Alpine will not show attachments
by Tom Diehl
Hi,
I am running alpine-2.00-1.fc10.x86_64 on an F10 box. If I get a message with
an html or file attachment and I try to open it, I get an error that
"Firefox can't find the file at /tmp/img--46112.htm" The correct program opens
up but I always get the can't find file errors. If the message contains a URL
then it comes up and displays properly.
Does anyone know how to troubleshoot this problem?
Regards,
--
Tom Diehl tdiehl(a)rogueind.com Spamtrap address mtd123(a)rogueind.com
12 years, 12 months
Upgrading : give me strength ...
by Beartooth
I've tried all the tricks on this list a/o the troubleshooting
site, over and over. I finally gave up : downloaded and burned a DVD --
and *still* hit the catch-22 error, with too little space in mnt/sysimage/
boot.
Now what?
Can I simply delete all of /boot, or everything in it? All of
grub.conf? Or what? It's going to be a royal pain if I have to burn all
my data to media, and then sneakermail that back onto each machine,
instead of just upgrading f11 ....
--
Beartooth Staffwright, Neo-Redneck Not Quite Clueless Power User
I have precious (very precious!) little idea where up is.
13 years, 4 months
Enabling Airport wireless on Macbook Air with F12
by Colin Paul Adams
Thanks to Chris Smart, Peter Danenberg and others, I have been able to
install Fedora 12 as the sole O/S on my Macbook Air (first
generation).
However the wirless networking is not enabled.
I am following the instructions in
http://docs.fedoraproject.org/wireless-guide/f12/en-US/html-single/#chap-... .
There was no wireless device shown in the network Configuration, so I
clicked New and added a device for hardware Apple Airport.
I also tried adding wireless device on the Hardware tab (eth0), but although
it allows me to do this, after I save and then reopen the Network
Configuration, the hardware only shows a device pan0 of Type Ethernet
(which was there from the start). It does appear on the Devices tab
(it didn't originally until I added it), but has staus of inactive,
and no means to activate it.
However, even after restarting the computer, the wireless icon on the
panel says there are no network devices available.
So I tried removing the device from control by NetworkManager, and
activated it manually. But then I get:
Device eth0 does seem to be present, delaying initalization.
What do I need to do?
--
Colin Adams
Preston Lancashire
13 years, 7 months
Kernel boot problems or is my hard drive failing ?
by linux guy
If I power down my laptop via the usual KStart->Shutdown means, it can
take up to 4 restart attempts before it fully boots.
It has no problem launching grub and the kernel selection screen. That
it does reliably every time. After that, there are issues.
Twice I will get a back screen with a flashing cursor. Then I will get
an ehci -19 error. Then it will boot properly.
My fscks are fine. I had a block error once, about two weeks ago, but
that was with an older F12 kernel after completely crashing during a
resume from suspend to RAM.
Is anyone else experiencing a problem booting ? Does this sound like a
kernel problem or is my hard drive failing ?
Thanks
$ uname -a
Linux localhost.localdomain 2.6.31.9-174.fc12.i686.PAE #1 SMP Mon Dec 21
06:04:56 UTC 2009 i686 i686 i386 GNU/Linux
13 years, 9 months
Vinagre???
by Antonio M
I have two boxes, both have UltraVNC and Vinagre (Remote desktop
viewer), exactly the same packages both in F11 fully updated
When I connect from A to B both Vinagre and UltraVNC work, but when I
connect from Ato B UltraVNC works fine but in Vinagre I see the list
of remote desktops, but when I try to connect I get the message
Connection closed: The connection to host B has been closed.
Any idea??
Tnx
--
Antonio Montagnani
Skype : antoniomontag
SIP: antoniomontag(a)ekiga.net
13 years, 10 months
assertion in NetworkManager
by Philipp Böhm
Hello @all,
after upgrading to Fedora 12 I get some problems with NetworkManager for
example Wireless Networks were disabled and you couldn't avtivate this.
Some entries in /var/log/messages shows me an assertion in
NetworkManager. I will post these line and I hope that somebody can help
me. My wireless-device is an Atheros AR242x 802.11abg Wireless PCI
Express Adapter (wlan0).
/var/log/messages:
Nov 22 11:00:18 philipps-toshi NetworkManager: <info> Wireless now
enabled by radio killswitch
Nov 22 11:00:18 philipps-toshi rpc.statd[1270]: Version 1.2.1 Starting
Nov 22 11:00:19 philipps-toshi NetworkManager: ifcfg-rh: parsing
/etc/sysconfig/network-scripts/ifcfg-wlan0 ...
Nov 22 11:00:19 philipps-toshi NetworkManager: ifcfg-rh: error:
Missing SSID
Nov 22 11:00:19 philipps-toshi NetworkManager: ifcfg-rh: parsing
/etc/sysconfig/network-scripts/ifcfg-eth0 ...
Nov 22 11:00:19 philipps-toshi NetworkManager: ifcfg-rh: read
connection 'System eth0'
Nov 22 11:00:19 philipps-toshi NetworkManager: ifcfg-rh: parsing
/etc/sysconfig/network-scripts/ifcfg-lo ...
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): driver
supports SSID scans (scan_capa 0x01).
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): new
802.11 WiFi device (driver: 'ath5k')
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): exported
as /org/freedesktop/NetworkManager/Devices/0
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): now managed
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): device
state change: 1 -> 2 (reason 2)
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0): bringing
up device.
Nov 22 11:00:19 philipps-toshi kernel: ADDRCONF(NETDEV_UP): wlan0: link
is not ready
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0):
preparing device.
Nov 22 11:00:19 philipps-toshi NetworkManager: <info> (wlan0):
deactivating device (reason: 2).
Nov 22 11:00:19 philipps-toshi NetworkManager:
supplicant_interface_acquire: assertion `mgr_state ==
NM_SUPPLICANT_MANAGER_STATE_IDLE' failed
13 years, 10 months
Fedora 11 GDM - unwanted list of all local users and impossible to customize?
by jaivuk
Hello guys,
I did not use gdm for some time and now I'm not happy how it looks in Fedora
11.
First of all - the list of local users is unacceptable from security
reasons. Even if it supports such "an " option - how it can be the default
one?!
Second problem I have is shutdown button (and possibly restart as well) -
when you click on shutdown button by mistake, system will shut - there is no
confirmation dialog.
I also tried to find some ways how to customize gdm in Fedora 11 but I did
not find any usable guide.
Can anybody please advise me how can I have prompt asking for username only
(showing last logged user at maximum) and not displaying the list of all
local users?
Also can I somehow add confirmation or remove shutdown restart buttons from
gdm screen?
Or can you please advise any alternative to gdm?
Thank you very much,
Jan
13 years, 11 months
Rendering chart from bootchart
by Suvayu Ali
Hi everyone,
I have been seeing very long boot times for the last few months so I ran
bootchart. But I can't render the chart after booting. The web interface
seems to be down. And the java application supplied with bootchart
generates the following error.
> $ java -jar /usr/share/java/bootchart.jar
> Exception in thread "main" java.lang.NoClassDefFoundError: org/apache/commons/cli/ParseException
> Caused by: java.lang.ClassNotFoundException: org.apache.commons.cli.ParseException
> at java.net.URLClassLoader$1.run(URLClassLoader.java:217)
> at java.security.AccessController.doPrivileged(Native Method)
> at java.net.URLClassLoader.findClass(URLClassLoader.java:205)
> at java.lang.ClassLoader.loadClass(ClassLoader.java:319)
> at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:294)
> at java.lang.ClassLoader.loadClass(ClassLoader.java:264)
> at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:332)
> Could not find the main class: org.bootchart.Main. Program will exit.
I have the Java Development Kit files installed:
> $ rpm -qa *openjdk*
> java-1.6.0-openjdk-1.6.0.0-30.b16.fc11.x86_64
> java-1.6.0-openjdk-devel-1.6.0.0-30.b16.fc11.x86_64
> java-1.6.0-openjdk-plugin-1.6.0.0-30.b16.fc11.x86_64
What seems to be wrong?
--
Suvayu
Open source is the future. It sets us free.
13 years, 11 months