running ./configure
though, i got the following message:
configure: error: Your copy of glx.h is out of date. You can get a more
recent copy from the latest Mesa distribution (http://mesa3d.sourceforge.net
).
So, I strolled over to mesa3d and downloaded their latest installed library
pack... then when trying to install it by make install, i got:
mkdir ${INCLUDE_DIR}
mkdir: cannot create directory `/usr/local/include': File exists
mkdir ${INCLUDE_DIR}/GL
mkdir: cannot create directory `/usr/local/include/GL': File exists
mkdir ${INCLUDE_DIR}/GLES
mkdir: cannot create directory `/usr/local/include/GLES': File exists
mkdir ${LIB_DIR}
mkdir: cannot create directory `/usr/local/lib': File exists
cp -f ${TOP}/include/GL/*.h ${INCLUDE_DIR}/GL
cp -f ${TOP}/src/glw/*.h ${INCLUDE_DIR}/GL
# NOT YET: cp -f ${TOP}/include/GLES/*.h ${INCLUDE_DIR}/GLES
cp ${CP_FLAGS} ${TOP}/lib*/lib* ${LIB_DIR}
echo "Done."
Done.
Now, when i try and install tuxracer, i get the same message of the
out-dated glx header... so, i don't really know what to do...
Ideas?
--
A. Helmy
17 years, 8 months
vi editor
by Kaushal Shriyan
Hi ALL
Inside vi editor when I am in command mode
For Example : If I want to know the hostname or pwd command How do i execute
inside the Vi Editor while editing a file in command mode
Thanks
Kaushal
17 years, 8 months