Re: ATA2:00: link is slow to respond....

On Tue, May 5, 2015 at 1:21 PM, Tim <ignored_mailbox(a)yahoo.com.au&gt; wrote: On Tue, 2015-05-05 at 10:25 +0300, Angelo Moreschini wrote: > the problem can depend by the physic set up of the HD (as "master", > "slave", "single drive", ...): this set up can be done by changing the > position of a jumper on the HD... > > I know that, in the past time, the HDs had to be set physically in > this way.., but recently I never heart anymore that the modern HD need > this operation.. If it is a parallel (ribbon cable) type of connection, then master and slave configuring is essential. Sometimes that's done by setting jumpers on the drive, alternatively the drive can be jumpered so that the ribbon cable sets which is slave or master (the ribbon connectors are wired differently, with master on the end, slave in the middle, and the connector that is furthest away from the others goes into the motherboard. But if it's a serial (SATA) connection, only one drive can be connected to a host, so there is no master and slave arrangement. With older hardware, it's sometimes necessary to set a jumper which forces the drive to run in a slower mode, or forces it to pretend its a smaller drive than it really is. -- tim@localhost ~]$ uname -rsvp Linux 3.19.5-100.fc20.i686 #1 SMP Mon Apr 20 20:28:39 UTC 2015 i686 All mail to my mailbox is automatically deleted, there is no point trying to privately email me, I will only read messages posted to the public lists. George Orwell's '1984' was supposed to be a warning against tyranny, not a set of instructions for supposedly democratic governments. -- users mailing list users(a)lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org