10:06 a.m.
Good morning,
/var/log/messages is being filled with following message "multipathd: 104:0:
reinstated". I though it might be a bad controller card, or something wrong with the
hardware as suggested in IRC, but I have installed FC 22 64bit on two separate machines
(same configuration) and I’m getting these same message.
The messages don’t seem to be effecting performance or have any effect on data, and short
of being annoying, I want to make sure there is not some more serious/heinous issue going
on that I need to be aware of.
Machine Specs:
Proliant DL160 Smart Array E200 controller running RAID 1 (250GB mirrored).
[root@postoffice ~]# blkid
/dev/block/253:4: LABEL="root"
UUID="7e2a3fef-cab0-44a3-b5ec-cd9a50267ee0" TYPE="xfs"
/dev/block/253:2: UUID="dBG0Mg-6MaT-Jfm3-XuFH-5PeA-a881-D7VWfa"
TYPE="LVM2_member" PARTUUID="449dbbad-02"
/dev/block/253:1: UUID="b8cfeac4-9d28-402d-9ba6-7f41f583508a"
TYPE="ext4" PARTUUID="449dbbad-01"
/dev/block/253:3: UUID="362b77ca-8bf7-434a-96cf-6e30fd9c5a79"
TYPE="swap"
/dev/cciss/c0d0: PTUUID="449dbbad" PTTYPE="dos"
/dev/sda1: UUID="6412b71f-3dfb-41c9-82af-5030dcad856d" TYPE="ext3"
/dev/mapper/mpatha: PTUUID="449dbbad" PTTYPE="dos"
[root@postoffice ~]# multipath -l
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
mpatha (3600508b10010503953574630334a0004) dm-0 HP ,LOGICAL VOLUME
size=233G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
`- 0:0:0:0 cciss/c0d0 104:0 active undef running
[root@postoffice ~]# more /etc/fstab
...
UUID=7e2a3fef-cab0-44a3-b5ec-cd9a50267ee0 / xfs defaults
0 0
UUID=b8cfeac4-9d28-402d-9ba6-7f41f583508a /boot ext4 defaults
1 2
UUID=362b77ca-8bf7-434a-96cf-6e30fd9c5a79 swap swap defaults
0 0
/dev/sda1 /media/USBBackup_001 auto defaults 0 0
[root@postoffice ~]# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
devtmpfs 1966 0 1966 0% /dev
tmpfs 1976 0 1976 0% /dev/shm
tmpfs 1976 1 1976 1% /run
tmpfs 1976 0 1976 0% /sys/fs/cgroup
/dev/mapper/fedora_postoffice-root 233358 168507 64852 73% /
tmpfs 1976 0 1976 0% /tmp
/dev/mapper/mpatha1 843 148 636 19% /boot
/dev/sda1 1691174 329305 1275957 21% /media/USBBackup_001
tmpfs 396 0 396 0% /run/user/1000
Sample message logs:
Aug 14 07:24:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:24:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:06 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:11 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:16 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:25:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:06 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:11 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:16 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:21 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:26 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:31 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:36 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:41 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:46 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:51 postoffice multipathd: 104:0: reinstated
Aug 14 07:26:56 postoffice multipathd: 104:0: reinstated
Aug 14 07:27:01 postoffice multipathd: 104:0: reinstated
Aug 14 07:27:06 postoffice multipathd: 104:0: reinstated
7:39 p.m.
On Fri, 14 Aug 2015, Shaheen Bakhtiar wrote:
[root@postoffice ~]# multipath -l
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
Aug 14 07:58:43 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
mpatha (3600508b10010503953574630334a0004) dm-0 HP ,LOGICAL VOLUME
size=233G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=0 status=active
`- 0:0:0:0 cciss/c0d0 104:0 active undef running
[...]
Aug 14 07:26:46 postoffice multipathd: 104:0: reinstated
Maybe the log will disappear if you include the raid device in the blacklist
section in the multipath configuration. Or (if you don't use SAN storage as
it seems) you can disable the multipathd daemon.
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/...
--
Francisco Javier Tsao Santín
http://gattaca.es
1024D/71CF4D62 42 F1 53 35 EF 98 98 8A FC 6C 56 B3 4C A7 7D FB
7:59 a.m.
On Aug 14, 2015, at 5:39 PM, Francisco J. Tsao Santin
<tsao(a)gpul.org> wrote:
On Fri, 14 Aug 2015, Shaheen Bakhtiar wrote:
>
> [root@postoffice ~]# multipath -l
> Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
> Aug 14 07:58:43 | cciss/c0d0: No fc_host device for 'host0'
> Aug 14 07:58:43 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
> mpatha (3600508b10010503953574630334a0004) dm-0 HP ,LOGICAL VOLUME
> size=233G features='1 queue_if_no_path' hwhandler='0' wp=rw
> `-+- policy='service-time 0' prio=0 status=active
> `- 0:0:0:0 cciss/c0d0 104:0 active undef running
[...]
>
> Aug 14 07:26:46 postoffice multipathd: 104:0: reinstated
Maybe the log will disappear if you include the raid device in the blacklist
section in the multipath configuration. Or (if you don't use SAN storage as
it seems) you can disable the multipathd daemon.
https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/...
--
Francisco Javier Tsao Santín
http://gattaca.es
1024D/71CF4D62 42 F1 53 35 EF 98 98 8A FC 6C 56 B3 4C A7 7D FB--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct: http://fedoraproject.org/code-of-conduct
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
I would like to, but this is a root partition so when I do multipath -F it says device is
in use, I would also need to update fstab, to reflect the new locations of root, swap, and
boot. The question is this…. Can I do so without having to created a new initrd? or
reconfiguring grub?
8:14 a.m.
2015-08-17 14:59 GMT+02:00 Shaheen Bakhtiar <shashaness(a)hotmail.com>:
I would like to, but this is a root partition so when I do multipath -F it
says device is in use, I would also need to update fstab, to reflect the
new locations of root, swap, and boot. The question is this…. Can I do so
without having to created a new initrd? or reconfiguring grub
Did you blacklisted the device in /etc/multipath.conf and reloaded the
service? If you did it, what is the output of multipath -ll command?
About /etc/fstab, I think you don't need update nothing, as the partitions
are identified by UUID not by device name.
--
Francisco J. Tsao Santín
http://gattaca.es
1024D/71CF4D62 42 F1 53 35 EF 98 98 8A FC 6C 56 B3 4C A7 7D FB
3:29 p.m.
On Aug 17, 2015, at 6:14 AM, Fran Tsao Santín <tsao(a)gpul.org>
wrote:
2015-08-17 14:59 GMT+02:00 Shaheen Bakhtiar <shashaness(a)hotmail.com
<mailto:shashaness@hotmail.com>>:
I would like to, but this is a root partition so when I do multipath -F it says device is
in use, I would also need to update fstab, to reflect the new locations of root, swap, and
boot. The question is this…. Can I do so without having to created a new initrd? or
reconfiguring grub
Did you blacklisted the device in /etc/multipath.conf and reloaded the service? If you
did it, what is the output of multipath -ll command?
About /etc/fstab, I think you don't need update nothing, as the partitions are
identified by UUID not by device name.
--
Francisco J. Tsao Santín
http://gattaca.es <http://gattaca.es/>
1024D/71CF4D62 42 F1 53 35 EF 98 98 8A FC 6C 56 B3 4C A7 7D FB
So...I thoroughly am not getting multipath at all :(
Where is the UUID for /boot partition?? The one that is NOT associated with multipathd? I
want to setup fstab and disable the device in in multipathd.conf, but I’m afraid if I do
that right now the loader won’t be able to find the boot partition as it still points to
mpatha1. In fact, all references in grub.conf are to UUID
9abf4d-17aa-47fb-8f22-5d0d33711684 which is /dev/mapper/mpatha1
Am I missing something??
[root@smtp ~]# multipath -F
Sep 03 13:50:55 | mpatha2: map in use
Sep 03 13:50:55 | failed to remove multipath map mpatha
[root@smtp ~]# more /etc/fstab
#
# /etc/fstab
# Created by anaconda on Tue Aug 11 20:01:08 2015
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
#/dev/mapper/fedora_smtp-root / xfs defaults 0 0
#/dev/mapper/fedora_smtp-swap swap swap defaults 0 0
UUID=529abf4d-17aa-47fb-8f22-5d0d33711684 / xfs defaults
0 0
UUID=19a56b93-5a7d-48ca-8bc4-4ec461292dc0 /boot ext4 defaults
1 2
UUID=59c17540-971e-4cc9-8d3b-3e29fa9d62f6 swap swap defaults
0 0
[root@smtp ~]# df -m
Filesystem 1M-blocks Used Available Use% Mounted on
devtmpfs 1966 0 1966 0% /dev
tmpfs 1976 0 1976 0% /dev/shm
tmpfs 1976 1 1976 1% /run
tmpfs 1976 0 1976 0% /sys/fs/cgroup
/dev/mapper/fedora_smtp-root 233358 3553 229806 2% /
tmpfs 1976 1 1976 1% /tmp
/dev/mapper/mpatha1 380 123 234 35% /boot
tmpfs 396 0 396 0% /run/user/1000
[root@smtp ~]# fdisk -l /dev/cciss/c0d0
Disk /dev/cciss/c0d0: 232.9 GiB, 250023444480 bytes, 488327040 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xea0e0059
Device Boot Start End Sectors Size Id Type
/dev/cciss/c0d0p1 * 2048 821247 819200 400M 83 Linux
/dev/cciss/c0d0p2 821248 488310783 487489536 232.5G 8e Linux LVM
[root@smtp ~]# blkid
/dev/mapper/mpatha1: UUID="19a56b93-5a7d-48ca-8bc4-4ec461292dc0"
TYPE="ext4" PARTUUID="ea0e0059-01"
/dev/mapper/mpatha2: UUID="BWFbnX-pWQM-8zqS-SIBk-fTak-Cxzj-ksp0Au"
TYPE="LVM2_member" PARTUUID="ea0e0059-02"
/dev/mapper/fedora_smtp-root: UUID="529abf4d-17aa-47fb-8f22-5d0d33711684"
TYPE="xfs"
/dev/mapper/fedora_smtp-swap: UUID="59c17540-971e-4cc9-8d3b-3e29fa9d62f6"
TYPE="swap"
/dev/cciss/c0d0: PTUUID="ea0e0059" PTTYPE="dos"
/dev/mapper/mpatha: PTUUID="ea0e0059" PTTYPE=“dos"
[root@smtp ~]# multipath -ll
Sep 03 13:53:16 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:53:16 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:53:16 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
mpatha (3600508b10010503953574630324d0003) dm-0 HP ,LOGICAL VOLUME
size=233G features='1 queue_if_no_path' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=1 status=active
`- 0:0:0:0 cciss/c0d0 104:0 active ready running
[root@smtp ~]# multipath -v3
Sep 03 13:52:15 | loading /lib64/multipath/libcheckdirectio.so checker
Sep 03 13:52:15 | loading /lib64/multipath/libprioconst.so prioritizer
Sep 03 13:52:15 | sr0: device node name blacklisted
Sep 03 13:52:15 | cciss/c0d0: not found in pathvec
Sep 03 13:52:15 | cciss/c0d0: mask = 0x3f
Sep 03 13:52:15 | cciss/c0d0: dev_t = 104:0
Sep 03 13:52:15 | cciss/c0d0: size = 488327040
Sep 03 13:52:15 | cciss/c0d0: vendor = HP
Sep 03 13:52:15 | cciss/c0d0: product = LOGICAL VOLUME
Sep 03 13:52:15 | cciss/c0d0: rev = 1.78
Sep 03 13:52:15 | cciss/c0d0: h:b:t:l = 0:0:0:0
Sep 03 13:52:15 | cciss/c0d0: 59844 cyl, 255 heads, 32 sectors/track, start at 0
Sep 03 13:52:15 | cciss/c0d0: serial = PA6C90P9SWF02M
Sep 03 13:52:15 | cciss/c0d0: get_state
Sep 03 13:52:15 | loading /lib64/multipath/libchecktur.so checker
Sep 03 13:52:15 | cciss/c0d0: path checker = tur (controller setting)
Sep 03 13:52:15 | cciss/c0d0: checker timeout = 300000 ms (internal default)
Sep 03 13:52:15 | cciss/c0d0: state = up
Sep 03 13:52:15 | cciss/c0d0: uid_attribute = ID_SERIAL (internal default)
Sep 03 13:52:15 | cciss/c0d0: uid = 3600508b10010503953574630324d0003 (udev)
Sep 03 13:52:15 | cciss/c0d0: detect_prio = 1 (config file default)
Sep 03 13:52:15 | cciss/c0d0: prio = const (controller setting)
Sep 03 13:52:15 | cciss/c0d0: prio args = (null) (controller setting)
Sep 03 13:52:15 | cciss/c0d0: const prio = 1
Sep 03 13:52:15 | dm-0: device node name blacklisted
Sep 03 13:52:15 | dm-1: device node name blacklisted
Sep 03 13:52:15 | dm-2: device node name blacklisted
Sep 03 13:52:15 | dm-3: device node name blacklisted
Sep 03 13:52:15 | dm-4: device node name blacklisted
===== paths list =====
Sep 03 13:52:15 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:52:15 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:52:15 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
uuid hcil dev dev_t pri dm_st chk_st ve
3600508b10010503953574630324d0003 0:0:0:0 cciss/c0d0 104:0 1 undef ready HP
Sep 03 13:52:15 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:52:15 | cciss/c0d0: No fc_host device for 'host0'
Sep 03 13:52:15 | cciss/c0d0: No fc_remote_port device for 'rport-0:0-0'
Sep 03 13:52:15 | params = 1 queue_if_no_path 0 1 1 service-time 0 1 2 104:0 1 1
Sep 03 13:52:15 | status = 2 0 0 0 1 1 A 0 1 2 104:0 A 0 0 1
Sep 03 13:52:15 | mpatha: disassemble map [1 queue_if_no_path 0 1 1 service-time 0 1 2
104:0 1 1 ]
Sep 03 13:52:15 | mpatha: disassemble status [2 0 0 0 1 1 A 0 1 2 104:0 A 0 0 1 ]
Sep 03 13:52:15 | tur checker refcount 1
Sep 03 13:52:15 | const prioritizer refcount 1
Sep 03 13:52:15 | unloading const prioritizer
Sep 03 13:52:15 | unloading tur checker
Sep 03 13:52:15 | unloading directio checker
[root@smtp ~]# tail -f /var/log/messages
Sep 3 14:19:44 smtp multipathd: 104:0: reinstated
Sep 3 14:19:49 smtp multipathd: 104:0: reinstated
Sep 3 14:19:54 smtp multipathd: 104:0: reinstated
Sep 3 14:19:59 smtp multipathd: 104:0: reinstated
Sep 3 14:20:04 smtp multipathd: 104:0: reinstated
Sep 3 14:20:09 smtp multipathd: 104:0: reinstated
Sep 3 14:20:14 smtp multipathd: 104:0: reinstated
Sep 3 14:20:19 smtp multipathd: 104:0: reinstated
Sep 3 14:20:24 smtp multipathd: 104:0: reinstated
Sep 3 14:20:29 smtp multipathd: 104:0: reinstated
Sep 3 14:20:34 smtp multipathd: 104:0: reinstated
4:35 p.m.
On Thu, 3 Sep 2015, Shaheen Bakhtiar wrote:
So...I thoroughly am not getting multipath at all :(
Where is the UUID for /boot partition?? The one that is NOT associated with
multipathd? I want to setup fstab and disable the device in in multipathd.conf,
but I’m afraid if I do that right now the loader won’t be able to find the boot
partition as it still points to mpatha1. In fact, all references in grub.conf
are to UUID 9abf4d-17aa-47fb-8f22-5d0d33711684 which is /dev/mapper/mpatha1
Ok, you can be sure the real device under /boot in /dev/disk/by-uuid/
I guess you will have 9abf4d-17aa-47fb-8f22-5d0d33711684 pointing to /dev/cciss/c0d0p1
If I'm right, I think you will not have problems at boot time...
--
Francisco Javier Tsao Santín
http://gattaca.es
1024D/71CF4D62 42 F1 53 35 EF 98 98 8A FC 6C 56 B3 4C A7 7D FB
3151
days inactive
3171
days old
5 comments
2 participants
participants (2)
-
Francisco J. Tsao Santin -
Shawn Bakhtiar