latest selinux policy update errors
by Mark Haney
Is anyone else seeing these types of failures with the latest selinux
updates?
libsemanage.semanage_direct_remove: Module dpkg was not found.
semodule: Failed on dpkg!
error: %trigger(selinux-policy-strict-2.6.4-21.fc7.noarch) scriptlet
failed, exit status 1
libsemanage.semanage_direct_remove: Module dpkg was not found.
semodule: Failed on dpkg!
error: %trigger(selinux-policy-strict-2.6.4-23.fc7.noarch) scriptlet
failed, exit status 1
Should I file a bug report?
--
Da mihi sis bubulae frustrum assae, solana tuberosa in modo gallico
fricta, ac quassum lactatum coagulatum crassum
Mark Haney
Sr. Systems Administrator
ERC Broadband
(828) 350-2415
Call (866) ERC-7110 for after hours support
14 years, 6 months
Trying to install NX
by Jim
Fedora 8 x86_64
Trying to install NX.
I have no problem connecting other i386 boxes.
Error messages below;
This is the output of NXClient on Laptop
NXPROXY - Version 3.1.0
Copyright (C) 2001, 2007 NoMachine.
See http://www.nomachine.com/ for more information.
Info: Proxy running in client mode with pid '17226'.
Session: Starting session at 'Sat Feb 9 15:43:20 2008'.
Info: Connection with remote proxy completed.
Info: Using ADSL link parameters 512/24/1/0.
Info: Using cache parameters 4/4096KB/16384KB/16384KB.
Info: Using pack method 'adaptive-7' with session 'kde'.
Info: Using product 'LFE/None/LFEN/None'.
Info: Using ZLIB data compression 1/1/32.
Info: Using ZLIB stream compression 4/4.
Info: No suitable cache file found.
Info: Forwarding X11 connections to display ':0.0'.
Info: Listening to font server connections on port '11004'.
Session: Session started at 'Sat Feb 9 15:43:20 2008'.
Info: Established X server connection.
Info: Using shared memory parameters 1/4096K.
Error: Connection with remote peer broken.
Error: Please check the state of your network and retry.
Session: Terminating session at 'Sat Feb 9 15:43:24 2008'.
Session: Session terminated at 'Sat Feb 9 15:43:24 2008'.
This is the server box x86_64 /messages file
Feb 9 15:43:10 x86_64 NXSERVER-3.1.0-4[6223]: User 'mickey' logged in from '76.251.280.83'. 'NXLogin::set'
Feb 9 15:43:13 x86_64 NXSERVER-3.1.0-4[6223]: Selected node host:localhost with port:22 'main::selectNode'
Feb 9 15:43:13 x86_64 NXSERVER-3.1.0-4[6223]: Current selected node: localhost is in status: running 'main::selectNode'
Feb 9 15:43:13 x86_64 NXSERVER-3.1.0-4[6223]: Selected session type: unix-kde allowed in the profile of user: mickey 'NXShell::Static'
Feb 9 15:43:15 x86_64 NXSERVER-3.1.0-4[6223]: ERROR: nxssh process exited with '255' 'NXNodeExec::exec'
Feb 9 15:43:19 x86_64 NXSERVER-3.1.0-4[6223]: Session '7F7FA6AC9A8C13F31E8F8EC3BAA37650' started by user 'mickey'. 'NXShell::handler_session_start'
Feb 9 15:43:19 x86_64 NXSERVER-3.1.0-4[6223]: ERROR: run command: no child process with pid 6330 Logger::log nxserver 3069
Feb 9 15:43:19 x86_64 NXSERVER-3.1.0-4[6223]: User 'mickey' from '76.251.280.83' logged out. 'NXLogin::reset'
Feb 9 15:43:19 x86_64 NXNODE-3.1.0-5[6371]: Using port '1004' on node 'x86_64' for session 'unix-kde'. Logger::log nxnode 5975
Feb 9 15:43:19 x86_64 NXNODE-3.1.0-5[6371]: Using host from available host list: '172.16.1.36'. Logger::log nxnode 5976
Feb 9 15:43:20 x86_64 NXNODE-3.1.0-5[6735]: ERROR: Error when monitoring session: Could not open default font 'fixed' 'NXSessionMonitor::__setSessionStatus'
Feb 9 15:43:20 x86_64 NXNODE-3.1.0-5[6735]: NXSessionMonitor: killing unexpected agent running with pid '6653' with signal '15' 'NXSessionMonitor::monitorStatus'
Feb 9 15:43:23 x86_64 NXNODE-3.1.0-5[6735]: NXSessionMonitor: killing unexpected agent running with pid '6653' with signal '15' 'NXSessionMonitor::monitorStatus'
Feb 9 15:43:24 x86_64 NXNODE-3.1.0-5[6735]: NXSessionMonitor: killing unexpected agent running with pid '6653' with signal '9' 'NXSessionMonitor::monitorStatus'
Feb 9 15:43:24 x86_64 NXNODE-3.1.0-5[6371]: ERROR: Unexpected termination of nxagent because of signal: 9 Logger::log nxnode 3777
Feb 9 15:43:24 x86_64 NXNODE-3.1.0-5[6371]: ERROR: run command: process: 6653 died because of signal: 9 Logger::log nxnode 3784
Feb 9 15:43:25 x86_64 NXNODE-3.1.0-5[6735]: Directory '/home/mickey/.nx/C-x86_64-1004-7F7FA6AC9A8C13F31E8F8EC3BAA37650' renamed into '/home/mickey/.nx/F-C-x86_64-1004-7F7FA6AC9A8C13F31E8F8EC3BAA37650' for further investigation Logger::log nxnode 6155
Feb 9 15:43:26 x86_64 NXNODE-3.1.0-5[6371]: Session 'unix-kde' on port '1004' failed. Logger::log nxnode 6234
Feb 9 15:43:32 x86_64 NXSERVER-3.1.0-4[6656]: ERROR: NXNodeExec: Cannot kill nxssh process: No such process 'NXNodeExec::exec'
Feb 9 15:43:32 x86_64 NXSERVER-3.1.0-4[6656]: User 'mickey' from '76.251.280.83' logged out. 'NXLogin::reset'
15 years, 4 months
IcedTea Firefox and SELinux
by Kip Thomas
guys,
help me. I made the link, checked SELinux like i did. I've got the
experience ya know? I've done all this on all F* up to F7
I also learned a new command "alternatives"
nothing helped. "applet not initialized" testing again "google java
tester"....just a blank pink box
info on the new brave, free, iced cool java is scant.
i386 32 bit F8
help the poor soul....ktnx
15 years, 4 months
Turbo Memory
by Claude Jones
I was spec'ing a new laptop tonight, and noticed it had 1 GB of 'Turbo
Memory' -- this is a new Intel specification that uses flash memory to cache
frequently used items and is only available in Windows-land with Vista. It is
not CPU cache nor RAM.
Does anyone know of any work being done to access this new technology in
Linux?
--
Claude Jones
Brunswick, MD, USA
15 years, 5 months
Gallery2 installation, so where is it?
by Chris G
I just did:-
yum install gallery2
It installed with no errors.
The trouble is I now have no clue as to what to do next. What do I
have to do next, I can't see any *obvious* pages to browse to get it
going.
Yes, I do have apache installed and running, and PHP, and mySql.
--
Chris Green
15 years, 5 months
X and Intel 965
by Jeffrey Ross
so far the installation of FC6 has gone relatively smoothly albeit some
additional learning and bumps due to the 64 bit architecture of this
machine.
The mother board is an Intel DG965RYCK which uses Intel's 965 express
chipset. Based upon what I've been able to find on the web, Intel has
released the drivers for this chipset to OSS, although there have been
issues as to what Intel actually released and how complete they might be.
Regardless I unable to run mplayer (or Realplayer) for that matter
without the display first freezing then going black followed by garbage
along the bottom of the screen. A Control-Alt-Backspace does not stop X
from running. The only way to recover the machine from this point is to
reboot the system. I am still able to connect from a remote system, its
just the display that has become unstable.
lspci -v shows the following for the graphics adapter
00:02.0 VGA compatible controller: Intel Corporation Integrated
Graphics Controller (rev 02) (prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 514d
Flags: bus master, fast devsel, latency 0, IRQ 177
Memory at 50200000 (32-bit, non-prefetchable) [size=1M]
Memory at 40000000 (64-bit, prefetchable) [size=256M]
I/O ports at 3110 [size=8]
Capabilities: [90] Message Signalled Interrupts: 64bit-
Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
suggestions would be appreciated.
Thanks
15 years, 6 months
GDMSetup
by Casartello, Thomas
Was gdmsetup removed from Fedora 9? I'm trying to figure out how to
configure gdm.
Thomas E. Casartello, Jr.
Infrastructure Technician
Linux Specialist
Department of Information Technology
Westfield State College
Wilson 105-A
(413) 572-8245
E-Mail: tcasartello(a)wsc.ma.edu
Red Hat Certified Technician (RHCT)
15 years, 6 months
OFF-TOPIC: Fedora 7 already installed, can't install XP on empty partition
by Andre Costa
Hi,
this is somehow off-topic, but hopefully someone here has been through
this already...
I just bought a shiny new Core 2 Duo machine (Intel DG33BU mobo), with
a nice 250G SATA disk. Fedora 7 installation went surprisingly well
(and fast), only problem was that onboard NIC was not recognized, but
upgrading the kernel offline fixed this. Everything is amazingly fast
=)
BUT... I need this machine to dual-boot to Windows XP (still addicted
to some Windows-only games =( ). XP setup CD hangs just after showing
"examining hardware configuration" or something like that. It doesn't
really hangs, it just switches to a blank screen and sits there
forever (I already left it there for more than 15min to no avail).
Keyboard is responsive and HD led stays on. CTRL+ALT+DEL reboots as
expected.
I talked to IT guys at work and they told me they've been through this
already lots of times, it seems XP is unable to properly recognize the
disk when only Linux is installed on it (?!?), and only solution would
be to reformat the whole thing and install XP first.
Is that true?
My system is configured as:
~ fdisk -l /dev/sda
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104391 83 Linux
/dev/sda2 14 10467 83971755 8e Linux LVM
HD specs are:
~ hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG SP2504C
Serial Number: S09QJ1SP208120
Firmware Revision: VT100-50
GRUB is installed on MBR. All remaining space is sitting there,
waiting for XP to take over... =/
Anyone knows of a workaround? Should I try to create an additional
partition on the empty space and format it as VFAT hoping this would
make Windoze less stupid? Or am I doomed to remove all partitions and
start from scratch, starting with XP?
TIA
Andre
15 years, 7 months
couldn't change resolution in Vmware
by Mustafa Qasim
Hello!
I've just installed F9 in my Vmware workstation 6 but I couldn't
change my defualt 800x600 resolution to 1024x768. Is VMware causing this
problem? Any Idea.
--
Regards,
Mustafa Qasim
Lahore, Pakistan
Registered Linux User# 441709.
15 years, 7 months
[F8] Installing Lame
by Dan Thurman
For some reason, I am prevented from installing
lame. I have the livna repository and tried
yum install lame and got:
yum install lame
Loading "priorities" plugin
adobe 100% |=========================| 951 B
00:00
livna 100% |=========================| 2.1 kB
00:00
primary.sqlite.bz2 100% |=========================| 378 kB 00:02
fedora 100% |=========================| 2.1 kB
00:00
kde-redhat-all 100% |=========================| 951 B
00:00
kde-redhat 100% |=========================| 1.1 kB
00:00
dag 100% |=========================| 1.1 kB
00:00
updates 100% |=========================| 2.3 kB
00:00
freshrpms 100% |=========================| 2.1 kB
00:00
131 packages excluded due to repository priority protections
Setting up Install Process
Parsing package install arguments
Resolving Dependencies
--> Running transaction check
---> Package lame.i386 0:3.97-6.lvn8 set to be updated
--> Processing Dependency: lame-libs = 3.97-6.lvn8 for package: lame
--> Running transaction check
---> Package lame-libs.i386 0:3.97-6.lvn8 set to be updated
--> Finished Dependency Resolution
Dependencies Resolved
=============================================================================
Package Arch Version Repository
Size
=============================================================================
Installing:
lame i386 3.97-6.lvn8 livna
133 k
Installing for dependencies:
lame-libs i386 3.97-6.lvn8 livna
327 k
Transaction Summary
=============================================================================
Install 2 Package(s)
Update 0 Package(s)
Remove 0 Package(s)
Total download size: 460 k
Is this ok [y/N]: y
Downloading Packages:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Check Error:
file /usr/lib/libmp3lame.so.0.0.0 from install of
lame-libs-3.97-6.lvn8.i386 conflicts with file from package
libmp3lame0-3.97-16.fc8.i386
Error Summary
-------------
So what can I do to get lame installed?
Thanks,
Dan
15 years, 8 months
