yesterday, i popped open my ASUS G752VL-DH71 to see two available
slots for SSD drives, both clearly labelled "PCIE only", so i inserted
a new samsung 950 PRO in slot 1, closed it up and booted and
(reproducing from scribbling on some paper, just the first bit):
ata1.00: failed to enable AA (error_mask=0x4)
ata1.00: revalidation failed
etc, etc, at which point it finally dropped me into an emergency
shell.
i didn't have time to debug so i just removed it and got back to
work, but is there something i'm forgetting here? here's the samsung
page for that drive:
http://www.samsung.com/semiconductor/minisite/ssd/product/consumer/950pro...
thoughts? like i said, i did not invest a lot of time trying to track
this down as i have way too much to do, but if there's something
stupid i've done, it would be good to know.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter:
http://twitter.com/rpjday
LinkedIn:
http://ca.linkedin.com/in/rpjday
========================================================================