smartd errors
by Paolo Galtieri
Folks,
recently I have started seeing these messages in /var/log/messages
Oct 27 10:26:13 jackstraw smartd[1177]: Device: /dev/sde [SAT], 16
Currently unreadable (pending) sectors
Oct 27 10:26:13 jackstraw smartd[1177]: Device: /dev/sde [SAT], 16
Offline uncorrectable sectors
which are mounted as follows
/dev/sde1 on /media/NSM/NSM-SENSOR-1 type ext4
(rw,nosuid,nodev,noexec,noatime,seclabel,data=ordered)
/dev/sde2 on /media/NSM/NSM-SENSOR-2 type ext4
(rw,nosuid,nodev,noexec,noatime,seclabel,data=ordered)
I have unmounted the filesystems and run fsck on them and fsck reports
no errors.
[pgaltieri@jackstraw ~]$ sudo fsck /dev/sde2
fsck from util-linux 2.26.2
e2fsck 1.42.12 (29-Aug-2014)
NSM-SENSOR-2: clean, 11/45498368 files, 2905980/181964288 blocks
[pgaltieri@jackstraw ~]$ sudo fsck /dev/sde1
fsck from util-linux 2.26.2
e2fsck 1.42.12 (29-Aug-2014)
NSM-SENSOR-1: clean, 32/46080000 files, 2993510/184320000 blocks
It only reports errors on this drive.
Should I be concerned about what smartd is saying? How do I, if
possible, correct this?
Paolo
8 years, 3 months
VNC and sound
by Chris Kottaridis
I am running Fedora 22 on a machine that is off in a closet and am using
VNC to access it from a machine at my desk. I followed the instructions
in System Admin guide chapter 8:
https://docs.fedoraproject.org/en-US/Fedora/22/html/System_Administrators...
I successfully got Tiger VNC server working. it was quite easy. Cudos to
everyone involved to make that so simple.
My VNC client is Windows TigerVNC version 1.5.
I don't seem to get sound. It doesn't seem to come out on my VNC client
or on the VNC server's sound card. My remote machine is close enough
that I could run a wire from it's sound card to the speakers on my desk
if that is easier. But, right now I can;t get the sound to come out the
VNC server sound card.
Any pointers or recommendations are appreciated.
Thanks
Chris Kottaridis
8 years, 3 months
Fedora mirror speed's are low!
by Mihuleac Sergiu
Hi!
I'm from Romania, the speed from Fedora repo mirror is very low (from
50kb/s to 1 mb/s when it's good, usually the download speed stays
between 50 and 150 kb/s with the official repos and over 1 mb/s with
other repos ) when doing updates and when I install packages with dnf. I
tried using fastmirror module but I see there is no change and I lose
even more time because of the search for the best mirror.
1. What can I do to resolve this issue?
2. Is there a way to manually test mirrors and chose the best one for me?
3. How do I know witch mirror can I trust?
4. Where can I find a mirror list?
5. How can I create a local mirror?
---
Best Wishes,
Mihuleac Sergiu
8 years, 4 months
nedit
by Patrick Dupre
Hello,
I cannot any more make CRT+C ctl+V under nedit as soon that there are
2 windows open.
Is nedit still maintained?
I would be happy to use another editor if I find one which let me
copy data by column (CTL+Maj V with nedit).
Thank for any help.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 4 months
Upgrade advice
by Jeffrey Ross
I'm looking for some suggestions on how to upgrade an older Fedora system
and keep as many of the configurations as possible for the applications
that are being used.
Currently the system is running Fedora 16 and there are at least two
things that are preventing me from successfully running fedup or the yum
upgrade.
The first stumbling block is that system was installed with separate
partitions for /, /boot, /var, & /usr and I think that the separation of /
and /usr is my biggest issue.
The second issue is the system is setup with RAID1 on all partitions with
the bootloader (Grub ?) installed on both disks in the event of a disk
failure.
I would like to avoid a new/clean install (I know I can preserve /home) if
at all possible.
Any suggestions on how to proceed?
Thanks, Jeff
8 years, 4 months
upgrade to 23 when it comes out
by William Biggs
I installed xface f22 64 bit then installed Cinnamon Desktop . When 23
comes out if I upgrade using fedup . I think that what is is called .
Will I get the Cinnamon Desktop . or the xface desktop since it was the
core install ?
--
William Biggs
bbiggs(a)fastmail.com
8 years, 4 months
F22 : No sound from firefox or chrome
by sean darcy
On F22 XFCE. Sound works with the XFCE media player Parole. But I get no
sound from firefox, chrome or midori (the XFCE browser).
But - I do get sound from the TOR browser. ???
PulseAudio Manager shows as clients:
Chrome input
CubebUtils - which has a firefox icon next to it
Any help appreciated.
sean
8 years, 4 months
Configuring/setup of WiFi card on Dell E6220 Laptop
by Max Pyziur
Greetings,
I've just installed F22 on a Dell E6220 laptop (in anticipations of next
week's F23 rollout).
;-)
A few issues left to squre
I'm trying to setup WiFi (the Ethernet device works correctly, btw).
There is an external switch controlling power to the card, and an
indicator light. Those show that the item is "on."
lspci -v for the WiFi card reports the following:
02:00.0 Network controller: Broadcom Corporation BCM43228 802.11a/b/g/n
Subsystem: Dell Wireless 1530 Half-size Mini PCIe Card
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at e1b00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [d0] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [13c] Virtual Channel
Capabilities: [160] Device Serial Number 00-00-19-ff-ff-5a-60-d8
Capabilities: [16c] Power Budgeting <?>
Kernel modules: bcma
iwconfig and ifconfig -a report no instance of the card.
In NetworkManager, this is no MAC address shown for a WiFi card when I try
to do a WiFi setup
I assume that is a kernel module issue. When I issue the
modprobe bcma
and then
lsmod | grep bcma
it shows that the module is loaded.
However having googled some on this subject, I see that there are probably
other modules (and configuration settings) required to make this WiFi card
operable.
Per suggestions, I have installed kmod-wl, akmod-wl, but I suspect that
there is something else that needs to be done.
Much thanks for any advice on this topic.
Max Pyziur
pyz(a)brama.com
8 years, 4 months
Another F22 issue
by Stephen Davies
Under F21, I could configure a screen saver which trawled through my photo
collection.
I cannot find this facility under F22.
Does it exist? If so, where? If not, why not?
8 years, 4 months