caja mount of network drives
by Robert McBroom
When I look where caja used to mount network drives I see
/run/user/1001:
/usr/bin/ls: cannot access '/run/user/1001/./doc': Permission denied
/usr/bin/ls: cannot access '/run/user/1001/./gvfs': Permission denied
total used in directory 4 available 358772
drwx------. 9 rm3 rm3 280 Jun 17 23:25 .
drwxr-xr-x. 3 root root 60 Jun 17 01:17 ..
srw-rw-rw-. 1 rm3 rm3 0 Jun 17 01:17 bus
drwx------. 3 rm3 rm3 60 Jun 17 01:17 dbus-1
drwx------. 2 rm3 rm3 60 Jun 17 07:38 dconf
d?????????? ? ? ? ? ? doc
d?????????? ? ? ? ? ? gvfs
srw-------. 1 rm3 rm3 0 Jun 17 07:34 kdeinit5__0
drwx------. 2 rm3 rm3 60 Jun 17 07:35 keyring
srwxrwxr-x. 1 rm3 rm3 0 Jun 17 01:17 klauncherTJ1413.1.slave-socket
srwxrwxr-x. 1 rm3 rm3 0 Jun 17 07:34 klauncherTJ7613.1.slave-socket
-rw-rw-r--. 1 rm3 rm3 67 Jun 17 07:34 KSMserver__0
drwx------. 2 rm3 rm3 80 Jun 17 01:18 pulse
drwxr-xr-x. 3 rm3 rm3 100 Jun 17 01:17 systemd
Robert
5 years, 9 months
Redshift has an issue with geoclue2
by ToddAndMargo
Hi All,
Fedora 28, x64
redshift-gtk-1.11-8.fc28.x86_64
redshift-1.11-8.fc28.x86_64
geoclue2-libs-2.4.10-2.fc28.x86_64
geoclue2-2.4.10-2.fc28.x86_64
When starting Redshift, I get the following error
$ redshift
Trying location provider `geoclue2'...
Using provider `geoclue2'.
Unable to start GeoClue client:
GDBus.Error:org.freedesktop.DBus.Error.NoReply: Message
recipient disconnected from message bus without replying.
Unable to connect to GeoClue.
Unable to get location from provider.
the pop up says:
GDBus.Error" org.freedesktop.DBus.Error.AccessDenied
Any word of wisdom? It worked under Fedora 27.
-T
5 years, 9 months
Fedora's OwnCloud and NextCloud Broke - What I did
by Clifford Snow
When I upgraded to F28, OwnCloud stopped working. Another reported the same
problem with NextCloud. The problem has been reported in bugzilla [1] as
Cannot login after upgrading from F27 to F28. Patrick Reeb provided a fix
with a fix-owncloud [2] script which downgrades php-sabre to F25.
Because both of the Fedora packages of OwnCloud and NextCloud are dated I
decided to use the NextCloud zip package of their current version 13.
Basically what I did was to install Fedora's NextCloud package to get the
basic configuration files and then removed the package so all what was left
was configuration files with a .rpmsave extension. Using the
nextcloud-13.0.4.zip package [3] I moved the files to my nextcloud
directory from the Fedora's package.
After a few tweaks to /etc/httpd/conf/httpd.conf files, the login prompt
appeared on my localhost/nextcloud. I was unable to configure my
postgresql database from the web browser, so I used the command line tool
[4] (occ) to finish the install.
I did try the snap install of the nextcloud-server, but couldn't get it to
work. However, the snap nextcloud-client works like a charm.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1562949
[2] https://bugzilla.redhat.com/attachment.cgi?id=1431595
[3] https://nextcloud.com/install/#instructions-server
[4] https://nextcloud.com/install/#instructions-server
--
@osm_seattle
osm_seattle.snowandsnow.us
OpenStreetMap: Maps with a human touch
5 years, 9 months
systemd sucks... one more time!
by François Patte
Bonjour,
I just added a crypted partition on my laptop (/home ans swap are
crypted and until now no problem had occured with them) and this new
partition is not mounted at boot, it is only to be mounted by user on
demand.
The whole install of this partition, went without any problems: it could
be unlocked and mounted and unmounted and locked by the user without any
problem, BUT while rebooting the laptop the boot process is blocked by
"a start job is running for dev-mapper-chiffre.device (no limit)".
What is this start job, I don't know! Why is it running, I don't
know.... How to recover, I don't know...
There always some problems with start/stop jobs which are running at
boot or shutdown times.
So what can I do to have a NORMAL boot?
Thank you.
--
François Patte
UFR de mathématiques et informatique
Laboratoire CNRS MAP5, UMR 8145
Université Paris Descartes
45, rue des Saints Pères
F-75270 Paris Cedex 06
Tél. +33 (0)6 7892 5822
http://www.math-info.univ-paris5.fr/~patte
5 years, 9 months
F28 suspend
by Berend De Schouwer
I've got a laptop that has started misbehaving on suspend.
About 1 in 10 suspends the laptop fails to fully suspend. It switches
mostly off (screen off, etc.) but some of the motherboard keeps
running. I know some of the motherboard keeps running because:
- the wifi light remains on
- the laptop will get hot because the fans don't start
The laptop does not respond to the power button to wake up. It's
necessary to force halt & reboot the laptop by holding the power button
down for a few seconds.
9 out of 10 times suspend works fine.
This appears to be a BIOS or kernel issue, since the last entries in
the logs are:
May 29 09:02:17 sieve-deschouwer-co-za systemd[1]: Reached target
Sleep.
May 29 09:02:17 sieve-deschouwer-co-za systemd[1]: Starting Suspend...
May 29 09:02:17 sieve-deschouwer-co-za systemd-sleep[21435]: Suspending
system...
May 29 09:02:17 sieve-deschouwer-co-za kernel: PM: suspend entry (deep)
-- Reboot --
On a successful suspend I will additionally get:
May 29 08:21:32 sieve-deschouwer-co-za kernel: PM: Syncing filesystems
... done.
This started at the same time as I upgraded to F28. The laptop has
previously worked fine since F24 or F25, or maybe earlier.
It's happened with a few different F28 kernel patchlevels.
product: HP ProBook 450 G2 (L8A81ES#ACQ)
model name : Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI
(rev 09)
Linux sieve-deschouwer-co-za 4.16.11-300.fc28.x86_64 #1 SMP Tue May 22
18:29:09 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
Can anyone help me debug before I enter a bugzilla?
Berend
5 years, 9 months
Createrepeo faild with error on Fedora 28
by Danishka Navin
Hi,
I noticed that createrepo failed on Fedora 28 under SELinux permissive as
well.
createrepo /data/dist/localrepo/h28/norach/
Spawning worker 0 with 1 pkgs
Spawning worker 1 with 1 pkgs
Worker 0: Error: Could not open local rpm file:
/data/dist/localrepo/h28/norach//generic-logos-18.0.0-900.fc28.noarch.rpm:
RPM Error opening Package
Worker 1: Error: Could not open local rpm file:
/data/dist/localrepo/h28/norach//generic-logos-httpd-18.0.0-900.fc28.noarch.rpm:
RPM Error opening Package
Workers Finished
Failed to process 2 package(s).
[root@hanthana localrepo]# ls -l /data/dist/localrepo/h28/norach/
total 12
-rw-r--r--. 1 root root 131 Jun 22 21:09
generic-logos-18.0.0-900.fc28.noarch.rpm
-rw-r--r--. 1 root root 130 Jun 22 21:09
generic-logos-httpd-18.0.0-900.fc28.noarch.rpm
drwxr-xr-x. 2 root root 4096 Jun 22 21:14 repodata
Appreciate if someone can support.
--
Danishka Navin
http://danishkanavin.blogspot.com
http://twitter.com/danishkanavin
5 years, 9 months
problem with cups-pdf and spool directory under wine
by Saša Janiška
Hello,
I've one application which does run under wine and would like to print
its output to PDF. Attempt to filter output to PDF did not work I've
found out about cups-pdf. After installing it, attempt to print was
generating SELinux alerts which I solved (I belive) by following hints
and issuing:
$ sudo ausearch -c 'cups-pdf' --raw | audit2allow -M my-cupspdf
$ sudo semodule -X 300 -i my-cupspdf.pp
Now, there are no more alerts, but where is the output?
I've the following in my /etc/cups/cups-pdf.conf:
Out ${DESKTOP}
but the output is generated in:
/var/spool/cups
so, I do wonder why the setting from *.conf file above is not honoured?
/var/spool/cups is 710 root:lp
while
/var/sppol/cups-pdf is 755 root:root
Moreover, status for cups service gives:
systemctl status cups
● cups.service - CUPS Scheduler
Loaded: loaded (/usr/lib/systemd/system/cups.service; enabled; vendor preset: disabled)
Active: active (running) since Wed 2018-06-20 08:36:53 CEST; 11min ago
Docs: man:cupsd(8)
Main PID: 7571 (cupsd)
Status: "Scheduler is running..."
Tasks: 1 (limit: 4915)
Memory: 2.8M
CGroup: /system.slice/cups.service
└─7571 /usr/sbin/cupsd -l
lip 20 08:36:53 mydomain.dyndns.net systemd[1]: Starting CUPS Scheduler...
lip 20 08:36:53 mydomain.dyndns.net cupsd[7571]: Filter "pstopdf" not found.
lip 20 08:36:53 mydomain.dyndns.net systemd[1]: Started CUPS Scheduler.
so I also wonder if this is OK?
What do I miss?
Can someone provide some hints what is the best way to achieve
print-to-pdf under wine on Fedora (fc28)?
Sincerely,
Gour
--
It is far better to discharge one's prescribed duties, even though
faultily, than another's duties perfectly. Destruction in the course
of performing one's own duty is better than engaging in another's duties,
for to follow another's path is dangerous.
5 years, 9 months
offtopic -- remote sysadmin ??
by bruce
Hi.
Been reviewing/looking over various sysadmin related vids/sites for
setting up a complete test website.
I'm trying to find a "remote" sysadmin resource that I can talk
to/work with for a small project to setup/run a test website that's
publicly accessible.
Looking to :
-setup up basic/test site
-correctly handle apache/httpd.conf file
-correctly setup the access process/files for the web doc dir(s)
-setup selinux/perms/access process
-setup firewall
-setup dns
-setup test mysql as well as test firewall rules
-handle firewall rules for ssh
-setup ddos/cloudflare
-setup required users/perms/acls
-anything else???
Working with a skilled sysadmin this should be a quick process. Also
working with a person online/together would allow me to quickly dodge
any user screwups.
So if you know of someone, or if you're interested hit me up for a
short conversation.
Thanks
-bruce
5 years, 9 months