users January 2017

users@lists.fedoraproject.org

117 participants
125 discussions

by Mark

Hi I'm testing Electrum on Fedora 25 and I'm missing the support for hardware wallet that Electrum is supposed to have. Do I need to install some additional package or has this feature been omitted? Cheers Mark

6 years, 11 months

3
8
0 / 0

Terrible F25 WiFi Performance

by Christopher

Since I upgraded to Fedora 25, I've had terrible network performance, and I'm not sure what's causing it. Any suggestions for troubleshooting or optimization? Any known issues with the "Intel Wireless 7265D" card or the "iwlwifi" driver in F25? Everything worked great in F24, but since F25, I get poor download speeds, and *REALLY* poor upload speeds. I should get a steady 25/25 Mbps down/up. Instead, I get an unsteady 6-20 Mbps down, and only ~1 Mbps up. I've ruled out everything but Fedora 25 (same hardware works fine in F24 and Windows), and it's making me kinda want to go back to F24. :( -- Christopher

7 years, 1 month

10
36
0 / 0

Google chrome gets deadlocked on F25

by Paul Smith

Dear All, I have google-chrome-stable-54.0.2840.100-1.x86_64 running on F25, but it deadlocks so often. Any solutions? Thanks in advance, Paul

7 years, 1 month

6
16
0 / 0

Networkmanagre Refuses to use my Dlink DWA-192 USB Wifi Device in F24

by Stephen Morris

Hi, Some time ago I was using this device on the 2.4GHz channel (Linux has always refused to use the 5GHz channel, I say Linux, because Ubuntu has always refused to use the 5GHz channel as Fedora has always refused to) and when it was working it was via the ATH9K driver. I switched the network to using Ethernet devices which are still working fine, but I wanted to go back to wifi again because the wifi throughput is potentially faster (the Ethernet devices sends/receives at 500Mbps whereas the 2.4GHz channel on wifi sends/receives at 600Mbps, if I could ever get the 5GHz channel working it sends/receives at 1300Mbps), but Networkmanager refuses to activate the wifi device now. How do I identify whether its the 4.8 kernels which are the issue or whether its Networkmanager and how do I rectify the situation? I am using kde at the moment and I have cut and pasted the wifi password back into the Networkmanager definition, and had the new password stored in Kwallet, but Networkmanager still refuses to recognize that the device is a device it can connect to. I should also add that the device works fine under Windows 10. regards, Steve

7 years, 1 month

5
23
0 / 0

Mount of NAS Ethernet Connect to Router Fails at Boot Time for CIFS Interface in F24

by Stephen Morris

Hi, My Nas device now fails to mount at boot time via the CIFS definition in fstab but the corresponding NFS definition mounts quite happily. Also after the system comes up and I log into KDE I can manually mount the CIFS device. As far as I am aware the only difference between when it was mounting at boot time and now is several system updates, also the system update I did yesterday morning (which updated several hundred packages, which included a new kernel) has not rectified the issue. The systemctl output is below, I have blanked out the userid and password for security reasons. Does anyone have any ideas why this has now stopped working? systemctl status mnt-nas.mount ● mnt-nas.mount - /mnt/nas Loaded: loaded (/etc/fstab; bad; vendor preset: disabled) Active: failed (Result: exit-code) since Tue 2017-01-17 06:40:15 AEDT; 40min ago Where: /mnt/nas What: //192.168.1.12/Volume_1 Docs: man:fstab(5) man:systemd-fstab-generator(8) Process: 1299 ExecMount=/usr/bin/mount //192.168.1.12/Volume_1 /mnt/nas -t cifs -o username=********,password=********,cache=strict,_netdev,rw (code=exited, status=32) Jan 17 06:40:15 localhost.localdomain systemd[1]: Mounting /mnt/nas... Jan 17 06:40:15 localhost.localdomain mount[1299]: mount error(101): Network is unreachable Jan 17 06:40:15 localhost.localdomain mount[1299]: Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Jan 17 06:40:15 localhost.localdomain systemd[1]: mnt-nas.mount: Mount process exited, code=exited status=32 Jan 17 06:40:15 localhost.localdomain systemd[1]: Failed to mount /mnt/nas. Jan 17 06:40:15 localhost.localdomain systemd[1]: mnt-nas.mount: Unit entered failed state. I have also listed below the fstab definition for the CIFS interface and the NFS interface. 192.168.1.12:/mnt/HD/HD_a2 /mnt/nfs nfs users,noatime,nolock,bg,sec=sys,tcp,timeo=1800,_netdev,rw 0 0 //192.168.1.12/Volume_1 /mnt/nas cifs auto,username=********,password=********,cache=strict,_netdev,rw 0 0 regards, Steve

7 years, 1 month

10
26
0 / 0

ATA2:00: link is slow to respond....

by Angelo Moreschini

Hi, my computer boot only in emergency mode ... Looking the journalctl (command journalctl -xb), I found (in thejournalctl ) these lines in red color : ATA2:00: link is slow to respond.... (and after..) ATA200: SRST failed (erro 16) That seem indicate that it is a problem to access the HDs.. I found a possible solution to the problem in this post: http://codeverge.com/opensuse.org.help.install/-solved-ata1-srst-failed-e... There is wrote that :...the problem can depend by the physic set up of the HD (as "master", "slave", "single drive", ...): this set up can be done by changing the position of a jumper on the HD... I know that, in the past time, the HDs had to be set physically in this way.., but recently I never heart anymore that the modern HD need this operation.. So actually I don't care anymore of the configuration of the HDs (my HD is Toshiba 1 TB that I bought few mounts ago). I would like to have a confirmation that what I read in the post is only an obsolete information and, in any case, I would like to know also what I can do to go around in my problem.. >From the command line: ls /dev/sd* I get: give me this input : /dev/sda /dev/sda1 /dev/sda2 /dev/sda5 /dev/sdb /dev/sdb1 /dev/sdb2 Thank you regards Angelo

7 years, 2 months

3
3
0 / 0

[F25, KDE] very very slow internet connexion

by Frédéric Bron

I experience very very slow internet connexions, in particular when on google web sites. Mostly I use firefox but occasionnaly konqueror. Is there anything I could do to determine if it comes from fedora, firefox or my internet provider? $ ping www.google.com 64 bytes from wk-in-x93.1e100.net (2a00:1450:400c:c04::93): icmp_seq=1 ttl=47 time=42.2 ms Cheers, Frédéric

7 years, 2 months

6
18
0 / 0

Dummy audio and no Wifi after upgrading to f25

by Tomas Repik

Hi, I've been struggling with both audio and wifi since i upgraded from F24 to F25. I went through many advices and suggestions (different kernels, restarting, reinstalling both alsa and pulseaudio) to solve the issues with no result. I don't have any audio feedback from my device (in audio settings only dummy output is shown). I filed a bug against pulseaudio [1]. I also provide output from lshw command [2]. It shows that both wifi and audio devices are UNCLAIMED (don't know what that mean). thanks for any help Tomas [1] https://bugzilla.redhat.com/show_bug.cgi?id=1416291 [2] https://trepik.fedorapeople.org/tmp/lshw

7 years, 2 months

3
5
0 / 0

KVM and 3D?

by Tom Horsley

I saw a blog post that claimed virt-manager 1.4 has the support for 3D video acceleration in virtual machines, then I saw lots of comments in the blog saying that it won't work without libvirt support. Since I always thought virt-manager just called libvirt to do everything that confused the heck out of me :-). Are there instructions of dummies anywhere about how to get 3D working in a virtual machine? Is there any chance it will ever work in a Windows virtual machine (the only reason I have a Windows hardware box is because I need to run an app that insists on 3D support).

7 years, 2 months

4
8
0 / 0

Re: [...] D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0

by Stephen Morris

On 31/01/2017 02:58, poma wrote: > On 29.01.2017 22:42, Stephen Morris wrote: >> On 27/01/2017 21:20, poma wrote: >>> On 26.01.2017 22:12, Stephen Morris wrote: >>>> On 24/01/2017 15:12, poma wrote: >>>>> On 23.01.2017 21:14, Stephen Morris wrote: >>>>>> On 23/01/2017 08:27, poma wrote: >>>>>>> On 22.01.2017 21:49, Stephen Morris wrote: >>>>>>>> On 23/01/2017 00:43, poma wrote: >>>>>>>>> On 21.01.2017 21:00, poma wrote: >>>>>>>>>> On 17.01.2017 22:12, Stephen Morris wrote: >>>>>>>>>> [...] >>>>>>>>>>> The lsusb output for that device is also below. >>>>>>>>>>> >>>>>>>>>>> Bus 010 Device 002: ID 2001:331a D-Link Corp. >>>>>>>>>>> >>>>>>>>>> [...] >>>>>>>>>> >>>>>>>>>> D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0 >>>>>>>>>> >>>>>>>>>> https://wikidevi.com/wiki/D-Link_DWA-192 >>>>>>>>>> http://support.dlink.com/ProductInfo.aspx?m=DWA-192 >>>>>>>>>> ftp://files.dlink.com.au/products/DWA-192 >>>>>>>>>> https://openitforum.pl/index/recenzje/karty/d-link-dwa-192-r225 >>>>>>>>>> >>>>>>>>>> https://wikidevi.com/wiki/Edimax_EW-7833UAC >>>>>>>>>> http://www.edimax.com/edimax/download/download/data/edimax/global/downloa... >>>>>>>>>> http://www.edimax.com/edimax/mw/cufiles/files/download/Driver_Utility/EW-... >>>>>>>>>> >>>>>>>>>> https://github.com/pld-linux/rtl8812au >>>>>>>>>> https://github.com/diederikdehaas/rtl8812AU >>>>>>>>>> >>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>>>>>>>>> >>>>>>>>>> $ unzip EW-7833UAC_linux_4.3.21_kernel_3.16-4.4.zip >>>>>>>>>> $ cd EW7833UAC_linux_4.3.21_kernel_3.16-4.4/EW7833UAC_linux_v4.3.21_17997.20160531/ >>>>>>>>>> >>>>>>>>>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/disable-debu... | patch -p1 >>>>>>>>>> $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/e6d6beb.patch | patch -p1 >>>>>>>>>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.7.patch | patch -p1 >>>>>>>>>> $ curl -s https://raw.githubusercontent.com/pld-linux/rtl8812au/master/linux-4.8.patch | patch -p1 >>>>>>>>>> >>>>>>>>>> $ make -j3 >>>>>>>>>> $ su >>>>>>>>>> # cp 8814au.ko /lib/modules/$(uname -r)/updates/ >>>>>>>>>> # depmod >>>>>>>>>> # modinfo 8814au | grep 2001 >>>>>>>>>> >>>>>>>>>> # modprobe -v 8814au >>>>>>>>>> # dmesg: >>>>>>>>>> ... >>>>>>>>>> RTL871X: module init start >>>>>>>>>> RTL871X: rtl8814au v4.3.21_17997.20160531 >>>>>>>>>> RTL871X: build time: Jan 21 2017 20:04:38 >>>>>>>>>> usbcore: registered new interface driver rtl8814au >>>>>>>>>> RTL871X: module init ret=0 >>>>>>>>>> ... >>>>>>>>>> # modprobe -rv 8814au >>>>>>>>>> # dmesg: >>>>>>>>>> ... >>>>>>>>>> RTL871X: module exit start >>>>>>>>>> usbcore: deregistering interface driver rtl8814au >>>>>>>>>> RTL871X: module exit success >>>>>>>>>> ... >>>>>>>>>> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>>>>>>>>> >>>>>>>>>> Wifi ball works now? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> HW add. >>>>>>>>>> https://wikidevi.com/wiki/ASUS_USB-AC68 >>>>>>>>>> https://www.asus.com/Networking/USB-AC68/HelpDesk_Download >>>>>>>>>> >>>>>>>>>> https://wikidevi.com/wiki/TP-LINK_Archer_T9UH >>>>>>>>>> http://www.tp-link.com/en/download/Archer-T9UH.html >>>>>>>>>> >>>>>>>>>> https://wikidevi.com/wiki/TRENDnet_TEW-809UB >>>>>>>>>> https://www.trendnet.com/support/supportdetail.asp?prod=100_TEW-809UB >>>>>>>>>> >>>>>>>>>> SW add. >>>>>>>>>> https://github.com/abperiasamy/rtl8812AU_8821AU_linux >>>>>>>>>> https://github.com/austinmarton/rtl8812au_linux >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> OR >>>>>>>>> according to "rtl8814au? #10" >>>>>>>>> https://github.com/diederikdehaas/rtl8812AU/issues/10 >>>>>>>>> >>>>>>>>> $ git clone -b driver-4.3.21 https://github.com/uminokoe/rtl8812AU.git RTL8814AU-uminokoe >>>>>>>>> $ cd RTL8814AU-uminokoe/ >>>>>>>>> $ git revert -n 9260f77 8d33100 >>>>>>>>> // "Disabled debugging code." >>>>>>>>> $ curl -s https://github.com/diederikdehaas/rtl8812AU/commit/3e80ebc.patch | patch -p1 >>>>>>>>> // Enables CONFIG_MP_VHT_HW_TX_MODE >>>>>>>>> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile >>>>>>>>> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile >>>>>>>>> >>>>>>>>> OR >>>>>>>>> $ git clone https://github.com/diederikdehaas/rtl8814AU.git RTL8814AU-diederikdehaas >>>>>>>>> $ cd RTL8814AU-diederikdehaas/ >>>>>>>>> // Adds missing Vendor/Product ID >>>>>>>>> $ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A}, /* Edimax - Edimax */' os_dep/linux/usb_intf.c >>>>>>>>> // "Added VHT capabilities." >>>>>>>>> $ curl -s https://github.com/uminokoe/rtl8812AU/commit/5f75242.patch | patch -p1 >>>>>>>>> // Enables CONFIG_MP_VHT_HW_TX_MODE >>>>>>>>> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/n/y/' Makefile >>>>>>>>> $ sed -i '/CONFIG_MP_VHT_HW_TX_MODE/s/#//' Makefile >>>>>>>>> >>>>>>>>> >>>>>>>>> $ make -j3 >>>>>>>>> $ su >>>>>>>>> # cp 8814au.ko /lib/modules/$(uname -r)/updates/ >>>>>>>>> # depmod >>>>>>>>> # modinfo 8814au >>>>>>>>> >>>>>>>>> # modprobe -v 8814au >>>>>>>>> # dmesg: >>>>>>>>> ... >>>>>>>>> RTL871X: module init start >>>>>>>>> RTL871X: rtl8814au v4.3.21_17997.20160531 >>>>>>>>> usbcore: registered new interface driver rtl8814au >>>>>>>>> RTL871X: module init ret=0 >>>>>>>>> ... >>>>>>>>> # modprobe -rv 8814au >>>>>>>>> # dmesg: >>>>>>>>> ... >>>>>>>>> RTL871X: module exit start >>>>>>>>> usbcore: deregistering interface driver rtl8814au >>>>>>>>> RTL871X: module exit success >>>>>>>>> ... >>>>>>>>> >>>>>>>>> >>>>>>>>> Hello Diederik, >>>>>>>>> it seems there are only two Linux RTL8814AU users, so far. >>>>>>>>> >>>>>>>>> Morris, when you catch some time, would you mind to run a couple iperf tests with DWA-192, >>>>>>>>> to see real network throughput results. >>>>>>>> I can't run any at the moment because Fedora is refusing to actually use >>>>>>>> the device at all. >>>>>>>> >>>>>>>> I have also just upgraded to F25 and nothing has changed. >>>>>>>> >>>>>>>> The last time I used this device was on 08/10/2016 and it was using the >>>>>>>> ATH9K driver. The main reason I upgraded to this USB device was that I >>>>>>>> upgraded my router to a faster version, and I found that unlike the >>>>>>>> DWA182 I didn't have to compile my own driver, the kernel had inbuilt >>>>>>>> support for the DWA192. >>>>>>>> >>>>>>>> It is possible that I have managed to Blacklist the device in some way, >>>>>>>> not by the conventional Blacklist.conf, and I have forgotten how so I >>>>>>>> can't find where I've done it to reverse it. >>>>>>>> >>>>>>>> Also, having never done it before, I also don't know how to run iperf tests. >>>>>>>> >>>>>>>> regards, >>>>>>>> Steve >>>>>>>> >>>>>>> Did I understand you correctly, what you're saying here is that: >>>>>>> D-Link DWA-192 - Realtek RTL8814AU WiFi USB 3.0 >>>>>>> therefore the USB based device, was driven by: >>>>>>> $ modinfo --description ath9k >>>>>>> Support for Atheros 802.11n wireless LAN cards. >>>>>>> https://wireless.wiki.kernel.org/en/users/drivers/ath9k >>>>>>> "ath9k is a completely FOSS wireless driver for all Atheros IEEE 802.11n PCI/PCI-Express and AHB WLAN based chipsets." >>>>>>> https://wiki.debian.org/ath9k >>>>>>> "Atheros 802.11n PCI/PCI-E devices (ath9k)" >>>>>> Yes, when the device was working iwconfig reported the driver as being >>>>>> ATH9K, but if refused to use the 5GHz channel. Following a suggestion on >>>>>> this list I tried compiling my own kernel and setting a recommended >>>>>> flag, but that had no effect on its ability to use the 5GHz channel. It >>>>>> was from compiling my own kernel I found that it looked like the ATH10K >>>>>> driver would support the 5GHz channel, which Winfried de Heiden is >>>>>> confirming, so at the time I couldn't work out why the system wasn't >>>>>> assigning the ATH10K driver instead of the ATH9K driver. >>>>>> From what you are saying it sounds like that various updates to F24 >>>>>> (and in F25 which I am using now) have changed the functionality of >>>>>> ATH9K to not support USB devices, which would potentially go a long way >>>>>> towards explaining why my adapter is no longer recognized any more. >>>>>> Also it seems to me that you are suggesting that I need to go back to >>>>>> compiling a driver for this card again (if I have to do this will the >>>>>> driver support the 5GHz channel), if this is so given that from when I >>>>>> first started using this adapter up until 08/10/2016 there was native >>>>>> support in the kernel for the device, why has this support been dropped? >>>>>> I first started using this adapter in F23. >>>>>> >>>>>> regards, >>>>>> Steve >>>>> This should show the WiFi devices that are connected to the machine: >>>>> $ echo ; lspci -knn -d ::0280 ; echo ; lsusb ; echo ; lsusb -t ; echo >>>>> >>>>> Would you mind copy and paste the output here. >>>> I have input the commands and the output is listed below. >>>> >>>> echo ; lspci -knn -d ::0280 ; echo ; lsusb ; echo ; lsusb -t ; echo >>>> >>>> >>>> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver >>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> Bus 004 Device 002: ID 045e:0750 Microsoft Corp. Wired Keyboard 600 >>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>>> Bus 011 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >>>> Bus 010 Device 002: ID 2001:331a D-Link Corp. >>>> Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub >>>> Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>>> >>>> /: Bus 11.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M >>>> /: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M >>>> |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 480M >>>> /: Bus 09.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M >>>> /: Bus 08.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M >>>> /: Bus 07.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/4p, 12M >>>> /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/2p, 12M >>>> /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M >>>> |__ Port 2: Dev 2, If 0, Class=Human Interface Device, >>>> Driver=usbhid, 12M >>>> |__ Port 2: Dev 2, If 1, Class=Human Interface Device, >>>> Driver=usbhid, 12M >>>> |__ Port 2: Dev 2, If 2, Class=Human Interface Device, >>>> Driver=usbhid, 12M >>>> /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ohci-pci/5p, 12M >>>> |__ Port 1: Dev 2, If 0, Class=Human Interface Device, >>>> Driver=usbhid, 1.5M >>>> |__ Port 1: Dev 2, If 1, Class=Human Interface Device, >>>> Driver=usbhid, 1.5M >>>> /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/4p, 480M >>>> /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M >>>> /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/5p, 480M >>>> >>>> Bus 010 Device 002 is the usb wifi adapter that is not recognized anymore. >>> Bus 10 Device 2 >>> >>> lsusb: >>> Bus 010 Device 002: ID 2001:331a D-Link Corp. >>> >>> lsusb -t: >>> /: Bus 10.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M >>> |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=, 480M >>> >>> >>> 8814au.ko when built, installed and loaded, >>> should show up as assigned to the device: >>> >>> /: Bus 10 [...] >>> |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=8814au, 480M >> I can rebuild that driver like I was with the DWA-182 usb device when I >> had it, but when I purchased the DWA-192, under Fedora 23 there was >> native support for DWA-192 in the kernel, hence I did not have to >> compile a driver anymore. At the time I also raised a Bugzilla around >> the fact that the ATH9K driver (which is the driver the commands I >> issued at the time, that I was advised to on this list, told me was the >> one being used) did not provide access to the 5 GHz channel. That driver >> was being used through F23 and F24, or at least native kernel support, >> was provided up until 08/10/2016 at which time I switched over to an >> Ethernet Home Plug interface to networking (this was because the device >> became problematic in retaining connection to the network). >> Now that I have switched back to the wifi device, because even on the >> 2.4 GHz channel this wifi device is faster than the Ethernet device, I >> have found that the DWA-192 device appears to no longer be supported >> natively by the kernel. >> Why has support for this device been removed from the kernel? As a side >> issue to this, I have also noticed that this device has exactly the same >> non-support issue under Ubuntu 16.10. >> > > "Dlink DWA-192 not Properly Supported" > https://bugzilla.redhat.com/show_bug.cgi?id=1346465 > Apparently Fedora Kernel Team know less than you there ;) > > Morris, would you mind try to read the following lines with care and understanding; > > = DWA-192 win driver location: > http://support.dlink.com/ProductInfo.aspx?m=DWA-192#Download > ftp://ftp2.dlink.com/PRODUCTS/DWA-192/REVA/DWA-192_REVA_DRIVERS_1.03.B04_... > > = A brief review of the aforementioned driver, > part of the installation via Wine - https://winehq.org > > $ unzip DWA-192_REVA_DRIVERS_1.03.B04_WIN.ZIP > $ wine DWA-192_V1.03b04/Setup.exe > ... > See "Wine installation RTL8814AU D-Link DWA-192.png" (attachment) > ... > $ dos2unix < ~/.wine/dosdevices/c\:/Program\ Files/D-Link/DWA-192/Drivers/Win7x86/D_netrtwlanu.inf | grep '8814AU\|2001\|331A' > %DWA-192_331A.DeviceDesc% = RTL8814auDLink.ndi, USB\VID_2001&PID_331A > ;; Dlink 8814AU installation > DWA-192_331A.DeviceDesc = "D-Link DWA-192 AC1900 Wi-Fi USB 3.0 Adapter" > DWA-192_331A.DeviceDesc.DispName = "D-Link DWA-192 AC1900 Wi-Fi USB 3.0 Adapter" > > = Conclusion: > D-Link DWA-192 AC1900 Wi-Fi USB 3.0 Adapter -is- related to Realtek RTL8814AU 4T4R 802.11ac, USB 3.0 Chipset, > which again correlates with the Linux kernel case - 8814au.ko. > > ~~~~~ > > "Dlink DWA192 Partially Supported in Kernel?" > https://lists.fedoraproject.org/archives/list/users%40lists.fedoraproject... > What you mentioned in this thread - "4.3.5-300 kernel", can be found here: > https://kojipkgs.fedoraproject.org/packages/kernel/4.3.5/300.fc23/x86_64/ > > "kernel-core-4.3.5-300.fc23.x86_64.rpm" and "kernel-modules-4.3.5-300.fc23.x86_64.rpm" > are sufficient for the installation and testing: > # rpm -ivh --oldpackage kernel-*-4.3.5-300.fc23.x86_64.rpm > so that we can examine the output of: > $ networkctl status <IFNAME> > to see the driver assigned to the device > Of course you can repeat: > $ echo ; lspci -knn -d ::0280 ; echo ; lsusb ; echo ; lsusb -t ; echo > and paste the output here, also. > > ~~~~~ > > What you also mentioned in the above-mentioned thread - [...]VNAIKQSTZVULRQKBYR5EDDOMBWRYWXXI > is the name assigned to the device - wlp4s6, which really does not correlates with the naming scheme, explained here: > "How does the new naming scheme look like, precisely?" > https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInter... > https://github.com/systemd/systemd/blob/master/src/udev/udev-builtin-net_... > i.e. "wlp4s6" seems to be a PCI based device, however D-Link DWA-192 is the USB based device. Just further to my previous email, I have compiled the 8814au driver following your instructions above and that has created device wlp3s0u2, but the network is unable to activate it. The messages from dmesg are as follows (what I haven't determined yet is whether or not the failure is because I am currently using the ethernet interface). [ 1363.001100] usb 10-1: USB disconnect, device number 2 [ 1366.435600] usb 10-2: new high-speed USB device number 3 using xhci_hcd [ 1366.604162] usb 10-2: New USB device found, idVendor=2001, idProduct=331a [ 1366.604166] usb 10-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1366.604169] usb 10-2: Product: 11ac Adapter [ 1366.604172] usb 10-2: Manufacturer: Realtek [ 1366.604175] usb 10-2: SerialNumber: 123456 [ 6094.157799] RTL871X: module init start [ 6094.157802] RTL871X: rtl8814au v4.3.21_17997.20160531 [ 6094.298894] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=6c:72:20:00:ac:c4 [ 6094.299451] usbcore: registered new interface driver rtl8814au [ 6094.299452] RTL871X: module init ret=0 [ 6094.384280] rtl8814au 10-2:1.0 wlp3s0u2: renamed from wlan0 [ 6094.404086] IPv6: ADDRCONF(NETDEV_UP): wlp3s0u2: link is not ready [ 6094.880887] IPv6: ADDRCONF(NETDEV_UP): wlp3s0u2: link is not ready [ 6094.888146] IPv6: ADDRCONF(NETDEV_UP): wlp3s0u2: link is not ready [ 6094.940359] IPv6: ADDRCONF(NETDEV_UP): wlp3s0u2: link is not ready [ 6095.058090] IPv6: ADDRCONF(NETDEV_UP): wlp3s0u2: link is not ready [ 6095.244405] RTL871X: assoc success [ 6095.244668] RTL871X: set group key camid:1, addr:00:00:00:00:00:00, kid:1, type:TKIP [ 6095.245211] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0u2: link becomes ready One question I have, in the 8814 instructions above you mentioned: // Adds missing Vendor/Product ID $ sed -i '/0xA834/ a\\t{USB_DEVICE(0x7392, 0xA833), .driver_info = RTL8814A}, /* Edimax - Edimax */' os_dep/linux/usb_intf.c Should the values inside the USB_DEVICE brackets be the idVendor and idProduct numbers mentioned in the dmesg output above? regards, Steve

7 years, 2 months

4
20
0 / 0