i am using Fedora Beta (Rawhide) .
After powering on my laptop grub shows up, but does not automatically after
timeout (5s) start loading , but does nothing.
I have to press enter to start ...
my grub.conf :
title Fedora (184.108.40.206-39.fc10.i686)
kernel /vmlinuz-220.127.116.11-39.fc10.i686 ro
root=UUID=2a05c0a0-3982-407d-940e-0086e3844820 rhgb quiet
Thanks in advance!
I'm using Fedora 8 on my laptop. The library known as
"libstdc++-libc6.1-1.so.2" isn't there, which I need to run Maple 7 on
my computer. This should be a part of the compat-libstdc++-296 RPM, as
this library was originally a part of RHL 7.3 and 8.0 in libstdc++, and
available in the compat-libstdc++-7.3-2.96.118 RPM for RHL 9. Does
anybody know why this file was removed from the compat-libstdc++-296
RPM, and what I can do to get it from the SRPM again? (I'm guessing
theoretcially it should still be part of the source code.)
I was spec'ing a new laptop tonight, and noticed it had 1 GB of 'Turbo
Memory' -- this is a new Intel specification that uses flash memory to cache
frequently used items and is only available in Windows-land with Vista. It is
not CPU cache nor RAM.
Does anyone know of any work being done to access this new technology in
Brunswick, MD, USA
I've been advised, more or less btw in an otherwise scarcely
related thread, to quit using my KVM switch (which has spare USB ports
touted by the maker especially for printserving) as a printserver.
So I plugged the printer (an HP psc 1315v) into my #1 machine;
and I've been telling Firefox 127.0.0.1:631 on each of the machines, and
trying to get it to work.
I thought I had it; and when I print at all, it's most often from
Alpine 2.0. So I've been trying to print one Alpine message from each
One at least told me the printer seemed not to be connected. The
others have adamantly done nothing.
Since all I know of printing would go in a gnat's eye, and Alpine
has several printing options (none of which I understand well), my first
thought is to try to find out if I have a pure Alpine problem, a pure
CUPS problem, or something else. Can anybody tell??
Beartooth Staffwright, PhD, Neo-Redneck Linux Convert
Remember I know precious little of what I am talking about.
I have a Dell Inspiron 530S desktop with an Nvidia graphics card.
The hardware is at
The machine runs F8 fully up to date and has kmod-nvidia installed.
The desktop is KDE3.5
Almost everything runs well and without any problems - but for a long
time there has been a really awful colour problem when running Real video
Two examples of the problem are on the screenshots at:
These were obtained by going to the test page at
and running the videos - it does not seem to make any difference installing
a different version of Realplayer.
I have the same setup on a different machine with different hardware and
not running kmod-nvidia and there is no problem with colour with the same
Flash video on web pages is fine and I am not aware of other colour issues but
I have been unable to fathom out how to fix this problem.
Does anyone have any hints as to what I may do, or a workaround, or
suggestion as to where I might look to fix this?
I have a cron job that runs 'find /' as root, keeps blowing up when
encountering ~/.gvfs in my home dir. Permissions are set like so:
ls -la ~/.gvfs
dr-x------ 2 tburns isys 0 2008-10-13 07:43 .
drwxr-xr-x 73 tburns root 4096 2008-10-24 11:49 ..
As owner of dir, no problem:
find /users/tburns ! -name .gvfs |grep gvfs
As root, boom:
sudo find /users/tburns ! -name .gvfs |grep gvfs
[sudo] password for tburns:
find: /users/tburns/.gvfs: Permission denied
When I create another similar directory, same permissions, root has no
problem with it. But note ***the copy has a different file size
(original size=0, copy size=4096)***:
[tburns@cod ~]$ cp -pr .gvfs .gvfscopy
[tburns@cod ~]$ ls -la .gvfscopy
dr-x------ 2 tburns isys 4096 2008-10-13 07:43 .
drwxr-xr-x 76 tburns root 4096 2008-10-29 10:56 ..
[tburns@cod ~]$ sudo find /users/tburns/.gvfscopy
.gvfs is using some secret sauce that I don't understand to prevent
root from accessing it. Is there some ACL stuff going on here?
(getfacl results are boring.) File locking? (lsof says it is not
open.) Corruption? How can it be that root is denied? I wonder what
would happen if I deleted .gvfs and recreated it manually with
I tried googling gvfs and permissions, got many many irrelevant hits.
Some hits described a similar problem, but always veer off to a
workaround for their specific situation, no general solution. Please
at least give me a hint what to do or what to google for.
My brain hurts!
reposting the question on this forum because I think the problem is with
Fedora not madwifi
I am trying to use Adhoc mode with AR5413 card (5006 chipset) with following
Linux localhost.localdomain 2.6.25-14.fc9.i686 #1 SMP Thu May 1 06:28:41 EDT
2008 i686 athlon i386 GNU/Linux
There are 2 machines running F9/madwifi and having same cards in adhoc mode.
(livna - madwifi-0.9.4-1.lvn9.i386, kmod-madwifi-0.9.4-31.lvn9.i686,
In adhoc mode, they associate with each other (same cell ID) but are not
able to further communicate. ath0 interface created on top of wifi0 does not
receive any packets but wifi0 do receive. I am not able to ping one from
another. routes are set.
ath0 IEEE 802.11g ESSID:"wmnad" Nickname:"localhost.localdomain"
Mode:Ad-Hoc Frequency:2.412 GHz Cell: 02:02:6F:51:77:3A
Bit Rate:0 kb/s Tx-Power:15 dBm Sensitivity=1/1
Retry:off RTS thr:off Fragment thr:off
Link Quality=46/70 Signal level=-41 dBm Noise level=-87 dBm
Rx invalid nwid:7069 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ath0 Link encap:Ethernet HWaddr 00:02:6F:51:77:3A
inet addr:18.104.22.168 Bcast:22.214.171.124 Mask:255.255.255.0
inet6 addr: fe80::202:6fff:fe51:773a/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:527 errors:0 dropped:0 overruns:0 carrier:0
RX bytes:0 (0.0 b) TX bytes:23013 (22.4 KiB)
wifi0 Link encap:UNSPEC HWaddr
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:233405 errors:0 dropped:0 overruns:0 frame:41464
TX packets:18774 errors:25 dropped:0 overruns:0 carrier:0
RX bytes:33609299 (32.0 MiB) TX bytes:1602695 (1.5 MiB)
On both machines ath0 RX packets remains 0 and I don't know why is this
happening!!! Can someone please help..
I think that there no problems with ath_pci loading as can be seen -
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ath_rate_sample: 1.2 (0.9.4)
wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
24Mbps 36Mbps 48Mbps 54Mbps
wifi0: H/W encryption support: WEP AES AES_CCM TKIP
wifi0: mac 10.4 phy 6.1 radio 6.3
wifi0: Use hw queue 1 for WME_AC_BE traffic
wifi0: Use hw queue 0 for WME_AC_BK traffic
wifi0: Use hw queue 2 for WME_AC_VI traffic
wifi0: Use hw queue 3 for WME_AC_VO traffic
wifi0: Use hw queue 8 for CAB traffic
wifi0: Use hw queue 9 for beacons
wifi0: Atheros 5212: mem=0xfdef0000, irq=18
ath0: no IPv6 routers present
ADDRCONF(NETDEV_UP): ath0: link is not ready
ADDRCONF(NETDEV_CHANGE): ath0: link becomes ready
ath0: no IPv6 routers present
ath0: no IPv6 routers present
My configuration file for interface is like -
# Please read /usr/share/doc/initscripts-*/sysconfig.txt
# for the documentation of these parameters.
In last 3 lines, I overdid security because initially I thought the problem
is due to authentication. I don't want any security at this point.
[ Other tests -
- the same card works in managed mode and connects to my building's WLAN AP.
This makes me wonder more what I doing wrong.
- same cards with madwifi 0.9.4 works on Ubuntu in ad-hoc mode which shows
that something in Fodora is going wrong. I really like F9 and really don't
want to switch to ubuntu. ]
Any help is really appreciated.
Thanks in advance,
Firefox 3 was hanging on certain websites. I downgraded to Fedora 2.0.17
. Now when I click on a link in a Thunderbird email I get a box with the
Error showing url: There was an error launching the default action
command associated with this location.
Can anyone tell me how/where to fix the 'default action command'?
I can't run cpuspeed on my wife's notebook:it's a Acer Aspire 3630 and
it use a Intel Celeron CPU.
FC8 and kernel 126.96.36.199-49.fc8.
I even can't load the acpi_cpufreq module, this is the error message:
FATAL: Error inserting acpi_cpufreq
No such device
And BTW, what is the correct value I have to in the file
/etc/sysconfig/cpuspeed in the line DRIVER ?
I put down here some info, please let me know if you need others.
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 13
model name : Intel(R) Celeron(R) M processor 1.60GHz
stepping : 8
cpu MHz : 1600.097
cache size : 1024 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca
cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx up bts
bogomips : 3201.58
clflush size : 64
state count: 8
active state: T0
state available: T0 to T7
>dmesg |grep -i cpu
Initializing cgroup subsys cpuset
PAT disabled. Not yet verified on this CPU type.
ACPI: SSDT 3BDF64B2, 01FB (r1 PmRef CpuPm 3000 INTL 20030224)
SMP: Allowing 1 CPUs, 0 hotplug CPUs
PERCPU: Allocating 41384 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1
CPU 0 irqstacks, hard=c07cb000 soft=c07ab000
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
Intel machine check reporting enabled on CPU#0.
CPU0: Intel(R) Celeron(R) M processor 1.60GHz stepping 08
Brought up 1 CPUs
CPU0 attaching sched-domain:
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
Switched to high resolution mode on CPU 0
cpuidle: using governor ladder
cpuidle: using governor menu