Apache and umask for document root
by Alex
Hi,
I've set up a virtual host for a joomla website and having some
permissions problems. I've seen numerous configurations online about
how to set umask for the apache user, but none have worked, including
creating a systemd file
(/etc/systemd/system/multi-user.target.wants/httpd.service) with the
following:
[Unit]
Description=The Apache HTTP Server
After=network.target remote-fs.target nss-lookup.target
[Service]
Type=notify
Environment=LANG=C
Umask=0006
ExecStart=/usr/sbin/httpd $OPTIONS -DFOREGROUND
ExecReload=/usr/sbin/httpd $OPTIONS -k graceful
# Send SIGWINCH for graceful stop
KillSignal=SIGWINCH
KillMode=mixed
PrivateTmp=true
[Install]
WantedBy=multi-user.target
The problem is that the files are owned by the joomla user, but also
need to have access (both read and write) to be able to modify some
files within the document root.
Does anyone have any suggestions on how to set umask for the apache user?
I'm also interested in recommended permissions settings for the joomla
document root.
Thanks,
Alex
7 months, 3 weeks
SATA optical drives
by David Fletcher
I'm currently running FC5, will probably upgrade to F7 in a couple of months.
Unfortunately my CD/DVD rewriter appears to have died, before it's
even seen a dual layer disk :'(
SATA hard drives run without problems for me, but now that SATA
optical drives are starting to appear in the shops, would it be OK to
buy one of these and get rid of another wide ribbon cable?
Is anybody already running them with Fedora?
Thanks for any advice/experiences.
Dave F
8 months, 1 week
[FC8] ssh and CAC card???
by Todd Denniston
From what I understood, the change to openssh listed in:
rpm -q --changelog openssh |less
as:
"* Wed Jun 20 2007 Tomas Mraz <tmraz(a)redhat.com> - 4.5p1-7
- experimental NSS keys support
- correctly setup context when empty level requested (#234951)
"
was supposed to allow the Common Access Card (CAC) to work with the shipped
Fedora 8 ssh.
As per NSS usual, everything is undocumented, i.e., `ssh-add --help` does not
help at all, and `man ssh-add` points to `ssh-add -s reader`
# ssh-add -s 0
Enter passphrase for smartcard:
SSH_AGENT_FAILURE
Could not add card: 0
# ssh-add -s 1
Enter passphrase for smartcard:
SSH_AGENT_FAILURE
Could not add card: 1
So does anyone know how to use the possible functionality, or are we reduced
to reading the source?
--
Todd Denniston
Crane Division, Naval Surface Warfare Center (NSWC Crane)
Harnessing the Power of Technology for the Warfighter
8 months, 2 weeks
Changing date with procmail
by Michael A. Peters
Anyone know of a procmail recipe to change the date on incoming
messages?
If the date is in the future by more than 24 hours - I'd like to just
change it to the current date.
If the date is in the past by more than two weeks - I'd like to just
change it to the current date.
I'd like to do it in procmail - if someone knows how.
I've done some searching, still have some to do.
Found some stuff on extracting the date, but not on modifying it if
necessary.
9 months, 2 weeks
HP laptop and wifi on Fedora 35 fix wifi adapter.
by Cătălin George Feștilă
After the upgrade with F35, I got some errors on wifi.
Now I saw the adapter is not shown but is listed on hardware.
If I press the wifi button then start the airplane mode and is set to on.
How can be fixed?
[mythcat@fedora ~]$ lshw -C network -short
WARNING: you should run this program as super-user.
H/W path Device Class Description
==============================================
/0/100/1c.1/0 network BCM4311 802.11b/g WLAN
/0/100/1c.2/0 ens1 network NetLink BCM5787M Gigabit Ethernet PCI Express
WARNING: output may be incomplete or inaccurate, you should run this program as super-user.
[mythcat@fedora ~]$ lspci
...
10:00.0 Network controller: Broadcom Inc. and subsidiaries BCM4311 802.11b/g WLAN (rev 01)
18:00.0 Ethernet controller: Broadcom Inc. and subsidiaries NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
11 months, 1 week
F33 just pretends to print
by Michael Hennebry
I have a Brother HL-L2360DL that I'd thought I'd finally managed to install.
I had to go to the Brother website to get a script to run.
The instructions for the script had the wrong name for it.
None of the default options for Brother printers came close.
The CUPS adminstration "web" pages say the right things:
Idle, accepting jobs, two completed jobs.
Nothing actually prints. Not even a test page.
The printer never comes out of deep sleep.
How do I fix this?
It worked with Centos 7, but I do not know what I did.
In my experience, there is no such thing as a small problem when it comes to
installing a printer on Linux:
Either it just works or it requires a mighty effort.
I am getting mighty tired of mighty efforts.
BTW how do I change the default from single- to double-sided?
--
Michael hennebry(a)web.cs.ndsu.NoDak.edu
"Sorry but your password must contain an uppercase letter, a number,
a haiku, a gang sign, a heiroglyph, and the blood of a virgin."
-- someeecards
11 months, 2 weeks
cisco ise
by david richyad
cisco ise helps safeguard your business. It lets you control access throughout your network, see the user and device details, and stop/contain any threats. You can also use it to enforce security policies throughout your network. As a result, it helps prevent any technical issues and strengthens your cybersecurity measures. In short, you can manage your network security with more ease. Everything can be handled in one place, as opposed to needing multiple different applications open at once.
https://www.fieldengineer.com/blogs/cisco-ise-deployment-guide
1 year, 1 month
LibreOffice Calc chart printout missing axes and gridlines.
by home user
Good morning,
I'm not sure if the problem is in LibreOffice or something else. Also,
I did try to post this in LibreOffice support, but my login does not
work, and trying to create a new account does not work.
(Fedora-34, Gnome, LibreOffice 7.1.8.1, HP LaserJet Pro MFP M180nw)
I have a LibreOffice Calc spreadsheet. It has a chart. On my
workstation monitor, the chart looks as I desire: border, x and y axes,
legend, axis labels, data curves, tick marks along the axes, and a grid
in the plot area. When I print the chart to a PDF file and then display
the PDF file, it look the same as in LibreOffice Calc. But, when in
LibreOffice Calc, I print to the printer, there are no axes and no grid
lines. How do I get the axes and grid lines to show?
Thank-you in advance.
Bill.
1 year, 1 month
Improper shutdown, now Kernel panic.
by murph nj
Hi all:
I've got an odd problem that I was hoping for some help on.
The laptop was previously working fine, I am running F30, updated regularly.
I've got an Acer laptop that has been shutting down suddenly. (I
suspect a bad battery, working on that.)
After a sudden shutdown last night, I now get a kernel panic on boot
right after "Starting Switch Root..."
I was able to boot from a USB stick, and was able to read the journal,
but I didn't see anything obvious to help.
I was able to get all of my data off of the (encrypted) disks, so
that's not a problem, but I don't want to just give up, and wash and
reload too quickly.
Any suggestions?
Thanks,
--murph
1 year, 2 months
