users April 2015

users@lists.fedoraproject.org

114 participants
121 discussions

Setting up HP laserjets (1012) to work with Fedora 11
by gilpel＠altern.org 05 Jun '15

05 Jun '15

Unrelated to topic: I lost quite a bit of messages downloading them from Altern to Thunderbird and not being able to upload afterwards* but I would like to thank Todd Zullinger for reminding me that welcome messages are not just a way for forums owner to be polite :) But somethimes, you have many things to read... * ping smtp.altern.org ping: unknown host smtp.altern.org This used to work, but not anymore, according to lantre.org. So, I'll have to set up a Gmail account. Later. ----------------------------- Setting up HP laserjets (1012) to work I discovered a bug with the setting of my printer, an HP 1012. The configuration seemed really easy as it was identified correctly on a USB Port. A few clicks, and I was done. I didn't even check to see if it worked: I never had a problem setting this printer for years. Then, I tried to print and I had a message saying that the printer wasn't connected. Weird: CUPS was installed, the wire was OK. I went back to configuration and I saw there's an option for using HAL, the Hardware Abstraction Layer. I do believe HAL has always been part of setting my printer. So, I selected it but received the message that the HPIJS driver was not available. (Note that I tried the Gutenprint driver when the printer wasn't set to use HAL: it didn't work.) I installed hpijs, now everything is fine. I don't remember ever being asked to use HAL with another distro: it was always put to contribution, I suppose. So, there must be a way around this. Most newbies will never consider an option that isn't selected by default for a printer. Most probably other printers that use HPIJS have the same problem. Those that use ppd files, probably not.

2 3

Did I really install Kmod-Nvidia ?
by gilpel＠altern.org 05 Jun '15

05 Jun '15

There are all sorts of instructions as to how to install Kmod-Nvidia on Fedora, but I thought yum would do a better job of guessing my configuration (x86_64, 9400 GT) to get the most up-to-date correct package and getting everything right. So, I just typed: yum install kmod-nvidia Now, /etc/X11/xorg.conf looks like this: # Xorg configuration created by livna-config-display Section "Files" ModulePath "/usr/lib64/xorg/modules/extensions/nvidia" ModulePath "/usr/lib64/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" Option "AddARGBGLXVisuals" "True" EndSection Section "Extensions" Option "Composite" "Enable" EndSection The file is only a few minutes old... So, I suppose it's a new config for the Kmod driver. But the process was so transparent, I can't help but wonder if all those modifications to the kernel that I read about in the doc have been made. If so, why not provide the documentation that all that is needed is to type the yum command? The Nouveau driver worked very well and, since I'm not too sure I'll install 3D, maybe I could have kept it. But my screen kept blanking once in a while for a few seconds. This happened with my previous computer too -- it had an old ATI card, the same monitor and a very standard open source driver for ATI -- but not so often and not for so long: it was just a quick blank. I thought this might fix the problem. Also, I intend to install a TV card and, it anything doesn't work, I'm sure the first suggestion from Nvidia will be to install their driver. As the material I buy is only on a one week money back guarantee, I prefer to make sure everything works in advance. Also, as it often happens when I download new packages, there was a socket error and a long (~ 1-2 min) halt before another server took over. (I forgot to save the console screen before I rebooted, but the name "liberty" was part of it.) After the installation finished, the rx/tx light of the modem began flashing very fast as if there was a download occuring... or maybe an upload if some information on the installation has to be sent back to rpmfusion or nvidia. No indication of what was going on appeared onscreen. Is this anything to be concerned about? Any idea What this transfer was about?

4 6

Re: Getting more juice from a preamp?
by Antonio Olivares 05 Jun '15

05 Jun '15

--- On Sat, 7/11/09, gilpel(a)altern.org <gilpel(a)altern.org> wrote: > From: gilpel(a)altern.org <gilpel(a)altern.org> > Subject: Getting more juice from a preamp? > To: fedora-list(a)redhat.com > Date: Saturday, July 11, 2009, 10:34 PM > I listen to sound on my system with > headphones, so I only use the preamp. > > This aft, I was watching this feature on the cause of > Beethoven's death: > > http://www.radio-canada.ca/emissions/decouverte/2008-2009/Reportage.asp?idD… > > but the sound is a bit weak. You don't miss anything, but > you feel you > have to be very attentive. Maybe they wanted to make you > feel like you're > getting deaf yourself :) > > I checked alsamixer, but volume control is maxed out. Is > there any other > control somewhere else? Anything in alsactl or pulseaudio, > for instance? > > Thnaks! > > -- Try the following: $ alsamixer -c0 then $ pavucontrol after adjusting those to your preference save your settings with $ su -c '/sbin/alsactl store' put in your password and settings should be saved for next reboot, ***unless*** an update(s) breaks your configuration and let us hope that those things don't happen :) Regards, Antonio

2 1

Problems with 3COM 3C900Combo
by Christian Moller 05 Jun '15

05 Jun '15

Hi all Fedora users, I have just joined this list. I am running the latest Fedora but I can't get my 3C900Combo networking card to work. I can see that the card is installed but no IP-address is asigned to it and I can't set it. So I think that there is a bug in that driver. Any other user out there who have a solution for this? Best regards and thanks, Christian

2 1

RAGE XL Framebuffer
by Yanick Quirion 05 Jun '15

05 Jun '15

Hi all I know that is not a specific question about Fedora, but I can't find answer on the kernel mailing list. Is somebody having server with integrated ATI RAGE XL video card? Is it possible to patch the kernel to support this video card? If I add VGA=791 in my grub.conf, I will have a resolution of 1024x768 which is good, but the display is very slow (especially when the screen is scrolling). If I use I this: "video=aty128fb:1024x768@70" it will not work. I'm using kernel 2.4.22 but I will try 2.6.0-test11 today. If somebody has a patch, a link or anything else that can help me, it will be appreciated. Thanks for your help. Regards, ----------- Yanick Quirion Administrateur Réseau/Network Manager NEOKIMIA INC. Institut de Pharmacologie de Sherbrooke 3e étage (Édifice Z5) 3001 12e avenue Nord Sherbrooke, Québec CANADA J1H 5N4 Tél.: +1 819 820-6040 Direct: +1 819 820-6855 Fax.: +1 819 820-6841 email: Yanick.Quirion(a)neokimia.com

2 1

Soundblaster
by Antonio Montagnani 05 Jun '15

05 Jun '15

I have two similar PC (old Pentium but workin fine) In Pc no.1 I upgraded from RH8 to Fedora and it went fine: Soundblaster is working fine In Pc no.2 I made a fresh installation but in redhat-sound-config Fedora doesn't see any card, that was working on Redhat 9 after soundconfig... Where is the trick?? I assume that my Sounblaster is an old 16...but fine on a router/firewall. Tnx Antonio

4 6

Youtube-dl problem/question
by JD 03 Jun '15

03 Jun '15

$ ytdl -ckti --no-part --no-playlist "https://www.youtube.com/watch?v=l1zNZjH1KJk&list=PLMbPbsn-u_g1KVdcPGQvaNsao…" [youtube:playlist] Downloading just video l1zNZjH1KJk because of --no-playlist [youtube] l1zNZjH1KJk: Downloading webpage [youtube] l1zNZjH1KJk: Downloading video info webpage ERROR: l1zNZjH1KJk: YouTube said: The uploader has not made this video available in your country. So, could someone explain (for the benefit of all fans of youtube-dl), how to get around this problem? Thanx.

6 13

WiFi restoration
by Timothy Murphy 12 May '15

12 May '15

One room in my house is at the boundary of WiFi reception, and WiFi occasionally fails there. When this happens it is nearly always restored by re-booting. Re-starting NetworkManager never does the trick, however. Is there any other step I could take, short of re-booting? I'm running Fedora-21/KDE. -- Timothy Murphy gayleard /at/ eircom.net School of Mathematics, Trinity College, Dublin

17 39

Tablet hardware
by Florian Weimer 09 May '15

09 May '15

Is there any tablet-like hardware which is well-supported by Fedora 20 and later? Something with a high-resolution display? I don't need 3D acceleration beyond what's needed to run a typical desktop environment, but I'd like to have lots of RAM, a bit of CPU power (perhaps even a current Core i7) and an SSD with decent read speed.

3 4

Yum and partial downloads.
by Robin Laing 08 May '15

08 May '15

This was a question asked of me by one of our network admins. Background. Today, while doing the updates on my machine at work, one of the packages was close to 300MB in size. Yum tried to download this file multiple times with no success. It kept timing out with the below 1000 Bytes/second for over 30 seconds. https://bugzilla.redhat.com/show_bug.cgi?id=964298 In one case, the file was at 99% complete when it stopped. Restarted on a different mirror at 0% Due to firewall rules there is bandwidth management and it allows downloads to start at a high speed only to slow down at 25MB. The Question. The network admin asked if Fedora was like Ubuntu that will continue downloading where it left off? I stated I doubted it as the display kept going back to zero Robin Laing

3 3