Where is wireshark-qt?
by John Harris
Anyone know what happened to wireshark-qt? I looked at the devel list and was
only able to find wireshark-gtk being dropped, with the possible renaming of
wireshark-qt.
--
John M. Harris, Jr. <johnmh(a)splentity.com>
Splentity
https://splentity.com/
5 years, 3 months
http & mod_authnz_pam
by lejeczek
hi everyone
I'd like to ask about mod_authnz_pam. I've trying to test a
very simple config, like here:
<Location /svnpam>
AuthType Basic
AuthName "pam"
AuthBasicProvider PAM
AuthPAMService dovecot
<RequireAny>
Require valid-user
</RequireAny>
</Location>
You can see I'm trying dovecot's pam.
But this fails:
...
check pass; user unknown
password check failed for user (me)
pam_unix(dovecot:auth): authentication failure; logname=
uid=48 euid=48 tty= ruser= rhost=10.3.1.21 user=me
...
This should be simple and should work, right?
many thanks, L.
5 years, 3 months
Pgadmin package broken?
by cen
F28 Pgadmin4 experience out of the box is not good for me
sudo dnf install pgadmin4
pgadmin4
"An error occurred initialising the application server: Failed to launch
the application server, server thread exiting."
I already had a similar problem with official rpm package in F25, this
looks exactly the same. Anyone else?
5 years, 3 months
SSH copy failure from Fedora server to any client
by 74cmonty
Hi,
I setup my first Fedora 29 server (for FreeIPA).
Now I need to copy a file to another client.
When I execute scp I get this in terminal (after entering password) and file is not transferred:
[admin@pc7-cubi3 ~]$ scp locadmin@ipa-master.biszumbitterenen.de:/tmp/client1.keytab krb5.keytab
The authenticity of host 'ipa-master.biszumbitterenen.de (192.168.100.252)' can't be established.
Password:
\033[0m\033[1;34m /:-------------:\ \033[0m\033[1;34m locadmin\033[0m\033[1m(a)\033[0m\033[0m\033[1;34mipa-master.biszumbitterenen.de\033[0m
I didn't experience any similar issue on other Linux distros (Arch, Debian, Suse).
Can you please advise what's causing this error?
THX
5 years, 3 months
Extremely slow Josm
by Robin Lee
Hi
I have a desktop and a laptop, both with fully updated Fedora 29. The
laptop is a fresh installation while the desktop has been upgraded from
previous versions of Fedora. And I have Josm installed on both.
Now the problem is that on the desktop Josm has become really slow. You
need some serious patience to use it. On the laptop it works fine as it
did on the desktop before. I've tried to reinstall Josm, but that
didn't help.
Josm is a Java application.
Any idea what could be wrong?
Cheers
Robin
5 years, 3 months
Breaking LVM (on purpose)
by Ian Malone
Does anyone have suggestions for easily simulating a missing volume in
LVM on bare metal? I'm trying to test behaviour like a network
attached physical volume going missing (actually, a network mounted
virtual disc image). The normal loopback approach to testing falls a
bit short, while overwriting the file can corrupt the PV, removing it
seems very hard, as even force removing the loop device seems to leave
it connected to the file handle, meaning a reboot is required to
really clear things, and so at the minute I can only test what happens
if a drive is missing after boot, rather than disappears during
operation. (A bit easier to do with discs on a VM, but doing testing
on a laptop.)
--
imalone
http://ibmalone.blogspot.co.uk
5 years, 3 months
Can't create a new VM with Virtual Machine Manager
by Patrick O'Callaghan
I currently run a couple of VMs (one Windows 10 and one Fedora Server)
under QEMU/KVM. I wanted to create a new one and got this:
Unable to complete install: 'internal error: process exited while connecting to monitor: 2018-12-31T14:23:14.816147Z qemu-system-x86_64: can't apply global IvyBridge-IBRS-x86_64-cpu.osxsave=on: Property '.osxsave' not found'
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/asyncjob.py", line 75, in cb_wrapper
callback(asyncjob, *args, **kwargs)
File "/usr/share/virt-manager/virtManager/create.py", line 2559, in _do_async_install
guest.start_install(meter=meter)
File "/usr/share/virt-manager/virtinst/guest.py", line 465, in start_install
doboot, transient)
File "/usr/share/virt-manager/virtinst/guest.py", line 401, in _create_guest
domain = self.conn.createXML(install_xml or final_xml, 0)
File "/usr/lib64/python3.7/site-packages/libvirt.py", line 3718, in createXML
if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self)
libvirt.libvirtError: internal error: process exited while connecting to monitor: 2018-12-31T14:23:14.816147Z qemu-system-x86_64: can't apply global IvyBridge-IBRS-x86_64-cpu.osxsave=on: Property '.osxsave' not found
The last line is the key. This is similar to a bug I had a while back and reported at the time:
https://bugzilla.redhat.com/show_bug.cgi?id=1644848
When it happened before I edited the XML file to remove the .osxsave
flag and that solved the problem. However now it's happening with a
fresh VM so there's no XML file to edit. Note that the new VM is a
small Windows test install with no special configuration, i.e.
everything just uses the default settings.
I've posted about this on the VFIO list but haven't received a solution
so far. See
https://www.redhat.com/archives/vfio-users/2018-December/msg00026.html
poc
5 years, 3 months
Strange DNF Behavior After Upgrade to F29
by Charlie McVeigh
I just upgraded to F29 from F28 yesterday.
The current kernel that I am running according to uname -r is:
4.19.12-301.fc29.x86_64
However when I run "dnf upgrade" today I get the following dependencies
to be installed:
Installing dependencies:
kernel-core x86_64 4.19.13-
300.fc29 updates 25 M
kernel-devel x86_64 4.19.13-
300.fc29 updates 13 M
kernel-modules x86_64 4.19.13-
300.fc29 updates 28 M
kernel-modules-extra x86_64 4.19.13-
300.fc29 updates 2.2 M
kernel 4.19.13-300.fc29 appears to be a downgrade from the kernel that
I am currently booting into. Is this right? And If not any
recommended solutions?
Thanks.
Charlie
5 years, 3 months
Cannot boot windows dual boot -- is this a grub issue?
by William Oliver
I just installed Fedora29 on my brand new HP laptop. The installation
went fine, and Fedora comes up fine. However, I was trying to install
it as a dual boot machine, and the Windows option does not come up
either with a "normal" grub bootup or when I choose boot options in
BIOS.
THe box has hybrid drive -- 256G SSD and 1 TB regular. I'm installing
everything on the SSD right now, and then will link out stuff or
repartition just a bit to move things to the 1 TB drive. But I thought
I'd just stick to the SSD for installation to minimize hassles.
I didn't delete or overwrite the EFI partition, and /boot/efi has what
appears to be old HP, Microsoft, and Boot directories in addition to
the new fedora directory.
The only thing that was unusual in this installation was that I got the
warning that because I was using GPT, I had to create a 1 MB
bootsomethingsomething partition -- which I did.
So, now my drive looks like:
partition name fs mount sz flags
/dev/nvme0n1p1 EFI fat32 /boot/efi 260 MB boot,esp
/dev/nvme0n1p2 MS reserved unknown 16 MB msftres
/dev/nvme0n1p3 basic data ntfs 60 GB msftdata
/dev/nvme0n1p5 grub2.core.img 2 MB bios_grub
/dev/nvme0n1p6 lvm2 pv fedora 55.89 GB lvm
/dev/nvme0n1p4 basic data ntfs 980 MB hidden,diag
There's about 121 unallocated GB on the SSD, and the 1 TB drive isn't
mounted.
Eventually, this will be a triple boot system, with the other OS being
qubesOS. However, I need a vanilla Fedora boot option because qubesOS
won't support some graphics I need for some apps. But, I usually
install the Qubes stuff last, since it's such a joy.
So, I have two questions:
1) WHat is this 1 M bootsomethingsomething I had to make? It looks
like it turned into something called bios_grub. I've never had to do
this before.
2) Can someone point me to resources to learn how to troubleshoot
making grub see my Windows stuff? Or give me any ideas?
Thanks!
billo
5 years, 3 months
Problem installing Fedora 29
by William Oliver
I just bought a brand new little HP laptop and decided to try to
install Fedora 29. I created the bootable flash drive in Windows using
Rufus. When I try to boot from the flash drive, I get the following
error:
[ 8.520307] dracut: FATAL: Failed to mount block device of live image:
Missing NTFS support
[ 8.530427] dracut: Reufusing to continue
[ 9.112611] reboot: System halted
Any help would be appreciated!
Thanks,
billo
5 years, 3 months
