How to delete a printer if cups server is down?
by Paulo Cavalcanti
Hi,
how can I delete a printer if its cups server is down?
This is specially annoying with laptops, which may
have several printers visible in system-config-printer,
but none of them will be ever used again.
I tried deleting /var/cache/cups/remote.cache,
but it is always created again, with all the unusable printers in there.
This is a Fedora 10.
Thanks.
--
Paulo Roma Cavalcanti
LCG - UFRJ
14 years, 9 months
Preupgrade F10 to F11: Installer boot fails in GRUB
by Robert Nichols
Running preupgrade in F10, all packages are downloaded successfully, and I click
on the "Reboot now" button. When the system reboots, I select the "Upgrade to
Fedora 11 (Leonidas)" entry from the GRUB menu and get an immediate "Error 15:
File not found" failure from GRUB.
Everything is on one partition (no separate /boot partition).
In /boot/grub/grub.conf:
default=1
timeout=10
splashimage=(hd0,6)/boot/grub/splash.xpm.gz
#hiddenmenu
title Upgrade to Fedora 11 (Leonidas)
kernel /boot/upgrade/vmlinuz preupgrade repo=hd::/var/cache/yum/preupgrade
stage2=hd:UUID=d137c2a7-7913-42ed-87b0-6b3fac3ec768:/boot/upgrade/install.img
ks=hd:UUID=d137c2a7-7913-42ed-87b0-6b3fac3ec768:/boot/upgrade/ks.cfg
initrd /boot/upgrade/initrd.img
The filesystem has the matching UUID:
# tune2fs -l /dev/sda7 | grep UUID
Filesystem UUID: d137c2a7-7913-42ed-87b0-6b3fac3ec768
In /boot/upgrade:
total used in directory 134984 available 62504828
drwxr-xr-x 2 root root 4096 2009-06-24 14:54 .
drwxr-xr-x 5 root root 4096 2009-06-24 14:53 ..
-rw-r--r-- 1 root root 18985802 2009-06-02 17:02 initrd.img
-rw-r--r-- 1 root root 116039680 2009-06-02 17:04 install.img
-rw-r--r-- 1 root root 276 2009-06-24 14:54 ks.cfg
-rw-r--r-- 1 root root 3035056 2009-06-02 17:02 vmlinuz
I have no idea what file GRUB is complaining it can't find. (Don't you just
love error messages like that?)
--
Bob Nichols "NOSPAM" is really part of my email addressw.
Do NOT delete it.
14 years, 9 months
Broadcom BCM43XX Nightmarte on F11
by Christopher A Williams
I have a couple of laptops I've been working on that I have not been
able to get WiFi to come up on at all.
Both of them have the Broadcom BC43XX series adapters. One of them is a
Gateway MX6030 laptop equipped with a Broadcom BCM4318 adapter and the
other is a Dell Inspiron e1705 with a BCM4311 adapter.
In each case, the default F11 B43 drivers simply don't work at all. I
also have tried the kmod-wl / broadcom-wl drivers from RPM Fusion. No
Dice.
This is really starting to irritate me!!!! It's almost to the point that
I'm ready to rip these adapters out of these machines and replace them
with Intel ones if I can find some that will fit.
What needs to happen to have Broadcom's goofy hardware to behave and
actually work using F11?
--
=============================
"You see things as they are and ask, 'Why?'
I dream things as they never were and ask, 'Why not?'"
-- George Bernard Shaw
14 years, 9 months
Some issues in F11
by Bradley
Hello, everyone.
Well, I finally got myself in a position where I could finally update
from F8 to F11 - much to the complaining of another family member.
Since I wanted to reorganize my file system structure, I decided to just
back it up and do a fresh install of F11 (and from the looks of things,
I'm glad I did). For the most part, after using it a couple of days, it
seems to run okay with a few nuisances that I wanted to verify if anyone
else is having the same issues or if there is a setting somewhere I'm
not aware of.
- On varying software packages, occasionally (actually rarely) when I
click on an icon or menu option I get a different menu or option than
what I selected even though the display indicated that I successfully
selected what I wanted.
- Upon installation, the system was unable to determine what type of
monitor was available and doesn't give me the option to manually select
the monitor's type or capabilities. Since the xorg.conf file is not
used in F11, I can't simply edit it with the display mode to use and
when I create a new one it refuses to use the display settings I put in
therby not taking advantage of the full capabilities of my monitor.
- When attempting to select multiple files & folder in Nautilus, instead
of selecting the folders, it will not select them but expands them (and
their contents) until after I have selected a few other files / folders
first. - Sounds like a bug to me.
- I can no longer play MP3 files with Rythymbox and in Nautilus (audio
preview) by default in F11 where it could in F8! (This is a major issue
with my family)
I am sure more issues will be posted later as I recognize them but if
someone could offer suggestions, it would be helpful.
Bradley
14 years, 9 months
F11 - unrant
by Aaron Konstam
What I hate about going to a new version of Fedora is configuring all
the media handling software.
Well on my machine in F11 it was a breeze. I am running youtube videos,
playing npr programs (which used to give me headaches) and have gotten
CNN videos to work which used to be very difficult. I was amazed.
Good job to the developers.
14 years, 9 months
F10 -> F11 using preupgrade
by Peter J. Stieber
I have a Dell Power Edge 1435SC that is running F10. I followed the
preupgrade procedure on
http://fedoraproject.org/wiki/How_to_use_PreUpgrade
When the machine rebooted it asked me to select the Ethernet connection
to update over using the NetworkManager. I couldn't get this to work.
On a positive note, when I rebooted the machine, F10 still worked. I
was not using the NetworkManager with F10...
$ chkconfig | grep etw
NetworkManager 0:off 1:off 2:off 3:off 4:off 5:off 6:off
network 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Is there a way around this?
TIA,
Pete
14 years, 9 months
Fedora 11 UTF-8 and fonts (clearcase and citrix ICAClient, and maybe motif in general?)
by Andy Wang
Hi all,
I posted this on fedoraforum.org when I was testing the preview F11
and just did again to see if anyone using F11 release has any ideas,
but I thought I'd try the mailing list as well:
*** post from fedora forum ***
The Citrix ICAClient and clearcase gui tools don't launch properly. I
get the following:
Warning:
Name: FONTLIST_DEFAULT_TAG_STRING
Class: XmRendition
Conversion failed. Cannot load font.
on the console in a nice steady stream. Citrix's wfica just fails to
launch, and the wfcmgr is missing all fonts. Clearcase gui tools
complains that it's unable to create a text drawing font set and the
tools exit.
I can workaround the problem two ways, one LANG=C instead of
en_US.UTF-8 or removing the cjk fonts, specifically, the following two
packages:
cjkuni-uming-fonts-0.2.20080216.1-23.fc11.noarch
cjkuni-fonts-common-0.2.20080216.1-23.fc11.noarch
Any ideas on other solutions for this problem?
*** end post from fedora forum ***
Does anyone have any thoughts about this, the clearcase gui tools and
ICAClient are the only two motif applications I have readily available
to test (wish those would just move off motif, but I'm doubting that
IBM will do anythign with clearcase anytime remotely soon).
Just looking for general ideas on how to troubleshoot this. I don't
understand font loading anymore, especially with the UTF-8 encoding
stuff, so I don't know why LANG=C would actually allow this to work.
Can anyone provide a short primer on how that works, or let me know
what's a good tool to try to debug font loading and find out what
fonts it either can't load, or can't find?
Thanks,
Andy
14 years, 9 months
Re: [ale] [SOLVED] Unable to Run Citrix x86_64, missing libXaw.so.7
by Marc Ferguson
On Mon, Jan 26, 2009 at 4:19 PM, Jim Kinney <jim.kinney(a)gmail.com> wrote:
> The 32/64 bit dual lib shuffle. I have found that most closed-source,
> commercial products are barely usable on 64-bit Linux because of the
> hard coded lib needs. Sometimes a symlink to the 64-bit lib works.
> Sometimes it causes a crash.
>
> yum install libXaw.i386 works if the base/updates.repo is tweaked to
> include an additional i386 arch. Basically block copy the original one
> and replace $arch with i386 in the block.
>
> 2009/1/26 Marc Ferguson <marcferguson(a)gmail.com>:
> > Hi,
> >
> > I'm running Fedora 10 x86_64 and I'm trying to run Citrix Presentation
> > server Clients for UNIX Version 10.x. When I try to run it, it basically
> > says I'm missing libXaw.so.7. I found the solution, but I wanted to post
> > this for reference. Basically you need to install libXaw.i386 even
> though
> > libXaw.x86_64 is present.
> >
> > [marc@unicron ICAClient]$ ldd wfica
> > linux-gate.so.1 => (0x00110000)
> > libXaw.so.7 => not found
> > libXt.so.6 => /usr/lib/libXt.so.6 (0x0012a000)
> > libX11.so.6 => /usr/lib/libX11.so.6 (0x06b6e000)
> > libdl.so.2 => /lib/libdl.so.2 (0x0036f000)
> > libpthread.so.0 => /lib/libpthread.so.0 (0x00376000)
> > libc.so.6 => /lib/libc.so.6 (0x001f9000)
> > libXext.so.6 => /usr/lib/libXext.so.6 (0x00184000)
> > libSM.so.6 => /usr/lib/libSM.so.6 (0x00df5000)
> > libICE.so.6 => /usr/lib/libICE.so.6 (0x00546000)
> > libxcb-xlib.so.0 => /usr/lib/libxcb-xlib.so.0 (0x001b0000)
> > libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00b2a000)
> > /lib/ld-linux.so.2 (0x001d4000)
> > libXau.so.6 => /usr/lib/libXau.so.6 (0x00195000)
> > libuuid.so.1 => /lib/libuuid.so.1 (0x00540000)
> > libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x001b9000)
> >
> > I then do a search to see if I have this library installed.
> >
> > [marc@unicron ICAClient]$ sudo yum install libXaw
> > Loaded plugins: refresh-packagekit
> > Setting up Install Process
> > Parsing package install arguments
> > Package libXaw-1.0.4-3.fc10.x86_64 already installed and latest version
> > Nothing to do
> >
> >
> > --
> > Marc F.
> >
> > www.fergytech.com
> > Registered Linux User: #410978
> >
> > "When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
> >
> > _______________________________________________
> > Ale mailing list
> > Ale(a)ale.org
> > http://mail.ale.org/mailman/listinfo/ale
> >
> >
>
>
>
> --
> --
> James P. Kinney III
> _______________________________________________
> Ale mailing list
> Ale(a)ale.org
> http://mail.ale.org/mailman/listinfo/ale
>
I may have spoken too soon. Interesting issue though. By installing the
correct i386 library I was able to run the Citrix client via my web browser
- I am unable though to run the client by itself. If I run
/usr/lib/ICAClient/wfcmgr - I get this error:
*/usr/lib/ICAClient/wfcmgr: error while loading shared libraries:
libXm.so.3: cannot open shared object file: No such file or directory*
So after some poking around, I found that OpenMotif is supposed to have
libXm.so.3 library. I install both i386 and x86_64 packages from
ftp://ftp.ics.com/openmotif/2.3/2.3.1/, which I got that link directly from
http://www.motifzone.net/.
I tried to run it after that and got the same error. So; I uninstalled then
reinstalled the Citrix client, but I'm still getting the same issue. I've
tried 4 different version of openmotif and I'm still getting the same error.
*openmotif-2.2.3-2.i386.rpm
openmotif-devel-2.2.3-2.i386.rpm
openmotif-2.2.4-0.1.i386.rpm
openmotif-devel-2.2.4-0.1.i386.rpm
openmotif-2.3.1-1.fc9.i386.rpm
openmotif-devel-2.3.1-1.fc9.i386.rpm
openmotif-2.3.1-1.fc9.x86_64.rpm
openmotif-devel-2.3.1-1.fc9.x86_64.rpm*
Please help me understand this library issue. Thanks.
--
Marc F.
www.fergytech.com
Registered Linux User: #410978
"When life gives me lemons... I make Linuxaide, hmm good stuff!" -Marc F.
14 years, 9 months
older releases
by mattias
where to get older fedora-releases e.g 5 4 3 etc
14 years, 9 months
