Disable NetworkManager
by Sergio Belkin
Hi folks,
I'd want to disable NetworkManager, I've performed a minimal install and I
don't need it, please could you help me?
I've tried disabling using systemctl, but network.service does not set ip
address.
Thanks in advance
--
--
Sergio Belkin http://www.sergiobelkin.com
LPIC-2 Certified - http://www.lpi.org
10 years, 2 months
must be missing something
by Aaron Konstam
II used fed up to upgrade my system to f20 but when I executed;
fedup --network 20
my system was still running f18 according to uname.
What am I doing wrong and how can I correct my mistake?
10 years, 2 months
Entering Special Characters in new Gnome(Fedora 20)
by Antonio Olivares
Dear folks,
I got to use a compose key in previous versions of gnome or using a setxkbmap compose key when using other desktops. But in this machine using gnome, I can't do what I used to do:
https://help.gnome.org/users/gnome-help/3.3/tips-specialchars.html.en#com...
I want to do the same here since adding command(setxkbmap -option compose:ralt) to ~/.bashrc or ~/.bash_profile does not work. How can I add compose key or is there a new way to do it?
Best Regards,
Antonio
[olivares@localhost Documents]$ uname -a
Linux localhost.localdomain 3.12.6-300.fc20.x86_64 #1 SMP Mon Dec 23 16:44:31 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
[olivares@localhost Documents]$ cat /etc/fedora-release
Fedora release 20 (Heisenbug)
[olivares@localhost Documents]$
____________________________________________________________
FREE 3D MARINE AQUARIUM SCREENSAVER - Watch dolphins, sharks & orcas on your desktop!
Check it out at http://www.inbox.com/marineaquarium
10 years, 2 months
BTRFS scrub
by Jorge Fábregas
Hi all,
I'm experimenting for the first time with btrfs on a scratch partition
and I wanted to test the scrub feature with:
#btrfs scrub start /btrfs
..but this is what I get when I check the status:
#btrfs scrub status /btrfs
scrub status for 543c5220-30ec-472b-a8ec-8c4c49f1fd32
scrub started at Mon Jan 27 10:26:50 2014 and was aborted after 0 seconds
total bytes scrubbed: 0.00 with 0 errors
I assume of course that checksums for data & metadata are enabled. I
created the filesystem simply with:
# mkfs.btrfs /dev/sdc1
I'm not sure if I had to specify some option at creation time or if I
have to specify any at mount time (to enable the checksums).
Thanks for any help.
Regards,
Jorge
10 years, 2 months
Re: rkhunter warnings, maybe yum issues?
by William Mattison
Joe says:
> If it helps, I don't have either a /dev/dev or a /root/.readahead.
> However, I'm running F19 on my desktop, with Xfce, although I never use
> a GUI as root. I also don't have rkhunter installed, so that might be
> significant.
The file is not "/root/.readahead". The mystery file is "/.readahead". What is this mystery file?
Frank asks:
> Did you run rkhunter prior to update? to check for nasties? # if not too late now.
yes.
> did you run "rkhunter --propupd" after FN+1 which would be required
yes.
John says (regarding "rpm -qf --queryformat..." error codes)
> This means that when rkhunter (RKH) uses the 'rpm' command to check a
> package it is getting an error back. All it can do is log the problem.
> If you run something like 'rpm -V chkconfig' then you will probably get
> an error - that is what RKH is seeing.
But why all the rpm errors? Is yum not doing something that it should be doing during an update? Am I not doing something I should be doing? Is something wrong with RPM or my RPM database? What and where is the real bug, and what's the permanent fix?
John says (regarding prelink issues):
> The problem here is prelinking. It will change file properties when it
> runs, but RKH tries to detect this and so obtain the true values for
> each file (either by using the rpm package manager or using the prelink
> command to verify the file). In some cases a dependency the file has,
> has changed. again, RKH cannot do anything about that, but suggests
> running the prelink command. If it is occurring a lot with different
> files, then you can try running 'prelink -qa', 'prelink -fa' or just
> wait for the regular prelink cron job to run when it should sort out
> prelinking problems. However, when I last looked the job ran about once
>every two weeks :-)
"prelink -qa" fixes things only until the next yum update. Should yum do a "prelink -qa" at the end of each update?
John says (regarding the GasKit rootkit warning):
> It's a bug in F20 with the 'dracut' package, the '/dev/dev' directory is
> created by mistake(see
> https://bugzilla.redhat.com/show_bug.cgi?id=1045116). I got the same
> problem. There is a fix, or you could wait for an update to the package.
> You can whitelist this in your RKH config file (see RTKT_DIR_WHITELIST).
Good. Thank-you, John.
Bill.
10 years, 2 months
Fedora application for iTunes
by Paul Smith
Dear All,
I am trying to watch some videos on iTunes. Is that possible with Fedora?
Thanks in advance,
Paul
10 years, 2 months
Can't resume ThinkPad from suspend
by Suvayu Ali
Hi,
I have a new ThinkPad (x240) running 3.12.8-300.fc20.x86_64. I can
suspend it just fine, but I can't resume. This is what I see in the
journal:
Jan 27 03:49:05 localhost systemd[1]: Starting Sleep.
-- Subject: Unit sleep.target has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sleep.target has begun starting up.
Jan 27 03:49:05 localhost systemd[1]: Reached target Sleep.
-- Subject: Unit sleep.target has finished start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit sleep.target has finished starting up.
--
-- The start-up result is done.
Jan 27 03:49:05 localhost systemd[1]: Starting Suspend...
-- Subject: Unit systemd-suspend.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit systemd-suspend.service has begun starting up.
Jan 27 03:49:05 localhost systemd[1]: Starting Network Manager Script Dispatcher Service...
-- Subject: Unit NetworkManager-dispatcher.service has begun with start-up
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- Unit NetworkManager-dispatcher.service has begun starting up.
Jan 27 03:49:05 localhost dbus-daemon[574]: dbus[574]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 27 03:49:05 localhost dbus[574]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Jan 27 03:49:05 localhost systemd-sleep[29852]: Suspending system...
-- Subject: System sleep state suspend entered
-- Defined-By: systemd
-- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
--
-- The system has now entered the suspend sleep state.
After this, I can't see anything when I tried to wake up my laptop. The
next thing I see is when I had to force a reboot.
-- Reboot --
Jan 27 11:51:44 localhost systemd-journal[93]: Runtime journal is using 8.0M (max 383.8M, leaving 575.8M of free 3.7G, current limit 383.8M).
Jan 27 11:51:44 localhost systemd-journal[93]: Runtime journal is using 8.0M (max 383.8M, leaving 575.8M of free 3.7G, current limit 383.8M).
Jan 27 11:51:44 localhost kernel: Initializing cgroup subsys cpuset
Jan 27 11:51:44 localhost kernel: Initializing cgroup subsys cpu
Jan 27 11:51:44 localhost kernel: Initializing cgroup subsys cpuacct
... and so on.
How do I debug this? How can I get more information why the resume
fails? Thanks for any ideas.
Cheers,
--
Suvayu
Open source is the future. It sets us free.
10 years, 2 months
restorecond error messages.
by Ed Greshko
Is anyone seeing errors such as this in their logs?
Jan 31 07:39:49 meimei restorecond: Warning! /root/.xauthlpj2gn-l refers to a file with more than one hard link, not fixing hard links.
Jan 31 07:39:49 meimei restorecond: (null) get context on /root/.xauthlpj2gn-n failed: 'No such file or directory'
Seems to me like https://bugzilla.redhat.com/show_bug.cgi?id=483371 may have resurfaced.
--
Getting tired of non-Fedora discussions and self-serving posts
10 years, 2 months
yum/dnf setup to download packaged after x days
by Ranjan Maitra
Hello,
This may be a pipe wish but I was wondering if there is a way to set up
yum or dnf such that it would download and install a package that has
been in the repos for a particular number of days.
Is this at all possible?
Why would anyone want this? I have suffered much (indeed for the first
time for the past ten years) because of the recent buggy selinux-related
rpm. I have tracked this down to my urge to keep my system updated on a
daily basis. I want to modulate this urge to only download and install
packages that have not been superseded within 3-4 days.
Btw, I don't know if this was at all possible, but it would have been
nice if a corrective rpm was pushed to fix all all those problems that
arose with the push of the bad selinux-related package. That would have
been really helpful beacause right now, it is impossible to tell where
the problem is with regard to a particular (seemingly unrelated)
package (such as pdfnup/pdfefit, or for that matter, flash-plugin).
Many thanks and best wishes,
Ranjan
--
Important Notice: This mailbox is ignored: e-mails are set to be
deleted on receipt. Please respond to the mailing list if appropriate.
For those needing to send personal or professional e-mail, please use
appropriate addresses.
____________________________________________________________
FREE ONLINE PHOTOSHARING - Share your photos online with your friends and family!
Visit http://www.inbox.com/photosharing to find out more!
10 years, 2 months