November 2019 - users - Fedora mailing-lists

[FC8] ssh and CAC card???
by Todd Denniston 17 Sep '24

17 Sep '24

From what I understood, the change to openssh listed in: rpm -q --changelog openssh |less as: "* Wed Jun 20 2007 Tomas Mraz <tmraz(a)redhat.com> - 4.5p1-7 - experimental NSS keys support - correctly setup context when empty level requested (#234951) " was supposed to allow the Common Access Card (CAC) to work with the shipped Fedora 8 ssh. As per NSS usual, everything is undocumented, i.e., `ssh-add --help` does not help at all, and `man ssh-add` points to `ssh-add -s reader` # ssh-add -s 0 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 0 # ssh-add -s 1 Enter passphrase for smartcard: SSH_AGENT_FAILURE Could not add card: 1 So does anyone know how to use the possible functionality, or are we reduced to reading the source? -- Todd Denniston Crane Division, Naval Surface Warfare Center (NSWC Crane) Harnessing the Power of Technology for the Warfighter

4 8

This list's search engine not working?
by HaJo Schatz 22 May '24

22 May '24

Ever since I stumbled across this list, I seem to have major difficulties searching the archives. Say I want to see my posts to the list (they all have the same footer as below), I believe I could go to http://www.redhat.com/archives/fedora-list/ and enter "HaJo" as a search string. Searching in all sections, I get 0 results. Does the search engine ignore me by some reason? BTW -- I've been posting since about June, and when showing the archives sorted by author, I do find my posts. OK, not the most helpful to search for my own posts, but I do have the same issue when searching for given topics. Any other search engine out there indexing this list reliably? Google shows 0 hits on a "site:www.redhat.com/archives/fedora-list/" search... -- HaJo Schatz <hajo(a)hajo.net> http://www.HaJo.Net PGP-Key: http://www.hajo.net/hajonet/keys/pgpkey_hajo.txt

4 5

Re: Tomcat
by Rahul Sadotra 21 May '24

21 May '24

Hi Michael, --- Michael Folin <michael.folin(a)donator.se> wrote: > how do I install Tomcat i fedora? > can't find it during the installation > If you mean during the installation of Fedora Core itself, then I don't think Tomcat is provided with Fedora Core (please feel free to correct me if I'm wrong). This means you will probably need to download Apache Jakarta Tomcat (either binaries, or the source which you'll need to build) and install it. Hope this helps. All the best, Rahul ___________________________________________________________ALL-NEW Yahoo! Messenger - all new features - even more fun! http://uk.messenger.yahoo.com

2 1

SATA optical drives
by David Fletcher 22 Jun '23

22 Jun '23

I'm currently running FC5, will probably upgrade to F7 in a couple of months. Unfortunately my CD/DVD rewriter appears to have died, before it's even seen a dual layer disk :'( SATA hard drives run without problems for me, but now that SATA optical drives are starting to appear in the shops, would it be OK to buy one of these and get rid of another wide ribbon cable? Is anybody already running them with Fedora? Thanks for any advice/experiences. Dave F

5 4

Apache and umask for document root
by Alex 03 Aug '22

03 Aug '22

Hi, I've set up a virtual host for a joomla website and having some permissions problems. I've seen numerous configurations online about how to set umask for the apache user, but none have worked, including creating a systemd file (/etc/systemd/system/multi-user.target.wants/httpd.service) with the following: [Unit] Description=The Apache HTTP Server After=network.target remote-fs.target nss-lookup.target [Service] Type=notify Environment=LANG=C Umask=0006 ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND ExecReload=/usr/sbin/httpd $OPTIONS -k graceful # Send SIGWINCH for graceful stop KillSignal=SIGWINCH KillMode=mixed PrivateTmp=true [Install] WantedBy=multi-user.target The problem is that the files are owned by the joomla user, but also need to have access (both read and write) to be able to modify some files within the document root. Does anyone have any suggestions on how to set umask for the apache user? I'm also interested in recommended permissions settings for the joomla document root. Thanks, Alex

9 35

Changing date with procmail
by Michael A. Peters 08 Jun '22

08 Jun '22

Anyone know of a procmail recipe to change the date on incoming messages? If the date is in the future by more than 24 hours - I'd like to just change it to the current date. If the date is in the past by more than two weeks - I'd like to just change it to the current date. I'd like to do it in procmail - if someone knows how. I've done some searching, still have some to do. Found some stuff on extracting the date, but not on modifying it if necessary.

5 5

Improper shutdown, now Kernel panic.
by murph nj 23 Jan '22

23 Jan '22

Hi all: I've got an odd problem that I was hoping for some help on. The laptop was previously working fine, I am running F30, updated regularly. I've got an Acer laptop that has been shutting down suddenly. (I suspect a bad battery, working on that.) After a sudden shutdown last night, I now get a kernel panic on boot right after "Starting Switch Root..." I was able to boot from a USB stick, and was able to read the journal, but I didn't see anything obvious to help. I was able to get all of my data off of the (encrypted) disks, so that's not a problem, but I don't want to just give up, and wash and reload too quickly. Any suggestions? Thanks, --murph

6 19

Anyone running F11 on a Dell mini ? (Or another mini ?)
by linux guy 17 Jan '22

17 Jan '22

How is it working for you ? Thanks

10 21

Re: Backing up system
by gmspro 02 Feb '21

02 Feb '21

Hi, http://www.sysresccd.org/Download With the SystemRescueCd I backed up the /dev/sda6 partition in /mnt/backup/ naming "diskimage" After backing up operation the file has the automatic extension like "diskimage.000". Is this file ok to restore? If I name it "diskimage.gz" then it is automatically renamed with this extension "diskimage.gz.000" But here below http://www.sysresccd.org/Screenshots the file is name like this: "diskimage.pimg" Do I have to name with the .pimg extension during backup to restore correctly? And how can I restore it?

7 7

Missing MiscFixed 16 font in Fedora 31
by Ranjan Maitra 31 Jan '21

31 Jan '21

Hi, I upgraded to F31 late last week and I am missing the MiscFixed 16 font that I prefer using. Where would I find it? Many thanks, Ranjan -- Important Notice: This mailbox is ignored: e-mails are set to be deleted on receipt. Please respond to the mailing list if appropriate. For those needing to send personal or professional e-mail, please use appropriate addresses.

3 14

how to install zoom client.
by home user 04 Nov '20

04 Nov '20

Good morning, (f-29) (background) Last week, I was to participate in a "Zoom" meeting for a charity that I'm involved in. I have the needed software on my rarely-used windows-7 box. But I could not complete the windows-7 login (some problem with a windows-7 service). I've since found there is a "Zoom" client for Fedora. "dnfdragora" does not find anything for it. But I found a web page that I hope has what I need. I've downloaded the package ("zoom_x86_64.rpm"), and I've downloaded a "Public Key" ("package-signing-key.pub"). The web site from which I've downloaded these also has a line: Key fingerprint: [some 40 hex digit number] (4 questions) 1. Do the 2 files need to be in a specific place to do the install? If yes, where? 2. Do I need to be "root" to do the install? 3. What do I do with the "Key fingerprint"? 4. How do I do the install (preferably using "dnf")? thanks, Bill.

7 12

What do you open .mobi files with??
by Beartooth 31 Mar '20

31 Mar '20

Something on sourceforge has been recommended to me, but I try to stick to things that dnf can install. Surely there must be some Fedora- native ebook reader! -- Beartooth Staffwright, Not Quite Clueless Power User Remember I know little (precious little!) of where up is.

6 10

F30 Lenovo x140e - no wifi
by Robert Moskowitz 17 Jan '20

17 Jan '20

I have been using ethernet up to now. I went to enable the wifi, to see no wifi listed. It has been too long since I have had to do this troubleshooting. Can some point me to what I need to look at to find what the Fedora thinks is the wifi? thanks

3 4

Fc30 -> FC31 : Can't rename interfaces. FC30 worked.
by Sean Darcy 26 Dec '19

26 Dec '19

Just upgraded to FC31. It's a multihomed machine used as a router. One interface "external" goes to the cable modem. The other interface "internal" goes to a switch. cat /etc/sysconfig/network-scripts/ifcfg-external | grep -v \# TYPE=Ethernet BOOTPROTO=dhcp DEVICE=external ONBOOT=yes DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=no USERCTL=no HWADDR=50:7B:9D:0B:8A:AB NAME=external UUID=02b123a7-baea-20e2-051e-8a9ec27cc44a cat /etc/sysconfig/network-scripts/ifcfg-internal | grep -v \# DEVICE=internal TYPE=Ethernet BOOTPROTO=none ONBOOT=yes IPADDR=10.10.11.251 PREFIX=24 DEFROUTE=no IPV4_FAILURE_FATAL=no IPV6INIT=no PEERDNS=no USERCTL=no UUID=ef5b0746-2604-b21f-c03e-00556aef68fc HWADDR=00:0e:c6:dc:01:aa But neither interface is found on boot: enp0s20u3: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 00:0e:c6:dc:01:aa txqueuelen 1000 (Ethernet) RX packets 2573 bytes 172174 (168.1 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 enp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 ether 50:7b:9d:0b:8a:ab txqueuelen 1000 (Ethernet) RX packets 2581 bytes 180221 (175.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 765 bytes 81440 (79.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 765 bytes 81440 (79.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 even though the MAC adresses match. As do the UUID's: nmcli connection show | grep ernal external 02b123a7-baea-20e2-051e-8a9ec27cc44a ethernet -- System internal ef5b0746-2604-b21f-c03e-00556aef68fc ethernet -- enp0s20u3 is a USB interface that should be internal. If I unplug and replug, naming works. On boot: kernel: asix 2-3:1.0 eth0: register 'asix' at usb-0000:00:14.0-3, ASIX AX88772 USB 2.0 Ethernet, 00:0e:c6:dc:01:aa kernel: usbcore: registered new interface driver asix kernel: asix 2-3:1.0 enp0s20u3: renamed from eth0 then I unplug and plug: kernel: asix 2-3:1.0 internal: renamed from enp0s20u3 kernel: asix 2-3:1.0 internal: link up, 100Mbps, full-duplex, lpa 0x45E1 That does not happen if I plug and unplug external, an ethernet cable. BUT, what's really odd. I'm booting the Fc31 kernel: kernel-5.3.11-300.fc31.x86_64 if I boot the same kernel, but FC30: kernel-5.3.11-200.fc30.x86_64 IT WORKS !! Any help appreciated. sean

6 9

Updated info about disabling tracker related processes?
by Gianluca Cecchi 22 Dec '19

22 Dec '19

Hello, I have recently begun to use again gnome session and I have reinstalled nautilus. I see that nautilus depends on tracker and so the reinstall put in tracker and its things And this morning in my F28 system with SSD disk (I don't imagine on a normal sata based environment) I had to kill tracker-extract and tacker-miner processes because they hogged my cpu for several minutes.. Searching with google I found different info about disabling (or at least calm down) tracker, but they all seem not updated, in the sense that several commands/services are not present in my f28 environment. Any pointer about configuring and/or disabling it? Thanks in advance, Gianluca

6 12

Anyone using Anydesk or could test it ?
by sixpack13 13 Dec '19

13 Dec '19

Hallo is anyone using Anydesk or could test it ? https://anydesk.com/en/downloads/linux since the F31-updates during the last week I'm unable to work with anydesk anymore. I'm using Xorg not wayland. Problem: During the start of an connection a completely blank dialog box pops up. Usually it's an dialog to allow the connection attempt on the remote box. Connection between F31 => Windows works. Connection between F31 <= Windows does not ! Connections between F31 <=> F31 do not ! It is sufficing to try a F31 connection to the *same* machine to see to empty dialog box. Does anyone know to debug this ? Against which component should I fill a bug report ? P.S. This comment may appear twice in this list, so please ignore. The first one somehow seems to be got lost ?! it was created and send from thunderbird to users(a)lists.fedoraproject.org

3 5

gnome frozen when ssfhs stall
by Patrick Dupre 08 Dec '19

08 Dec '19

Hello, I already complained about the following issue, and I submitted the bug to bugzilla without feedback. If I have an open gnome session which turns to sleep because of a lack of activity. Then, if a sshfs connection stalls, there is no way to relogin through the gnome-session. The only option that I have is to kill -9 -1 through a terminal tty the gnome session, but I lost all the session. Other options? =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

4 13

Fedora 31: Chromium does not support h264 even after installing a lot of different packages
by Farhad Mohammadi Majd 02 Dec '19

02 Dec '19

Hello. Fedora 31 (AMD64) and Chromium 78, I have installed following packages on the system, but still MP4-H264 is not supported by Chromium: VLC + MPV + GNOME-MPV (celluloid) and their dependencies. gstreamer1-plugin-openh264, gstreamer1-libav, gstreamer1-plugins-ugly I have seen < https://docs.fedoraproject.org/en-US/quick-docs/installing-chromium-or-goog… > but widevine plugin is not easy accessibale, I just want a routine MP4 playback. * chromium-libs-media-freeworld * is one version behind latest version (77) and requies downgrading to Chromium 77! while 78 is latest version. There was no clear and straightforward instruction on the web.

4 5

FC31 : soft lockup on boot
by Sean Darcy 29 Nov '19

29 Nov '19

Just updated FC30->FC31. Now I'm in a soft lockup boot loop. Since I can't boot, no logs. Just before the lockup: random: crng init done random: 7 urandom warning(s) missed due to ratelimiting then watchdog: BUG: soft lockup - CPU#0 stuck for 23s! It sits for a while, then reboots. Rinse and repeat. I've tried nomodeset as a kernel parameter. No joy. Any suggestions appreciated. sean

3 2

Re: (fedora) Re: sshd on F31 : strange problem with login with keys's
by Jouk Jansen 29 Nov '19

29 Nov '19

Jakub Jelen wrote on 27-NOV-2019 13:20:25.09 >On Tue, 2019-11-26 at 13:27 +0100, Jouk Jansen wrote: [snip] >> Question : why does is work with just running "/usr/sbin/sshd" but >> not with >> "systemctl start sshd" ? >This sounds like an issue with selinux permissions on the authorizied >keys file or path to it. Configure sshd to run in debug mode by setting >LogLevel DEBUG3 in sshd_config, restart the service and retry. The logs >will show up in journal and in /var/log/secure pointing the reason why >your key was rejected. You are right. I switched selinux off (setenforce 0) and the problem is gone. I could not find an entry in the journalctl -e output (but maybe I overlooked (too many records)). Perhaps I should look in the selinux logs, but where do I find them? Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

4 5

Re: FC31 : soft lockup on boot
by Samuel Sieb 29 Nov '19

29 Nov '19

(Adding the users list back in.) On 11/29/19 1:08 PM, sean darcy wrote: > On 11/29/19 3:14 PM, Samuel Sieb wrote: >> On 11/29/19 9:58 AM, Sean Darcy wrote: >>> Just updated FC30->FC31. Now I'm in a soft lockup boot loop. >>> >>> Since I can't boot, no logs. >>> >>> watchdog: BUG: soft lockup - CPU#0 stuck for 23s! >>> >>> It sits for a while, then reboots. Rinse and repeat. >> >> Interesting that it eventually reboots itself. >> >>> I've tried nomodeset as a kernel parameter. No joy. >>> >>> Any suggestions appreciated. >> >> Have you tried removing the "rhgb quiet" from the end to get more >> kernel output? >> Have you tried booting one of the F30 kernels instead? >> > Taken rhgb quiet out, and tried the fc30 kernel. No joy. > > It reboots itself after about 2 or 3 minutes. Continuously. That makes it sound more like a hardware problem. There were no other messages? You tried the oldest kernel in the grub list? My only other suggestion would be to try a F30 live boot image.

1 0

Switching to a new root disk
by Patrick O'Callaghan 29 Nov '19

29 Nov '19

I have a new 2TB SSD I want to configure as root+home, with an extra partition for a Windows VM. My current setup is: /dev/sda (an older 120GB SSD) which currently has /boot and / via LVM: /dev/sda1 2048 1230847 1228800 600M EFI System /dev/sda2 1230848 3327999 2097152 1G Linux filesystem /dev/sda3 3328000 234440703 231112704 110.2G Linux LVM $ df -h Filesystem Size Used Avail Use% Mounted on devtmpfs 7.7G 0 7.7G 0% /dev tmpfs 7.7G 214M 7.5G 3% /dev/shm tmpfs 7.7G 1.7M 7.7G 1% /run /dev/mapper/fedora_localhost--live-root 68G 27G 38G 41% / tmpfs 7.7G 87M 7.7G 2% /tmp /dev/sda2 976M 233M 677M 26% /boot /dev/sda1 599M 20M 580M 4% /boot/efi /dev/sdb1 1.9T 1.5T 372G 81% /home tmpfs 1.6G 96K 1.6G 1% /run/user/1000 /dev/sdb is an ext4 HDD with /home /dev/sdc is a Windows HDD I mostly use under QEMU/KVM though can also boot directly. This disk will be replaced by the new and larger SSD. My first thought was to use dd to clone the 3 partitions of the old SSD onto 3 identically-sized partitions on the new one, then add extra partitions for /home (which will shrink in size after splitting off a bunch of media files) and the Windows installation. The new SSD will then replace the old one, which will be retired. Will this work without adjusting the EFI setup or grub2? If not, what other steps are required? Clearly /etc/fstab would also need some editing but I'm comfortable with that. EFI is the kicker as I've only just started to use it and really don't know what I'm doing. poc

2 5

gnome3: external monitor, builtin still primary after lid-close
by Gabriel L. Somlo 29 Nov '19

29 Nov '19

I test-drove a vanilla install of F30 Workstation, and observed the following (correct) behavior: - without an external display, the laptop goes to sleep when the lid is closed - with the external display connected, the built-in screen becomes unavailable when the lid is closed, and the external screen becomes primary (the toolbar at the top moves there, and so do all the windows from the primary screen I then did a custom kickstart install, with a bunchof stuff *including* @gnome-desktop, which works fine overall, except: - when the lid is closed while an external display is connected, the built-in screen *remains* active (and primary, unless I explicitly make the external one primary). Since it's still marked as active/available, sometimes applications (e.g. firefox) end up sending popup boxes there, where I can't see them (since it's closed). I could not find which setting or package causes the difference in behavior between correct and incorrect, but I'd like to keep my custom kickstart installation if at all possible. Any idea how I could explicitly configure my gnome desktop environment to behave correctly w.r.t. extrenal monitor and lid-close effect on the built-in screen? Thanks much, --Gabriel

1 0

Fedora 32 Firefox and DNS over HTTPS
by Robert Moskowitz 29 Nov '19

29 Nov '19

In the upcoming Fedora 32, is Firefox defaulting to DNS over HTTPS (RFC 8484)? BTW, I am currently on F30 and will skip to F32 when it ships. If you want a high-level discuss on DNS over TLS or over HTTPS see: https://spectrum.ieee.org/tech-talk/telecom/security/the-fight-over-encrypt… One thing this article misses is if your company DNS server has an internal view for internal resources, defaulting to some outside DNS server breaks this. Or at least makes directing things the right way is hard. So what is happening with Firefox in F32? Thanks

6 6

sshd on F31 : strange problem with login with keys's
by Jouk Jansen 29 Nov '19

29 Nov '19

Hi All, I'm trying to setup an ssh-server on F31 which logs a user in without a password, but with a key-exchange. I generated all the keys and placed them in the right locations. It still asks for the password. Than comes the strange : I stoped the service by "systemctl stop sshd" and did run "as root" /usr/sbin/sshd. And than it just worked. (tried to stop and start with systemctl again made the passwordless login fail again) Question : why does is work with just running "/usr/sbin/sshd" but not with "systemctl start sshd" ? regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

6 6

Speaking of efi boot...
by Tom Horsley 28 Nov '19

28 Nov '19

I have developed a procedure for installing a new fedora that insures anaconda cannot possibly screw up my disks: I install in a virtual machine, guestmount the virtual image then rsync the new fedora to the real partition and edit grub and fstab parameters. I don't yet know if the new computer I'm building supports old fashioned MSDOS booting, or if I'll finally be forced to go with EFI. I'm wondering if it is remotely possible to do the same sort of install with EFI booting. I assume I'd need the qemu EFI bios so the virtual machine is set up for EFI booting. Would efibootmgr be able to fix things after the copy? Anyone ever done this?

2 1

Re: (fedora) Re: sshd on F31 : strange problem with login with keys's
by Jouk Jansen 28 Nov '19

28 Nov '19

Ed Greshko wrote on 28-NOV-2019 13:46:10.58 >On 2019-11-28 20:28, Ed Greshko wrote: >> If you're suggesting this to be a permission issue on authorized_keys wouldn't it be a good >> idea to request the output of "ls -Z ~/.ssh"? >Oh, as well as "ls -Zd ~/.ssh"? vleegert-jj ) ls -Z .ssh system_u:object_r:default_t:s0 authorized_keys system_u:object_r:default_t:s0 config system_u:object_r:default_t:s0 id_rsa.jacobjansen system_u:object_r:default_t:s0 id_rsa.jacobjansen.pub system_u:object_r:default_t:s0 known_hosts system_u:object_r:default_t:s0 known_hosts~ system_u:object_r:default_t:s0 result.pub vleegert-jj ) ls -Zd .ssh system_u:object_r:default_t:s0 .ssh vleegert-jj ) Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

Calendar display -
by Bob Goodwin 27 Nov '19

27 Nov '19

. I need some help with the tkremind calendar display in Fedora-31. Perhaps someone else is familiar with it and can offer a solution or an alternative to tkremind. All I need is a calendar format similar to a monthly paper calendar that I can list appointments on some days, Sometimes a medical appointment might be a year in the future. I don't want pop up displays for those days, just something that looks like an old paper calendar that might have hung on the wall. I sent the following request to the "remind" mail list and got no response so now here. I've been using this with Fedora over a number of releases and it has always worked through Fedora-29, on several different computers. Presently I an seeing this problem on two Fedora-31 xfce workstations. It displays as I want it for a fraction of a second and then reverts to black on white which does not work for me. I need to change the color of the month calendar display to present a white foreground on a black background to accommodate my vision problems. I have done this for some time with the following /home/bobg/.xresources: ! Reloads .Xresources file ! $ xrdb ~/.Xresources ! ! Shows contents of all properties ! $ xrdb -query ! ! Font settings extras Xft.dpi: 120 Xft.antialias: true Xft.hinting: true Xft.rgba: rgb Xft.autohint: false Xft.hintstyle: hintfull Xft.lcdfilter: lcdfilter ! ! /usr/local/bin/tkremind cooperation tkremind*Background: #000000 tkremind*Foreground: #ffffff tkremind*activeBackground: #000000 tkremind*activeForeground: #ffffff tkremind*highlightBackground: #00ff00 tkremind*selectBackground: #000000 tkremind*selectForeground: #ffffff ! Note: I did not create this it was suggested to me by Poma, <pomidorabelisima(a)gmail.com> in response to a request for help on the Fedora list. This has done what I need until Fedora-31, now the white text on a black background calendar comes on for a few milliseconds and reverts to black text on a white background. Can this be fixed or perhaps there is a better method for doing it? Any help in this will be appreciated, Bob -- Bob Goodwin - Zuni, Virginia, Fedora Linux-31 XFCE

2 5

openssl : 1.0.2k-fips vs. 1.1.1d
by Adrian Sevcenco 27 Nov '19

27 Nov '19

Does anyone have a pointer or idea what changed in terms of ciphers or algos or curves between the two versions? i have 2 pierces of software : the server which is java based and the client (python based, websockets) on centos7 1.0.2.k-fips i can connect to the localhost but in fedora{30,31} i have an SSLV3_ALERT_CERTIFICATE_UNKNOWN error Any idea whats is going on? Thanks a lot! Adrian

2 2

Re: (fedora) Re: sshd on F31 : strange problem with login with keys's
by Jouk Jansen 27 Nov '19

27 Nov '19

Tom Horsley wrote on 26-NOV-2019 19:05:50.24 >Try running the ssh command which is attempting to >login with the -v -v -v options, then you can see what it Does not learn me much (I added the log below). They are different from line 99 when a 1 or 0 is returned which enables/disables the key-login apparently. >is trying and what didn't work. >If it is an old enough system it may not share any >ciphers with the new f31 system as they have disabled >a lot of old ciphers by default. This would be strange since I put all the needed cyphers in /etc/ssh/sshd_config. And why would it work for running the command manually and not for the one started with systemctl? Regards Jouk ========= log with starting manually (connects OK ) tango-jj) ssh -v -v -v vleegert debug(27-NOV-2019 08:11:00.58): Ssh2/SSH2.C:1896: CRTL version (SYS$SHARE:DECC$S HR.EXE ident) is ELF debug(27-NOV-2019 08:11:00.60): SshAppCommon/SSHAPPCOMMON.C:313: Allocating glob al SshRegex context. debug(27-NOV-2019 08:11:00.61): SshConfig/SSHCONFIG.C:3482: Metaconfig parsing s topped at line 4. debug(27-NOV-2019 08:11:00.61): SshConfig/SSHCONFIG.C:890: Setting variable 'Ver boseMode' to 'FALSE'. debug(27-NOV-2019 08:11:00.61): SshConfig/SSHCONFIG.C:3390: Unable to open ssh2/ ssh2_config debug(27-NOV-2019 08:11:00.62): Connecting to vleegert, port 22... (SOCKS not us ed) debug(27-NOV-2019 08:11:00.62): Ssh2/SSH2.C:2881: Entering event loop. debug(27-NOV-2019 08:11:00.64): Ssh2Client/SSHCLIENT.C:1655: Creating transport protocol. debug(27-NOV-2019 08:11:00.64): SshAuthMethodClient/SSHAUTHMETHODC.C:104: Added "publickey" to usable methods. debug(27-NOV-2019 08:11:00.64): SshAuthMethodClient/SSHAUTHMETHODC.C:104: Added "password" to usable methods. debug(27-NOV-2019 08:11:00.64): Ssh2Client/SSHCLIENT.C:1696: Creating userauth p rotocol. debug(27-NOV-2019 08:11:00.64): client supports 2 auth methods: 'publickey,passw ord' debug(27-NOV-2019 08:11:00.64): SshUnixTcp/SSHUNIXTCP.C:1758: using local hostna me tango.nano.tudelft.nl debug(27-NOV-2019 08:11:00.64): Ssh2Common/SSHCOMMON.C:541: local ip = 131.180.1 21.84, local port = 57056 debug(27-NOV-2019 08:11:00.64): Ssh2Common/SSHCOMMON.C:543: remote ip = 131.180. 116.49, remote port = 22 debug(27-NOV-2019 08:11:00.64): SshConnection/SSHCONN.C:2584: Wrapping... debug(27-NOV-2019 08:11:00.64): SshReadLine/SSHREADLINE.C:3662: Initializing Rea dLine... debug(27-NOV-2019 08:11:00.66): Remote version: SSH-2.0-OpenSSH_8.1 debug(27-NOV-2019 08:11:00.66): OpenSSH: Major: 8 Minor: 1 Revision: 0 debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:1857: All versions of O penSSH handle kex guesses incorrectly. debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:1935: Using Client orde r for common key exchange algorithms. debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 20 to connection debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=2 0 debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:2394: lang s to c: `', lang c to s: `' debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:2459: c_to_s: cipher ae s128-cbc, mac hmac-sha1, compression none debug(27-NOV-2019 08:11:00.66): Ssh2Transport/TRCOMMON.C:2462: s_to_c: cipher ae s128-cbc, mac hmac-sha1, compression none debug(27-NOV-2019 08:11:00.67): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.67): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 30 to connection debug(27-NOV-2019 08:11:00.68): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=3 1 debug(27-NOV-2019 08:11:00.69): Remote host key found from database. debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 21 to connection debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 5 to connection debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=2 1 debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=6 debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.70): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:11:00.71): Ssh2Common/SSHCOMMON.C:342: Received SSH_CROSS_S TARTUP packet from connection protocol. debug(27-NOV-2019 08:11:00.71): Ssh2Common/SSHCOMMON.C:392: Received SSH_CROSS_A LGORITHMS packet from connection protocol. debug(27-NOV-2019 08:11:00.71): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:11:00.71): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:11:00.72): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:1677: adding keyfile "/SYS$SYSDEVICE/JOUKJ/COM/ssh2/ID_DSA_2048_A" to candidates debug(27-NOV-2019 08:11:00.72): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:1677: adding keyfile "/SYS$SYSDEVICE/JOUKJ/COM/ssh2/ID_RSA_2048_A" to candidates debug(27-NOV-2019 08:11:00.72): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.72): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:11:00.73): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:11:00.73): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:11:00.73): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.73): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:11:00.74): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=6 0 debug(27-NOV-2019 08:11:00.74): Constructing and sending signature in publickey authentication. debug(27-NOV-2019 08:11:00.74): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:869: ssh_cli ent_auth_pubkey_send_signature: reading /SYS$SYSDEVICE/JOUKJ/COM/ssh2/ID_RSA_204 8_A debug(27-NOV-2019 08:11:00.81): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:11:00.81): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:11:00.85): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 2 debug(27-NOV-2019 08:11:00.86): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:1915: Public key authentication was successful. ======================== ========= log with starting with systemctl (connects not without password ) tango-jj) ssh -v -v -v vleegert debug(27-NOV-2019 08:10:22.77): Ssh2/SSH2.C:1896: CRTL version (SYS$SHARE:DECC$S HR.EXE ident) is ELF debug(27-NOV-2019 08:10:22.79): SshAppCommon/SSHAPPCOMMON.C:313: Allocating glob al SshRegex context. debug(27-NOV-2019 08:10:22.80): SshConfig/SSHCONFIG.C:3482: Metaconfig parsing s topped at line 4. debug(27-NOV-2019 08:10:22.80): SshConfig/SSHCONFIG.C:890: Setting variable 'Ver boseMode' to 'FALSE'. debug(27-NOV-2019 08:10:22.80): SshConfig/SSHCONFIG.C:3390: Unable to open ssh2/ ssh2_config debug(27-NOV-2019 08:10:22.81): Connecting to vleegert, port 22... (SOCKS not us ed) debug(27-NOV-2019 08:10:22.81): Ssh2/SSH2.C:2881: Entering event loop. debug(27-NOV-2019 08:10:22.83): Ssh2Client/SSHCLIENT.C:1655: Creating transport protocol. debug(27-NOV-2019 08:10:22.83): SshAuthMethodClient/SSHAUTHMETHODC.C:104: Added "publickey" to usable methods. debug(27-NOV-2019 08:10:22.83): SshAuthMethodClient/SSHAUTHMETHODC.C:104: Added "password" to usable methods. debug(27-NOV-2019 08:10:22.83): Ssh2Client/SSHCLIENT.C:1696: Creating userauth p rotocol. debug(27-NOV-2019 08:10:22.83): client supports 2 auth methods: 'publickey,passw ord' debug(27-NOV-2019 08:10:22.83): SshUnixTcp/SSHUNIXTCP.C:1758: using local hostna me tango.nano.tudelft.nl debug(27-NOV-2019 08:10:22.83): Ssh2Common/SSHCOMMON.C:541: local ip = 131.180.1 21.84, local port = 57055 debug(27-NOV-2019 08:10:22.83): Ssh2Common/SSHCOMMON.C:543: remote ip = 131.180. 116.49, remote port = 22 debug(27-NOV-2019 08:10:22.83): SshConnection/SSHCONN.C:2584: Wrapping... debug(27-NOV-2019 08:10:22.83): SshReadLine/SSHREADLINE.C:3662: Initializing Rea dLine... debug(27-NOV-2019 08:10:22.85): Remote version: SSH-2.0-OpenSSH_8.1 debug(27-NOV-2019 08:10:22.85): OpenSSH: Major: 8 Minor: 1 Revision: 0 debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:1857: All versions of O penSSH handle kex guesses incorrectly. debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:1935: Using Client orde r for common key exchange algorithms. debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 20 to connection debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=2 0 debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:2394: lang s to c: `', lang c to s: `' debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:2459: c_to_s: cipher ae s128-cbc, mac hmac-sha1, compression none debug(27-NOV-2019 08:10:22.85): Ssh2Transport/TRCOMMON.C:2462: s_to_c: cipher ae s128-cbc, mac hmac-sha1, compression none debug(27-NOV-2019 08:10:22.86): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.86): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 30 to connection debug(27-NOV-2019 08:10:22.87): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=3 1 debug(27-NOV-2019 08:10:22.88): Remote host key found from database. debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 21 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 5 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=2 1 debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=6 debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:10:22.89): Ssh2Common/SSHCOMMON.C:342: Received SSH_CROSS_S TARTUP packet from connection protocol. debug(27-NOV-2019 08:10:22.89): Ssh2Common/SSHCOMMON.C:392: Received SSH_CROSS_A LGORITHMS packet from connection protocol. debug(27-NOV-2019 08:10:22.90): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:10:22.90): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:10:22.90): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:1677: adding keyfile "/SYS$SYSDEVICE/JOUKJ/COM/ssh2/ID_DSA_2048_A" to candidates debug(27-NOV-2019 08:10:22.91): Ssh2AuthPubKeyClient/AUTHC-PUBKEY.C:1677: adding keyfile "/SYS$SYSDEVICE/JOUKJ/COM/ssh2/ID_RSA_2048_A" to candidates debug(27-NOV-2019 08:10:22.91): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.91): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:10:22.92): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:10:22.92): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:10:22.92): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.92): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:10:22.93): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:10:22.93): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:10:22.93): Ssh2AuthClient/SSHAUTHC.C:378: Method 'publickey ' disabled. debug(27-NOV-2019 08:10:22.93): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 2 to connection debug(27-NOV-2019 08:10:22.93): Ssh2Transport/TRCOMMON.C:1139: Sending packet wi th type 50 to connection debug(27-NOV-2019 08:10:22.94): Ssh2Transport/TRCOMMON.C:2832: >TR packet_type=5 1 debug(27-NOV-2019 08:10:22.94): server offers auth methods 'publickey,gssapi-key ex,gssapi-with-mic,password'. debug(27-NOV-2019 08:10:22.94): Ssh2AuthPasswdClient/AUTHC-PASSWD.C:280: Startin joukj's password: . Cancel ========== Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

f31 : pkgconfig.exists( 'uuid-dev' ) false but installed
by Adrian Sevcenco 27 Nov '19

27 Nov '19

Hi! I have a strange problem in fedora 31 with the fact that even if libuuid is installed : [xrootdtest@c340sev xrootd]$ rpm -qa | grep uuid uuid-devel-1.6.2-45.fc31.x86_64 uuid-c++-1.6.2-45.fc31.x86_64 libuuid-2.34-3.fc31.x86_64 uuid-c++-devel-1.6.2-45.fc31.x86_64 uuid-1.6.2-45.fc31.x86_64 in python3 i have this : [xrootdtest@c340sev xrootd]$ python3 Python 3.7.5 (default, Oct 17 2019, 12:16:48) [GCC 9.2.1 20190827 (Red Hat 9.2.1-1)] on linux Type "help", "copyright", "credits" or "license" for more information. >>> import pkgconfig >>> print( pkgconfig.exists( 'uuid-dev' )) False Does anyone have any idea what is going on? Thank you! Adrian

5 7

google cloud print ending
by Neal Becker 26 Nov '19

26 Nov '19

So what to do now? On my android device, I installed a mopria app, and it finds my brother laser printer just fine. But to print from my linux desktop, I've never setup a system printer, just depended on printing to google cloud via chrome. From what info I found via google search, cups should just work with mopria- enabled printers (like mine). According to articles I found cups should just detect it as available network printers. So I tried it. kde printer config and system-config-printers both detect nothing as available network printers. Mopria app on my android detects it just fine. Both connected to same wifi. This is a pretty complete F31 workstation install. Any ideas how to debug this and/or fix it? Thanks, Neal

3 2

Sharing a USB drive with Samba ?
by linux guy 26 Nov '19

26 Nov '19

Hi people. I'm running Samba on Fedora 31. It's working great. I want to share a USB drive using Samba. I've tried mounting it to a directory within a Samba share and it does work due to permission errors. - I create the mount directory (USB) as a normal user, thus giving it "normal" permissions. Fore test purposes, I can r/w/x files to this directory with no problems. - I mount the USB device to the mount directory using mount /dev/sdb1 USB. - I can access the USB directory from the server and r/w/x everything just fine. - When I try to access the share/USB directory from the client, like Dolphin, it requests permission in the form of user and password. The user and password that I use to access the share do not work. Nor does the user and password I use to access the server. What am I missing ? How does one share a USB device via Samba ? Thanks

3 5

Re: (fedora) Re: sshd on F31 : strange problem with login with keys's
by Jouk Jansen 26 Nov '19

26 Nov '19

George N. White III wrote on 26-NOV-2019 14:26:34.37 >On Tue, 26 Nov 2019 at 08:36, Jouk Jansen <joukj(a)hrem.nano.tudelft.nl> >wrote: > >> Hi All, >> >> I'm trying to setup an ssh-server on F31 which logs a user in without a [snip] >> Question : why does is work with just running "/usr/sbin/sshd" but not wi= >th >> "systemctl start sshd" ? >> > >When your root ran /usr/sbin/sshd was the very long list of options used >when sshd is started by systemd included? I see: > >$ sudo systemctl status sshd |fold >=E2=97=8F sshd.service - OpenSSH server daemon > [...] > CGroup: /system.slice/sshd.service > =E2=94=94=E2=94=80994 /usr/sbin/sshd -D -oCiphers=3Daes256-gcm@o= On my machine I only get <number> /usr/sbin/sshd -D here Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

Prevent turning off external monitor when playing audio though HDMI
by Robert Mihaly 26 Nov '19

26 Nov '19

Hi everyone, I have an external monitor connected via HDMI which has better sounding speakers than the internal ones. Sometimes I leave the machine idle while keep playing audio on it, but shortly after the lock screen kicks the external monitor is turned off (power saving I guess) and the audio switches back to the internal speakers. I use Fedora Workstation 31, Gnome 3.34.1, PulseAudio 13.0, Kernel 5.3.11. Does anyone know about a way to prevent turning off the external monitor when audio is being played through the HDMI port? I would still like to have the lock screen, even blanking it, but without turning it off and keep using the external monitor speakers. Currently I use Spotify from Flathub for playing music and when I make a break and leave the music on, after few minutes it switches back to the internal speakers, that have worse quality especially if I am away from the machine. I have seen this same question raised in other forums [1][2][3], but couldn't see solutions, so wanted to try to ask here in case anyone knows a way to deal with this. [1] https://askubuntu.com/questions/1165801/dpms-and-hdmi-audio [2] https://trac.videolan.org/vlc/ticket/10865 [3] https://gitlab.freedesktop.org/pulseaudio/pulseaudio/issues/451 Thanks, Robert

3 7

Re: (fedora) Re: sshd on F31 : strange problem with login with keys's
by Jouk Jansen 26 Nov '19

26 Nov '19

Sam Varshavchik wrote on 26-NOV-2019 14:09:36.69 >Jouk Jansen writes: > >> Hi All, >> >> I'm trying to setup an ssh-server on F31 which logs a user in without a >> password, but with a key-exchange. I generated all the keys and placed them >> in the right locations. It still asks for the password. >> >> Than comes the strange : I stoped the service by "systemctl stop sshd" and >> did run "as root" /usr/sbin/sshd. And than it just worked. (tried to stop >> and start with systemctl again made the passwordless login fail again) >> >> Question : why does is work with just running "/usr/sbin/sshd" but not with >> "systemctl start sshd" ? > >Perhaps the actual command and set up, from sshd.service, will offer a clue: > >EnvironmentFile=-/etc/crypto-policies/back-ends/opensshserver.config >EnvironmentFile=-/etc/sysconfig/sshd-permitrootlogin >EnvironmentFile=-/etc/sysconfig/sshd >ExecStart=/usr/sbin/sshd -D $OPTIONS $CRYPTO_POLICY $PERMITROOTLOGIN > >That's what systemctl start sshd does. /etc/crypto-policies/back-ends/opensshserver.config is the default file of the system. /etc/sysconfig/sshd-permitrootlogin does not exists (and we do not try to logon as root anyway. /etc/sysconfig/sshd : In this file the CRYPTO_POLICY= line is uncommented to allow for more cyphers. (I try to connect from a machine with not the newest cyphers (yes I know the risk)) It used to work on a F30 system, which crashed and is now fresh installed with F31. Can it be that I have to add more cyphers to the /etc/ssh/sshd_conf files? (the public key from the client machine starts with : ssh-rsa) Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

USB wireless rtl8822b Driver strange
by Robert McBroom 26 Nov '19

26 Nov '19

Compiled driver from GitHub for USB wireless from FayTun. The device is recognized and connects. The console gets a stream as follows: [ 2660.527388] RTW: Turbo EDCA =0xa42b [ 2660.528982] RTW: rtw_set_ps_mode(wlp0s29f7u7) Leave 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2660.528989] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2660.528993] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = ACTIVE, drv ps mode = 0, rlbm = 0 , smart_ps = 0, allQueueUAPSD = 0 [ 2660.539019] RTW: rtw_set_ps_mode(wlp0s29f7u7) Enter 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2660.539028] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2660.539033] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = LPS, drv ps mode = 2, rlbm = 1 , smart_ps = 2, allQueueUAPSD = 0 [ 2662.575459] RTW: rtw_set_ps_mode(wlp0s29f7u7) Leave 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2662.575468] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2662.575473] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = ACTIVE, drv ps mode = 0, rlbm = 0 , smart_ps = 0, allQueueUAPSD = 0 [ 2662.584957] RTW: rtw_set_ps_mode(wlp0s29f7u7) Enter 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2662.584964] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2662.584968] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = LPS, drv ps mode = 2, rlbm = 1 , smart_ps = 2, allQueueUAPSD = 0 [ 2664.623527] RTW: rtw_set_ps_mode(wlp0s29f7u7) Leave 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2664.623537] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2664.623542] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = ACTIVE, drv ps mode = 0, rlbm = 0 , smart_ps = 0, allQueueUAPSD = 0 [ 2664.633524] RTW: rtw_set_ps_mode(wlp0s29f7u7) Enter 802.11 power save - WIFI-LPS_CTRL_PHYDM [ 2664.633530] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): HW port id=0 [ 2664.633535] RTW: rtl8822b_set_FwPwrMode_cmd(wlp0s29f7u7): fw ps mode = LPS, drv ps mode = 2, rlbm = 1 , smart_ps = 2, allQueueUAPSD = 0 This continues forever until the device is disabled, ifconfig doesn't show any errors. What is this behavior?

2 1

New fedora 31 install hangs on shutdown
by S.Bob 25 Nov '19

25 Nov '19

Hi all; I've just installed Fedora 31, on a thinkpad P51s Every time I shutdown it hangs with the following text and never powers off. Any thoughts on how to debug this? Thanks in advance. Nov 25 08:07:21 F31host kernel: ------------[ cut here ]------------ Nov 25 08:07:21 F31host kernel: nouveau 0000:02:00.0: timeout Nov 25 08:07:21 F31host kernel: WARNING: CPU: 3 PID: 1005 at drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmgf100.c:221 gf100_vmm_invalidate+0x1a6/0x1c0 [nouveau] Nov 25 08:07:21 F31host kernel: Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute ip6ta ble_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat iptable_mangle iptable_raw iptable_security nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 li bcrc32c cmac ip_set nfnetlink ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter bnep sunrpc rmi_smbus rmi_core vfat fat x86_pkg_temp_thermal intel_ powerclamp coretemp kvm_intel snd_soc_skl snd_soc_hdac_hda snd_hda_ext_core kvm snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_acpi_intel_match snd_hda_co dec_hdmi snd_soc_acpi iwlmvm iTCO_wdt mei_hdcp mei_wdt irqbypass snd_soc_core snd_hda_codec_realtek iTCO_vendor_support snd_hda_codec_generic intel_rapl_msr snd_co mpress mac80211 ac97_bus snd_pcm_dmaengine snd_hda_intel crct10dif_pclmul snd_hda_codec crc32_pclmul snd_hda_core libarc4 ghash_clmulni_intel btusb snd_hwdep iwlwi fi uvcvideo intel_cstate btrtl snd_seq Nov 25 08:07:21 F31host kernel: intel_uncore videobuf2_vmalloc videobuf2_memops snd_seq_device videobuf2_v4l2 btbcm intel_rapl_perf snd_pcm btintel thinkpad_acpi v ideobuf2_common bluetooth videodev snd_timer intel_wmi_thunderbolt wmi_bmof joydev ledtrig_audio i2c_i801 cfg80211 thunderbolt ucsi_acpi mc mei_me typec_ucsi ecdh_ generic processor_thermal_device ecc mei intel_xhci_usb_role_switch intel_rapl_common roles intel_soc_dts_iosf intel_pch_thermal typec snd soundcore rfkill int3403 _thermal int340x_thermal_zone int3400_thermal acpi_thermal_rel acpi_pad ip_tables i915 nouveau mxm_wmi ttm i2c_algo_bit drm_kms_helper nvme crc32c_intel e1000e drm nvme_core uas serio_raw usb_storage wmi video Nov 25 08:07:21 F31host kernel: CPU: 3 PID: 1005 Comm: Xorg Tainted: G W 5.3.7-301.fc31.x86_64 #1 Nov 25 08:07:21 F31host kernel: Hardware name: LENOVO 20LBCTO1WW/20LBCTO1WW, BIOS N27ET24W (1.10 ) 03/15/2018 Nov 25 08:07:21 F31host kernel: RIP: 0010:gf100_vmm_invalidate+0x1a6/0x1c0 [nouveau] Nov 25 08:07:21 F31host kernel: Code: 8b 40 10 48 8b 78 10 4c 8b 6f 50 4d 85 ed 75 03 4c 8b 2f e8 fc 6b 14 c1 4c 89 ea 48 c7 c7 02 10 68 c0 48 89 c6 e8 58 77 bc c0 <0f> 0b e9 6d ff ff ff e8 6e 74 bc c0 66 66 2e 0f 1f 84 00 00 00 00 Nov 25 08:07:21 F31host kernel: RSP: 0018:ffffaa90818278c8 EFLAGS: 00010282 Nov 25 08:07:21 F31host kernel: RAX: 0000000000000000 RBX: ffff9c0063630c00 RCX: 0000000000000006 Nov 25 08:07:21 F31host kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff9c006e2d7900 Nov 25 08:07:21 F31host kernel: RBP: 0000000000000001 R08: 0000000000000001 R09: 00000000000006f7 Nov 25 08:07:21 F31host kernel: R10: 00000000000274c8 R11: 0000000000000003 R12: ffff9c0062cdbe20 Nov 25 08:07:21 F31host kernel: R13: ffff9c0069f2b320 R14: ffff9c004c3ba480 R15: ffff9c004c3baac0 Nov 25 08:07:21 F31host kernel: FS: 00007f3791d85f00(0000) GS:ffff9c006e2c0000(0000) knlGS:0000000000000000 Nov 25 08:07:21 F31host kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Nov 25 08:07:21 F31host kernel: CR2: 0000564110b0b140 CR3: 000000084b910003 CR4: 00000000003606e0 Nov 25 08:07:21 F31host kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Nov 25 08:07:21 F31host kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Nov 25 08:07:21 F31host kernel: Call Trace: Nov 25 08:07:21 F31host kernel: nvkm_vmm_iter.constprop.0+0x34b/0x810 [nouveau] Nov 25 08:07:21 F31host kernel: ? __switch_to_asm+0x34/0x70 Nov 25 08:07:21 F31host kernel: ? nvkm_vmm_map_choose+0x90/0x90 [nouveau] Nov 25 08:07:21 F31host kernel: ? gp100_vmm_pd0_sparse+0xd0/0xd0 [nouveau] Nov 25 08:07:21 F31host kernel: ? account_entity_enqueue+0x9c/0xd0 Nov 25 08:07:21 F31host kernel: nvkm_vmm_ptes_unmap_put+0x2c/0x40 [nouveau] Nov 25 08:07:21 F31host kernel: ? nvkm_vmm_map_choose+0x90/0x90 [nouveau] Nov 25 08:07:21 F31host kernel: ? gp100_vmm_pd0_sparse+0xd0/0xd0 [nouveau] Nov 25 08:07:21 F31host kernel: nvkm_vmm_put_locked+0x1c5/0x210 [nouveau] Nov 25 08:07:21 F31host kernel: nvkm_uvmm_mthd+0x4ec/0x780 [nouveau] Nov 25 08:07:21 F31host kernel: nvkm_ioctl+0xde/0x180 [nouveau] Nov 25 08:07:21 F31host kernel: nvif_object_mthd+0x104/0x130 [nouveau] Nov 25 08:07:21 F31host kernel: ? __wake_up_common_lock+0x8a/0xc0 Nov 25 08:07:21 F31host kernel: nvif_vmm_put+0x5c/0x80 [nouveau] Nov 25 08:07:21 F31host kernel: nouveau_vma_del+0x70/0xc0 [nouveau] Nov 25 08:07:21 F31host kernel: nouveau_gem_object_close+0x206/0x230 [nouveau] Nov 25 08:07:21 F31host kernel: drm_gem_object_release_handle+0x35/0xb0 [drm] Nov 25 08:07:21 F31host kernel: drm_gem_handle_delete+0x4f/0x80 [drm] Nov 25 08:07:21 F31host kernel: ? drm_mode_destroy_dumb+0x40/0x40 [drm] Nov 25 08:07:21 F31host kernel: drm_ioctl_kernel+0xaa/0xf0 [drm] Nov 25 08:07:21 F31host kernel: drm_ioctl+0x208/0x390 [drm] Nov 25 08:07:21 F31host kernel: ? drm_mode_destroy_dumb+0x40/0x40 [drm] Nov 25 08:07:21 F31host kernel: ? unmap_region+0xdc/0x110 Nov 25 08:07:21 F31host kernel: nouveau_drm_ioctl+0x63/0xb0 [nouveau] Nov 25 08:07:21 F31host kernel: do_vfs_ioctl+0x405/0x660 Nov 25 08:07:21 F31host kernel: ksys_ioctl+0x5e/0x90 Nov 25 08:07:21 F31host kernel: __x64_sys_ioctl+0x16/0x20 Nov 25 08:07:21 F31host kernel: do_syscall_64+0x5f/0x1a0 Nov 25 08:07:21 F31host kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Nov 25 08:07:21 F31host kernel: RIP: 0033:0x7f37921fc2fb Nov 25 08:07:21 F31host kernel: Code: 0f 1e fa 48 8b 05 8d 9b 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 5d 9b 0c 00 f7 d8 64 89 01 48 Nov 25 08:07:21 F31host kernel: RSP: 002b:00007ffe6cf04068 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 Nov 25 08:07:21 F31host kernel: RAX: ffffffffffffffda RBX: 00007ffe6cf040a4 RCX: 00007f37921fc2fb Nov 25 08:07:21 F31host kernel: RDX: 00007ffe6cf040a4 RSI: 00000000c00464b4 RDI: 0000000000000014 Nov 25 08:07:21 F31host kernel: RBP: 00000000c00464b4 R08: 0000000000000007 R09: 0000000000000010 Nov 25 08:07:21 F31host kernel: R10: 00007f37919840d4 R11: 0000000000003246 R12: 0000000000000014 Nov 25 08:07:21 F31host kernel: R13: 0000000000000014 R14: 000056410ffc56d8 R15: 00007ffe6cf04298 Nov 25 08:07:21 F31host kernel: ---[ end trace 909e136eda4a9517 ]--- Nov 25 08:07:22 F31host run-initial-setup[1000]: ..(II) Server terminated successfully (0). Closing log file. Nov 25 08:07:23 F31host abrt-dump-journal-oops[846]: abrt-dump-journal-oops: Found oopses: 1 Nov 25 08:07:23 F31host abrt-dump-journal-oops[846]: abrt-dump-journal-oops: Creating problem directories Nov 25 08:07:23 F31host abrt-server[1248]: Oops looks like a problem in kernel module, new component xorg-x11-drv-nouveau Nov 25 08:07:23 F31host abrt-server[1248]: Can't find a meaningful backtrace for hashing in '.' Nov 25 08:07:23 F31host abrt-server[1248]: Option 'DropNotReportableOopses' is not configured Nov 25 08:07:23 F31host abrt-server[1248]: Preserving oops '.' because DropNotReportableOopses is 'no' Nov 25 08:07:23 F31host abrt-notification[1265]: System encountered a non-fatal error in ??()

2 1

What does a highlighted directory in ls in Konsole mean ?
by linux guy 25 Nov '19

25 Nov '19

Hi people. I'm loving Fedora 31. Kudos to the developers, testers and everyone involved. Great work ! Much appreciated ! Sometimes when I ls in Konsole the directory is highlighted. Why is it highlighted ? Thanks

3 7

filter for up-arrow in terminal
by SternData 25 Nov '19

25 Nov '19

A long time ago, in an operating system far, far away I used a tool called PCED. It had one really nice feature: If I had typed a command like copy a b it saved it, just like bash does. But when I typed copy and pressed up-arrow, it would filter the history entries and show only those that started with "copy". I'm already using autojump for the cd command. Is there something to provide this filter on using up-arrow to scroll through past commands? -- -- Steve

3 3

Fedora 31 - pam_u2f - Yubikey 5
by Winfried de Heiden 25 Nov '19

25 Nov '19

Hi all, Using Fedora 31, pam_u2f and a Yubikey5 works well after: authselect select sssd with-mkhomedir with-pam-u2f with-sudo without- nullok and pamu2fcfg –u[username] > ~/.config/Yubico/u2f_keys However, from the console (without GDM, multi-user.target for example) it does not work: Linux will ask for my password where the yubikey should be sufficient. Any ideas what could be wrong? Winfried

1 1

system clock out of sync after a reboot
by Sam Varshavchik 25 Nov '19

25 Nov '19

I have chrony running and pointing to my ISP's time server, not the Fedora pool, so it's always the same NTP server. This box is up 24/7, and I just rebooted it. And I get this, after a reboot: Nov 23 08:53:10 shorty chronyd[992]: System clock TAI offset set to 37 seconds Nov 23 08:53:10 shorty chronyd[992]: System clock wrong by -5.652285 seconds, adjustment started Nov 23 08:53:10 shorty chronyd[992]: System clock was stepped by -5.652285 seconds This was a reboot, and not a shutdown. I believe that something should be saving the system time to the hardware clock, so after a reboot things are more or less where they are, and this looks like is not happening. I should not have chrony adjust time by that much after a reboot. Anyone know where to investigate this further?

6 12

how can I use a live usb to update ?
by Sean Darcy 24 Nov '19

24 Nov '19

I upgraded 29-> 30. Now I can't even get to the boot screen. I've made a live usb stick, but the stick only wants to install a completely new system. Is there any way to use the stick to troubleshoot the existing installation. If I had to guess the upgrade screwed up the the UEFI boot. I can boot to bios, but not to the boot loader.

5 10

Radiotray no sound
by Paul Smith 24 Nov '19

24 Nov '19

Dear All, Radiotray on my machine running Fedora 31 does not output any sound. However, everything regarding sound on my computer works fine (e.g., YouTube, VLC, etc.) Any ideas? Thanks in advance, Paul

2 2

Keyboard Shortcuts
by Simon Colston 24 Nov '19

24 Nov '19

Fedora Workstation 31 GNOME My installation has a default of English (UK) but occasionally I use Japanese so I installed Japanese language support. When using the Japanese IME one of the keyboard shortcuts is Alt+`. However, when I use this it brings up an application switch screen. I looked through the Settings -> Devices -> Keyboard Shortcuts but there is nothing defined for Alt+`. I also noticed that "Switch Application" is set to Super+Tab (which works) but Alt+Tab does the same thing even though this is not defined anywhere. So my question is, how can I disable these unwanted keyboard shortcuts? -- Simon

4 7

24 hour time in Thunderbird -
by Bob Goodwin 23 Nov '19

23 Nov '19

How to configure 24 hour time, instead of AM/PM, in Thunderbird 62.2.0 nd/or 62.2.2. Presently I have created /usr/bin/thunderbird24h: /usr/bin/thunderbird24h: #!/bin/sh LC_TIME=C export LC_TIME /usr/bin/thunderbird and rebooted but the AM/PM time is still being used. Have I nissed something or has something changed since Fedora-20?

8 24

.bash_profile: line execution based on su vs. direct login.
by home user 22 Nov '19

22 Nov '19

(Fedora-30) good morning, My .bash_profile looks like this: --------------- # .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/.local/bin:$HOME/bin export PATH ksysguard & # the end. --------------- But I want the KSysGuard to be launched only when: * the session is interactive (not batch, cron, anacron, or at); and * it's a direct login from the login screen, not an "su" connection. How do I do that in my .bash_profile? That is, ----- if [ what goes here? ]; then ksysguard & fi ----- How do I, within the .bash_profile if test, distinguish su connection vs. direct login from the login screen? Bill.

7 26

Thunderbird and duplicate messages
by Alex 21 Nov '19

21 Nov '19

Hi, I have a fedora30 desktop with Thunderbird 68.1.1 (64-bit), although I'm not sure the version matters. It's configured to connect using IMAP to a dovecot system also on fedora30. The problem is that when Thunderbird is open on multiple computers (the other is my Windows laptop), virtually every message received is duplicated. I'm not entirely surprised, considering two systems are competing for the same connection. However, this doesn't happen with my K-9 client on my phone with Thunderbird also open on my desktop. Perhaps someone knows of a Thunderbird or dovecot setting that maybe closes the connection when it's done updating, or some other configuration option that prevents this?

3 2

Order of Users Displayed in Gnome Login Screen
by Tim Evans 21 Nov '19

21 Nov '19

I reported this at the time I upgraded my two systems to F30, and find that it's still true with F31. On my main (desktop) machine, there are two users, one of which (me) is flagged as the administrative user; the other is a mere mortal. My userid was displayed on the Gnome login screen; the other accessible by clicking the "Not shown" link on the screen. After the F29->F30 upgrade, the order of the two users was reversed, with the non-admin user displayed by default. My own account is accessible via the "Not shown" link. This has not changed after my in-place (via dnf) upgrade to F31. The secondary, non-admin user is displayed as the default login on the login screen. On my other system, a laptop, there was only one user account created prior to the F29-F30 upgrade. When I ran the F29->F30 upgrade and rebooted, I was FORCED to create a (new) admin user account, despite there being one admin user already there. The new user now appears first on the Gnome login screen; the existing user is accessible, again, via the "Not shown" link. This did not change after my in-place (via dnf) upgrade to F31. The newly-created userid is displayed as the default login on the login screen. While the extra click on "Not shown" is not a major big deal, I'm unable to figure out how to flip-flop the two userids on the systems so that the primary user appears on the login screen. Suggestions/discussion welcome. Thanks. -- Tim Evans |5 Chestnut Court 443-394-3864 |Owings Mills, MD 21117

4 5

USB flakes out?
by Tom Horsley 21 Nov '19

21 Nov '19

I'm now running fedora 31 on my system at home and at work. On both systems I occasionally notice all my xinput settings have reverted to default, as if I unplugged my mouse and plugged it back in (even though I didn't unplug it). Has anyone else noticed USB weirdness like this? Looking at dmesg, that seems to be what the kernel thinks happened: [ 36.142138] 8021q: 802.1Q VLAN Support v1.8 [ 36.188272] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s29u1u2: link becomes ready [28350.784597] usb 2-1-port5: disabled by hub (EMI?), re-enabling... [28350.784606] usb 2-1.5: USB disconnect, device number 4 [28350.979282] usb 2-1.5: new low-speed USB device number 6 using ehci-pci [28351.063350] usb 2-1.5: New USB device found, idVendor=047d, idProduct=1020, bcdDevice= 1.00 [28351.063355] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [28351.063358] usb 2-1.5: Product: Kensington Expert Mouse [28351.063360] usb 2-1.5: Manufacturer: Kensington [28351.066182] input: Kensington Kensington Expert Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:047D:1020.0005/input/input21 [28351.066409] hid-generic 0003:047D:1020.0005: input,hidraw1: USB HID v1.10 Mouse [Kensington Kensington Expert Mouse] on usb-0000:00:1d.0-1.5/input0 Looks like a little less than 8 hours after the booted, the kernel decided I just disconnected and reconnected the mouse. I have no idea what an EMI is, but that's what starts everything.

9 24

Nvidia driver irritation
by Tom Horsley 21 Nov '19

21 Nov '19

I turn my display port connected monitor off over night and when I turn it back on in the morning, I get no video (no valid video anyway). This used to happen a while back, then it stopped, now it is happening again. I find this nonsense in the Xorg.0.log: ... [ 53942.071] (WW) NVIDIA(0): MetaMode [ 53942.071] (WW) NVIDIA(0): "DP-0:nvidia-auto-select{ViewPortIn=1366x768,ViewPortOut=3840x2158+0+1}" [ 53942.071] (WW) NVIDIA(0): could not be re-validated against the current hardware [ 53942.071] (WW) NVIDIA(0): configuration; removing. It was talking to it fine, but now it wants to "re-validate?" Since the monitor is powered off, it is no wonder it can't re-validate :-). Any obscure nvidia driver options I can use to make it stop the "re-validation" nonsense? If I download the EDID and load it from lib/firmware on the kernel command line, will that make the driver happy even when the monitor is off? (Or with nvidia not doing KMS do I need to point at the EDID in the xorg.conf.d directory)

2 1

passwd
by Patrick Dupre 20 Nov '19

20 Nov '19

Hello, When I run nextcloud, I get: "the password you use to log in to your computer no longer matches that of your login keyring" It was not too much an issue when I was able to cancel the request, but for 2 days now, I am even not able kill the request. I have to kill the nextcloud application through a text terminal. Can somebody help me? Thank. =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

2 1

Thunderbird and text messages -
by Bob Goodwin 19 Nov '19

19 Nov '19

I communicate with others during the day via text messaging via Thunderbird. I simply address them with 'phonenumber(a)vzwpix.com and they respond using my fastmail.us email address, this is an essential feature and we have been doing it routinely for several years, it worked perfectly until Fedora-31. Now the message is received but the message itself is not displayed. I can double click on the line at the bottom that shows a .txt attachment and it will offer the option of viewing it in mousepad, a really crude method that adds extra steps. However bcc's of my own outgoing response to the text message displays as usual. Essentially the Thunderbird sees the incoming text message but does not display it, only lists it among messages. Help appreciated, Bob -- Bob Goodwin - Zuni, Virginia, USA http://www.qrz.com/db/W2BOD FEDORA-31 LINUX XFCE Fastmail

5 8

Fedora 30->31 Client ID changed
by Richard Shaw 19 Nov '19

19 Nov '19

I was wondering after I upgraded why I couldn't ssh into my workstation. I thought maybe sshd got disabled or firewall changes. Turns out that my "Client ID" changed after the upgrade and I got a different IP address from my Mikrotik router. It was VERY long, something like 23 hex numbers but after the upgrade changed to the MAC address with a 1: on the front. Anyone know why that would have happened? The other Fedora 30 installs I have are of the "long" variety and I assume I'll have to fix each one in my DHCP server after upgrading. Thanks, Richard

2 2

qemu-kvm steels my flash drives
by Todd Chester 18 Nov '19

18 Nov '19

Hi All, Fedora 31 qemu-kvm-4.1.0-5.fc31.x86_64 If I have a virtual machine running and I insert a flash drive into a USB socket, the virtual machine steels the flash drive from the host, not that it will actually work in the VM, which they don't. To get them to work in my VM's I have to add them as a piece of hardware to my configuration, then they work. I have to exit all my VM's to be able to see my flash drives again from the hosts system (FC31). This is a pain in the neck. Any way around this? Many thanks, -T

4 24

NFS-mounting from a QEMU/KVM guest
by Patrick O'Callaghan 18 Nov '19

18 Nov '19

This is quite embarrassing, but I'm banging my head against a wall and hoping other eyes will spot some obvious mistake. I have an F31 guest (fedora30) running in QEMU/KVM on an F31 host (Bree). I want to mount a host directory via NFS in the guest. I set this up a long time ago and it has worked through several Fedora releases without issue, but in a fit of spring cleaning I did a fresh install of F31 rather than my usual update, so of course now it doesn't work. Clearly I did something right back in the day and have now forgotten what it was. The guest can ping the host and ping the wider Internet, so basic connectivity works (this is via a NAT-style connection). The host can ssh into the guest. Firewall setup on the host: [poc@Bree ~]$ firewall-cmd --list-all home (active) target: default icmp-block-inversion: no interfaces: enp3s0 sources: services: dhcp dhcpv6-client dns libvirt mdns mountd nfs nfs3 plex rpc-bind rsyncd samba samba-client ssh ports: protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: And on the guest: [poc@fedora30 ~]$ sudo firewall-cmd --list-all home (active) target: default icmp-block-inversion: no interfaces: enp1s0 sources: services: dhcpv6-client mdns samba-client ssh ports: protocols: masquerade: no forward-ports: source-ports: icmp-blocks: rich rules: Guest ip: [poc@fedora30 ~]$ ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 52:54:00:ca:07:30 brd ff:ff:ff:ff:ff:ff inet 192.168.122.156/24 brd 192.168.122.255 scope global dynamic noprefixroute enp1s0 valid_lft 2893sec preferred_lft 2893sec inet6 fe80::2e77:5bc1:d19a:6045/64 scope link noprefixroute valid_lft forever preferred_lft forever and routing: [poc@fedora30 ~]$ ip route default via 192.168.122.1 dev enp1s0 proto dhcp metric 100 192.168.122.0/24 dev enp1s0 proto kernel scope link src 192.168.122.156 metric 100 [poc@Bree ~]$ ping fedora30 PING fedora30 (192.168.122.156) 56(84) bytes of data. 64 bytes from fedora30 (192.168.122.156): icmp_seq=1 ttl=64 time=20.1 ms ... Exports on the host: [poc@Bree ~]$ sudo exportfs /home/Media 192.168.0.0/16 /home/poc/Shared vm-* /home/poc/Shared fedora* But from the guest: [poc@fedora30 ~]$ showmount -e bree clnt_create: RPC: Unable to receive What am I missing? poc

4 30

Sleep/hibernate after pre-selected idle time period
by Alex 18 Nov '19

18 Nov '19

Hi, I have a fedora30 desktop that's used infrequently throughout the day. I'd like it to go to sleep on its own after 15 minutes of inactivity. How can I do this? The install was done using defaults, so I'm using GNOME with its default applications and configuration. An option to configure this from the command-line would be appreciated, although I can also use the GUI. Thanks, Alex

3 6

F31 no longer allows user access to NetworkManager.service
by Paul-Erik Törrönen 18 Nov '19

18 Nov '19

Since today I'm no longer are able to use the F5 VPN solution. When the F5VPN is started, I get a password dialog with the text: Authentication is required to restart 'NetworkManager.service' An applicationis attempting to perform an action that requires privileges. Authentication is required to perform this action. Problem is, the VPN dies due to this, and reinitializing the VPN only results in the same dialog. This _never_ happended with previous versions of Fedora, nor did it happen with F31 prior to today (last time I used it was last Thursday). If I enter my password, the dialog goes away, but the F5VPN process has also died. When I tried to open my keyring my current password, nor any previous passwords worked, so I suspected that something has corrupted my keyring and recreated them from scratch, logged out and in again. Did not help. I downgraded NetworkManager to 1.20.4-1.fc31 and restarted. Did not help. I downgraded systemd to 243-3.gitef67743.fc31 and restarted. Did not help. How can I disable this password dialog so that it does not break F5VPN? TIA, Poltsi

2 2

Re: (fedora) Re: akmod nvidia
by Jouk Jansen 18 Nov '19

18 Nov '19

Amadeus WM wrote on 16-NOV-2019 17:46:45.71 >> 340xx is EOL and no longer supplied in F31.�� It also became unsupported in F30 with the >> advent of the 5.3 kernel. >Ah, that explains it! Thanks! I guess it's time for an upgrade. I saw this morning that akmod-nvidia-340xx has become also available for F31. (A new maintainer volunteered (thanks)) Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

DVD reading broken (?)
by Mattia Verga 18 Nov '19

18 Nov '19

What's the package responsible to read DVDs? I'm asking that because I've just realized that I cannot read video DVDs after exactly the first 1024MB... I was trying to copy a video DVD to an ISO image with k3b and it always got stuck after the first 1024MB. So I tried with other video DVDs and all behave the same. I've tried to play the DVD with VLC, but it stops after a while as described also by another user in a post [1]. I think it could be a general problem with DVD reading, not a k3b or vlc one. Which package should I open a bug against? Thanks Mattia [1] https://forum.videolan.org/viewtopic.php?t=151293

4 5

Core for a netbook??
by Beartooth 17 Nov '19

17 Nov '19

I have an old System76 netbook "starling," I think one of the first ones ever, whenever that was. Years ago. They were an Ubuntu shop then, and afaik still are; but I'm not. The first thing I did with it was to install the then current Fedora release. F30 is on it now, but I can't say it runs. It boots up, and then freezes. Local people who know things tell me it just isn't big enough any more. I got it to do email in waiting rooms; but I found I usually got my turn before I got into my email. That proved true even when the netbook was still quick; wifi in the places I waited was slow. So I guess I can afford a risk: would CoreOS be able to handle Alpine (formerly Pine from UW) and a browser or two? Maybe even Pan?? -- Beartooth Staffwright, Not Quite Clueless Power User Remember I know little (precious little!) of where up is.

4 6

Someone here using restic (Backup)
by sixpack13 17 Nov '19

17 Nov '19

hallo currently I'm doing backup's with rsync. Today "restic" got my attention and I'm thinking to move to it, cause of it's ability to verify the backup (somehow). https://github.com/restic/restic/ Is someone here who is using it and can share some experiences ?

5 16

4877 packages to update... Time to clean house?
by Richard Shaw 17 Nov '19

17 Nov '19

Working on downloading all the packages to update to Fedora 31 and noticed that I have 4877 packages (and 6GB) to update (excluding a handful of new weak dependencies). Anyone have a good workflow they use to remove unneeded packages? Thanks, Richard

5 7

Silly Web UI on Server?
by John M. Harris Jr 17 Nov '19

17 Nov '19

Does anyone know if it's possible to install the Server spin without getting Cockpit? I like the hardware support group, but I have no idea why I don't get an option to turn off that useless web UI. -- John M. Harris, Jr. Splentity

6 13

The system printing service doesn't seem to be available
by Simon Colston 17 Nov '19

17 Nov '19

Fedora 31 Workstation I installed Xfce to give it a try, didn't like it so I removed it. Unfortunately, since then, when I go to Settings -> Devices -> Printers I get the message "Sorry! The system printing service doesn't seem to be available" I did some googling and found out that CUPS is responsible for printing. The timestamp on the file /etc/cups/subscriptions.conf.O is the time I installed Xfce and the timestamp on /etc/cups/subscriptions.conf.rpmsave is the time I removed Xfce. So that's how I broke it, I guess. I now only have 2 CUPS packages installed: cups-libs.x86_64 cups-pk-helper.x86_64 Can I just install cups.x86_64 package or is there anything else I need to do to get printing working again? -- Simon

3 4

Bridged connection MAC address change after F31 update
by Sam Varshavchik 16 Nov '19

16 Nov '19

I have a fixed IP address assigned via DHCP to a machine that I just updated to F31. After the update, I was slightly surprised when it didn't come up on its fixed IP address. After looking through the logs, the DHCP server is now apparently getting a DHCP request from a different MAC address, apparently the bridge's MAC address. I updated the DHCP config, and brought the network connection down/up, and it came up on its fixed IP address, normally. In F30, the kernel was kernel-5.3.11-200.fc30.x86_64, and it's now kernel-5.3.11-300.fc31.x86_64, of course; so this doesn't look like a kernel change. The relevant data is: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vnet0 state UP group default qlen 1000 link/ether 00:30:48:fc:83:fa brd ff:ff:ff:ff:ff:ff inet6 fe80::230:48ff:fefc:83fa/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:30:48:fc:83:fb brd ff:ff:ff:ff:ff:ff 4: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 96:03:13:50:00:eb brd ff:ff:ff:ff:ff:ff inet 192.168.0.2/24 brd 192.168.0.255 scope global dynamic vnet0 valid_lft 603710sec preferred_lft 603710sec inet6 fe80::9403:13ff:fe50:eb/64 scope link valid_lft forever preferred_lft forever Up until F30, the DHCP server was seeing requests from 00:30:48:fc:83:fa, and now the DHCP server is seeing requests from 96:03:13:50:00:eb. I'm hoping that, at least, the bridge won't be getting random MAC addresses with every boot?

3 5

What to do with a non-NM managed bridge, now
by Sam Varshavchik 16 Nov '19

16 Nov '19

A very long time ago I stumbled my way into setting up a virtual bridge so that a qemu-hosted Windows 10 VM could have a static IP address assigned from my LAN's DHCP server, and be reachable from my LAN, directly. This was a while ago; to the best of my recollection at that time NetworkManager did not support bridges; or the there was some other reason the bridge had to be set up that way. Well, for a reason that I'll describe separately, after updating to F31 it was necessary to manually ifdown/ifup the bridge in order to fix something. And I'm told that ifdown/ifup is being retired and I should use nmcli. But nmcli doesn't see it, of course. So, what are my options? Reconfigure my monkey-patched configuration to a NM- managed one? What I currently have is: # cat /etc/sysconfig/network-scripts/ifcfg-eth0 # Intel Corporation 82573E Gigabit Ethernet Controller (Copper) DEVICE=eth0 BRIDGE=vnet0 HWADDR=00:30:48:FC:83:FA ONBOOT=yes OPTIONS=layer2=1 TYPE=Ethernet NM_CONTROLLED=no USERCTL=no IPV6INIT=yes DEFROUTE=yes PEERDNS=yes PEERROUTES=yes IPV4_FAILURE_FATAL=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_PEERDNS=yes IPV6_PEERROUTES=yes IPV6_FAILURE_FATAL=no NAME="System eth0" #UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 BOOTPROTO=dhcp ETHTOOL_OPTS="advertise 030" and # cat ifcfg-vnet0 DEVICE=vnet0 TYPE=Bridge BOOTPROTO=dhcp ONBOOT=yes IPV6INIT=no USERCTL=no ZONE=FedoraWorkstation NM_CONTROLLED=no Currently, NetworkManager sees /something/: # nmcli c show NAME UUID TYPE DEVICE virbr0 65a32109-d944-40b1-abf8-15458f81585c bridge virbr0 And when everything's up, "ip addr" shows: 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master vnet0 state UP group default qlen 1000 link/ether 00:30:48:fc:83:fa brd ff:ff:ff:ff:ff:ff inet6 fe80::230:48ff:fefc:83fa/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:30:48:fc:83:fb brd ff:ff:ff:ff:ff:ff 4: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 96:03:13:50:00:eb brd ff:ff:ff:ff:ff:ff inet 192.168.0.2/24 brd 192.168.0.255 scope global dynamic vnet0 valid_lft 604185sec preferred_lft 604185sec inet6 fe80::9403:13ff:fe50:eb/64 scope link valid_lft forever preferred_lft forever 5: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 02:23:42:87:19:5d brd ff:ff:ff:ff:ff:ff Is this as simple as manually changing NM_CONTROLLED=yes in both initscripts? That's easy enough to do, test, and roll it back, if it blows up, but can anyone think of anything else that needs to be tweaked.

3 3

akmod nvidia
by Amadeus WM 16 Nov '19

16 Nov '19

I have an older nvidia card and I'm using the proprietary drivers with akmod from rpmfusion. akmod-nvidia-340xx-340.107-8.fc30.x86_64 xorg-x11-drv-nvidia-340xx-kmodsrc-340.107-4.fc30.x86_64 xorg-x11-drv-nvidia-340xx-libs-340.107-4.fc30.x86_64 xorg-x11-drv-nvidia-340xx-340.107-4.fc30.x86_64 kmod-nvidia-340xx-5.2.18-200.fc30.x86_64-340.107-8.fc30.x86_64 Every time the kernel gets updated, akmod does its thing, builds the kmod-nvidia rpm and all is well. Except for 5.3 kernels, akmod fails to build. For instance, in /var/cache/akmods/nvidia-340xx/340.107-8-for-5.3.11-200.fc30.x86_64.failed.log I see 2019/11/15 21:07:34 akmodsbuild: /tmp/akmodsbuild.LuUtkSzx/BUILD/nvidia-340xx-kmod-340.107/_kmod_build_5.3.11-200.fc30.x86_64/nv-linux.h: In function 'nv_execute_on_all_cpus': 2019/11/15 21:07:34 akmodsbuild: /tmp/akmodsbuild.LuUtkSzx/BUILD/nvidia-340xx-kmod-340.107/_kmod_build_5.3.11-200.fc30.x86_64/nv-linux.h:903:21: error: void value not ignored as it ought to be 2019/11/15 21:07:34 akmodsbuild: 903 | int __ret = on_each_cpu(func, info, wait); | ^~~~~~~~~~~ So I guess in kernel 5.3 on_each_cpu() no longer returns int, but void. The nvidia driver has not been updated to reflect that. Do I need to wait for nvidia to fix that (if they ever do, given that this is the legacy driver) or does anyone on the fedora side do any kind of back porting that can fix it? Do I file a bug with bugzilla?

3 3

Fedora 31, nextcloud-client always asking for kde wallet password after logging in
by Matti Pulkkinen 16 Nov '19

16 Nov '19

Hello! Whenever I log in to Fedora 31, nextcloud-client asks for the password for a KDE wallet. The Nextcloud client on Ubuntu never asks for a password like this, so what's different here, and how can I make it stop? -- Regards, Matti Pulkkinen

2 4

Tip: WoeUSB and FC31
by ToddAndMargo 15 Nov '19

15 Nov '19

Hi All, If you go to cut a Windows installer flash drive from iso with WoeUSB under Fedora 31, you are in for some surprises. It crashes on exit. But the good new is that the drive comes out perfectly. And it boots both Legacy and EUFI. Very sweet! After WoeUSB crashed, you need to do a DF and a umount on the open loop drive and anything else it left mounted after it crashes. I opened the following bug report on it: https://bugzilla.redhat.com/show_bug.cgi?id=1773142 -T

1 0

Gmail in Fedora-31 -
by Bob Goodwin 14 Nov '19

14 Nov '19

I have been unable to create a gmail account in Thunderbird 68 or 70 in this computer although I was able to do that when booted to Fedora-29 on a separate drive. I suspect there may be a problem of which I am not aware between google and Mozilla security? ... Or am I doing something wrong, has any one else had this problem? Bob -- Bob Goodwin - Zuni, Virginia, USA

2 6

sound bug on update with HDMI
by Cătălin George Feștilă 14 Nov '19

14 Nov '19

the sound device was gone ... the pavucontrol tool shows an input sound play but on virtual output, Dummy Output ... I don't see anything with the hardware with this tool. The arecord don't see anything: $ arecord -l arecord: device_list:272: no soundcards found... The output of lspci [mythcat@desk my_bash_scripts]$ lspci -v | grep Audio lspci: Unable to load libkmod resources: error -12 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 05:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) alsactl --force restore alsactl: load_state:1735: No soundcards found... dmesg | grep Audio [ 0.462513] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) I think is the same bug as this https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1804577 any idea?

3 6

Firefox in wayland
by antonio montagnani 14 Nov '19

14 Nov '19

shall I moveto Firefox-wayland when I use wayland? if I switch to Gnome classic what happens?? I am confused -- Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu

7 13

Fedora 30: after update aMule do not work anymore
by Dario Lesca 14 Nov '19

14 Nov '19

Start aMule via command line (amule-2.3.2-17.fc30.x86_64.rpm) aMule seem to work, but. Goto on Network (List Server) panel. After few second aMule crash (core dumped) with this error 2019-05-06 22:26:02: Initialising aMule 2.3.2 compiled with wxGTK2 v3.0.4 2019-05-06 22:26:02: Checking if there is an instance already running... 2019-05-06 22:26:02: No other instances are running. 2019- 05-06 22:26:03: ListenSocket: Ok. 2019-05-06 22:26:03: Loading temp files from /multimedia/aMule-Temp. 2019-05-06 22:26:03: All PartFiles Loaded. (amule:22764): Gtk-WARNING **: 22:26:08.945: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.945: Negative content width -1 (allocation 1, extents 1x1) while allocating gadget (node border, owner GtkFrame) (amule:22764): Gtk-WARNING **: 22:26:08.945: Negative content width -1 (allocation 1, extents 1x1) while allocating gadget (node border, owner GtkFrame) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -17 (allocation 1, extents 9x9) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -1 (allocation 1, extents 1x1) while allocating gadget (node entry, owner GtkEntry) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -33 (allocation 1, extents 17x17) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -9 (allocation 1, extents 5x5) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -33 (allocation 1, extents 17x17) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -9 (allocation 1, extents 5x5) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content width -33 (allocation 1, extents 17x17) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-WARNING **: 22:26:08.946: Negative content height -9 (allocation 1, extents 5x5) while allocating gadget (node button, owner GtkButton) (amule:22764): Gtk-CRITICAL **: 22:26:08.947: gtk_box_gadget_distribute: assertion 'size >= 0' failed in GtkScrollbarErrore di segmentazione (core dump creato) Seem some incompatibility with wxGTK2/3 Some suggest? Many thanks -- Dario Lesca (inviato dal mio Linux Fedora 29 Workstation)

2 2

Fedora 31 email text size -
by Bob Goodwin 13 Nov '19

13 Nov '19

I am trying to configure a new Fedora 31 installation and Thunderbird presents email messages with what to me appears to be a microscopic text size, I need to press 'CTL +' several times. The default text is perhaps 3 mm high on a "24 inch" screen. Nothing in the usual menu settings seem to have anyeffect. Am I the only one seeing this? Bob -- Bob Goodwin - Zuni, Virginia, USA

3 3

Creating and managing accounts in GNOME
by Alex 13 Nov '19

13 Nov '19

Hi, I'm an old-school Linux user who's always done things from the command line. I have a fedora29 desktop with GNOME and need to change the default login user. Where are the GNOME user management tools to do this? Certainly nothing in Applications except "Settings" which apparently isn't for managing users. All the documentation I have found on this no longer seems applicable. Is fedora29 now using wayland? Thanks, Alex

3 3

importing photos from camera
by Paolo Galtieri 13 Nov '19

13 Nov '19

Folks, I am having an issue with importing photos from my Nikon D90 under F30. Under F29 when I right click on the camera icon on the desktop and look at the "Open With Other Application" there was an entry for "Open With gThumb Photo Import Tool". This option is missing from F30. So I decide to use a custom command, the command being gthumb --import-photos. Now when I right click on the camera icon and look at the possible commands there is one called gthumb, with no description of what this command does, and there was no way to specify a description when I entered the command. When I select it it now allows me to import my photos. The box that says "Remember this application for "application/x-caja-link type" files is also checked. However it does not remember my selection. It continues to show "Open With gThumb Image Viewer" as the application to use when I plug my camera into my laptop. I'm using the MATE desktop. So what do I need to do to get gthumb --import-photos to actually run when I plug my camera in? Any help is appreciated. Paolo

1 0

Fedora PXE boot
by Aaron Gray 13 Nov '19

13 Nov '19

Does anyone have PXE booting working ? I am nearly there but was wondering if anyone would share their iptabels/firewall-cmd, dhcpd, and pxelinux.cfg files please ? I have everything up to the dns + http/https stage working. Many thanks in advance, Aaron -- Aaron Gray Independent Open Source Software Engineer, Computer Language Researcher, Information Theorist, and amateur computer scientist.

2 7

L2TP Could not establish IPsec tunnel
by Paul Smith 12 Nov '19

12 Nov '19

Dear All, I am trying to establish a L2TP VPN connection using libreswan on Fedora 31 to connect to a MS Windows server, but getting the problem below. Any idea? Thanks in advance, Paul -------------------------------------- seeking_src = 0, seeking_gateway = 0, has_peer = 1 conn: "ec9a3d05-1842-403a-84b5-371af56faa30" modecfgdns=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" modecfgdomains=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" modecfgbanner=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" mark=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" mark-in=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" mark-out=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" vti_iface=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" redirect-to=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" accept-redirect-to=<unset> conn: "ec9a3d05-1842-403a-84b5-371af56faa30" esp=3des-sha1 conn: "ec9a3d05-1842-403a-84b5-371af56faa30" ike=3des-sha1-modp1024 002 added connection description "ec9a3d05-1842-403a-84b5-371af56faa30" nm-l2tp[11270] <info> Spawned ipsec auto --up script with PID 11666. 002 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: initiating Main Mode 104 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: STATE_MAIN_I1: initiate 106 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: STATE_MAIN_I2: sent MI2, expecting MR2 108 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: STATE_MAIN_I3: sent MI3, expecting MR3 002 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: Peer ID is ID_IPV4_ADDR: '193.136.25.122' 004 "ec9a3d05-1842-403a-84b5-371af56faa30" #1: STATE_MAIN_I4: ISAKMP SA established {auth=PRESHARED_KEY cipher=3DES_CBC_192 integ=HMAC_SHA1 group=MODP1024} 002 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: initiating Quick Mode PSK+ENCRYPT+PFS+UP+IKEV1_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO {using isakmp#1 msgid:ca935c33 proposal=3DES_CBC-HMAC_SHA1_96 pfsgroup=MODP1024} 117 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: initiate 010 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: retransmission; will wait 0.5 seconds for response 010 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: retransmission; will wait 1 seconds for response 010 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: retransmission; will wait 2 seconds for response 010 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: retransmission; will wait 4 seconds for response 010 "ec9a3d05-1842-403a-84b5-371af56faa30" #2: STATE_QUICK_I1: retransmission; will wait 8 seconds for response nm-l2tp[11270] <warn> Timeout trying to establish IPsec connection nm-l2tp[11270] <info> Terminating ipsec script with PID 11666. nm-l2tp[11270] <warn> Could not establish IPsec tunnel.

1 0

comments in pdf
by Patrick Dupre 12 Nov '19

12 Nov '19

Hello, Would you have a suggestion for a software capable of adding comments in a pdf file? Thank =========================================================================== Patrick DUPRÉ | | email: pdupre(a)gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================

11 10

Email account identity -
by Bob Goodwin 12 Nov '19

12 Nov '19

I seem to have lost my log-in identity for "bobgoodwin(a)wildblue.net." It appears that wildblue no longer exists, having been completely absorbed by Viasat. I have received some email via that service for about fourteen years and now I am unable to create a Thunderbird account in Fedora-31, the set-up fails to accept the password I have in my notes; I guess it could be wrong, not certain ... However Thunderbird in this same computer when booted in Fedora-29 continues to run the Wildblue account and receives e-mail, most of it spam ,but some that I would prefer to leave with that address. The question is, is there a file in the .thunderbird configuration on the Fedora-29 system that accepts the Wilblue email that I could move into the latest Thunderbird in Fedora-31? Bob Bob Goodwin - Zuni, Virginia, USA

3 3

Google Cloud Printing With Cups
by Stephen Morris 12 Nov '19

12 Nov '19

Hi, Can someone tell me how I add a Google Cloud Printer to cups once I have the cupscloudprint package installed? Thankyou. regards, Steve

2 5

Fedora 31 will not shut down completely
by john.mellor＠gmail.com 12 Nov '19

12 Nov '19

I've had this problem ever since I moved up to Fedora 31 from Fedora 30. It fails to completely shutdown. It will reboot correctly, but not shutdown. It hangs with a frozen window showing a stalled rotating action indicator in Gnome, leaving the power on. The machine is an older Gateway core-i7 with 32GB ram, the original nVidia graphics card, and a larger SSD. Fedora 31 is fully up-to-date. How can I debug and/or fix this problem? Any ideas?

11 32

I wrote a blog on why we moved Fedora 31 to cgroup V2
by Daniel Walsh 11 Nov '19

11 Nov '19

https://www.redhat.com/sysadmin/fedora-31-control-group-v2 If you like it, please put it out on social media.

1 0

Upgrade F30 to F31
by Clifford Snow 10 Nov '19

10 Nov '19

Yesterday I upgraded to F31 after doing a backup. The upgrade was quick and smooth. So of the minor details: I was running Postgresql 11 which as upgraded to 12. PostGIS 3.0 was installed but I still needed to manually run in psql "ALTER EXTENSION postgis UPDATE;" and "ALTER EXTENSION postgis_topology UPDATE;" to complete the upgrade. Gnome 3.34.1 seems faster but I don't have any data to back that up. I'm still experiencing periods where Gnome screen hangs even though the mouse and keyboard inputs are still being recognized. Not sure what is causing - it's just a minor annoyance. Switching from python2 to python3 affected just one of my shell scripts. For right now, I just changed from python <script.py> to python2 <script.py> Later I'll upgrade the script to version 3. In F30 I was running a gnome extension Dock or Dash to Dock. (I can't remember which) Dock remains as an extension but doesn't work so gnome is the default configuration. I miss having the application icons on the bottom of my screen. Best, Clifford -- @osm_washington www.snowandsnow.us OpenStreetMap: Maps with a human touch

2 3

repeated Wayland crashes, but can't report
by SternData 10 Nov '19

10 Nov '19

Is there a problem in the backtrace server? --- Running report_uReport --- ('report_uReport' completed successfully) --- Running analyze_CCpp --- Ok to upload core dump? (It may contain sensitive data). If your answer is 'No', a stack trace will be generated locally. (It may download a huge amount of data). 'YES' Querying server settings Preparing an archive to upload Uploading 2.0 MiB Upload successful Retrace job started Preparing environment for backtrace generation ..... Retrace job failed Retrace failed. Try again later and if the problem persists report this issue please. 2019-11-10 15:54:21 Analyzing crash data 2019-11-10 15:54:26 INFO:faf.Coredump2Packages:Executing eu-unstrip INFO:faf.Coredump2Packages:Mapping build-ids into debuginfo packages INFO:faf.Coredump2Packages:Getting binary packages from debuginfos 2019-11-10 15:54:26 Preparing environment for backtrace generation 2019-11-10 15:55:24 /usr/bin/mock init --resultdir /srv/retrace/tasks/706024286/log --configdir /srv/retrace/tasks/706024286 exitted with 30 === OUTPUT === INFO: mock.py version 1.4.21 starting (python version = 3.6.8)... Start: init plugins INFO: selinux enabled Finish: init plugins INFO: Signal handler active Start: run Start: clean chroot Finish: clean chroot Start: chroot init INFO: calling preinit hooks INFO: enabled HW Info plugin Mock Version: 1.4.21 INFO: Mock Version: 1.4.21 Start: yum install ERROR: Command failed: # /usr/bin/yum --installroot /var/lib/mock/706024286/root/ --releasever 7.7 --skip-broken install bash cpio glibc-debuginfo abrt-addon-ccpp shadow-utils findutils gdb rpm --setopt=tsflags=nocontexts Failed to set locale, defaulting to C ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: abrt-addon-ccpp x86_64 2.13.0-1.fc31 fedora 133 k bash x86_64 5.0.7-3.fc31 fedora 1.6 M cpio x86_64 2.12-12.fc31 fedora 260 k findutils x86_64 1:4.6.0-24.fc31 fedora 520 k gdb x86_64 8.3.50.20190824-24.fc31 fedora 129 k glibc-debuginfo x86_64 2.30-5.fc31 fedora 13 M rpm x86_64 4.15.0-6.fc31 fedora 499 k shadow-utils x86_64 2:4.6-16.fc31 fedora 1.2 M Installing for dependencies: abrt x86_64 2.13.0-1.fc31 fedora 534 k abrt-dbus x86_64 2.13.0-1.fc31 fedora 73 k abrt-libs x86_64 2.13.0-1.fc31 fedora 44 k abrt-retrace-client x86_64 2.13.0-1.fc31 fedora 36 k acl x86_64 2.2.53-4.fc31 fedora 72 k alternatives x86_64 1.11-5.fc31 fedora 35 k audit-libs x86_64 3.0-0.15.20191104git1c2f876.fc31 fedora 115 k augeas-libs x86_64 1.12.0-2.fc31 fedora 417 k basesystem noarch 11-8.fc31 fedora 6.9 k boost-regex x86_64 1.69.0-9.fc31 fedora 313 k brotli x86_64 1.0.7-6.fc31 fedora 341 k bzip2-libs x86_64 1.0.8-1.fc31 fedora 40 k ca-certificates noarch 2019.2.32-3.fc31 fedora 367 k coreutils-single x86_64 8.31-6.fc31 fedora 622 k cracklib x86_64 2.9.6-21.fc31 fedora 83 k crypto-policies noarch 20191002-1.gitc93dc99.fc31 fedora 91 k cryptsetup-libs x86_64 2.2.2-1.fc31 fedora 428 k ctags x86_64 5.8-26.fc31 fedora 169 k curl-minimal x86_64 7.66.0-1.fc31 fedora 129 k cyrus-sasl-lib x86_64 2.1.27-2.fc31 fedora 102 k dbus x86_64 1:1.12.16-3.fc31 fedora 11 k dbus-broker x86_64 21-6.fc31 fedora 175 k dbus-common noarch 1:1.12.16-3.fc31 fedora 17 k dbus-libs x86_64 1:1.12.16-3.fc31 fedora 161 k dbus-tools x86_64 1:1.12.16-3.fc31 fedora 56 k device-mapper x86_64 1.02.165-1.fc31 fedora 147 k device-mapper-libs x86_64 1.02.165-1.fc31 fedora 182 k dmidecode x86_64 1:3.2-3.fc31 fedora 88 k dnf-data noarch 4.2.9-5.fc31 fedora 44 k elfutils x86_64 0.177-1.fc31 fedora 330 k elfutils-default-yama-scope noarch 0.177-1.fc31 fedora 16 k elfutils-libelf x86_64 0.177-1.fc31 fedora 191 k elfutils-libs x86_64 0.177-1.fc31 fedora 297 k expat x86_64 2.2.8-1.fc31 fedora 102 k fedora-gpg-keys noarch 31-1 fedora 100 k fedora-release noarch 31-2 fedora 11 k fedora-release-common noarch 31-2 fedora 20 k fedora-repos noarch 31-1 fedora 9.6 k file-libs x86_64 5.37-8.fc31 fedora 541 k filesystem x86_64 3.12-2.fc31 fedora 1.1 M gawk x86_64 5.0.1-5.fc31 fedora 1.2 M gdb-headless x86_64 8.3.50.20190824-24.fc31 fedora 3.7 M gdbm-libs x86_64 1:1.18.1-1.fc31 fedora 55 k glib-networking x86_64 2.62.1-1.fc31 fedora 155 k glib2 x86_64 2.62.2-1.fc31 fedora 2.6 M glibc x86_64 2.30-5.fc31 fedora 3.5 M glibc-common x86_64 2.30-5.fc31 fedora 653 k glibc-debuginfo-common x86_64 2.30-5.fc31 fedora 9.7 M glibc-langpack-zu x86_64 2.30-5.fc31 fedora 580 k gmp x86_64 1:6.1.2-10.fc31 fedora 265 k gnupg2 x86_64 2.2.17-2.fc31 fedora 2.4 M gnutls x86_64 3.6.10-1.fc31 fedora 940 k gobject-introspection x86_64 1.62.0-1.fc31 fedora 270 k gpgme x86_64 1.13.1-3.fc31 fedora 203 k grep x86_64 3.3-3.fc31 fedora 249 k gsettings-desktop-schemas x86_64 3.34.0-1.fc31 fedora 644 k gzip x86_64 1.10-1.fc31 fedora 155 k ima-evm-utils x86_64 1.2.1-2.fc31 fedora 57 k iptables-libs x86_64 1.8.3-5.fc31 fedora 57 k json-c x86_64 0.13.1-6.fc31 fedora 38 k keyutils-libs x86_64 1.6-3.fc31 fedora 31 k kmod-libs x86_64 26-4.fc31 fedora 64 k krb5-libs x86_64 1.17-45.fc31 fedora 755 k libacl x86_64 2.2.53-4.fc31 fedora 25 k libarchive x86_64 3.4.0-1.fc31 fedora 383 k libargon2 x86_64 20171227-3.fc31 fedora 30 k libassuan x86_64 2.5.3-2.fc31 fedora 69 k libattr x86_64 2.4.48-7.fc31 fedora 18 k libbabeltrace x86_64 1.5.7-2.fc31 fedora 204 k libblkid x86_64 2.34-3.fc31 fedora 160 k libcap x86_64 2.26-6.fc31 fedora 52 k libcap-ng x86_64 0.7.10-1.fc31 fedora 28 k libcom_err x86_64 1.45.3-1.fc31 fedora 28 k libcomps x86_64 0.1.11-3.fc31 fedora 80 k libcurl-minimal x86_64 7.66.0-1.fc31 fedora 254 k libdb x86_64 5.3.28-38.fc31 fedora 763 k libdb-utils x86_64 5.3.28-38.fc31 fedora 143 k libdnf x86_64 0.35.3-6.fc31 fedora 622 k libfdisk x86_64 2.34-3.fc31 fedora 211 k libffi x86_64 3.1-23.fc31 fedora 33 k libgcc x86_64 9.2.1-1.fc31 fedora 95 k libgcrypt x86_64 1.8.5-1.fc31 fedora 466 k libgomp x86_64 9.2.1-1.fc31 fedora 230 k libgpg-error x86_64 1.36-2.fc31 fedora 200 k libicu x86_64 63.2-3.fc31 fedora 9.3 M libidn2 x86_64 2.2.0-2.fc31 fedora 100 k libipt x86_64 2.0-3.fc31 fedora 57 k libksba x86_64 1.3.5-10.fc31 fedora 132 k libmodman x86_64 2.0.1-20.fc31 fedora 34 k libmodulemd x86_64 2.8.2-1.fc31 fedora 194 k libmodulemd1 x86_64 1.8.16-1.fc31 fedora 175 k libmount x86_64 2.34-3.fc31 fedora 185 k libnghttp2 x86_64 1.39.2-1.fc31 fedora 82 k libnsl2 x86_64 1.2.0-5.20180605git4a062cf.fc31 fedora 59 k libpcap x86_64 14:1.9.1-1.fc31 fedora 169 k libproxy x86_64 0.4.15-14.fc31 fedora 69 k libpsl x86_64 0.21.0-2.fc31 fedora 61 k libpwquality x86_64 1.4.2-1.fc31 fedora 101 k librepo x86_64 1.10.5-1.fc31 fedora 96 k libreport x86_64 2.11.2-1.fc31 fedora 509 k libreport-filesystem noarch 2.11.2-1.fc31 fedora 14 k libreport-plugin-systemd-journal x86_64 2.11.2-1.fc31 fedora 23 k libreport-plugin-ureport x86_64 2.11.2-1.fc31 fedora 36 k libreport-web x86_64 2.11.2-1.fc31 fedora 34 k libseccomp x86_64 2.4.1-1.fc31 fedora 82 k libselinux x86_64 2.9-5.fc31 fedora 86 k libsemanage x86_64 2.9-3.fc31 fedora 123 k libsepol x86_64 2.9-2.fc31 fedora 301 k libsigsegv x86_64 2.11-8.fc31 fedora 26 k libsmartcols x86_64 2.34-3.fc31 fedora 128 k libsolv x86_64 0.7.7-1.fc31 fedora 394 k libsoup x86_64 2.68.2-1.fc31 fedora 383 k libstdc++ x86_64 9.2.1-1.fc31 fedora 627 k libtar x86_64 1.2.20-18.fc31 fedora 39 k libtasn1 x86_64 4.14-2.fc31 fedora 72 k libtirpc x86_64 1.1.4-2.rc3.fc31 fedora 106 k libunistring x86_64 0.9.10-6.fc31 fedora 513 k libusbx x86_64 1.0.22-4.fc31 fedora 69 k libutempter x86_64 1.1.6-17.fc31 fedora 26 k libuuid x86_64 2.34-3.fc31 fedora 28 k libverto x86_64 0.3.0-8.fc31 fedora 22 k libxcrypt x86_64 4.4.10-1.fc31 fedora 126 k libxml2 x86_64 2.9.9-3.fc31 fedora 694 k libyaml x86_64 0.2.2-2.fc31 fedora 60 k libzstd x86_64 1.4.2-1.fc31 fedora 269 k lua-libs x86_64 5.3.5-6.fc31 fedora 117 k lz4 x86_64 1.9.1-1.fc31 fedora 108 k lz4-libs x86_64 1.9.1-1.fc31 fedora 66 k mpfr x86_64 3.1.6-5.fc31 fedora 220 k ncurses-base noarch 6.1-12.20190803.fc31 fedora 60 k ncurses-libs x86_64 6.1-12.20190803.fc31 fedora 331 k nettle x86_64 3.5.1-3.fc31 fedora 404 k npth x86_64 1.6-3.fc31 fedora 25 k openldap x86_64 2.4.47-3.fc31 fedora 304 k openssl x86_64 1:1.1.1d-2.fc31 fedora 647 k openssl-libs x86_64 1:1.1.1d-2.fc31 fedora 1.4 M p11-kit x86_64 0.23.16.1-2.fc31 fedora 292 k p11-kit-trust x86_64 0.23.16.1-2.fc31 fedora 144 k pam x86_64 1.3.1-18.fc31 fedora 661 k pcre x86_64 8.43-2.fc31.1 fedora 193 k pcre2 x86_64 10.33-15.fc31 fedora 256 k polkit-libs x86_64 0.116-4.fc31.1 fedora 67 k popt x86_64 1.16-18.fc31 fedora 59 k publicsuffix-list-dafsa noarch 20190417-2.fc31 fedora 56 k python-pip-wheel noarch 19.1.1-4.fc31 fedora 1.1 M python-setuptools-wheel noarch 41.2.0-1.fc31 fedora 275 k python3 x86_64 3.7.5-1.fc31 fedora 31 k python3-abrt x86_64 2.13.0-1.fc31 fedora 42 k python3-augeas noarch 0.5.0-15.fc31 fedora 27 k python3-dbus x86_64 1.2.8-6.fc31 fedora 132 k python3-dnf noarch 4.2.9-5.fc31 fedora 392 k python3-gobject-base x86_64 3.34.0-3.fc31 fedora 317 k python3-gpg x86_64 1.13.1-3.fc31 fedora 248 k python3-hawkey x86_64 0.35.3-6.fc31 fedora 98 k python3-libcomps x86_64 0.1.11-3.fc31 fedora 50 k python3-libdnf x86_64 0.35.3-6.fc31 fedora 700 k python3-libreport x86_64 2.11.2-1.fc31 fedora 53 k python3-libs x86_64 3.7.5-1.fc31 fedora 7.3 M python3-rpm x86_64 4.15.0-6.fc31 fedora 95 k qrencode-libs x86_64 4.0.2-4.fc31 fedora 61 k readline x86_64 8.0-3.fc31 fedora 206 k rpm-build-libs x86_64 4.15.0-6.fc31 fedora 98 k rpm-libs x86_64 4.15.0-6.fc31 fedora 301 k rpm-sign-libs x86_64 4.15.0-6.fc31 fedora 27 k satyr x86_64 0.29-1.fc31 fedora 118 k sed x86_64 4.5-4.fc31 fedora 291 k setup noarch 2.13.6-1.fc31 fedora 142 k source-highlight x86_64 3.1.9-1.fc31 fedora 667 k sqlite-libs x86_64 3.30.0-1.fc31 fedora 571 k systemd x86_64 243-4.gitef67743.fc31 fedora 3.8 M systemd-libs x86_64 243-4.gitef67743.fc31 fedora 525 k systemd-pam x86_64 243-4.gitef67743.fc31 fedora 167 k systemd-rpm-macros noarch 243-4.gitef67743.fc31 fedora 23 k tar x86_64 2:1.32-2.fc31 fedora 887 k tss2 x86_64 1331-2.fc31 fedora 577 k tzdata noarch 2019c-1.fc31 fedora 429 k util-linux x86_64 2.34-3.fc31 fedora 2.6 M xmlrpc-c x86_64 1.51.0-9.fc31 fedora 198 k xmlrpc-c-client x86_64 1.51.0-9.fc31 fedora 30 k xz x86_64 5.2.4-6.fc31 fedora 147 k xz-libs x86_64 5.2.4-6.fc31 fedora 90 k zchunk-libs x86_64 1.1.2-3.fc31 fedora 51 k zlib x86_64 1.2.11-20.fc31 fedora 92 k Transaction Summary ================================================================================ Install 8 Packages (+183 Dependent packages) Total download size: 100 M Installed size: 456 M ERROR You need to update rpm to handle: rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by xz-libs-5.2.4-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsmartcols-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dbus-1:1.12.16-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by abrt-addon-ccpp-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libseccomp-2.4.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gnutls-3.6.10-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by tar-2:1.32-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by boost-regex-1.69.0-9.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by xmlrpc-c-1.51.0-9.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libnghttp2-1.39.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by ca-certificates-2019.2.32-3.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by ima-evm-utils-1.2.1-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by cryptsetup-libs-2.2.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by bash-5.0.7-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by mpfr-3.1.6-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-abrt-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libreport-web-2.11.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libcurl-minimal-7.66.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libgpg-error-1.36-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by acl-2.2.53-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by rpm-sign-libs-4.15.0-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by p11-kit-0.23.16.1-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by sed-4.5-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-gobject-base-3.34.0-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by bzip2-libs-1.0.8-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by krb5-libs-1.17-45.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libselinux-2.9-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glibc-common-2.30-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libtirpc-1.1.4-2.rc3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dbus-common-1:1.12.16-3.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libfdisk-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by pam-1.3.1-18.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dbus-broker-21-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by rpm-build-libs-4.15.0-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libxcrypt-4.4.10-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libstdc++-9.2.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glib2-2.62.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by iptables-libs-1.8.3-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glibc-langpack-zu-2.30-5.fc31.x86_64 rpmlib(RichDependencies) <= 4.12.0-1 is needed by glibc-langpack-zu-2.30-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libassuan-2.5.3-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libnsl2-1.2.0-5.20180605git4a062cf.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by elfutils-default-yama-scope-0.177-1.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by zlib-1.2.11-20.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by device-mapper-1.02.165-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libreport-filesystem-2.11.2-1.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libcom_err-1.45.3-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libxml2-2.9.9-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by fedora-gpg-keys-31-1.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by elfutils-libs-0.177-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by coreutils-single-8.31-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libdb-5.3.28-38.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by keyutils-libs-1.6-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libyaml-0.2.2-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libreport-2.11.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsolv-0.7.7-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by rpm-libs-4.15.0-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by findutils-1:4.6.0-24.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by file-libs-5.37-8.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by systemd-pam-243-4.gitef67743.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libarchive-3.4.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libgomp-9.2.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by filesystem-3.12-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsepol-2.9-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libicu-63.2-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libpsl-0.21.0-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by xz-5.2.4-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsemanage-2.9-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glibc-debuginfo-common-2.30-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-augeas-0.5.0-15.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gdb-8.3.50.20190824-24.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libblkid-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libpwquality-1.4.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gobject-introspection-1.62.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by device-mapper-libs-1.02.165-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by abrt-dbus-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by kmod-libs-26-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by cpio-2.12-12.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by openldap-2.4.47-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by elfutils-0.177-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gawk-5.0.1-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by xmlrpc-c-client-1.51.0-9.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by ncurses-base-6.1-12.20190803.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libcomps-0.1.11-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gnupg2-2.2.17-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libmodulemd-2.8.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libattr-2.4.48-7.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gzip-1.10-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by zchunk-libs-1.1.2-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libverto-0.3.0-8.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gpgme-1.13.1-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-3.7.5-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by pcre-8.43-2.fc31.1.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by lua-libs-5.3.5-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libunistring-0.9.10-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by curl-minimal-7.66.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libmodman-2.0.1-20.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by cracklib-2.9.6-21.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by brotli-1.0.7-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by publicsuffix-list-dafsa-20190417-2.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by qrencode-libs-4.0.2-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by p11-kit-trust-0.23.16.1-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libdb-utils-5.3.28-38.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by crypto-policies-20191002-1.gitc93dc99.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by augeas-libs-1.12.0-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by util-linux-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by setup-2.13.6-1.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dnf-data-4.2.9-5.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-libdnf-0.35.3-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libacl-2.2.53-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by abrt-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by npth-1.6-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glib-networking-2.62.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by openssl-1:1.1.1d-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by systemd-243-4.gitef67743.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by ctags-5.8-26.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by shadow-utils-2:4.6-16.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by expat-2.2.8-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libtasn1-4.14-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python-pip-wheel-19.1.1-4.fc31.noarch rpmlib(RichDependencies) <= 4.12.0-1 is needed by python-pip-wheel-19.1.1-4.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by fedora-repos-31-1.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libbabeltrace-1.5.7-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-libs-3.7.5-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-libreport-2.11.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsoup-2.68.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by audit-libs-3.0-0.15.20191104git1c2f876.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by tzdata-2019c-1.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by openssl-libs-1:1.1.1d-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libcap-ng-0.7.10-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by lz4-libs-1.9.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libargon2-20171227-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by abrt-retrace-client-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by alternatives-1.11-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libidn2-2.2.0-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libreport-plugin-ureport-2.11.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libksba-1.3.5-10.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libdnf-0.35.3-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gdbm-libs-1:1.18.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libreport-plugin-systemd-journal-2.11.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libuuid-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by satyr-0.29-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-libcomps-0.1.11-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by grep-3.3-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by source-highlight-3.1.9-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by json-c-0.13.1-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by systemd-rpm-macros-243-4.gitef67743.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-gpg-1.13.1-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by rpm-4.15.0-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by cyrus-sasl-lib-2.1.27-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libgcrypt-1.8.5-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glibc-debuginfo-2.30-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by lz4-1.9.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by librepo-1.10.5-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by nettle-3.5.1-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libffi-3.1-23.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by readline-8.0-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libtar-1.2.20-18.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by abrt-libs-2.13.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by elfutils-libelf-0.177-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dmidecode-1:3.2-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libzstd-1.4.2-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-dbus-1.2.8-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dbus-tools-1:1.12.16-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libproxy-0.4.15-14.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libmount-2.34-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libsigsegv-2.11-8.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by fedora-release-31-2.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gdb-headless-8.3.50.20190824-24.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-hawkey-0.35.3-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by basesystem-11-8.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-rpm-4.15.0-6.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python3-dnf-4.2.9-5.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by pcre2-10.33-15.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libusbx-1.0.22-4.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libgcc-9.2.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by systemd-libs-243-4.gitef67743.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libmodulemd1-1.8.16-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by tss2-1331-2.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by sqlite-libs-3.30.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libpcap-14:1.9.1-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libutempter-1.1.6-17.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by fedora-release-common-31-2.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libipt-2.0-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by popt-1.16-18.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by glibc-2.30-5.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by python-setuptools-wheel-41.2.0-1.fc31.noarch rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by dbus-libs-1:1.12.16-3.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by gsettings-desktop-schemas-3.34.0-1.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by ncurses-libs-6.1-12.20190803.fc31.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by polkit-libs-0.116-4.fc31.1.x86_64 rpmlib(PayloadIsZstd) <= 5.4.18-1 is needed by libcap-2.26-6.fc31.x86_64 You could try running: rpm -Va --nofiles --nodigest Your transaction was saved, rerun it with: yum load-transaction /tmp/yum_save_tx.2019-11-10.15-55.4ryTYs.yumtx RPM needs to be updated 2019-11-10 15:55:26 None Do you want to generate a stack trace locally? (It may download a huge amount of data but reporting can't continue without stack trace). 'NO' ('analyze_CCpp' exited with 1) -- -- Steve

3 2

sound bug on update with HDMI
by Cătălin George Feștilă 10 Nov '19

10 Nov '19

the sound device was gone ... the pavucontrol tool shows an input sound play but on virtual output, Dummy Output ... I don't see anything with the hardware with this tool. The arecord don't see anything: $ arecord -l arecord: device_list:272: no soundcards found... The output of lspci [mythcat@desk my_bash_scripts]$ lspci -v | grep Audio lspci: Unable to load libkmod resources: error -12 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 05:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1) alsactl --force restore alsactl: load_state:1735: No soundcards found... dmesg | grep Audio [ 0.462513] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) I think is the same bug as this https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1804577 any idea?

1 0

Noscript add-on for Firefox fuzzy behaviour
by antonio montagnani 10 Nov '19

10 Nov '19

after upgrading to F31, when I use the Noscript add-on for Firefox, I note that I cannot set different options (Trusted, untrusted and so on) because mouse must be shifted left compared to the right position, I apologize if I am not clear Is anybody using Noscript add-on?? Antonio Montagnani Linux Fedora 31 (Workstation) Thunderbird 68 Fujitsu

2 5

FC31 upgrade notes
by ToddAndMargo 10 Nov '19

10 Nov '19

Hi All, Here are my upgrade notes on Fedora 30 to 31. not that they are specific to me. Let me know if you want me to expound on any of them. Hope it helps someone else: -T FC 30 -->> FC 31: https://docs.fedoraproject.org/en-US/quick-docs/dnf-system-upgrade/ # rpm --rebuilddb # rpm -Va --nofiles --nodigest if anything is too new, do a # dnf downgrade offender(s) # dnf --enablerepo=* update --refresh # dnf install python3-dnf-plugin-system-upgrade # dnf system-upgrade download --refresh --releasever=31 --allowerasing --best If there are any failures or "system-upgrade reboot" starts and reboots back into the old operating system, remove or clean up the offenders until the above completes correctly. IMPORTANT, then you must clean out the upgrade cache and start over without the "--allowerasing" and "--best" # dnf system-upgrade clean # rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-31-primary # dnf clean packages <-- optional # dnf system-upgrade -v reboot --debugsolver If a problem still exists, look through the new logs for and "CRIT" or "CRITICAL" notations /var/log/dnf.log and dnf.rpm.log for messages which may offer clues. Post upgrade: Note: the upgrade buggers up bind-chroot and perl 6 Firewall (iptables): # systemctl enable custom-firewall.service # systemctl stop custom-firewall.service # systemctl start custom-firewall.service eth.ext.rules: modify: lease_file=$(ls -t ${lease_dir}/internal*lease | sed -n 1,1p) mask=$(cat $lease_file | grep NETMASK | awk -F "=" '{print $2}') eth1_addr=$(cat $lease_file | grep -v _ADDRESS | grep ADDRESS | awk -F "=" '{print $2}') eth1_net=$(echo $eth1_addr | sed -e "s/\./ /g" | awk '{print $1"." $2"." $3".0/"}')$ETH1_MASK DHCPD=$(cat $lease_file | grep SERVER_ADDRESS | awk -F "=" '{print $2}') gateway_addr=$(cat $lease_file | grep SERVER_ADDRESS | awk -F "=" '{print $2}') # Set up (local) DNS (bind, named) outgoing querry rules $tbls -A dsl-out -o $eth1 -p tcp --dport domain -m state --state NEW,ESTABLISHED -j ACCEPT $tbls -A dsl-out -o $eth1 -p udp --dport domain -m state --state NEW,ESTABLISHED -j ACCEPT $tbls -A dsl-in -i $eth1 -p udp --sport domain -d $eth1_addr -m state --state RELATED,ESTABLISHED -j ACCEPT $tbls -A dsl-in -i $eth1 -p tcp ! --syn --sport domain -d $eth1_addr -m state --state RELATED,ESTABLISHED -j ACCEPT /etc/resolv.conf Comment out "search" and "nameserver" entries Temporarily add "nameserver 8.8.8.8" disable the firewall (eth.ext.reset) Reinstall bind and bind-chroot # dnf reinstall bind bind-chroot # systemctl enable named-chroot.service # systemctl start named-chroot.service Reenable bind's (dns) SELinux rules: # setsebool -P nis_enabled 1 # ausearch -c 'named' --raw | audit2allow -M my-named # semodule -X 300 -i my-named.pp Test with $ host google.com 127.0.0.1 /etc/resolv.conf restore commented out "search" and "nameserver" entries comment out "nameserver 8.8.8.8" Test with $ host google.com Perl 6: remove and reinstall Perl 6 (Rakudo) # dnf remove rakudo-zef rakudo # dnf install rakudo-zef rakudo Download and install the latest or desired release from: https://github.com/nxadm/rakudo-pkg/releases for example: # dnf install /home/CDs/Linux/Perl/6/rakudo-pkg-Fedora31-2019.07.1-03.x86_64.rpm Make sure all you module begin with "unit module <modlue name>;". Fedora 31 will not tolerate modules without it any more.

3 8

What happened to initramfs?
by Tom Horsley 10 Nov '19

10 Nov '19

While investigating a problem, I decided to look in my initramfs to see what modules it loaded. There ain't anything there any longer! How does this stuff work these days? [root@tomh boot]# cpio -it < initramfs-5.3.7-200.fc30.x86_64.img . early_cpio kernel kernel/x86 kernel/x86/microcode kernel/x86/microcode/GenuineIntel.bin 26 blocks That early_cpio file is a text file with nothing but a line that says "1" in it. There used to be kernel modules and scripts and stuff. I'm so confused now.

4 4

F31 upgrade non-starter
by Temlakos 09 Nov '19

09 Nov '19

Everyone: I just tried to upgrade to F31. And I couldn't get past a few seconds in the upgrade environment before it "failed out" and rebooted to F30, after touching nothing. For the record: I started by running: sudo dnf upgrade --refresh When one of my packages (a third-party package named mkvtoolnix) didn't upgrade I reran the upgrade command with two additional flags, per the explicit suggestion: sudo dnf upgrade --best --allowerasing That did it, and I have a working version of mkvtoolnix, even with its GUI apparently baked in (so that the separate mkvtoolnix-gui package is obsolete and now removed). Then I ran this command: sudo dnf system-upgrade download --refresh --releasever=31 --best --allowerasing It took many hours, but I got 2.8 gigabytes of downloads. I also imported three GPG keys. It did successful transaction check and test. Before anyone asks: I have never been able to do a successful CLI upgrade using the system-upgrade package without passing the --allowerasing switch to the download command. I passed the --best switch because it seemed to work on the upgrade command and I thought I was adding an extra measure of security. Then I ran sudo dnf system-upgrade reboot And what happened? Well, first it rebooted into the upgrade environment. And I saw the progress screen. And then, rather abruptly, the upgrade progress screen vanished. I saw a very brief message from a program called "watchdog" that went by too quickly to read. Then it rebooted into my present F30 environment. Result: I have a working system, but it's still in F30 and I don't know why it failed to start the upgrade process, or how to get it started. At the moment I have a bunch of downloads of F31 packages, all dressed up and nowhere to go. If anyone wants to see logs, I ask just one thing: tell me what are their names, and in what folder I will find them. Then I'll be happy to copy and paste them. As far as I know, nothing like this issue has shown up in Bugzilla, unless I'm missing something. Temlakos

4 9

workstation management
by Anthony F McInerney 09 Nov '19

09 Nov '19

Hi All, Apologies if I've missed something obvious. I have 5 local fedora installations (mainly the xfce spin) on various computers, i'd like to manage centrally. Looking upstream at RHEL it seems that Satellite 5 was based on spacewalk, the new version is based on foreman. I'm not particularly fond of foreman, and the installation process on fedora requires puppet, and or docker / openshift / kubernetes, or something called forklift that uses vagrant. I'd like to run it on a particularly low power server (2cores 8gb ram). Currently running Fedora Server 31. But if one of the other editions offer something for this, i'm quite happy to switch. Spacewalk looks okay, but Redhat are only supporting it until May 2020 afaict, and doesn't seem officially supported on anything later than F29. Ansible, Salt etc, are all fine, but I would like some basic info, like disk space available etc, manage updates, etc. Does anyone have any suggestions? Thanks Ant.

1 0

Firefox and H264
by Frank Elsner 09 Nov '19

09 Nov '19

Hello, the firefox of the Fedora Live system doesn't play videos which require a H.264 handler. How to enable playing of H.264 videos? Without that I can't install. And is the Fedora Workstation release better? Kind regards, Frank Elsner

2 1

mismatch in hdf packages prevent upgrade from F30->F31
by Jouk Jansen 09 Nov '19

09 Nov '19

Hi All, When performing an upgrade from F30 to F31 on one of my machines the upgrade process tries to install (yes an install not an upgrade) the packages hdf.x86-64 and hdf.i686. This fails due to a mismatch in these packages of /usr/bin/h4cc and /usr/bin/h4fc. Does anyone has an idea which other package recently got a dependence on hdf and triggers this problem? If I know I may can remove the i686 version from my system. Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

3 6

GRUB and nonstandard EFI partitions
by Kad Zayar 09 Nov '19

09 Nov '19

Hello, this is the first time I participate in a mailing list. Today I attempted installing Fedora Workstation on a friend's computer and there were some peculiar quirks to the process. - Anaconda-installer asked me for a 2MB boot partition - the resulting install had no /sys/firmware/efi. Fedora was supposed to share the machine with an existing Windows10 install thru UEFI not BIOS. Turns out, his EFI partition is on /dev/sda2, while /dev/sda1 is some ms recovery system bloat. This makes scripts like os-prober unhappy (according to logs) and makes the system believe it's MBR because the fiilelsystem format of assumed /dev/sda1 does not match. We discovered this when we realised that Windows won't show as a grub entry no matter what. Now I could alter the partition table with sfdisk(8), to make /dev/sda1 point at the EFI partition, but I'm hoping you guys know a less hacky way (with grub itself maybe). altering Windows partitions is not something he's comfortable with, while reinstalling Fedora is not a problem (he still hasn't made it his own). Thanks!

4 5

how to fix error systemd-modules-load
by Cătălin George Feștilă 09 Nov '19

09 Nov '19

this is the error on dmesg [ 15.063818] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 15.064239] systemd[1]: Failed to start Load Kernel Modules. I try to restart it but I got this: [root@desk mythcat]# systemctl restart systemd-modules-load Job for systemd-modules-load.service failed because the control process exited with error code. See "systemctl status systemd-modules-load.service" and "journalctl -xe" for details. The journalctl -xe come with this: -- The process' exit code is 'exited' and its exit status is 1. Nov 09 16:04:02 desk systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. -- Subject: Unit failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- The unit systemd-modules-load.service has entered the 'failed' state with result 'exit-code'. Nov 09 16:04:02 desk systemd[1]: Failed to start Load Kernel Modules. -- Subject: A start job for unit systemd-modules-load.service has failed -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit systemd-modules-load.service has finished with a failure. -- -- The job identifier is 2647 and the job result is failed. Nov 09 16:04:16 desk systemd[1]: Starting Load Kernel Modules... -- Subject: A start job for unit systemd-modules-load.service has begun execution -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- A start job for unit systemd-modules-load.service has begun execution. -- -- The job identifier is 2651. Nov 09 16:04:16 desk systemd-modules-load[5606]: Failed to lookup module alias 'fuse': Function not implemented Nov 09 16:04:16 desk systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE -- Subject: Unit process exited -- Defined-By: systemd -- Support: https://lists.freedesktop.org/mailman/listinfo/systemd-devel -- -- An ExecStart= process belonging to unit systemd-modules-load.service has exited. -- -- The process' exit code is 'exited' and its exit status is 1.

2 1

grub2 always defaults to old kernel despite correct configuration
by Not Random 09 Nov '19

09 Nov '19

Hello, I've had a confusing problem with grub2 for some time now. I'm now running Fedora 31, but ever since upgrading to to Fedora 30 grub has always defaulted to selecting the 3rd entry. This means that unless I stop it, Grub will always boot my oldest installed kernel. * My system is dual boot with Windows 8.1, which grub detects perfectly. (This means there are 5 entries; 3 kernel, 1 memtest and 1 Windows) * I've tried moving all the grub configuration files aside and reinstalling the package, but nothing changes. Tried grub2-mkconfig etc but nothing changes. * I've had multiple kernel updates during this time but nothing changes. * Grubby seems to thing the default kernel is selected...but grub never boots it: # grubby --grub2 --default-kernel /boot/vmlinuz-5.3.7-301.fc31.x86_64 # rpm -q kernel kernel-5.2.18-200.fc30.x86_64 kernel-5.3.7-200.fc30.x86_64 kernel-5.3.7-301.fc31.x86_64 I've tried searching for solutions, but cannot find anything like this problem - most articles address choosing a permanent kernel entry - I want Fedora to go back to selecting the newest kernel by default, like it did in Fedora 29 and previous versions. Can anyone tell me where to investigate please? Thanks! Frustrated

5 13

Fedora 30 workstation keeps crashing...
by linux guy 08 Nov '19

08 Nov '19

My Fedora 30 workstation keeps freezing up. Can't open another session or reboot via the keyboard. Only thing it responds to is a hard reset. I've been using it for 3 years with no issues. Ideas ? How do I troubleshoot it ? LG $ uname -a Linux Brix 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux KDE Plasma Version: 1.15.5 KDE Frameworks Version: 5.59.0 Qt Version: 5.12.5 Hardware i7-5775R with 16 GB of RAM.

5 8

VPN options
by Keith Lofstrom 08 Nov '19

08 Nov '19

I am planning on running a Virtual Private Network from my Fedora firewall out to a UML virtual colo (running RH9) at another site. That site will be the place I present services to the world; httpd, ssh, sftp, smtp. This is to comply with the "no servers" and dynamic ip restrictions on my Comcast connection to the net; if my firewall always drives an outbound connection to the colocation site, I am not worried about changes of ip address, and I am not opening any inbound ports. There are a number of options for the VPN - the most attractive are cipe ( http://sites.inka.de/sites/bigred/devel/cipe.html ) and FreeSwan ( http://www.freeswan.org/ ), though I am told that one can do all this through an ssh tunnel. I would rather have simple and secure than super-duper; I have plenty of bandwidth, and will send outbound http and smtp from the firewall, so the main bandwidth user will be incoming spam/b/b/b/b mail. Anyone have some experiences to share about setting up VPN? Is there anything about either cipe or FreeSwan that is likely to break with FC1 or FC2? Keith -- Keith Lofstrom keithl(a)ieee.org Voice (503)-520-1993 KLIC --- Keith Lofstrom Integrated Circuits --- "Your Ideas in Silicon" Design Contracting in Bipolar and CMOS - Analog, Digital, and Scan ICs

8 8

Named GeoIP just got large
by ToddAndMargo 07 Nov '19

07 Nov '19

Hi All, # ls -al /var/named/chroot/usr/share/GeoIP/GeoLite2-City.mmdb -rw-r--r--. 1 root root 62899374 Oct 8 12:07 /var/named/chroot/usr/share/GeoIP/GeoLite2-City.mmdb Just got ~20 times larger. Can I delete it and start over? Many thanks, -T

7 14

libunique - CORRECTION
by Bob Goodwin 07 Nov '19

07 Nov '19

In an attempt to install a Fedora 30 Notecase Pro rpm in °fedora 31 I find that it requires "libunique-1.0.so" and I was unable to find that with dnf. dnf whatprovides libunique gives no matches found. Where should I look for"libunique-1.0.so" an rpm? Bob -- Bob Goodwin - Zuni, Virginia, USA

1 1

off topic!! -- sysAdmin questions/issues.
by bruce 07 Nov '19

07 Nov '19

Hi. Doing a project that will end in a live web/mobile app with live customers/data/etc. I'm going to need remote sysAdmin functionality to pull this off. I realize I could "stumble" my way through, but given that the project will impact users, I don't want to screw this up. So, I'm looking to get input from the list on what a sysAdmin resource should be able to do for each part of the process. I've posted to fiverr/freelancer but I'm interested in what you guys might say as well. The overall project has 3 components: Development Server: -needs to allow a couple of devs to access server to check in/out code to develop code -manage users, ssh access Test Server: -allow users to upload code to test web apps -test "live" web apps -manage users, ssh access Production Server: -allow users to upload code for live web apps -run "live" web apps -manage users, ssh access -log files -security/etc.. Basically, I'm going to need to figure out what a "sysAdmin" should do or each of the above systems. (and then find someone to help do this in the short term!!) And no, the project can't afford a real sysAdmin -- we're not google!!! Thoughts/Comments would be useful. thanks guys ps, I've got an initial list of things that I started, but thought it would be better to start with a blank slate.

1 0

Re: (fedora) Re: mismatch in hdf packages prevent upgrade from F30->F31
by Jouk Jansen 07 Nov '19

07 Nov '19

Ed Greshko wrote on 7-NOV-2019 12:04:26.12 >On 11/7/19 6:42 PM, Ed Greshko wrote: >> >> On an F31 system and it seems like netcdf is the most logical choice. I removed the netcdf*.i686 packeages and that solved the problem. >> >> On my F31, I get >> >> [egreshko@meimei ~]$ dnf repoquery --whatrequires hdf [snip] >Oh, I did have a F30 VM available so for completeness I get... >[egreshko@f30g ~]$ dnf repoquery --whatrequires hdf >Last metadata expiration check: 0:04:00 ago on Thu 07 Nov 2019 06:48:27 PM CST. >hdf-devel-0:4.2.14-2.fc30.i686 >hdf-devel-0:4.2.14-2.fc30.x86_64 Thanks for finding out. A classical "chicken and egg" problem: You need F31 to find out but only have F30!!! regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

Re: (fedora) Re: mismatch in hdf packages prevent upgrade from F30->F31
by Jouk Jansen 07 Nov '19

07 Nov '19

Ed Greshko 7-NOV-2019 10:53:43.94 >On 11/7/19 5:11 PM, Jouk Jansen wrote: >> When performing an upgrade from F30 to F31 on one of my machines the upgrade >> process tries to install (yes an install not an upgrade) the packages >> hdf.x86-64 and hdf.i686. This fails due to a mismatch in these packages of >> /usr/bin/h4cc and /usr/bin/h4fc. >> >> Does anyone has an idea which other package recently got a dependence on hdf >> and triggers this problem? If I know I may can remove the i686 version from >> my system. >I had no issues to upgrade several systems. >But, what you've said suggests that you may have at least one i686 installed which now needs >hdf when it didn't before. That is also what I think, but which package? >If you do >rpm -qa | grep i686 >does it return anything? yes : I estimate 150-200 packages. No idea which one is the trouble maker. What should I do remove with trial and error? The most likely candidates for me are netcdf-4.4.1.1-12.fc30.i686 and netcdf-cxx-4.2-21.fc30.i686 regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 2

Problem with latest google chrome beta
by Geoffrey Leach 06 Nov '19

06 Nov '19

Google Chrome 79.0.3945.16 beta Fedora 5.2.18-200.fc30.x86_64 % google-chrome [2301:2301:1104/131821.292582:ERROR:sandbox_linux.cc(372)] InitializeSandbox() called with multiple threads in process gpu-process. [2301:2301:1104/131821.982525:ERROR:gl_utils.cc(325)] [.DisplayCompositor] GL_INVALID_OPERATION: Program not linked. [2301:2301:1104/131821.982735:ERROR:gl_utils.cc(325)] [.DisplayCompositor] GL_INVALID_OPERATION: Program object expected. .... Installed 11/01 Any thoughts?

2 7

libunique -
by Bob Goodwin 06 Nov '19

06 Nov '19

. In an attempt to install a Fedora 40 Notecase Pro rpm in °fedora 31 I find that it requires "libunique-1.0.so" and I was unable to find that with dnf. dnf whatprovides libunique gives no matches found. Where should I look for"libunique-1.0.so" an rpm? Bob -- Bob Goodwin - Zuni, Virginia, USA

2 2

Re: (fedora) Re: How to get Klamav working on a fresh installed F31
by Jouk Jansen 06 Nov '19

06 Nov '19

Ed Greshko wrote on 6-NOV-2019 00:23:29.83 >On 11/5/19 9:49 PM, Jouk Jansen wrote: >> Hi All, >> >> On a fresh installed F31 I tried to get Klamav running. However I got the >> the errors listed below. What is wrong in the configuration? Or am I >> packages missing? [snip] >I do not know the answer to your question.�� Other than to say I found that it does run *if* started >from a terminal as "root". >Along those lines, dcopserver seems only able to be started by "root". >Those "clues" may help you track down the issue. You are right. I could start it "as root" from a terminal session. In F30 I did not need to do this. Is this a new "feature" or just a bug? regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

1 0

How to get Klamav working on a fresh installed F31
by Jouk Jansen 05 Nov '19

05 Nov '19

Hi All, On a fresh installed F31 I tried to get Klamav running. However I got the the errors listed below. What is wrong in the configuration? Or am I packages missing? I get: #) klamav ICE Connection rejected! DCOPClient::attachInternal. Attach failed Authentication Rejected, reason : Nond ICE Connection rejected! DCOPClient::attachInternal. Attach failed Authentication Rejected, reason : Nond DCOPServer self-test failed. kdeinit: DCOPServer could not be started, aborting. vleegert-jj ) klamav DCOPClient::attachInternal. Attach failed Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authenti cation failed ICE Connection rejected! DCOPClient::attachInternal. Attach failed Authentication Rejected, reason : None of the authentication protocols specified are supported and host-based authenti cation failed DCOPServer self-test failed. ICE Connection rejected! kdeinit: DCOPServer could not be started, aborting. #) Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

Network bridge help - fedora 31 broke things!
by Tom Horsley 05 Nov '19

05 Nov '19

I have all NetworkManager services masked out. I have network-scripts installed and network enabled. I have these files in /etc/sysconfig/network-scripts: ifcfg-p6p1 looks like: NM_CONTROLLED="no" DHCPV6C="no" DEVICE="p6p1" ONBOOT="yes" PEERDNS="no" HWADDR="00:0B:0E:0F:00:ED" BRIDGE=br0 ifcfg-br0 looks like: NM_CONTROLLED="no" DHCPV6C="no" BOOTPROTO="dhcp" DEVICE="br0" ONBOOT="yes" PEERDNS="no" TYPE=Bridge On fedora 30, br0 automagically shows up with the same MAC as p6p1. On fedora 31, br0 gets the wacky MAC address: 26:b0:0b:12:b4:6c The corporate DHCP service then thinks I have a different hardware and gives me the wrong IP address which doesn't lead to my hostname. Anyone know what is going on?

2 2

Perl 6 can't find subs in modules
by ToddAndMargo 05 Nov '19

05 Nov '19

Hi All, Help! I am so, so screwed if I can't get Perl 6 working again. I just upgraded Fedora from 30 to 31. I upgraded to rakudo-pkg-Fedora31-2019.07.1-03.x86_64.rpm from https://github.com/nxadm/rakudo-pkg/releases Now P6 can not find my subs inside my modules: # cat p6lib/ModuleTest.pm6 sub ModuleTest() is export( :ModuleTest ) { say "Hi"; } sub ModuleTst() is export( :ModuleTst ) { say "Bye"; } # perl6 -I./p6lib -e 'use ModuleTest :ModuleTest :ModuleTst; ModuleTest; ModuleTst;' ===SORRY!=== Error while compiling -e Undeclared name: ModuleTst used at line 1 The stock "rakudo" and "rakudo-zef" that resides in the Fedora repo's has the same issue. And I just reproduced it on a fresh virtual machine of Fedora 31 that had never before been touched by Perl 6 (Rakudo) This problem now occurs across all my programs that call any of my custom modules. This did to happen in Fedora 30. Many thanks, -T

1 1

'updates-testing' failed ??
by ToddAndMargo 04 Nov '19

04 Nov '19

Hi All, Is this me or them? Does "fedora-updates-testing-modular.repo" supersede "fedora-updates-testing.repo"? Many thanks, -T # dnf --enablerepo=* update ... Fedora 31 - x86_64 - Test Updates 7.2 kB/s | 3.4 kB 00:00 Failed to download metadata for repo 'updates-testing' Error: Failed to download metadata for repo 'updates-testing' # ls /etc/yum.repos.d brave-browser-rpm-release.s3.brave.com_x86_64_.repo fedora-cisco-openh264.repo fedora-modular.repo fedora.repo fedora-updates-modular.repo fedora-updates.repo fedora-updates-testing-modular.repo fedora-updates-testing.repo metasploit-framework.repo pgdg-fedora-all.repo rpmfusion-free.repo rpmfusion-free-updates.repo rpmfusion-free-updates-testing.repo rpmfusion-nonfree.repo rpmfusion-nonfree-updates.repo rpmfusion-nonfree-updates-testing.repo

3 6

Re: (fedora) Re: Failed to create a dual boot F31 windows 10 on Dell E5540
by Jouk Jansen 04 Nov '19

04 Nov '19

samuel(a)sieb.net wrote on 31-OCT-2019 22:45:56.20 >On 10/31/19 3:27 AM, Jouk Jansen wrote: >> I tried to make from my Dell lattitude E5540 running windows 10 a dual boot >> with F31. Intallation of F31 runned as expected apart form one point: I made >> a custom partion layout of the free space and it compalined that my BIOS >> needed a small biosboot partition (so I also created that one). >It appears that you booted the USB drive using CSM (legacy) mode instead >of EFI. The biosboot requirement confirms that. >> However after the installation the machine was unbootable. I had to chande >> the boot mode in the bios form UEFI to legacy to get F31 booted. Windows 10 >> appeared not bootable anymore. >> >> What did I miss? How should I proceed to get a dual boot machine? >You will need to reinstall again, but make sure you boot in EFI mode. >You should be able to set your BIOS to only boot in EFI with no CSM >available if necessary. You can remove that biosboot partition during >the install as well. Thanks that helped. CSM was called a little different in the BIOS but switching off all "legacy" capabilities did the trick. Still wondereing why Fedora installs in legacy mode while the DVD is booted in EFI mode and a windown EFI boot manager is present, resulting in wiping out the windows bootmanager. Regards Jouk Pax, vel iniusta, utilior est quam iustissimum bellum. (free after Marcus Tullius Cicero (106 b.Chr.-46 b.Chr.) Epistularum ad Atticum 7.1.4.3) Touch not the cat bot a glove >------------------------------------------------------------------------------< Jouk Jansen joukj(a)hrem.nano.tudelft.nl Technische Universiteit Delft tttttttttt uu uu ddddddd Kavli Institute of Nanoscience tttttttttt uu uu dd dd Nationaal centrum voor HREM tt uu uu dd dd Lorentzweg 1 tt uu uu dd dd 2628 CJ Delft tt uu uu dd dd Nederland tt uu uu dd dd tel. 31-15-2782272 tt uuuuuuu ddddddd >------------------------------------------------------------------------------<

2 1

dhcp failover with selinux enabled
by Sam Varshavchik 03 Nov '19

03 Nov '19

Does anyone happen to know if the dhcp failover configuration that's documented here: https://kb.isc.org/docs/aa-00502 is supported by Fedora's selinux policy. Perusing it, failover seems to use a dedicated port(s), so selinux needs to bless dhcp's binding to that port(s). I couldn't figure out what is or isn't in Fedora's selinux polixy by searching what's in the selinux-policy-targeted and selinux-policy-devel rpms; and I was unable to find any useful selinux documentation, either in the supplied rpm or web searches. It would be nice to know this in advance before attempting to wreck my LAN for an afternoon, trying to get this to work with selinux enabled. I thought I could determine whether Fedora's selinux with respect to dhcp and ports 647 and 7911 (the dhcpd.conf man pages makes it clear that ports 519 and 520 from the above docs are outdated) by figuring out where is the selinux policy restricts privoxy to port 8118; but a grep of all the files in selinux-policy-targeted or selinux-policy-devel finds nothing that appears to specify that the privoxy_t domain is allowed to bind port 8118. The selinux-doc RPM appears to be just robo-generated documentation that just repeats the stuff that I found in the other RPMs.

3 2

upgrade does not take
by ToddAndMargo 03 Nov '19

03 Nov '19

Hi All, After initiating "dnf system-upgrade reboot", my system reboots, prompts me for my LUKS password, then pops up "Upgrading you system 0%". Seconds later it reboot and I am back in Fedora 30. I have completely removed qemu everything and virt everything. Any words of wisdom? Many thanks, -T This is what I have been following FC 30 -->> FC 31: https://docs.fedoraproject.org/en-US/quick-docs/dnf-system-upgrade/ # rpm --rebuilddb # rpm -Va --nofiles --nodigest if anything is too new, do a # dnf downgrade offender(s) # dnf --enablerepo=* update --refresh # dnf install python3-dnf-plugin-system-upgrade # dnf system-upgrade download --refresh --releasever=31 --allowerasing --best # rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-31-primary # dnf clean packages <-- optional # dnf system-upgrade reboot

3 9

F30->F31 systemd-networkd no IPv6 autoconfiguration
by Anthony Joseph Messina 03 Nov '19

03 Nov '19

After a successful "dnf systemd upgrade" F30->F31, I'm finding that a few of my machines which use systemd-networkd instead of NetworkManager are no longer autoconfiguring IPv6 addresses. I also noticed that even though NetworkManager is disabled, it is initiated in early boot, which I'm not sure is related. It appears as though the system isn't assigning the link-local address and therefore can't communicate via IPv6. If anyone has any pointers on where to begin, I'd appreciate it. Thanks. -A Both systems below use the following /etc/systemd/network/10-wired-dhcp.network: [Match] Name=en* [Network] DHCP=yes IPv6PrivacyExtensions=yes A system that IS working with systemd-networkd displays the following debug output: eno1: New device has no master, continuing without eno1: Flags change: +UP +LOWER_UP +RUNNING +MULTICAST +BROADCAST eno1: Link 2 added eno1: udev initialized link eno1: State changed: pending -> initialized eno1: Saved original MTU: 1500 eno1: Remembering foreign address: fe80::f64d:30ff:fe6e:2cf5/64 (valid forever) eno1: Gained IPv6LL eno1: Remembering route: dst: ff00::/8, src: n/a, gw: n/a, prefsrc: n/a, scope: global, table: local, proto: boot, type: unicast eno1: Remembering route: dst: fe80::f64d:30ff:fe6e:2cf5/128, src: n/a, gw: n/a, prefsrc: n/a, scope: global, table: local, proto: kernel, type: local eno1: Remembering route: dst: fe80::/64, src: n/a, gw: n/a, prefsrc: n/a, scope: global, table: main, proto: kernel, type: unicast eno1: Remembering updated address: fe80::f64d:30ff:fe6e:2cf5/64 (valid forever) eno1: Updating remembered route: dst: fe80::f64d:30ff:fe6e:2cf5/128, src: n/a, gw: n/a, prefsrc: n/a, scope: global, table: local, proto: kernel, type: local eno1: Link state is up-to-date eno1: found matching network '/etc/systemd/network/10-wired-dhcp.network' Setting '/proc/sys/net/ipv6/conf/eno1/disable_ipv6' to '0' eno1: IPv6 successfully enabled Setting '/proc/sys/net/ipv6/conf/eno1/proxy_ndp' to '0' Setting '/proc/sys/net/ipv6/conf/eno1/use_tempaddr' to '2' Setting '/proc/sys/net/ipv6/conf/eno1/accept_ra' to '0' eno1: Started LLDP. eno1: Setting address genmode for link eno1: Acquiring DHCPv4 lease eno1: Discovering IPv6 routers eno1: State changed: initialized -> configuring eno1: Acquiring DHCPv6 lease on NDisc request Another system that is not working displays the following debug output (note the missing Remembering foreign address and Gained IPv6LL lines): eno1: New device has no master, continuing without eno1: Flags change: +UP +LOWER_UP +RUNNING +MULTICAST +BROADCAST eno1: Link 2 added eno1: udev initialized link eno1: State changed: pending -> initialized eno1: Saved original MTU: 1500 eno1: Remembering route: dst: ff00::/8, src: n/a, gw: n/a, prefsrc: n/a, scope: global, table: local, proto: boot, type: unicast eno1: Link state is up-to-date eno1: found matching network '/etc/systemd/network/10-wired-dhcp.network' eno1: IPv6 successfully enabled eno1: Started LLDP. eno1: Setting address genmode for link eno1: Acquiring DHCPv4 lease eno1: State changed: initialized -> configuring -- Anthony - https://messinet.com F9B6 560E 68EA 037D 8C3D D1C9 FF31 3BDB D9D8 99B6

1 0

xdg-desktop-portal?
by Tom Horsley 03 Nov '19

03 Nov '19

After running fedora 31 for a day or so, I now have thousands of lines of this in my messages log: Nov 3 12:43:21 zooty xdg-desktop-por[33248]: Failed to get application states: GDBus.Error:org.freedesktop.portal.Error.Failed: Could not get window list: Cannot invoke method; proxy is for the well-known name org.gnome.Shell without an owner, and proxy was constructed with the G_DBUS_PROXY_FLAGS_DO_NOT_AUTO_START flag How do I make xdg-desktop-portal go away and stop bothering me? (I'm not running gnome shell, I'm running a custom fvwm session, but systemd starts this junk anyway in my user deamon).

2 2

Root Forced to Comply With Password Complexity Requirements
by Garry Williams 03 Nov '19

03 Nov '19

When did this start? garry@ifr$ sudo passwd ppatel Changing password for user ppatel. New password: BAD PASSWORD: The password is shorter than 8 characters New password: BAD PASSWORD: The password is shorter than 8 characters New password: BAD PASSWORD: The password fails the dictionary check - it is based on a dic tionary word passwd: Have exhausted maximum number of retries for service garry@ifr$ The root user cannot set whatever password he wants on his machine? Since when? I wanted to assign a temporary password for a new user and then do sudo passwd -e ppatel to force it to be changed. For the new user, enforcing password complexity is, I guess, OK. But for root? And why bail after three tries to get a compliant password? That seems capricious (not to mention irritating) to me. How do I revert this unwelcome change? System log shows up errors, too: Oct 31 16:59:26 ifr sudo[130692]: pam_unix(sudo:session): session opened for user root by garry(uid=0) Oct 31 16:59:26 ifr passwd[130694]: pam_pwquality(passwd:chauthtok): pam_par se: unknown or broken option; local_users_only Oct 31 16:59:26 ifr passwd[130694]: pam_pwquality(passwd:chauthtok): pam_par se: unknown or broken option; retry=3 Oct 31 16:59:26 ifr passwd[130694]: pam_pwquality(passwd:chauthtok): pam_par se: unknown or broken option; local_users_only Oct 31 16:59:26 ifr passwd[130694]: pam_pwquality(passwd:chauthtok): pam_par se: unknown or broken option; retry=3 Oct 31 16:59:57 ifr passwd[130694]: gkr-pam: couldn't update the login keyri ng password: no old password was entered Oct 31 16:59:59 ifr sudo[130692]: pam_unix(sudo:session): session closed for user root -- Garry Williams

8 12

trouble with Fedora 31, notebook, and nvidia
by D. Hugh Redelmeier 03 Nov '19

03 Nov '19

I bought a used notebook which came with an Nvidia GPU and I haven't managed to get it to work with Fedora. Computer: Dell XPS 15 9580. UltraHD screen. Nvidia GFX 1050 mobile GPU. 1) Fedora 30 installation medium hung. 2) tried Fedora 31 beta. Hung the same way. 3) it seems that nouveau is to blame. Solution: add kernel parameter nouveau.kms=0. 4) installed Fedora 31 beta. (I've kept it updated, so it is now Fedora 31 non-beta) Problems: a) I don't get the advantage of the fast GPU (and the chance of using it for GPU computing). This isn't an urgent concern. b) the GPU is apparently powered up and generating heat. This runs down my battery and causes the fan to run. Solution?: i) Install proprietary nvidia driver. I used the negativo17 repositories. ii) Install BumbleBee to allow switching between the Intel IGPU and the Nvidia GPU. (I don't think that I've actually used BumbleBee yet.) Problem: System hangs on boot when the kernel has nvidia modules (which I've only done for some kernels, thank goodness). If I disable Wayland (in /etc/gdm/custom.conf set WaylandEnable to false), I can boot a kernel with nvidia modules. GDM (the loging screen) works. It is known that the Nvidia proprietary drives don't work with Wayland. If the kernel has nvidia modules, once I log in through GDM, the machine locks up hard. In particular, I've done this while an SSH session is also logged in from another machine. That session is frozen too. I *think* that the /etc/gdm/custom.conf setting should also prevent Wayland from being used during the session post-GDM but I don't really have a way of checking. ==> Is wayland disabled for the session or do I need other magic? The latest system log entries are lost since the machine freezes without flushing various filesystem caches. Any suggestions?

2 2

Fedora 30 Copy/Paste Not Working
by das 03 Nov '19

03 Nov '19

Hello Dear Friends Copying something from a browser window (Firefox) and pasting it on a terminal (Xfce, Gnome, Mate) was not working . Then I discovered copy/paste is not working anywhere, Gedit, Libreoffice and such. Then I searched the Net and got this link: http://irawoodring.net/fedora-xfce4-and-clipit-wayland/ After that I made an 'Exit' from the running instance of Clippit and now copy/paste works. Later I will do the 'dnf remove clippit' and 'shutdown -r now'. Thought it may help someone else like me. -- দাশ das http://ddts.randomink.org/

1 0

qemu upgrade to fc31 problem
by ToddAndMargo 02 Nov '19

02 Nov '19

Hi All, Fedora 30, attempting to upgrade to Fedora 31 # dnf system-upgrade download --refresh --releasever=31 --allowerasing --best Error: Problem: cannot install the best update candidate for package qemu-system-x86-core-2:4.1.0-4.fc30.x86_64 - problem with installed package qemu-system-x86-core-2:4.1.0-4.fc30.x86_64 - package qemu-system-x86-core-2:4.1.0-5.fc31.x86_64 requires libvirglrenderer.so.0()(64bit), but none of the providers can be installed - package qemu-system-x86-core-2:4.1.0-2.fc31.x86_64 requires libvirglrenderer.so.0()(64bit), but none of the providers can be installed - cannot install the best update candidate for package virglrenderer-0.8.0-1.20191002git4ac3a04c.fc30.x86_64 - cannot install both virglrenderer-0.7.0-4.20190424gitd1758cc09.fc31.x86_64 and virglrenderer-0.8.0-1.20191002git4ac3a04c.fc31.x86_64 - qemu-system-x86-core-2:4.1.0-4.fc30.x86_64 does not belong to a distupgrade repository (try to add '--skip-broken' to skip uninstallable packages) "--skip-broken" gives the same error. So does adding "--enablerepo=*" Any words of wisdom? Many thanks, -T

2 4

I say thanks for F31
by sixpack13 02 Nov '19

02 Nov '19

thanks for a new release of Fedora to all involved people that make this happen [1] to me F31 had been working since first beta without any error's, etc.. very nice !!! [1] maybe it comes somewhat late, but...

1 0

Fedora31 install problem -
by Bob Goodwin 02 Nov '19

02 Nov '19

. I have been trying to install Fedora 31XFCE Spin. I've spent more time at it than I care to admitbut can"t get the Anaconda installer to see a clear one terabyte drive. I re-partitioned it with Gparted and gave it an ext4 file system. The problem seems to be that I don't want LVM, choosing Standard Partition instead. It seems to want to reformat and install ext4 again? That's ok but it never happens ... It just keeps showing 0B used and 0B of free space? Does anyone know what I may be doing wrong? Is there a command line method to do the install instead of the GUI? Bob -- Bob Goodwin - Zuni, Virginia, USA

6 9

too-nearly-full filesystem '/'. (was upgrade problem: space on '/' filesystem.)
by home user 01 Nov '19

01 Nov '19

(Fedora-30; x86-64; personal workstation) This problem goes back to last Thursday, so a brief review might be good. brief background ================ Last Thursday, I tried to upgrade from Fedora-29 to Fedora-30. dnf complained it didn't have enough space in the '/' filesystem. List members successfully got me through the upgrade. But the root problem(s) probably still remains. some data (all commands run this (Tuesday) afternoon, Oct. 15) ========= -bash.11[~]: df -hP Filesystem Size Used Avail Use% Mounted on devtmpfs 7.8G 0 7.8G 0% /dev tmpfs 7.9G 76M 7.8G 1% /dev/shm tmpfs 7.9G 1.7M 7.9G 1% /run tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup /dev/sda6 50G 41G 6.0G 88% / tmpfs 7.9G 68K 7.9G 1% /tmp /dev/sda3 477M 236M 213M 53% /boot /dev/sda7 904G 7.7G 851G 1% /home tmpfs 1.6G 84K 1.6G 1% /run/user/1001 -bash.12[~]: -bash.13[/]: du -sh | grep G du: cannot access './run/user/1001/gvfs': Permission denied du: cannot access './proc/1776/task/1776/fd/4': No such file or directory du: cannot access './proc/1776/task/1776/fdinfo/4': No such file or directory du: cannot access './proc/1776/fd/3': No such file or directory du: cannot access './proc/1776/fdinfo/3': No such file or directory 49G . -bash.14[/]: -bash.14[/]: du -hx -d1 / 23G /var 4.0K /system-upgrade-root 4.0K /srv 17G /usr 16K /lost+found 51M /etc 4.0K /sysroot 4.0K /mnt 1.4G /root 4.0K /media 238M /opt 4.0K /.cache 41G / -bash.15[/]: starting questions ================== 1. What else do you want to know to effectively help? 2. A good specific first step? Please: one step at a time! thanks, Bill.

11 91