F17 (dracut) can't find root filesystem in LVM volume
by Todd Hesla
Dear fellow Fedora users,
I just upgraded from F15 to F17, but it won't boot--says it can't find
the root filesystem, which is on a logical volume in an LVM volume group.
(See boot messages below.) For the record, F15 booted just fine with this
structure.
I know this problem--or at least very similar problems--have been discussed many
times, both in this mailing list, and also in FedoraForum.org. But none of the
suggestions I have seen so far in either of those places seem to fix my problem.
I did try one suggestion found in the Fedora docs (detailed below) which got me
past the first "bump", only to run into a second problem--this one apparently
involving udev.
So I'm stuck with an unbootable F17 system. If anyone has any insight into what
might be going on, I'd be very grateful.
Thank you very much.
--- boot messages ---
Cannot open font file True
ata_id[237]: unable to open '$devnode'
ata_id[238]: unable to open '$devnode'
dracut Warning: Unable to process initqueue
dracut Warning: /dev/FedoraVolGroup/RootLogVol does not exist
dracut Warning: /dev/mapper/FedoraVolGroup-RootLogVol does not exist
Dropping to debug shell.
dracut:/#
If I then enter 'lvm vgchange -ay',
followed by 'exit', the system begins to boot, but then encounters udev errors,
and aborts to emergency mode:
[ 1652.284204] udevd[678]: invalid rule '/etc/udev/rules.d/55-hpmud.rules:31
[ 1652.299298] udevd[678]: unknown key 'sysFS{idVendor} in /etc/udev/rules.d/55
.
.
.
[ xxxx.xxxxxx] kvm: disabled by bios
[ xxxx.xxxxxx] udevd[678]: unknown key 'BUS' in /etc/udev/rules.d/85-pcscd-egate
[ xxxx.xxxxxx] udevd[678]: invalid rule 'etc/udev/rules.d/85-pcscd-egate.rules:
.
.
.
[ xxxx.xxxxxx] udevd[788]: error: can not open 'sys/devices/platform/microcode/
.
.
.
Dependency failed. Aborted start of /home
Dependency failed. Aborted start of Mark the need to relabel after reboot
Dependency failed. Aborted start of Relabel all filesystems, if necessary
Welcome to emergency mode. ...
What's going on? And how should I proceed?
Thank you very much.
Regards,
--
Todd Hesla
10 years, 10 months
xset and display invalid id.
by Frank Murphy
Have the following in xfce autostart:
#!/bin/bash
# Disable screensaver and dpms emergy star.
export DISPLAY :0.0
xset s off && \
xset -dpms
on running:
./xset
./xset: line 4: export: `:0.0': not a valid identifier
It appears to be the correct display going by:
echo $DISPLAY
:0.0
--
Regards,
Frank - I check for new mail app. 20min
www.frankly3d.com
10 years, 10 months
SOLVED Re: logwatch and nfs share sizes
by Frank Murphy
On Wed, 5 Jun 2013 14:00:49 +0100
Frank Murphy <frankly3d(a)gmail.com> wrote:
> from logwatch:
> yumser.frankly3d.home:/lists 72G 7.3G
> 64G 11% /lists
>
> The yumser share is 1T
>
> Why does logwatch on the client say 72G
Seemingly it happens if you share under / on the server.
So umount *shares
edit a bit
mount shares on /opt/*
--
Regards,
Frank - I check for new mail app. 20min
www.frankly3d.com
10 years, 10 months
no printout, but no other hint of error. F18.
by William Mattison
Hi,
When I try to print anything out, I get no printout. Even a test page does not come out. But no indication of trouble shows up on the monitor, and no indication of trouble on the printer's display. I did download and install the driver. cups gives no hint of trouble that I recognize. If I restart the system and boot up with Windows 7 home, I do get printouts.
The printer is a Xerox WorkCentre 6015ni, I'm using Fedora-18, 64-bit, and the printer is connected to the system via usb bus. This is a stand-alone home desktop.
I'm neither trained nor experienced in sys. admin. I've exhausted the help I can get from the printer's manual (media and web site). Any help you can give will be appreciated.
Bill.
10 years, 10 months
New avconv instead of ffmpeg
by Dario Lesca
About ffmpeg, a Debian's user say:
> "This package contains the deprecated ffmpeg program. This package
> also serves as a transitional package to libav-tools. Users are
> advised to use avconv from the libav-tools package instead of ffmpeg.
>
> Libav is a complete, cross-platform solution to decode, encode,
> record, convert and stream audio and video."
http://libav.org/
I'm looking for a Fedora's package for libav-tools (or avcomv)
Someone can help me?
Many thanks
--
Dario Lesca - sip:dario@solinos.it
(Inviato dal mio Linux Fedora18+Gnome3)
10 years, 10 months
logwatch and nfs share sizes
by Frank Murphy
from logwatch:
yumser.frankly3d.home:/lists 72G 7.3G
64G 11% /lists
The yumser share is 1T
Why does logwatch on the client say 72G
--
Regards,
Frank - I check for new mail app. 20min
www.frankly3d.com
10 years, 10 months
yum fails on old F9 system
by Gary Stainburn
Hi folks.
I've still got a number of old F9 systems that are still doing a sturdy job
(and I don't have time to upgrade).
However, one of them has got a broken yum setup. Every time I try to do any
updates etc. I get the following. I've tried 'yum clean all' but that hasn't
helped.
Any ideas what I need to do to fix it?
[root@groucho ~]# yum upgrade
Loaded plugins: refresh-packagekit
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in <module>
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
File "/usr/share/yum-cli/yummain.py", line 104, in main
result, resultmsgs = base.doCommands()
File "/usr/share/yum-cli/cli.py", line 339, in doCommands
self._getTs(needTsRemove)
File "/usr/lib/python2.5/site-packages/yum/depsolve.py", line 101, in _getTs
self._getTsInfo(remove_only)
File "/usr/lib/python2.5/site-packages/yum/depsolve.py", line 112, in
_getTsInfo
pkgSack = self.pkgSack
File "/usr/lib/python2.5/site-packages/yum/__init__.py", line 592, in
<lambda>
pkgSack = property(fget=lambda self: self._getSacks(),
File "/usr/lib/python2.5/site-packages/yum/__init__.py", line 435, in
_getSacks
self.repos.populateSack(which=repos)
File "/usr/lib/python2.5/site-packages/yum/repos.py", line 251, in
populateSack
sack.populate(repo, mdtype, callback, cacheonly)
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 162, in
populate
if self._check_db_version(repo, mydbtype):
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 223, in
_check_db_version
return repo._check_db_version(mdtype)
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1147, in
_check_db_version
repoXML = self.repoXML
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1305, in
<lambda>
repoXML = property(fget=lambda self: self._getRepoXML(),
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1297, in
_getRepoXML
self._loadRepoXML(text=self)
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1287, in
_loadRepoXML
return self._groupLoadRepoXML(text, ["primary"])
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1271, in
_groupLoadRepoXML
if self._commonLoadRepoXML(text):
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 1122, in
_commonLoadRepoXML
result = self._getFileRepoXML(local, text)
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 904, in
_getFileRepoXML
cache=self.http_caching == 'all')
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 744, in
_getFile
result = self.grab.urlgrab(misc.to_utf8(relative), local,
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 497, in
<lambda>
grab = property(lambda self: self._getgrab())
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 492, in
_getgrab
self._setupGrab()
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 481, in
_setupGrab
self._grab = mgclass(self._grabfunc, self.urls,
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 602, in
<lambda>
urls = property(fget=lambda self: self._geturls(),
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 599, in
_geturls
self._baseurlSetup()
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 559, in
_baseurlSetup
self.mirrorurls = self._replace_and_check_url(mirrorurls)
File "/usr/lib/python2.5/site-packages/yum/yumRepo.py", line 594, in
_replace_and_check_url
print 'YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
\n Eg. %s' % misc.to_utf8(skipped)
File "/usr/lib/python2.5/codecs.py", line 303, in write
data, consumed = self.encode(object, self.errors)
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1543:
ordinal not in range(128)
[root@groucho ~]#
--
Gary Stainburn
Group I.T. Manager
Ringways Garages
http://www.ringways.co.uk
10 years, 10 months
Fedora 18 on Dell XPS13
by Ranjan Maitra
Does anyone have any experience with F18 on a Dell XPS13 with the FHD
1080p display? What does this Full High-Definition 1080p mean
anyway? I guess my question is: is this the real resolution or some
virtual resolution not obtained via linux.
I am interested in this because it claims to have a 1080 vertical
resolution (not sure if this is accurate) in an Ultrabook.
Note that Dell sells this with Ubuntu 12.04 LTS (for a price more than
with MS Windoze).
http://www.dell.com/us/business/p/xps-13-linux/pd.aspx
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be
deleted on receipt. For those needing to send personal or professional
e-mail, please use appropriate addresses.
____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium
10 years, 10 months
man chmod (2) How?
by Frank Murphy
Trying to learn some of this "man" pages
How do you of experience use "man chmod (2)"
keeps coming up as chmod1
--
Regards,
Frank - I check for new mail app. 20min
www.frankly3d.com
10 years, 10 months
fedup from beta
by Richard Vickery
I hope this isn't in HTML - please alert me if it is; I don't know if
fedup changed the mail setup, and forget where Thunderbird's check-box
is to fix it.
I'm just curious as to how to fedup when F19 comes out; I am aware that
the command is
fedup F18->F19
however, this is the beta as opposed to F18. Of course, F18 is available
to boot into, and I guess users boot into that to use the command above.
I suppose I answered my own question.
10 years, 10 months