power profiles
by Frederic Muller
Hi!
It seems i can only stay in Power Saver mode, balanced seems to be
clickable but quickly reverts to Power Saver and Performance is not even
clickable.
Any idea if there is any way to do that 'manually' as my laptop is
really slow now.
Thank you.
Fred
1 year, 2 months
Vivaldi web browser - anybody?
by lejeczek
Hi guys.
Does anybody use Vivaldi?
I've had for a few years but have used it only for specific
subset of wwws. I've only recently noticed I do not get
sound during video playback, Youtube and others.
Can somebody confirm, using their yum/rpm packaged installation?
many thanks, L.
1 year, 2 months
Fedora 37: kernel: general protection fault, probably for
non-canonical address PREEMPT SMP PT
by Dario Lesca
On a Fedora 37 up to date (kernel 6.0.10-300.fc37.x86_64), sometime I
get this error[1]
This problem occur often when I use nfs server from another PC, and if
I try to restart nfs via systemctl the command it remains stuck and I
must power off the PC
Other times PC freezes and I must power off and restart it.
Could it be a hardware problem (RAM? or CPU?) or I must fill a kernel
or nfs bug?
Many thanks for your help.
Dario
[1] (https://paste.centos.org/view/c6f9c704)
dic 01 21:12:46 kernel: general protection fault, probably for non-
canonical address 0x17ffffc0000008: 0000 [#1] PREEMPT SMP PTI
dic 01 21:12:46 kernel: CPU: 5 PID: 2103 Comm: nfsd Not tainted 6.0.10-
300.fc37.x86_64 #1
dic 01 21:12:46 kernel: Hardware name: LENOVO 30BGS1BV00/103D, BIOS
S06KT40A 03/15/2019
dic 01 21:12:46 kernel: RIP: 0010:release_pages+0x46/0x590
dic 01 21:12:46 kernel: Code: 48 8d 44 24 28 48 89 44 24 28 48 89 44 24
30 85 f6 0f 8e a2 00 00 00 48 63 f6 31 db 49 89 fc 45 31 ed 48 8d 2c f7
4d 8b 3c 24 <49> 8b 47 08 a8 01 0f 85 a9 01 00 00 0f 1f 44 00 00 4d 85
ed 74 0c
dic 01 21:12:46 kernel: RSP: 0018:ffffa9a901697e40 EFLAGS: 00010206
dic 01 21:12:46 kernel: RAX: 00000000ffff8c03 RBX: 0000000000000000
RCX: 0000000000000000
dic 01 21:12:46 kernel: RDX: fffffc6305e4dd48 RSI: ffffa9a901697e68
RDI: fffffc6304df1f48
dic 01 21:12:46 kernel: RBP: ffff8c03dea64b78 R08: fffffc6305e4dd48
R09: 0000000000000000
dic 01 21:12:46 kernel: R10: 0000000000000000 R11: fffffc63043ec208
R12: ffff8c03dea64b28
dic 01 21:12:46 kernel: R13: 0000000000000000 R14: fffffc6304df1f48
R15: 0017ffffc0000000
dic 01 21:12:46 kernel: FS: 0000000000000000(0000)
GS:ffff8c0b0dd40000(0000) knlGS:0000000000000000
dic 01 21:12:46 kernel: CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
dic 01 21:12:46 kernel: CR2: 00007f42a3ffefff CR3: 000000035d010005
CR4: 00000000003726e0
dic 01 21:12:46 kernel: DR0: 0000000000000000 DR1: 0000000000000000
DR2: 0000000000000000
dic 01 21:12:46 kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0
DR7: 0000000000000400
dic 01 21:12:46 kernel: Call Trace:
dic 01 21:12:46 kernel: <TASK>
dic 01 21:12:46 kernel: ? nfsd_shutdown_threads+0x90/0x90 [nfsd]
dic 01 21:12:46 kernel: __pagevec_release+0x1b/0x30
dic 01 21:12:46 kernel: svc_xprt_release+0x1a1/0x200 [sunrpc]
dic 01 21:12:46 kernel: svc_send+0x59/0x160 [sunrpc]
dic 01 21:12:46 kernel: nfsd+0xd5/0x190 [nfsd]
dic 01 21:12:46 kernel: kthread+0xe6/0x110
dic 01 21:12:46 kernel: ? kthread_complete_and_exit+0x20/0x20
dic 01 21:12:46 kernel: ret_from_fork+0x1f/0x30
dic 01 21:12:46 kernel: </TASK>
dic 01 21:12:46 kernel: Modules linked in: tls snd_seq_dummy
snd_hrtimer vhost_net vhost vhost_iotlb tap xt_recent xt_conntrack
xt_hashlimit xt_addrtype xt_mark xt_TCPMSS nft_chain_nat xt_MASQUERADE
xt_REDIRECT xt_multiport xt_nat xt_CT xt_NFLOG nfnetlink_log xt_LOG
nf_log_syslog nf_nat_tftp nf_nat_snmp_basic nf_conntrack_snmp
nf_nat_sip nf_nat_pptp nf_nat_irc rpcrdma nf_nat_h323 nf_nat_ftp
nf_nat_amanda ts_kmp rdma_cm nf_conntrack_amanda nf_nat iw_cm
nf_conntrack_sane ib_cm nf_conntrack_tftp nf_conntrack_sip ib_core
nf_conntrack_pptp nf_conntrack_netlink nf_conntrack_netbios_ns
nf_conntrack_broadcast nf_conntrack_irc nf_conntrack_h323
nf_conntrack_ftp nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tun pppoe
pppox ppp_generic slhc ipt_REJECT nf_reject_ipv4 nft_compat nf_tables
nfnetlink bridge stp llc qrtr snd_hda_codec_hdmi snd_hda_codec_realtek
intel_rapl_msr intel_rapl_common snd_hda_codec_generic iwlmvm
ledtrig_audio intel_tcc_cooling x86_pkg_temp_thermal intel_powerclamp
snd_hda_intel coretemp
dic 01 21:12:46 kernel: snd_intel_dspcfg kvm_intel snd_intel_sdw_acpi
mac80211 snd_hda_codec kvm libarc4 iTCO_wdt ee1004 mei_wdt
intel_pmc_bxt mei_hdcp iTCO_vendor_support mei_pxp snd_hda_core iwlwifi
snd_hwdep irqbypass snd_seq snd_seq_device rapl intel_cstate snd_pcm
cfg80211 snd_timer mei_me snd think_lmi intel_uncore i2c_i801
intel_wmi_thunderbolt firmware_attributes_class wmi_bmof soundcore
pcspkr rfkill i2c_smbus mei joydev intel_pch_thermal acpi_pad nfsd
auth_rpcgss nfs_acl lockd grace sunrpc zram xfs i915 crct10dif_pclmul
crc32_pclmul crc32c_intel polyval_clmulni polyval_generic raid1
ghash_clmulni_intel e1000e r8169 drm_buddy drm_display_helper cec ttm
wmi video uas usb_storage scsi_dh_rdac scsi_dh_emc scsi_dh_alua
ip6_tables ip_tables dm_multipath fuse
dic 01 21:12:46 kernel: ---[ end trace 0000000000000000 ]---
--
Dario Lesca
(inviato dal mio Linux Fedora 37 Workstation)
1 year, 2 months
lxd on Fedora for virtual machine
by Robert McBroom
I see discussions of container tech with lxd and docker on ubuntu. dnf
will install docker. Anyone have experience with a windows virtual
machine with these systems?
1 year, 2 months
vim question - how to stop auto comments
by Sbob
Hi all;
Anyone know how to disable the vim feature where it auto comments all
lines after a comment, meaning if I add a comment line and then hit
enter for a new line I do not want the new line to automatically hace a
comment (#) char... it's driving me nuts!
Thanks in advance
1 year, 2 months
Nvidia in F37
by GianPiero Puccioni
Hi,
I just update from F35 to F37 and everything is fine except I noticed that
instead of the Nvidia from RPMFusion it is using nouveau.
In fact the nvidia module is missing and wasn't built by akmod.
I think the problem is that it started with kernel 6.1.7 which is very recent
but it seems it's missing the kernel-headers -the most recent in the
repositories is 6.1.5- and akmod needs that.
There is something strange going on or I just should wait for the headers to
appear? Or maybe install 6.1.5 and use that?
G
1 year, 2 months
Massive WireGuard performance regression on Fedora 37 vs Ubuntu 18.04
by James Wynn
I noticed a massive performance regression for WireGuard in Ubuntu 20.04 & 22.04, but it also affects Fedora. I don't know since which version.
Should I report this as a bug or did I mess something up?
I have fully reproducible steps to demonstrate this issue on a vanilla DigitalOcean droplet, minimal WireGuard configuration and no firewall rules. I've also seen this issue on other hosting providers.
Testing with `iperf3 -c XXX -P 5`:
- Unencrypted traffic on DigitalOcean's VPC = ~2Gbps
- WireGuard Ubuntu 18.04 = ~1.3Gbps
- WireGuard Fedora 37 = ~400Mbps
htop reported only 20-30% load on the vCPU core so it isn't CPU-bound. After doing these tests, I did them all again on a different day to rule out temporary network congestion.
Steps to reproduce below. Repeat with each OS version.
0. Create a DigitalOcean account.
1. Create two $6 droplets (eg, LON1 region) with Regular CPU & 1GB RAM each, called test01 & test02.
2. `dnf update -y && reboot`
3. `dnf install -y wireguard-tools iperf3`
4. On test01, create `/etc/wireguard/test.conf` with these contents. Replace `YYY` with the IP address of the eth1 interface (VPC) on test02.
--------------------
[Interface]
PrivateKey = wOEa8/RS2v065wgYGQn5k7FqOXuZJ9aC/6NDW569c3g=
Address = 192.168.200.10/24
ListenPort = 51820
SaveConfig = false
[Peer]
PublicKey = wdXOzBptLD/QMZjhG475GErrz95Vpj4S7JPEwzcDMV8=
PresharedKey = j5Oeyhu/qDag2LunpVlFqKycp/9CH+Izjza5aq2cYss=
Endpoint = YYY:51820
AllowedIPs = 192.168.200.20/32
--------------------
5. On test02, create `/etc/wireguard/test.conf` with these contents. Replace `XXX` with the IP address of the eth1 interface (VPC) on test01.
--------------------
[Interface]
PrivateKey = kCJ/4rVDTy86HxP9N5wUmgMF1Esqjc051jQPGhrQIGw=
Address = 192.168.200.20/24
ListenPort = 51820
SaveConfig = false
[Peer]
PublicKey = s/GtXkHOtPsqcNDy0BSRoMuxXYb4hK18dsQdkZk20yQ=
PresharedKey = j5Oeyhu/qDag2LunpVlFqKycp/9CH+Izjza5aq2cYss=
Endpoint = XXX:51820
AllowedIPs = 192.168.200.10/32
--------------------
6. On both droplets, run `systemctl start wg-quick@test`
7. On test01, run `iperf3 -s -B XXX`.
8. On test02, run `iperf3 -c XXX -P 5 -t 30` and observe ~2Gbps.
9. On test01, run `iperf3 -s -B 192.168.200.10`
10. On test02, run `iperf3 -c 192.168.200.10 -P 5 -t 30` and observe ~400Mbps.
In steps 7 and 8, replace XXX with the IP address of the eth1 interface on test01.
1 year, 2 months
Change in behavior of libvirt networking
by Jeff Sadowski
I have a freepbx vm. A month ago it was working perfectly.
Then either a patch or me playing with docker broke something. ( I had
updated my system before starting to play with Docker
So the logs after the break show as follows
15018 [2023-01-25 18:53:59] NOTICE[32354] res_pjsip/pjsip_distributor.c:
Request 'INVITE' from '"My Name " <sip:+(My Phone Number)@(freepbxvm ip)>'
failed for '(host ip):26346' (callid: e87aca96e0e926db@(obi200 local sip
provider ip)) - No matching endpoint found
15019 [2023-01-25 18:53:59] NOTICE[32354] res_pjsip/pjsip_distributor.c:
Request 'INVITE' from '"My Name " <sip:+(My Phone Number)@(freepbxvm ip)>'
failed for '(host ip):26346' (callid: e87aca96e0e926db@(obi200 local sip
provider ip)) - No matching endpoint found
15020 [2023-01-25 18:53:59] NOTICE[32354] res_pjsip/pjsip_distributor.c:
Request 'INVITE' from '"My Name " <sip:+(My Phone Number)@(freepbxvm ip)>'
failed for '(host ip):26346' (callid: e87aca96e0e926db@(obi200 local sip
provider ip)) - Failed to authenticate
15021 [2023-01-25 18:53:59] NOTICE[32354] res_pjsip/pjsip_distributor.c:
Request 'INVITE' from '"My Name " <sip:+(My Phone Number)@(freepbxvm ip)>'
failed for '(host ip):26346' (callid: e87aca96e0e926db@(obi200 local sip
provider ip)) - No matching endpoint found
15022 [2023-01-25 18:53:59] NOTICE[32354] res_pjsip/pjsip_distributor.c:
Request 'INVITE' from '"My Name " <sip:+(My Phone Number)@(freepbxvm ip)>'
failed for '(host ip):26346' (callid: e87aca96e0e926db@(obi200 local sip
provider ip)) - Failed to authenticate
Since I had started playing with docker and created an ipvlan. I tried
removing the ipvlan but the behavior is the same. I do not expect the (host
ip) to be in the logs at all since it is not sending that traffic. I can
ping the ip of the (obi200) with no issues. That is the device ip I expect
instead of the (host ip).
A long time ago when I started using libvirt
I had turned off Network manager on my machine and am using systemd to set
up my network.
In /etc/systemd/network/
I have 3 files 1-br0-bind.network, 2-br0-static.network and vr.netdev
# cat /etc/systemd/network/1-br0-bind.network
[Match]
Name=enp34s0
[Network]
Bridge=br0
# cat /etc/systemd/network/2-br0-static.network
[Match]
Name=br0
[Network]
Address=192.168.0.7/24
Gateway=192.168.0.1
[Resolve]
DNS=192.168.0.7 8.8.8.8
Domains=my.domain
# cat vr.netdev
[NetDev]
Name=br0
Kind=bridge
MACAddress=aa:bb:cc:dd:ee:ff
enp34s0 is my onboard ethernet
All my vm's used bridge type and connected to br0
Freepbx seems to be a little more picky.
For now a solution that worked for me was to use a second ethernet card for
my freepbx vm to use. Instead of bridge mode I selected direct attach. But
I would like to solve what happened so I can move it back to my bridge
interface I had set up for my vm's.
1 year, 2 months
OT: xplanet cloudmaps
by Ranjan Maitra
Hi,
For several years, until pre-pandemic times, I used to download cloudmaps and overlay them on my xplanet. It was kind of cool, and also I could see some of the heavier weather tracking around the world. Then, I believe that that source got hacked and I never found a replacement.
This bug of desire to get back these cloudmaps bites me once in a while, and I have looked around and not found anything worthwhile and that still works (see https://krkeegan.com/new-free-source-for-xplanet-cloud-map/, whose replacement also appears to no longer work). However, I am not very good at DDGing online, but I was wondering if anyone had any experience/suggestions.
I used to use a perl script called download_xplanet_cloudmap that would go through a bunch of mirrors. However, none of them work and I get:
download_xplanet_cloudmap: ERROR: tried to download the file 6 times, but no servers could provide the file
I do get a clouds.jpg map which is of type:
clouds.jpg: JPEG image data, JFIF standard 1.01, aspect ratio, density 1x1, segment length 16
I doubt this is anything worthwhile, and in any case I can not figure out how to look at this jpeg file (JFIF?).
But I was hoping that someone had some experience with this old tool that is quite nice (and still supported by Fedora).
Many thanks and best wishes,
Ranjan
Btw, if you are interested, and do not know of this perl script, it is here:
$ fpaste download_xplanet_cloudmap
Uploading (14.7KiB)...
https://paste.centos.org/view/511bcc1b
1 year, 2 months
Netgear switches between networks
by Geoffrey Leach
Home network has two wi-fi sources (Starlink and Netgear, fwiw).
Occasionally netgear switches betwee primary (Starlink) and secondary
(Netgear) . I'm assuming that Netgear is trying to connect to the
strongest signal. Is there any way to tell Netgear not to switch
networks?
1 year, 2 months