internet access
by terry
On 04/30/2010 08:33 PM, users-request(a)lists.fedoraproject.org wrote:
> essage: 14
> Date: Fri, 30 Apr 2010 19:09:06 -0500
> From: Larry Brower<larry(a)maxqe.com>
> Subject: Re: internet access
> To: Community support for Fedora users<users(a)lists.fedoraproject.org>
> Message-ID:<4BDB7122.8040807(a)maxqe.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> terry wrote:
>
>> > Hello,
>> > When I start the next day, after shutting off the computer, I must
>> > turn on eth0 each time after reboot or start up in AM. Could SE
>> > Linux be doing this or is it something else in some start up script?
>> > everything that I use works okay except for the aforementioned problem.
>> > The computer is hard wired to a Cisco wireless router then to a modem.
>>
> Have you made sure that eth0 is set to start on boot?
>
> By "I must turn on eth0" are you referring to ifup eth0 or something
> like service network start ?
> > If I knew the answers to these two questions, I wouldn't be writing.
> Can you provide the contents of
> /etc/sysconfig/network-scripts/ifcfg-eth0 ?
>
>
>
> > I checked this file and 'on boot = no' was set I changed it to yes
Thank you
13 years, 12 months
- 1
- 0
Sound Problems FC12
by Jim
Fc12-X86_64/KDE
No sound at all.
Pulseaudio volume is set to 100% , alsamixer is set to 80% and in System
Settings > Multimedia it shows Dummy for devices, no sound using "test"
I have a Ensoniq ens-1371 and it has a driver snd-ens1371 the module is
being loaded at boot time.
See below.
Where is the system-config-soundcard package for Fedora 12.
Sound worked perfect in Fedora 11 , did upgrade to Fedora 12 and no sound.
Module Size Used by
lp 6794 0
sunrpc 160138 1
p4_clockmod 3003 0
ip6t_REJECT 3394 2
nf_conntrack_ipv6 14859 2
ip6table_filter 2227 1
ip6_tables 9409 1 ip6table_filter
ipv6 223810 38 ip6t_REJECT,nf_conntrack_ipv6
uinput 5244 0
snd_ens1371 16151 0
gameport 7557 1 snd_ens1371
snd_rawmidi 16314 1 snd_ens1371
snd_ac97_codec 89540 1 snd_ens1371
ac97_bus 902 1 snd_ac97_codec
snd_seq 42811 0
snd_seq_device 5031 2 snd_rawmidi,snd_seq
snd_pcm 60772 2 snd_ens1371,snd_ac97_codec
snd_timer 15541 2 snd_seq,snd_pcm
ppdev 6529 0
snd 46576 7
snd_ens1371,snd_rawmidi,snd_ac97_codec,snd_seq,snd_seq_device,snd_pcm,snd_timer
parport_pc 17509 1
soundcore 4863 1 snd
dcdbas 6596 0
parport 27256 3 lp,ppdev,parport_pc
snd_page_alloc 6061 1 snd_pcm
nvidia 9921635 38
tulip 37886 0
i2c_i801 8337 0
i2c_core 21732 2 nvidia,i2c_i801
iTCO_wdt 7850 0
iTCO_vendor_support 2023 1 iTCO_wdt
dm_multipath 12324 0
floppy 45110 0
13 years, 12 months
- 3
- 5
Ending in bin
by terry
I d/l adobe reader 9. the file comes with an ending of '.bin'. I get
the feeling yum nor rpm will for. If I am incorrect, how do they work.
If not, what make the file come apart.
Thank you
13 years, 12 months
- 2
- 1
Ending in bin
by terry
I d/l adobe reader he file comes with an ending of '.bin'. I get the
feeling yum nor rpm will not work. If I am incorrect, how do they work.
If not, what make the file come apart.
Thank you
13 years, 12 months
- 3
- 2
internet access
by terry
Hello,
When I start the next day, after shutting off the computer, I must
turn on eth0 each time after reboot or start up in AM. Could SE
Linux be doing this or is it something else in some start up script?
everything that I use works okay except for the aforementioned problem.
The computer is hard wired to a Cisco wireless router then to a modem.
13 years, 12 months
- 4
- 3