Domain of sender address ... does not resolve
by Bill Davidsen
I just did a new FC9 (fully updated) install, and it regularly rejects outgoing
mail with the subject error message. The address does resolve, of course, so I'm
not sure what it means instead of what it says.
The nameservers in /etc/resolv.conf are the authoritative DNS for the domain,
both are up, etc.
Someone have a clue?
--
Bill Davidsen <davidsen(a)tmr.com>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot
12 years, 9 months
Re: [ale] [SOLVED] Unable to Run Citrix x86_64, missing libXaw.so.7
by Marc Ferguson
On Mon, Jan 26, 2009 at 4:19 PM, Jim Kinney <jim.kinney(a)gmail.com> wrote:
> The 32/64 bit dual lib shuffle. I have found that most closed-source,
> commercial products are barely usable on 64-bit Linux because of the
> hard coded lib needs. Sometimes a symlink to the 64-bit lib works.
> Sometimes it causes a crash.
>
> yum install libXaw.i386 works if the base/updates.repo is tweaked to
> include an additional i386 arch. Basically block copy the original one
> and replace $arch with i386 in the block.
>
> 2009/1/26 Marc Ferguson <marcferguson(a)gmail.com>:
> > Hi,
> >
> > I'm running Fedora 10 x86_64 and I'm trying to run Citrix Presentation
> > server Clients for UNIX Version 10.x. When I try to run it, it basically
> > says I'm missing libXaw.so.7. I found the solution, but I wanted to post
> > this for reference. Basically you need to install libXaw.i386 even
> though
> > libXaw.x86_64 is present.
> >
> > [marc@unicron ICAClient]$ ldd wfica
> > linux-gate.so.1 => (0x00110000)
> > libXaw.so.7 => not found
> > libXt.so.6 => /usr/lib/libXt.so.6 (0x0012a000)
> > libX11.so.6 => /usr/lib/libX11.so.6 (0x06b6e000)
> > libdl.so.2 => /lib/libdl.so.2 (0x0036f000)
> > libpthread.so.0 => /lib/libpthread.so.0 (0x00376000)
> > libc.so.6 => /lib/libc.so.6 (0x001f9000)
> > libXext.so.6 => /usr/lib/libXext.so.6 (0x00184000)
> > libSM.so.6 => /usr/lib/libSM.so.6 (0x00df5000)
> > libICE.so.6 => /usr/lib/libICE.so.6 (0x00546000)
> > libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0x001b0000)
> > libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00b2a000)
> > /lib/ld-linux.so.2 (0x001d4000)
> > libXau.so.6 => /usr/lib/libXau.so.6 (0x00195000)
> > libuuid.so.1 => /lib/libuuid.so.1 (0x00540000)
> > libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x001b9000)
> >
> > I then do a search to see if I have this library installed.
> >
> > [marc@unicron ICAClient]$ sudo yum install libXaw
> > Loaded plugins: refresh-packagekit
> > Setting up Install Process
> > Parsing package install arguments
> > Package libXaw-1.0.4-3.fc10.x86_64 already installed and latest version
> > Nothing to do
> >
> >
> > --
> > Marc F.
> >
> > www.fergytech.com
> > Registered Linux User: #410978
> >
> > "When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
> >
> > _______________________________________________
> > Ale mailing list
> > Ale(a)ale.org
> > http://mail.ale.org/mailman/listinfo/ale
> >
> >
>
>
>
> --
> --
> James P. Kinney III
> _______________________________________________
> Ale mailing list
> Ale(a)ale.org
> http://mail.ale.org/mailman/listinfo/ale
>
I may have spoken too soon. Interesting issue though. By installing the
correct i386 library I was able to run the Citrix client via my web browser
- I am unable though to run the client by itself. If I run
/usr/lib/ICAClient/wfcmgr - I get this error:
*/usr/lib/ICAClient/wfcmgr: error while loading shared libraries:
libXm.so.3: cannot open shared object file: No such file or directory*
So after some poking around, I found that OpenMotif is supposed to have
libXm.so.3 library. I install both i386 and x86_64 packages from
ftp://ftp.ics.com/openmotif/2.3/2.3.1/, which I got that link directly from
http://www.motifzone.net/.
I tried to run it after that and got the same error. So; I uninstalled then
reinstalled the Citrix client, but I'm still getting the same issue. I've
tried 4 different version of openmotif and I'm still getting the same error.
*openmotif-2.2.3-2.i386.rpm
openmotif-devel-2.2.3-2.i386.rpm
openmotif-2.2.4-0.1.i386.rpm
openmotif-devel-2.2.4-0.1.i386.rpm
openmotif-2.3.1-1.fc9.i386.rpm
openmotif-devel-2.3.1-1.fc9.i386.rpm
openmotif-2.3.1-1.fc9.x86_64.rpm
openmotif-devel-2.3.1-1.fc9.x86_64.rpm*
Please help me understand this library issue. Thanks.
--
Marc F.
www.fergytech.com
Registered Linux User: #410978
"When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
12 years, 10 months
FC10 and freeNX
by Jim
Has anyone installed freeNX Server on FC10, how did it go ? I'am aware
that you have to install xorg-x11-fonts-misc in FC10.
Please no guesses from those who have installed it in FC 7, 8 , it has a
different set of problems in FC10 .
I have installed it in every FC since FC6.
13 years
Unable to login after latest FC10 updates (i386 on Dell GX270)
by Al Dunsmuir
I'm running FC10 on 3 systems - 2x 32-bit (DELL GX260, D810 laptop)
and 1x 64-bit (AMD quad).
After applying all the recent updates, the D810 and AMD box are fine.
Unfortunately, on the GX260 I can no longer log on - the Gnome logon
panel appears to have all buttons in the bottom row and my user ID
button displayed (low intensity) and inactive.
This is my DNS, DHCP and Samba server, and these services continue to
work in the background. Recommendations as to the appropriate bugzilla
component for reporting the problem, and any first-pass problem
resolution advice would be appreciated. I've checked the mailing list,
but nothing popped up as relevant.
Al
13 years
syslog is filling up because of pulseaudio. HELP!
by Steven W. Orr
I'm getting two of these per second. How can I stop it!
Jan 26 11:21:00 saturn pulseaudio[4130]: module-alsa-sink.c: ALSA woke us
up to write new data to the device, but there was actually nothing to
write! Most likely this is an ALSA driver bug. Please report this issue to
the PulseAudio developers.
My messages files are ginormous:
[root@saturn log]# ls -l messages*
-rw------- 1 root root 776571882 Jan 26 11:22 messages
-rw------- 1 root root 5852717 Jan 4 04:03 messages-20090104
-rw------- 1 root root 5879548 Jan 11 04:03 messages-20090111
-rw------- 1 root root 235939198 Jan 18 04:05 messages-20090118
-rw------- 1 root root 609249323 Jan 25 04:30 messages-20090125
Did some upgrade do this to me? :-(
--
Time flies like the wind. Fruit flies like a banana. Stranger things have .0.
happened but none stranger than this. Does your driver's license say Organ ..0
Donor?Black holes are where God divided by zero. Listen to me! We are all- 000
individuals! What if this weren't a hypothetical question?
steveo at syslang.net
13 years, 1 month
F10 and vlc
by Joseph L. Casale
Wow,
out of the loop (I skipped F9), I have vlc and gstreamer-bad/ugly installed.
Totem plays mp3's and xvids fine, but vlc is choppy as heck. Given that totem
is not exactly what I would prefer to use, how does one fix vlc?
Thanks!
jlc
13 years, 1 month
application to suck up RSS to local storage?
by Peter Teoh
I know thunderbird can be used to view RSS news feed, but, like IMAP,
the content is not stored locally, and thus viewing the pages are
slow.
Is there any application in Redhat which I can use to download RSS
newsfeed, so that I can view it locally without much latency delays?
--
Regards,
Peter Teoh
13 years, 1 month
F10: KDE and second display not working
by Tarjei Knapstad
I'm running a two-display setup with my laptop (Dell Precision M65) as
screen 0 and a second LCD screen as screen 1 (through the proprietary
nvidia drivers).
This works perfectly fine in gnome. If I log in with KDE I get a
desktop, toolbars etc. on Screen 0, but only the desktop background on
Screen 1 (no icons, no toolbar, no menu when right-clicking). I had
the same problem in F9, where I just gave up and started using Gnome.
Has anyone experienced anything similar/have any tips on how to fix
this? I'd really like to go back to KDE soon :)
This is with a fully updated F10 install in addition to:
kmod-nvidia-177.82-1.fc10.4.i686
kmod-nvidia-2.6.27.5-117.fc10.i686-177.82-1.fc10.4.i686
xorg-x11-drv-nvidia-177.82-1.fc10.i386
xorg-x11-drv-nvidia-libs-177.82-1.fc10.i386
Thanks,
--
Tarjei
13 years, 1 month
Gimp Gap?
by Dan Thurman
[OFF TOPIC]: Gimp
I was reading Gimp on Gimp's website and
discovered that there was something called
Gap. It was not clear to me if this was
already built in, is a plugin, or a separate
application to be downloaded and installed.
If Gap is already built-in, how does one
invoke it?
Thanks!
Dan
13 years, 1 month
