iso fedora 22
by Patrick Dupre
Hello,
Can I found the image:
Fedora-Workstation-22-x86_64.iso
not the Live version
not the netinstall version
the DVD version
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 7 months
rpm in background
by Patrick Dupre
Hello,
This task used to run very often on my machine and makes every slow.
How can I manage it?
rpm -q -a --queryformat %{NAME}\n%{VERSION}-%{RELEASE}\n%{EPOCH}\n%{GROUP}\n%{SUMMARY}\n\n
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 7 months
multipathd rienstated message filling up log
by Shawn Bakhtiar
Good morning,
/var/log/messages is being filled with following message "multipathd: 104:0: reinstated". I though it might be a bad controller card, or something wrong with the hardware as suggested in IRC, but I have installed FC 22 64bit on two separate machines (same configuration) and I’m getting these same message.
The messages don’t seem to be effecting performance or have any effect on data, and short of being annoying, I want to make sure there is not some more serious/heinous issue going on that I need to be aware of.
Machine Specs:
Proliant DL160 Smart Array E200 controller running RAID 1 (250GB mirrored).
[root@postoffice ~]# blkid
/dev/block/253:4: LABEL="root" UUID="7e2a3fef-cab0-44a3-b5ec-cd9a50267ee0" TYPE="xfs"
/dev/block/253:2: UUID="dBG0Mg-6MaT-Jfm3-XuFH-5PeA-a881-D7VWfa" TYPE="LVM2_member" PARTUUID="449dbbad-02"
/dev/block/253:1: UUID="b8cfeac4-9d28-402d-9ba6-7f41f583508a" TYPE="ext4" PARTUUID="449dbbad-01"
/dev/block/253:3: UUID="362b77ca-8bf7-434a-96cf-6e30fd9c5a79" TYPE="swap"
/dev/cciss/c0d0: PTUUID="449dbbad" PTTYPE="dos"
/dev/sda1: UUID="6412b71f-3dfb-41c9-82af-5030dcad856d" TYPE="ext3"
/dev/mapper/mpatha: PTUUID="449dbbad" PTTYPE="dos"
[root@postoffice ~]# multipath -l
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
mpatha (3600508b10010503953574630334a0004) dm-0 HP ,LOGICAL VOLUME
size=233G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
`- 0:0:0:0 cciss/c0d0 104:0 active undef running
[root@postoffice ~]# more /etc/fstab
...
UUID=7e2a3fef-cab0-44a3-b5ec-cd9a50267ee0 / xfs defaults 0 0
UUID=b8cfeac4-9d28-402d-9ba6-7f41f583508a /boot ext4 defaults 1 2
UUID=362b77ca-8bf7-434a-96cf-6e30fd9c5a79 swap swap defaults 0 0
/dev/sda1 /media/USBBackup_001 auto defaults 0 0
[root@postoffice ~]# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
devtmpfs 1966 0 1966 0% /dev
tmpfs 1976 0 1976 0% /dev/shm
tmpfs 1976 1 1976 1% /run
tmpfs 1976 0 1976 0% /sys/fs/cgroup
/dev/mapper/fedora_postoffice-root 233358 168507 64852 73% /
tmpfs 1976 0 1976 0% /tmp
/dev/mapper/mpatha1 843 148 636 19% /boot
/dev/sda1 1691174 329305 1275957 21% /media/USBBackup_001
tmpfs 396 0 396 0% /run/user/1000
Sample message logs:
Aug 14 07:24:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:06 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:11 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:16 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:06 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:11 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:16 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:27:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:27:06 postoffice multipathd: 104:0: reinstated
8 years, 7 months
Syntax error in /etc/profile?
by Tom Horsley
When I log in to my f22 box as a users that has ksh as
the shell, I see this show up on my terminal:
/etc/profile[68]: .: syntax error: `(' unexpected
Line 68 is just a line that is "dotting" various /etc/profile.d/*.sh
files, so I don't know where the actual error is coming from.
Anyone else seen this?
8 years, 7 months
pdftk
by Patrick Dupre
Hello,
What is the future of pdftk as part of fedora?
It did not find any good alternative.
Thank.
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
Tel. (33)-(0)3 28 23 76 12 | | Fax: 03 28 65 82 44
189A, avenue Maurice Schumann | | 59140 Dunkerque, France
===========================================================================
8 years, 7 months
systemd-timesync
by Robert Moskowitz
Over on the Fedora-arm list I am looking into systemd-timesync:
https://wiki.archlinux.org/index.php/Systemd-timesyncd
So what version of systemd is in F22 and F23b?
It seems that timedatectl (which is in F22) controls this, but it is not
acting like mentioned at the above site:
The daemon saves the current clock to disk every time a new NTP sync
has been acquired, and uses this to possibly correct the system clock
early at bootup, in order to accommodate for systems that lack an RTC
such as the Raspberry Pi and embedded devices, and make sure that time
monotonically progresses on these systems, even if it is not always correct.
Every time the system (armv7 with no rtc) boots without a network
connection the date stays at 1-1-70.
8 years, 7 months
selecting audio inputs with pulseaudio
by Tim
Has selecting audio inputs with pulseaudio improved any since Fedora 20?
On this machine, I can't find a way to use the line or mic input, by my
own choosing. e.g. For wanting to record something on the computer.
In the sound preferences, I have a sliding volume control next to a mic
symbol, and some kind of volume indicator below it. That, from time to
time, I find seems to pay attention to a microphone, but not always.
Under that is a box with a radio selection button for "built-in audio
analog stereo," which I presume just means the on-board sound card, or
another card (if I had one) rather than supposedly being a way to select
individual sound sources on a card.
I can play with the CLI alsamixer tool, but that seems rather hit and
miss, too, as well as being awful and extremely primitive. Not to
mention being just a two volume control for pulseaudio (master &
capture), or I can change to the "0 HDA Intel" sound card, and get a
plethora of sliders (not all of them have a corresponding socket on the
sound card, and another vague "capture" fader).
If I try using a program like audacity, I get input choices in the
program like pulse (next to useless), front mic 0, rear mic 0, line 0,
front mic 1, rear mic 1, line 1, which is a course of experimentation to
find which one might actually work, and it doesn't behave the same way
each time I use the program.
If I try using a program like skype, sometimes I can get it to pay
attention to the mike, but never to any other input source.
--
tim@localhost ~]$ uname -rsvp
Linux 3.19.8-100.fc20.i686 #1 SMP Tue May 12 17:42:35 UTC 2015 i686
All mail to my mailbox is automatically deleted, there is no point trying
to privately email me, I will only read messages posted to the public lists.
George Orwell's '1984' was supposed to be a warning against tyranny, not
a set of instructions for supposedly democratic governments.
8 years, 7 months
Moving Fedora 22 to RAID 0 - Trouble with initramfs
by Samuel Rakitničan
I have moved / partition to another partition formed in RAID 0
consisting of two SSDs. I have updated fstab with new partition UUID,
reinstalled GRUB2 and rebuild initramfs using dracut -f. Now computer
boots fine from RAID partition but hangs on when initramfs needs to
boot kernel from / partition found on RAID, because it can't find
partition with UUID that I've put in fstab.
Now from what I have understood when it drops me to dracut prompt in
initramfs boot process I indeed can't find the RAID assembled BUT I
can assemble it manually by using "mdadm -I /dev/sda" and "mdadm -I
/dev/sdb". If I boot from old hard drive the RAID is assembled
normally in kernel on boot time:
$ journalctl -b | grep "kernel: md"
Kol 30 01:20:53 computername kernel: md: bind<sdb>
Kol 30 01:20:53 computername kernel: md: bind<sda>
Kol 30 01:20:53 computername kernel: md: bind<sdb>
Kol 30 01:20:53 computername kernel: md: bind<sda>
Kol 30 01:20:53 computername kernel: md: raid0 personality registered
for level 0
Kol 30 01:20:53 computername kernel: md/raid0:md126: md_size is
500129792 sectors.
Kol 30 01:20:53 computername kernel: md: RAID0 configuration for md126 - 1 zone
Kol 30 01:20:53 computername kernel: md: zone0=[sda/sdb]
Kol 30 01:20:53 computername kernel: zone-offset= 0KB,
device-offset= 0KB,
Kol 30 01:20:53 computername kernel:
Kol 30 01:20:53 computername kernel: md126: detected capacity change
from 0 to 256066453504
Kol 30 01:20:53 computername kernel: md126: p1 p2 p3
Kol 30 01:20:53 computername kernel: md: export_rdev(sdb)
Kol 30 01:20:53 computername kernel: md: export_rdev(sda)
Kol 30 01:20:53 computername kernel: md: export_rdev(sdb)
Kol 30 01:20:53 computername kernel: md: export_rdev(sda)
The RAID is formed using onboard southbridge Intel controller. I have
managed to extract data from initramfs but I am not sure what to look
for, in particular what brings up RAID assembly.
/etc/udev/rules.d/65-md-incremental-imsm.rules seems like it's
responsible to assemble, but I am not sure.
Any thoughts why imsm RAID is not assembled in initramfs on boot?
8 years, 7 months
Sorting iPhone image files -
by Bob Goodwin
I have a number [thousands] of my daughter's iPhone files stored on my
server, each one has an "IMG_xxxx" number however they don't seem to
have a consistent relationship to date and time, not that we can sse
anyway. However it appears that each file does have that information,
e.g. datetime=2015:06:30 15:58:38]:
[bobg@box10 Ginette]$ file IMG_4823.JPG
IMG_4823.JPG: JPEG image data, Exif standard: [TIFF image data,
big-endian, direntries=10, manufacturer=Apple, model=iPhone 6 Plus,
orientation=upper-right, xresolution=154, yresolution=162,
resolutionunit=2, datetime=2015:06:30 15:58:38], baseline, precision 8,
3264x2448, frames 3
So it seems there probably is either software to sort them or a script
that would sort on the date shown by "file."
What can I do to accomplish this?
Bob
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box10 FEDORA-22/64bit LINUX XFCE Wildblue POP3
8 years, 7 months
rpmdev-setuptree in specific directory
by arnaud gaboury
Fedora 22
For some practical reasons, I would like to gather all my rpm build
somewhere else than ~/rpmbuild.
I can't find any option/conf file to change this default behavior.
Even when cd somewhere else, running the command will always create
~/rpmbuild.
I can of course create a symlink, but I am not very happy with this solution.
Thank you for tips.
--
google.com/+arnaudgabourygabx
8 years, 7 months
