Linux version 2.6.8-1.521 (bhcompile@tweety.build.redhat.com) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #1 Mon Aug 16 09:01:18 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001def0000 (usable) BIOS-e820: 000000001def0000 - 000000001deff000 (ACPI data) BIOS-e820: 000000001deff000 - 000000001df00000 (ACPI NVS) BIOS-e820: 000000001df00000 - 000000001e000000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 478MB LOWMEM available. zapping low mappings. On node 0 totalpages: 122608 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 118512 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI present. Built 1 zonelists Kernel command line: ro root=LABEL=/ acpi=off The text above is from a normal working boot with acpi=off The text below is from a hanging boot with ACPI=noirq mapped 4G/4G trampoline to ffff3000. Initializing CPU#0 CPU 0 irqstacks, hard=023c7000 soft=023c6000 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1656.562 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 482000k/490432k available (2012k kernel code, 7672k reserved, 651k data, 140k init, 0k highmem) Calibrating delay loop... 3276.80 BogoMIPS Security Scaffold v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode There is already a security framework initialized, register_security failed. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon (tm) 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 189k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd85e, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: IRQ9 SCI: Edge set to Level Trigger. ACPI: Interpreter enabled ACPI: Usinc PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs *11) ACPI: PCI Interrupt Link [LNKB] (IRQs *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 10) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 5 9 *10 11) ACPI: PCI Interrupt Link [LNKF] (IRQs 5 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 5 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 9 10 *11) ACPI-1133: *** Error: Method execution failed [\_SB_.PCI0.LPCB.LNKU._CRS] (N ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL ACPI-0154: *** Error: Method execution failed [\_BS_.PCI0.LPCB.LNKU._CRS] (N ode 1fe3c7c0), AE_AML_UNINITIALIZED_LOCAL ACPI: PCI Interrupt Link [LNKU] (IRQs 9) *0 ACPI: Embedded Controller [EC0] (gpe 25) Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Using ALI IRQ Router PCI: Using IRQ router ALI [10b9/1533] at 0000:00:07.0 vesafb: probe of vesafb0 failed with error -6 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1097017837.4294966158:0): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 9488DB81FF525AA3 - User ID: Red Hat, Inc. (Kernel Module GPG key) ksign: invalid packet (ctb=00) Unable to load default keyring: error=74 ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb. Activating ISA DMA hang workarounds. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Processor [CPU0] (supports C1 C2) ACPI: Thermal Zone [THRM] (50C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected Ati IGP320/M chipset agpgart: Maximum main memory to use for agp memory: 408M agpgart: AGP aperture is 64M @ 0xf4000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PCI: Assigned IRQ 11 for device 0000:00:03.0 ttyS1 at I/O 0x8428 (irq = 11) is a 8250 ttyS2 at I/O 0x8440 (irq = 11) is a 8250 ttyS3 at I/O 0x8450 (irq = 11) is a 8250 ttyS4 at I/O 0x8460 (irq = 11) is a 8250 ttyS5 at I/O 0x8470 (irq = 11) is a 8250 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Warning: ATI Radeon IGP Northbridge is not yet fully tested. ALI15X3: IDE controller at PCI slot 0000:00:04.0 ALI15X3: chipset revision 196 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio hda: FUJITSU MHT2040AT, ATA DISK drive Using cfq io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Slimtype COMBO LSC-24081M, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.9. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 9362) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: FSB: 132.524 MHz powernow: Found PSB header at 020f0600 powernow: Table version: 0x12 powernow: Flags: 0x0 (Mobile voltage regulator) powernow: Settling Time: 100 microseconds. powernow: Has 18 PST tables. (Only dumping ones relevant to this CPU). powernow: PST:12 (@020f06f2) powernow: cpuid: 0x781 fsb: 133 maxFID: 0x3 startvid: 0xb powernow: FID: 0x4 (5.0x [662MHz]) VID: 0x13 (1.200V) powernow: FID: 0x7 (6.5x [861MHz]) VID: 0x13 (1.200V) powernow: FID: 0xb (8.5x [1126MHz]) VID: 0xe (1.300V) powernow: FID: 0xf (10.5x [1391MHz]) VID: 0xc (1.400V) powernow: FID: 0x3 (12.5x [1656MHz]) VID: 0xb (1.450V) powernow: SGTC: 13333 powernow: Minimum speed 662 MHz. Maximum speed 1656 MHz. ACPI: (supports S0 S3 S4 S5) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). The rest here is from the working setup! kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 140k freed SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Assigned IRQ 11 for device 0000:00:02.0 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: irq 11, pci mem 20836000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:0f.0 ohci_hcd 0000:00:0f.0: OHCI Host Controller ohci_hcd 0000:00:0f.0: irq 10, pci mem 20838000 ohci_hcd 0000:00:0f.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb 1-2: new low speed USB device using address 2 input: USB HID v1.00 Mouse [A4Tech USB Mouse] on usb-0000:00:02.0-2 EXT3 FS on hda3, internal journal device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x54 cdrom: open failed. Adding 979924k swap on /dev/hda5. Priority:-1 extents:1 kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode.