parted -l

Model: ATA SK hynix SC311 S (scsi) Disk /dev/sdb: 512GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Disk Flags: pmbr_boot

Number Start End Size File system Name Flags 1 1049kB 787MB 786MB fat32 EFI system partition boot, esp 2 787MB 6156MB 5369MB fat32 Basic data partition msftres 3 6156MB 39.7GB 33.6GB linux-swap(v1) swap 4 39.7GB 40.2GB 524MB ext4 Boot0 5 40.2GB 145GB 105GB VolSys0 lvm 6 145GB 250GB 105GB VolUsr lvm 7 250GB 250GB 524MB ext4 Boot1 8 250GB 355GB 105GB VolSys1 lvm 9 355GB 460GB 105GB ext4 Backup0

Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. Ignore/Cancel?

What should I do?

=========================================================================== Patrick DUPRÉ | | email: pdupre@gmx.com Laboratoire interdisciplinaire Carnot de Bourgogne 9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE Tel: +33 (0)380395988 ===========================================================================