Re: problems creating a new user
by Frank McCormick
On 2018-12-20 10:54 p.m., Samuel Sieb wrote:
> On 12/20/18 7:49 PM, Frank McCormick wrote:
>> On 2018-12-20 10:22 p.m., Samuel Sieb wrote:
>>> ctrl-alt-backspace needs to be enabled as well. Gnome appears to
>>> have a setting to turn it on, but I've used the following snippet to
>>> enable it across desktop environments:
>>> # cat /etc/X11/xorg.conf.d/99-zap.conf
>>
>>> Section "ServerFlags"
>>> Option "DontZap" "false"
>>> EndSection
>>>
>>> Section "InputClass"
>>> Identifier "Keyboard Defaults"
>>> MatchIsKeyboard "yes"
>>> Option "XkbOptions" "terminate:ctrl_alt_bksp"
>>> EndSection
>>
>> So both those sections have to be put into 99-zap.conf ?
>
> Yes, the first one turns on the option, the second one sets the key
> combo.
Yes, works fine. Thanks
5 years, 3 months
Re: problems creating a new user
by Frank McCormick
On 2018-12-20 10:22 p.m., Samuel Sieb wrote:
> On 12/20/18 3:36 PM, Frank McCormick wrote:
>> A related question: how do I set up Fedora to allow the alt-sysreq
>> REISUB
>> to kill the session? And I also thought alt-ctrl-backspace killed the
>
> https://fedoraproject.org/wiki/QA/Sysrq
That solved it for me. Thanks
>
>> xserver. It > doesn't for me.
>
> ctrl-alt-backspace needs to be enabled as well. Gnome appears to have
> a setting to turn it on, but I've used the following snippet to enable
> it across desktop environments:
> # cat /etc/X11/xorg.conf.d/99-zap.conf
> Section "ServerFlags"
> Option "DontZap" "false"
> EndSection
>
> Section "InputClass"
> Identifier "Keyboard Defaults"
> MatchIsKeyboard "yes"
> Option "XkbOptions" "terminate:ctrl_alt_bksp"
> EndSection
So both those sections have to be put into 99-zap.conf ?
Thanks
5 years, 3 months
Re: problems creating a new user
by Frank McCormick
On 2018-12-20 4:36 p.m., Samuel Sieb wrote:
> On 12/20/18 8:09 AM, Frank McCormick wrote:
>> I am running Fedora 29 with the Mate desktop. This morning I tried
>> creating a
>> new user to check out a problem. After logging out and logging in again
>> with the new users name and password, I was presented with a blank
>> screen
>> with just the mouse cursor visible.
>
> It sounds like Mate isn't starting for some reason. Did you check the
> logs?
Not only did Mate not start, I could not find a way out other than
killing the power.
Nothing in all the logs I could read, but .xsession-errors had an entry
reading something
like "environment could not be loaded". I have since deleted that
user, and created another which works fine. The only difference was
allowing the GUI to
create a user group the same as the user name. The user was named guest,
and it created
a group called guest and made the user part of it.
>
>> I checked the new users directory after logging in with my regular
>> account, and there are just a few sub directories but I noticed that
>> there was no /Desktop. no /Pictures etc.
>
> Those are created by the desktop environment.
That's what I suspected, and I guess to be expected if Mate couldn't load
the proper environment.
It's a mystery to me why the second attempt was sucessfull while the first
wasn't.
A related question: how do I set up Fedora to allow the alt-sysreq REISUB
to kill the session? And I also thought alt-ctrl-backspace killed the
xserver. It
doesn't for me.
Still finding my way around Fedora after having been gone for a year or two.
> _______________________________________________
> users mailing list -- users(a)lists.fedoraproject.org
> To unsubscribe send an email to users-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
> https://lists.fedoraproject.org/archives/list/users@lists.fedoraproject.org
5 years, 3 months
problems creating a new user
by Frank McCormick
I am running Fedora 29 with the Mate desktop. This morning I tried
creating a
new user to check out a problem. After logging out and logging in again
with the new users name and password, I was presented with a blank screen
with just the mouse cursor visible.
I deleted that user then created a second new user but got the
same results.
I checked the new users directory after logging in with my regular
account, and there are just a few sub directories but I noticed that
there was no /Desktop. no /Pictures etc.
Has anybody else experienced this problem ?
Any suggestions?
5 years, 3 months
Software for streaming audio or video over LAN
by Marko Vojinovic
Hello everybody,
Huh, it's been a while... :-)
I'm interested in your suggestions/experience regarding multimedia
tools for streaming audio and possibly also video via LAN (mostly WiFi),
played back on multiple client machines, with little to no latency.
You know --- say I want to play some music on my laptop in the living
room, and I want to hear the same thing play on another computer in the
kitchen, and another one in the garage, etc... ;-)
Ideally, it should be low-latency, in the sense that playback should be
synchronized across devices. Like, if two machines are playing in two
rooms, and I'm in the hallway in between them, I shouldn't hear any
offset between the two playbacks.
I'm looking for Linux-centric solutions in general, but mostly from
Fedora or CentOS land. It should do audio, while video would probably
depend on the WiFi speed, I guess.
So far, I've been thinking of a DIY combination of bash scripts and
mplayer, but I guess it's easier to try out something that someone
already made, before I end up mocking up the whole thing from scratch
myself.
Looking for any pointers and suggestions (including keywords for
google). ;-)
TIA, :-)
Marko
5 years, 3 months
OT: Fedora Interactive boot option...
by Michael D. Setzer II
Long ago Redhat and early Fedora versions had the option of pressing the
letter i at boot to have it request for loading of the individual kernel options.
Used it long ago, but haven't seen it for a long time, and search show the old
one, but not how it was done, or if it was something only on the redhat.
Have a project that I have handled since 2004, and it works fine using
kernel.org source code to build on versions up to my current Fedora 28
system.
Have an user with an IBM Thinkpad t440p and it freezes with all 5 of the
kernels that are included, plus with safe mode options, and debug options.
Originally, the last message was about ata8 device. Built a special kernel
with all ata modules removed, and lock just showed a different last message,
so am thinking it is what loads next that is freezing.
Looked thru the kernel options, and don't see anything about an interactive
option.
Just wondering if someone might know how that interactive boot process was
done.
Thanks.
+------------------------------------------------------------+
Michael D. Setzer II - Computer Science Instructor (Retired)
mailto:mikes@guam.net
mailto:msetzerii@gmail.com
Guam - Where America's Day Begins
G4L Disk Imaging Project maintainer
http://sourceforge.net/projects/g4l/
+------------------------------------------------------------+
http://setiathome.berkeley.edu (Original)
Number of Seti Units Returned: 19,471
Processing time: 32 years, 290 days, 12 hours, 58 minutes
(Total Hours: 287,489)
BOINC@HOME CREDITS
ROSETTA 66255811.060917 | ABC 16613838.513356
SETI 109742178.651890 | EINSTEIN 141783847.999240
5 years, 3 months
Problems with Fedora 29 on my hardware
by Mr Brian Domenick
Hi,
I have a 15 inch HP Spectre 360 running Fedora 28, it runs fine using
nouveau video and wireless works. I tried to upgrade to Fedora 29. After
upgrade with dnf it is fairly broken. Everything came up on the surface,
but it was sluggish and sudo bash was very slow to authenticate and it
was popping multiple oops messages at the top of the screen. I then did
a fresh install of Fedora 29. This seemed to mostly work and no
immediate sluggishness once done. I then upgraded using dnf to the
latest software. This is where the bad behavior came from. After dnf
upgrade sluggishness on sudo again as opposed to instantaneous
authentication before dnf, wifi could now not be shut off. Oops messages
on top of screen and complaining about one of the cpu's in dmesg and
also complaining about Noveau. Wifi became broken and gnome network
manager to shut it off wouldn't do anything. The icon showed as up with
signal but a browser wouldn't work. When it popped up report screen to
report kernel problem it was populated with no info and all you could
really do was close it. Funny thing is I did a fresh install of 29 first
on my Samsung laptop which has strictly intel graphics and different
wireless and everything works 100% on that laptop.
Thanks, any thoughts would be appreciated, I put Fedora 28 back on the
HP and its fine with all the latest software there.
Brian
5 years, 3 months
ACPI errors (was: f24 boot fails; need help).
by William
Good evening,
One of the problems reported in the log file "rdsosreport.txt" generated
by the failed boots discussed in the "f24 boot fails; need help" topic
was a set of "ACPI" errors. Here are the relevant lines (with added
line numbers) from that log file (the first and last lines are just for
context):
----------
862 [ 1.218683] coyote kernel: ata4: SATA link up 1.5 Gbps
(SStatus 113 SControl 300)
863 [ 1.218927] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
864 [ 1.219196] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff92ef8e0db488), AE_NOT_FOUND
(20160930/psparse-543)
865 [ 1.219856] coyote kernel: ata2.00: ATA-8:
ST2000DM001-1CH164, CC24, max UDMA/133
866 [ 1.220017] coyote kernel: ata2.00: 3907029168 sectors, multi
16: LBA48 NCQ (depth 31/32), AA
867 [ 1.220812] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
868 [ 1.221100] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff92ef8e0db488), AE_NOT_FOUND
(20160930/psparse-543)
869 [ 1.221620] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
870 [ 1.221909] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff92ef8e0dbac8), AE_NOT_FOUND
(20160930/psparse-543)
871 [ 1.222200] coyote kernel: ata6.00: ATAPI: HL-DT-ST BD-RE
BH14NS40, 1.00, max UDMA/100
872 [ 1.222374] coyote kernel: ata2.00: configured for UDMA/133
873 [ 1.222582] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
874 [ 1.222908] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff92ef8e0db348), AE_NOT_FOUND
(20160930/psparse-543)
875 [ 1.222919] coyote kernel: scsi 1:0:0:0: Direct-Access
ATA ST2000DM001-1CH1 CC24 PQ: 0 ANSI: 5
876 [ 1.223466] coyote kernel: ata4.00: ATAPI: PIONEER BD-RW
BDR-208M, 1.10, max UDMA/100
877 [ 1.226360] coyote kernel: ata7: SATA link down (SStatus 0
SControl 300)
878 [ 1.226407] coyote kernel: ata9: SATA link down (SStatus 0
SControl 300)
879 [ 1.226501] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
880 [ 1.226507] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff92ef8e0dbac8), AE_NOT_FOUND
(20160930/psparse-543)
881 [ 1.226519] coyote kernel: ata6.00: configured for UDMA/100
882 [ 1.227197] coyote kernel: ACPI Error: [DSSP] Namespace
lookup failure, AE_NOT_FOUND (20160930/psargs-359)
883 [ 1.227204] coyote kernel: ACPI Error: Method parse/execution
failed [\_SB.PCI0.SAT0.SPT3._GTF] (Node ffff92ef8e0db348), AE_NOT_FOUND
(20160930/psparse-543)
884 [ 1.227217] coyote kernel: ata4.00: configured for UDMA/100
----------
What is this all about? Is this a real problem or a false alarm? How
do I fix it?
thanks,
Bill.
5 years, 3 months
hplip
by Patrick Dupre
Hello,
Here are some errors that I got:
dnf update
Last metadata expiration check: 1:43:32 ago on Mon 17 Dec 2018 08:55:07 PM CET.
Dependencies resolved.
Problem 1: cannot install the best update candidate for package hplip-3.18.3-1.fc28.x86_64
- nothing provides libnetsnmp.so.35()(64bit) needed by hplip-3.18.6-11.fc28.x86_64
Problem 2: cannot install the best update candidate for package hplip-libs-3.18.3-1.fc28.x86_64
- nothing provides libnetsnmp.so.35()(64bit) needed by hplip-libs-3.18.6-11.fc28.x86_64
Problem 3: problem with installed package hplip-libs-3.18.3-1.fc28.x86_64
- package hplip-libs-3.18.3-1.fc28.x86_64 requires hplip-common(x86-64) = 3.18.3-1.fc28, but none of the providers can be installed
- cannot install both hplip-common-3.18.6-11.fc28.x86_64 and hplip-common-3.18.3-1.fc28.x86_64
- cannot install both hplip-common-3.18.3-1.fc28.x86_64 and hplip-common-3.18.6-11.fc28.x86_64
- cannot install the best update candidate for package hplip-common-3.18.3-1.fc28.x86_64
- nothing provides libnetsnmp.so.35()(64bit) needed by hplip-libs-3.18.6-11.fc28.x86_64
================================================================================
Package Arch Version Repository Size
================================================================================
Skipping packages with conflicts:
(add '--best --allowerasing' to command line to force their upgrade):
hplip-common x86_64 3.18.6-11.fc28 updates 110 k
Skipping packages with broken dependencies:
hplip x86_64 3.18.6-11.fc28 updates 16 M
hplip-libs x86_64 3.18.6-11.fc28 updates 204 k
Transaction Summary
================================================================================
Skip 3 Packages
Nothing to do.
Complete!
and
dnf update --best --allowerasing
Last metadata expiration check: 1:43:40 ago on Mon 17 Dec 2018 08:55:07 PM CET.
Error:
Problem 1: problem with installed package hplip-libs-3.18.3-1.fc28.x86_64
- cannot install the best update candidate for package hplip-libs-3.18.3-1.fc28.x86_64
- nothing provides libnetsnmp.so.35()(64bit) needed by hplip-libs-3.18.6-11.fc28.x86_64
Problem 2: problem with installed package hplip-3.18.3-1.fc28.x86_64
- cannot install the best update candidate for package hplip-3.18.3-1.fc28.x86_64
- nothing provides libnetsnmp.so.35()(64bit) needed by hplip-3.18.6-11.fc28.x86_64
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire de Physico-Chimie de l'Atmosphère | |
Université du Littoral-Côte d'Opale | |
===========================================================================
5 years, 3 months