users October 2008

users@lists.fedoraproject.org

429 participants
612 discussions

[FC8] ssh and CAC card???
by Todd Denniston 17 Sep '24

17 Sep '24

From what I understood, the change to openssh listed in: rpm -q --changelog openssh |less as: "* Wed Jun 20 2007 Tomas Mraz <tmraz(a)redhat.com> - 4.5p1-7 - experimental NSS keys support - correctly setup context when empty level requested (#234951) " was supposed to allow the Common Access Card (CAC) to work with the shipped Fedora 8 ssh. As per NSS usual, everything is undocumented, i.e., `ssh-add --help` does not help at all, and `man ssh-add` points to `ssh-add -s reader` # ssh-add -s 0 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 0 # ssh-add -s 1 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 1 So does anyone know how to use the possible functionality, or are we reduced to reading the source? -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter

4 8

This list's search engine not working?
by HaJo Schatz 22 May '24

22 May '24

Ever since I stumbled across this list, I seem to have major difficulties searching the archives. Say I want to see my posts to the list (they all have the same footer as below), I believe I could go to http://www.redhat.com/archives/fedora-list/ and enter "HaJo" as a search string. Searching in all sections, I get 0 results. Does the search engine ignore me by some reason? BTW -- I've been posting since about June, and when showing the archives sorted by author, I do find my posts. OK, not the most helpful to search for my own posts, but I do have the same issue when searching for given topics. Any other search engine out there indexing this list reliably? Google shows 0 hits on a "site:www.redhat.com/archives/fedora-list/" search... -- HaJo Schatz <hajo(a)hajo.net> http://www.HaJo.Net PGP-Key: http://www.hajo.net/hajonet/keys/pgpkey_hajo.txt

4 5

Re: Tomcat
by Rahul Sadotra 21 May '24

21 May '24

Hi Michael, --- Michael Folin <michael.folin(a)donator.se> wrote: > how do I install Tomcat i fedora? > can't find it during the installation > If you mean during the installation of Fedora Core itself, then I don't think Tomcat is provided with Fedora Core (please feel free to correct me if I'm wrong). This means you will probably need to download Apache Jakarta Tomcat (either binaries, or the source which you'll need to build) and install it. Hope this helps. All the best, Rahul ___________________________________________________________ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com

2 1

SATA optical drives
by David Fletcher 22 Jun '23

22 Jun '23

I'm currently running FC5, will probably upgrade to F7 in a couple of months. Unfortunately my CD/DVD rewriter appears to have died, before it's even seen a dual layer disk :'( SATA hard drives run without problems for me, but now that SATA optical drives are starting to appear in the shops, would it be OK to buy one of these and get rid of another wide ribbon cable? Is anybody already running them with Fedora? Thanks for any advice/experiences. Dave F

5 4

Changing date with procmail
by Michael A. Peters 08 Jun '22

08 Jun '22

Anyone know of a procmail recipe to change the date on incoming messages? If the date is in the future by more than 24 hours - I'd like to just change it to the current date. If the date is in the past by more than two weeks - I'd like to just change it to the current date. I'd like to do it in procmail - if someone knows how. I've done some searching, still have some to do. Found some stuff on extracting the date, but not on modifying it if necessary.

5 5

VPN options
by Keith Lofstrom 08 Nov '19

08 Nov '19

I am planning on running a Virtual Private Network from my Fedora firewall out to a UML virtual colo (running RH9) at another site. That site will be the place I present services to the world; httpd, ssh, sftp, smtp. This is to comply with the "no servers" and dynamic ip restrictions on my Comcast connection to the net; if my firewall always drives an outbound connection to the colocation site, I am not worried about changes of ip address, and I am not opening any inbound ports. There are a number of options for the VPN - the most attractive are cipe ( http://sites.inka.de/sites/bigred/devel/cipe.html ) and FreeSwan ( http://www.freeswan.org/ ), though I am told that one can do all this through an ssh tunnel. I would rather have simple and secure than super-duper; I have plenty of bandwidth, and will send outbound http and smtp from the firewall, so the main bandwidth user will be incoming spam/b/b/b/b mail. Anyone have some experiences to share about setting up VPN? Is there anything about either cipe or FreeSwan that is likely to break with FC1 or FC2? Keith -- Keith Lofstrom keithl(a)ieee.org Voice (503)-520-1993 KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon" Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs

8 8

Problems with 3COM 3C900Combo
by Christian Moller 05 Jun '15

05 Jun '15

Hi all Fedora users, I have just joined this list. I am running the latest Fedora but I can't get my 3C900Combo networking card to work. I can see that the card is installed but no IP-address is asigned to it and I can't set it. So I think that there is a bug in that driver. Any other user out there who have a solution for this? Best regards and thanks, Christian

2 1

RAGE XL Framebuffer
by Yanick Quirion 05 Jun '15

05 Jun '15

Hi all I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list. Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today. If somebody has a patch, a link or anything else that can help me, it will be appreciated. Thanks for your help. Regards, ----------- Yanick Quirion Administrateur Réseau/Network Manager NEOKIMIA INC. Institut de Pharmacologie de Sherbrooke 3e étage (Édifice Z5) 3001 12e avenue Nord Sherbrooke, Québec CANADA J1H 5N4 Tél.: +1 819 820-6040 Direct: +1 819 820-6855 Fax.: +1 819 820-6841 email: Yanick.Quirion(a)neokimia.com

2 1

Soundblaster
by Antonio Montagnani 05 Jun '15

05 Jun '15

I have two similar PC (old Pentium but workin fine) In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster is working fine In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora doesn't see any card, that was working on Redhat 9 after soundconfig... Where is the trick?? I assume that my Sounblaster is an old 16...but fine on a router/firewall. Tnx Antonio

4 6

Re: How to play .AU files with Fedora?
by William W. Austin 17 Dec '09

17 Dec '09

On Thu, 20 Sep 2007, Mike McCarty wrote: > I have some .AU files which have no association under GNOME. > I tried the "media player", and no sound comes out. > "Music Player" won't recognize them at all. > > What app should I associate to play .AU files? > I have some .AU files which have no association under GNOME. > I tried the "media player", and no sound comes out. > "Music Player" won't recognize them at all. > > What app should I associate to play .AU files? AU files are Sun audio files - I have a very large number of them on a Sun server. Many of those do not play well on either of 2 f7 boxen (dual-core Athlon, if relevant - YMMV). However, so far _all_ of the ones I have tried work find with /usr/bin/aplay which is part of the alsa-utils package. Good luck -- william w. austin waustin(a)speakeasy.net "life is just another phase i'm going through. this time, anyway ..."

2 1

Jump to page: