Well-hidden yum feature in fc17
by Bill Davidsen
I noted that my upgrade of fc17 was running very slowly this morning. I was
getting only about 65-68kB download, and things were pretty slow. Since this is
a regular thing, I checked a few things, and found out that the upgrade was
going over IPv6! It was slow because my connection with a 2nd ISP for IPv6 was
for testing, and is only 768kb right now.
It looks as if yum chooses IPv6 sources when available, over IPv4. Who knew?
Yes, I confirmed with wireshark, really was using v6 for everything but
rpmfusion updates.
--
Bill Davidsen <davidsen(a)tmr.com>
We are not out of the woods yet, but we know the direction and have
taken the first step. The steps are many, but finite in number, and if
we persevere we will reach our destination. -me, 2010
11 years, 9 months
[OT] Custom 'wrote' lines
by Mark Haney
Okay, I gotta ask. Where on earth do you get the customized lines like
this:
Once upon a time, Bob Goodwin - Zuni, Virginia, USA
<bobgoodwin(a)wildblue.net> said:
(Thanks Bob. Give credit where it's due.)
I've seen various and sundry others like this one, and I can't really
google it since I don't have a clue what to call that.
--
Mark Haney
Software Developer/Consultant
AB Emblem
markh(a)abemblem.com
Linux marius.homelinux 3.4.2-1.fc16.x86_64 GNU/Linux
11 years, 9 months
Upgrade vs Install: request for recommendations (trick questions, sort of)
by Max Pyziur
Greetings,
I'm going through the recent release cycles of both Fedora and CentOS in
upgrading machines.
I've had to do a fresh install on a machine where the available /boot
partition size of 200MB was not adequate. Consequently, I created a /boot
partition of 1GB and did a fresh install. (This was for moving from
F15->F16; I then successfully upgraded to F17.)
The issue for me was matching the installation to what I had previously.
My approach was to store a list of rpms (rpm -qa > F15RpmList.txt) and
then sdiff -s to a list of F16 Rpms.
Is there a more efficient procedure than this?
Much thanks.
Max Pyziur
pyz(a)brama.com
11 years, 9 months
Help needed for NFS behind a firewall on F17
by Jouk Jansen
Hi all,
I'm running a NFS-server on a F17 system. Normally I set it to use fixed
ports by inserting (as the system-config-nfs tool does) the following lines
in /etc/sysconf/nfs :
LOCKD_TCPPORT=4000
STAD_PORT=4002
RQUOTAD_PORT=4003
LOCKD_UDPPORT=4000
MOUNTD_PORT=4003
After restarting nfs I check the ports used with "rpcinfo -p"
It appears that only lockd is running on the specified port (4000), the
other not.
What am I not doing correct?
How do I get the other nfs-services use ports 4001-4003?
Jouk
Pax, vel iniusta, utilior est quam iustissimum bellum.
(free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.)
Epistularum ad Atticum 7.1.4.3)
>------------------------------------------------------------------------------<
Jouk Jansen
joukj(a)hrem.nano.tudelft.nl
Technische Universiteit Delft tttttttttt uu uu ddddddd
Kavli Institute of Nanoscience tttttttttt uu uu dd dd
Nationaal centrum voor HREM tt uu uu dd dd
Lorentzweg 1 tt uu uu dd dd
2628 CJ Delft tt uu uu dd dd
Nederland tt uu uu dd dd
tel. 31-15-2782272 tt uuuuuuu ddddddd
>------------------------------------------------------------------------------<
11 years, 9 months
Re: F16 rocks. Thanks.
by Lee
>
> On 06/27/2012 04:02 PM, Hiisi wrote:
>>
>> On 27 June 2012 20:05, linux guy <linuxguy123(a)gmail.com> wrote:
>>>
>>> I've been using F16 since before Christmas and I must say that it has
>>> become a very polished and powerful release.
>>>
>>> Kudos to those who have worked so hard on it. We don't thank you
>>> people enough. Your work is greatly appreciated.
>>>
>> F16 is from the previous century. Now is f17 era. Anyway, thank you,
developers.
>
>
> Even though Fedora 17 is the current release of Fedora, and F18 is on the
way I'm still using Fedora 16 and until I have a dire need to upgrade I
don't think I'll be doing so until it's EOL. I'm not going to keep jumping
from version to version just because they've been released. Especially when
sometimes they may have an adverse affect on some piece of hardware of
some software. But I also want to echo the sentiment...so..."to the
individuals who struggle, toil, and beat away on an "almost perfect" OS
Many thanks and please don't EVER stop the great work you're doingO
>
> Cheers!
>
> EGO II
>
> --
> users mailing list
> users(a)lists.fedoraproject.org
> To unsubscribe or change subscription options:
> https://admin.fedoraproject.org/mailman/listinfo/users
> Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
> Have a question? Ask away: http://ask.fedoraproject.org
Yes before finding Gentoo, it was my go to distro. For a binary based
distro, it's at the top of my list.
Terry
11 years, 9 months
Memory......
by EGO-II.1
Hello All,
I was just wondering if anyone knew of a program, or command that give
you a "scan" of your memory running on your system? Preferably, it
should also give you stats as to what KIND of memory you have, the
AMOUNT of memory, and the MAX capacity that your machine can hold. Any
advice or suggestions would be greatly appreciated.
EGO II
11 years, 9 months
How to limit maximum number of TCP connections
by Jatin K
Dear All
I'm on FC 15 which is acting as a router for Cable Internet connection
for 145 PC on the LAN, which works fine... But there is one question in
my mind, How do I limit the maximum numbers of concurrent connections to
router. i.e. if I want to allow only 90 concurrent connection to the
router at the given time only 90 PCs can pass through the router or
connect to the Internet other PCs/users have to wait until the connected
PCs session is over.
is there any solution/tweak available ???
--
°v°
/(_)\
^ ^ Jatin Khatri
RHCSA,RHCE,CCNA
Registerd Linux user No #501175
www.linuxcounter.net
No M$
11 years, 9 months
transaction error updating python-qpid
by Robert G. (Doc) Savage
Ran into a transaction error trying to update python-qpid to 0.16-1 on
my F17 laptop yesterday:
# yum -y update --skip-broken
Here are the qpid packages I have installed:
$ rpm -qa | grep qpid | sort
python-qpid-0.14-1.fc17.noarch
python-qpid-qmf-0.14-1.fc17.2.x86_64
qpid-cpp-client-0.14-1.fc17.2.x86_64
qpid-cpp-server-0.14-1.fc17.2.x86_64
qpid-qmf-0.14-1.fc17.2.x86_64
See the last line below for the transaction error. Anyone have any
suggestions how to work around this one?
--Doc Savage
Fairview Heights, IL
================================================================================================
Package Arch Version Repository Size
================================================================================================
Updating:
python-qpid noarch 0.16-1.fc17 updates 397 k
Skipped (dependency problems):
boost-filesystem i686 1.48.0-11.fc17 fedora 72 k
boost-program-options i686 1.48.0-11.fc17 fedora 125 k
boost-system i686 1.48.0-11.fc17 fedora 30 k
python-qpid-qmf x86_64 0.16-1.fc17.2 updates 369 k
qpid-cpp-client i686 0.16-1.fc17.2 updates 1.0 M
qpid-cpp-client x86_64 0.16-1.fc17.2 updates 984 k
qpid-cpp-client-devel x86_64 0.16-1.fc17.2 updates 386 k
qpid-cpp-server i686 0.14-1.fc17.2 fedora 1.0 M
qpid-qmf x86_64 0.16-1.fc17.2 updates 429 k
Transaction Summary
================================================================================================
Upgrade 1 Package
Skipped (dependency problems) 9 Packages
Total size: 397 k
Downloading Packages:
Running Transaction Check
Running Transaction Test
Transaction Check Error:
file /usr/bin/qpid-python-test from install of python-qpid-0.16-1.fc17.noarch conflicts with file from package python-qpid-qmf-0.14-1.fc17.2.x86_64
11 years, 9 months
