Can't boot into emergency mode to perform lvresize
by cen
Hi
I want to decrease the size of my home partition and increase the root
partition using lvresize. if I understand correctly, I should boot into
emergency mode so home is not mounted. I followed the documentation,
adding systemd.unit=emergency.target to linux16 entry but system just
slowly loads and freezes at fedora logo. I left it for a few minutes,
nothing happens.
Best regards, cen
5 years, 2 months
mount exfat -
by Bob Goodwin
This is an updated Fedora29 workstation and I think I've installed
thetwo required exfat app's via dnf.
I would like to list the contents of a Western Digital MyBook external
drive that uses "exfat." Apparently it feels abused by the user when
unmounted.
[root@Box83 bobg]# mount -t exfat /dev/sdc1 /mnt/test -o nonempty
FUSE exfat 1.3.0
WARN: volume was not unmounted cleanly.
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
Perhaps I am not entering the commend correctly?
[root@Box83 bobg]# mount -o nonempty -t exfat /dev/sdc1 /mnt/test
FUSE exfat 1.3.0
WARN: volume was not unmounted cleanly.
fuse: mountpoint is not empty
fuse: if you are sure this is safe, use the 'nonempty' mount option
What is wrong?
--
Bob Goodwin - Zuni, Virginia, USA
http://www.qrz.com/db/W2BOD
box83 FEDORA-29/64bit LINUX XFCE Fastmail POP3
5 years, 2 months
container / can't connect to localhost via Firefox - logs:
s6-supervise (child): fatal: unable to exec run: Permission denied
by arnaud gaboury
I am following this wiki[0] to run R Studio on my box. Below are the
commands I run
----------------------
# podman run -d -p 8787:8787 -e PASSWORD=XXX --name rstudio rocker/tidyverse
..........
Storing signatures
a72fac512b891c21f0654334a2032b0d67b87720cb986a092237ab272d245f8d
-----------------------------------
At this point, I am supposed to access the R studio app via my Firefox
browser on port 8787 on localhost, which I can't.
Debuging:
--------------------------------------------
- Is the container running?
# podman ls
CONTAINER ID IMAGE COMMAND CREATED
STATUS PORTS NAMES
a72fac512b89 docker.io/rocker/tidyverse:latest /init 2 minutes ago Up
2 minutes ago 0.0.0.0:8787->8787/tcp rstudio
-Is the 8787 port open?
# podman port a72fac512b89
8787/tcp -> 0.0.0.0:8787
# lsof -i -P -n | grep LISTEN
8:cupsd 984 root 8u IPv6 35102 0t0 TCP [::1]:631 (LISTEN)
9:cupsd 984 root 9u IPv4 35103 0t0 TCP 127.0.0.1:631
(LISTEN)
67:conmon 12891 root 5u IPv4 453576 0t0 TCP *:8787 (LISTEN)
- Can I ping localhost, 0.0.0.0, 127.0.0.1, yogabx (hostname), 192.168.1.92
(returned by ip -a)
YES
- Do I have any firewall/iptable running?
# systemctl status firewalld.service
● firewalld.service
Loaded: masked (Reason: Unit firewalld.service is masked.)
Active: inactive (dead)
NO iptables
# curl localhost:8787
curl: (7) Failed to connect to localhost port 8787: Connection refused
# podman logs a72fac512b89
[fix-attrs.d] applying owners & permissions fixes...
[fix-attrs.d] 00-runscripts: applying...
[fix-attrs.d] 00-runscripts: exited 0.
[fix-attrs.d] done.
[cont-init.d] executing container initialization scripts...
[cont-init.d] add: executing...
Nothing additional to add
[cont-init.d] add: exited 0.
[cont-init.d] userconf: executing...
[cont-init.d] userconf: exited 0.
[cont-init.d] done.
[services.d] starting services
[services.d] done.
s6-supervise (child): fatal: unable to exec run: Permission denied
s6-supervise rstudio: warning: unable to spawn ./run - waiting 10 seconds
s6-supervise (child): fatal: unable to exec run: Permission denied
s6-supervise rstudio: warning: unable to spawn ./run - waiting 10 seconds
..... and so on
----------------------------
Googling this issue (s6-supervise (child): fatal: unable to exec run:
Permission denied), I found a few reported issues like this one[1],[2]
I don't understand what is behind, so can anyone help me to solve this
issue (if I can).
Thank you
[0]https://github.com/rocker-org/rocker/wiki/Using-the-RStudio-image
[1]https://github.com/linuxserver/docker-plex/issues/76
[2]https://github.com/linuxserver/docker-sonarr/issues/28
5 years, 2 months
Web Content
by Antonio M
What is this process that makes my computer crazy?? How can I avoid it?
Antonio Montagnani
Linux Fedora 29 Workstation
da/from Gmail
5 years, 2 months
multi-line URIs
by Jon LaBadie
When selection a multi-line URI in a terminal window
I've noticed two behaviors. Some will ?ignore? the
extra lines and only select to the end of the first
line. Others will select the entire URI, typically
to an ending ">". Obviously I would prefer the latter.
Is this behavior terminal specific, i.e. gnome-terminal
vs mate-terminal vs xterm. Or is it a configuration
parameter that I've not found?
Jon
--
Jon H. LaBadie jonfu(a)jgcomp.com
5 years, 2 months
Dell T7500 won’t boot starting at 4.19.13 for fedora 29
by Nate Pearlstein
Dell T7500 won’t boot on 4.19.13 or later from fedora updates for F29. 4.19.10 works. 4.19.11 and 4.19.12 from Koji boot as well. No output after Probing EDD on vga console starting with 4.19.13 through the latest today, 4.9.15.
5 years, 2 months
gnome-boxes no longer works with enforcing SELinux
by Dirk Gottschalk
Hello.
I'm encountering a strange issue with Gnome-Boxes and SELinux running
under F29.
If SELinux is in enforcing mode, the VM can not be started. I get only
a nonsense error message that tells me it is impossible to startup.
Then, after checking the file permissions, I set SELinux to permissive
mode with 'setenforce 0'. Then, the VMs start without any problem.
I also did relablel the entire filesystem without success.
Sidenote: I had to reinstall F29 after trying the mls policy, 'cause it
f*cked up my system.
As told, I relabeled the whole filesystem after this reinstallation
just to ensure a proper labeled home partition, which I did not erase.
Do I have to set a special label for some subdirectories which are not
set automatically?
Regards,
Dirk
--
Dirk Gottschalk
Paulusstrasse 6-8
52064 Aachen, Germany
GPG: DDCB AF8E 0132 AA54 20AB B864 4081 0B18 1ED8 E838
Keybase.io: https://keybase.io/dgottschalk
GitHub: https://github.com/Dirk1980ac
5 years, 2 months
F28 Java in firefox
by Robert Moskowitz
Gee, I Thought I had Java installed, but just got the message:
This product requires the Java language, which is either disabled or not
available on this browser.
To use this product you must either upgrade your browser to one that is
Java compliant, or enable the Java language on your current browser.
How do I check what is needed and how to get it working...
thanks
5 years, 2 months
dnf keeps reinstalling a package
by sean darcy
rpm -q gstreamer1-plugins-ugly
gstreamer1-plugins-ugly-1.14.4-2.fc29.x86_64
but:
sudo dnf upgrade
.......
Dependencies resolved.
Problem: package gstreamer1-plugins-ugly-1.14.4-2.fc29.x86_64 requires
libx264.so.155()(64bit), but none of the providers can be installed
I'm using a newer version of x264, and rebuilt plugins-ugly with it. Why
does dnf keep trying to install the repo version. What rule does dnf
follow that overrides the the package version name ? And can you
override the override ?
sean
5 years, 3 months