9:01 a.m.
Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1475719
Fedora - Add new package CRIU for Docker on z Systems
Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20844822
Testing:
The kernel from koji was used to run the CRIU test suite (zdtm)
on a RHEL s390x system. The kernel was started using kexec.
# ./zdtm.py run -a --keep-going
[...]
################### 1 TEST(S) FAILED (TOTAL 317/SKIPPED 34) ####################
* zdtm/static/socket-tcp-nfconntrack(h)
##################################### FAIL #####################################
The are always tests which can fail in the CRIU test suite and this one
fails during the following command:
# iptables -w -A INPUT -i lo -p tcp -m state --state NEW,ESTABLISHED -j ACCEPT
iptables: No chain/target/match by that name.
So this failure seems to be unrelated to the actual checkpointing feature of
CRIU.
Signed-off-by: Adrian Reber <adrian(a)lisas.de>
---
kernel-s390x-debug.config | 3 ++-
kernel-s390x.config | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
index a69ba347..c89c3196 100644
--- a/kernel-s390x-debug.config
+++ b/kernel-s390x-debug.config
@@ -654,7 +654,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2582,6 +2582,7 @@ CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MEMTEST is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEN_A21_WDT is not set
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_MFD_88PM800 is not set
diff --git a/kernel-s390x.config b/kernel-s390x.config
index 870bed49..7e7ae3ae 100644
--- a/kernel-s390x.config
+++ b/kernel-s390x.config
@@ -653,7 +653,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2561,6 +2561,7 @@ CONFIG_MEMSTICK_REALTEK_USB=m
CONFIG_MEMSTICK_TIFM_MS=m
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
# CONFIG_MEMTEST is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEN_A21_WDT is not set
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_MFD_88PM800 is not set
--
2.13.3
9:30 a.m.
On Fri, Jul 28, 2017 at 3:01 PM, Adrian Reber <adrian(a)lisas.de> wrote:
Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1475719
Fedora - Add new package CRIU for Docker on z Systems
Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20844822
Testing:
The kernel from koji was used to run the CRIU test suite (zdtm)
on a RHEL s390x system. The kernel was started using kexec.
# ./zdtm.py run -a --keep-going
[...]
################### 1 TEST(S) FAILED (TOTAL 317/SKIPPED 34) ####################
* zdtm/static/socket-tcp-nfconntrack(h)
##################################### FAIL #####################################
The are always tests which can fail in the CRIU test suite and this one
fails during the following command:
# iptables -w -A INPUT -i lo -p tcp -m state --state NEW,ESTABLISHED -j ACCEPT
iptables: No chain/target/match by that name.
So this failure seems to be unrelated to the actual checkpointing feature of
CRIU.
Signed-off-by: Adrian Reber <adrian(a)lisas.de>
---
kernel-s390x-debug.config | 3 ++-
kernel-s390x.config | 3 ++-
2 files changed, 4 insertions(+), 2 deletions(-)
This is incorrect, these files are auto generated, you need to change
the appropriate option within the baseconfig tree and then run
./build_configs.sh
$ grep -R CONFIG_CHECKPOINT_RESTORE baseconfig/
baseconfig/x86/x86_64/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
baseconfig/CONFIG_CHECKPOINT_RESTORE:# CONFIG_CHECKPOINT_RESTORE is not set
baseconfig/powerpc/powerpc64le/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
baseconfig/arm/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
11:23 a.m.
On Fri, Jul 28, 2017 at 03:30:07PM +0100, Peter Robinson wrote:
On Fri, Jul 28, 2017 at 3:01 PM, Adrian Reber <adrian(a)lisas.de>
wrote:
> Bugzilla:
> https://bugzilla.redhat.com/show_bug.cgi?id=1475719
> Fedora - Add new package CRIU for Docker on z Systems
>
> Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20844822
>
> Testing:
> The kernel from koji was used to run the CRIU test suite (zdtm)
> on a RHEL s390x system. The kernel was started using kexec.
>
> # ./zdtm.py run -a --keep-going
> [...]
> ################### 1 TEST(S) FAILED (TOTAL 317/SKIPPED 34) ####################
> * zdtm/static/socket-tcp-nfconntrack(h)
> ##################################### FAIL #####################################
>
> The are always tests which can fail in the CRIU test suite and this one
> fails during the following command:
> # iptables -w -A INPUT -i lo -p tcp -m state --state NEW,ESTABLISHED -j ACCEPT
> iptables: No chain/target/match by that name.
>
> So this failure seems to be unrelated to the actual checkpointing feature of
> CRIU.
>
> Signed-off-by: Adrian Reber <adrian(a)lisas.de>
> ---
> kernel-s390x-debug.config | 3 ++-
> kernel-s390x.config | 3 ++-
> 2 files changed, 4 insertions(+), 2 deletions(-)
This is incorrect, these files are auto generated, you need to change
the appropriate option within the baseconfig tree and then run
./build_configs.sh
$ grep -R CONFIG_CHECKPOINT_RESTORE baseconfig/
baseconfig/x86/x86_64/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
baseconfig/CONFIG_CHECKPOINT_RESTORE:# CONFIG_CHECKPOINT_RESTORE is not set
baseconfig/powerpc/powerpc64le/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
baseconfig/arm/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
Ah, was not aware of that. Thanks. So I change the files in baseconfig
and commit the generated file into git as well?
Adrian
11:54 a.m.
kernel.On Fri, Jul 28, 2017 at 5:23 PM, Adrian Reber <adrian(a)lisas.de> wrote:
On Fri, Jul 28, 2017 at 03:30:07PM +0100, Peter Robinson wrote:
> On Fri, Jul 28, 2017 at 3:01 PM, Adrian Reber <adrian(a)lisas.de> wrote:
> > Bugzilla:
> > https://bugzilla.redhat.com/show_bug.cgi?id=1475719
> > Fedora - Add new package CRIU for Docker on z Systems
> >
> > Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20844822
> >
> > Testing:
> > The kernel from koji was used to run the CRIU test suite (zdtm)
> > on a RHEL s390x system. The kernel was started using kexec.
> >
> > # ./zdtm.py run -a --keep-going
> > [...]
> > ################### 1 TEST(S) FAILED (TOTAL 317/SKIPPED 34)
####################
> > * zdtm/static/socket-tcp-nfconntrack(h)
> > ##################################### FAIL
#####################################
> >
> > The are always tests which can fail in the CRIU test suite and this one
> > fails during the following command:
> > # iptables -w -A INPUT -i lo -p tcp -m state --state NEW,ESTABLISHED -j
ACCEPT
> > iptables: No chain/target/match by that name.
> >
> > So this failure seems to be unrelated to the actual checkpointing feature of
> > CRIU.
> >
> > Signed-off-by: Adrian Reber <adrian(a)lisas.de>
> > ---
> > kernel-s390x-debug.config | 3 ++-
> > kernel-s390x.config | 3 ++-
> > 2 files changed, 4 insertions(+), 2 deletions(-)
>
> This is incorrect, these files are auto generated, you need to change
> the appropriate option within the baseconfig tree and then run
> ./build_configs.sh
>
> $ grep -R CONFIG_CHECKPOINT_RESTORE baseconfig/
> baseconfig/x86/x86_64/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
> baseconfig/CONFIG_CHECKPOINT_RESTORE:# CONFIG_CHECKPOINT_RESTORE is not set
> baseconfig/powerpc/powerpc64le/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
> baseconfig/arm/CONFIG_CHECKPOINT_RESTORE:CONFIG_CHECKPOINT_RESTORE=y
Ah, was not aware of that. Thanks. So I change the files in baseconfig
and commit the generated file into git as well?
Correct:
cp baseconfig/x86/x86_64/CONFIG_CHECKPOINT_RESTORE baseconfig/s390x/
git add baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
./build_configs.sh
Add changelog to kernel.spec
Commit
12:07 p.m.
New subject: [PATCH v2] enable CHECKPOINT_RESTORE on s390x
Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1475719
Fedora - Add new package CRIU for Docker on z Systems
Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20859205
Testing:
The kernel from koji was used to run the CRIU test suite (zdtm)
on a RHEL s390x system. The kernel was started using kexec.
# ./zdtm.py run -a --keep-going
[...]
################## ALL TEST(S) PASSED (TOTAL 317/SKIPPED 31) ###################
Signed-off-by: Adrian Reber <adrian(a)lisas.de>
---
baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE | 1 +
baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY | 1 +
kernel-s390x-debug.config | 3 ++-
kernel-s390x.config | 3 ++-
kernel.spec | 3 +++
5 files changed, 9 insertions(+), 2 deletions(-)
create mode 100644 baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
create mode 100644 baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
new file mode 100644
index 00000000..c554a09c
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
@@ -0,0 +1 @@
+CONFIG_CHECKPOINT_RESTORE=y
diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
new file mode 100644
index 00000000..356f2edd
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
@@ -0,0 +1 @@
+CONFIG_MEM_SOFT_DIRTY=y
diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
index a69ba347..25977b5f 100644
--- a/kernel-s390x-debug.config
+++ b/kernel-s390x-debug.config
@@ -654,7 +654,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2573,6 +2573,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEMSTICK_DEBUG is not set
# CONFIG_MEMSTICK is not set
CONFIG_MEMSTICK_JMICRON_38X=m
diff --git a/kernel-s390x.config b/kernel-s390x.config
index 870bed49..7f0886fc 100644
--- a/kernel-s390x.config
+++ b/kernel-s390x.config
@@ -653,7 +653,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2552,6 +2552,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEMSTICK_DEBUG is not set
# CONFIG_MEMSTICK is not set
CONFIG_MEMSTICK_JMICRON_38X=m
diff --git a/kernel.spec b/kernel.spec
index 9ece7387..4832501e 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -2195,6 +2195,9 @@ fi
#
#
%changelog
+* Fri Jul 28 2017 Adrian Reber <adrian(a)lisas.de>
+- Enable CHECKPOINT_RESTORE on s390x
+
* Fri Jul 28 2017 Laura Abbott <labbott(a)fedoraproject.org> - 4.13.0-0.rc2.git3.1
- Linux v4.13-rc2-110-g0b5477d9dabd
--
2.13.3
12:42 p.m.
New subject: [PATCH v2] enable CHECKPOINT_RESTORE on s390x
On 07/28/2017 10:07 AM, Adrian Reber wrote:
Bugzilla:
https://bugzilla.redhat.com/show_bug.cgi?id=1475719
Fedora - Add new package CRIU for Docker on z Systems
Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20859205
Testing:
The kernel from koji was used to run the CRIU test suite (zdtm)
on a RHEL s390x system. The kernel was started using kexec.
# ./zdtm.py run -a --keep-going
[...]
################## ALL TEST(S) PASSED (TOTAL 317/SKIPPED 31) ###################
Signed-off-by: Adrian Reber <adrian(a)lisas.de>
---
baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE | 1 +
baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY | 1 +
kernel-s390x-debug.config | 3 ++-
kernel-s390x.config | 3 ++-
kernel.spec | 3 +++
5 files changed, 9 insertions(+), 2 deletions(-)
create mode 100644 baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
create mode 100644 baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
new file mode 100644
index 00000000..c554a09c
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
@@ -0,0 +1 @@
+CONFIG_CHECKPOINT_RESTORE=y
diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
new file mode 100644
index 00000000..356f2edd
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
@@ -0,0 +1 @@
+CONFIG_MEM_SOFT_DIRTY=y
diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
index a69ba347..25977b5f 100644
--- a/kernel-s390x-debug.config
+++ b/kernel-s390x-debug.config
@@ -654,7 +654,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2573,6 +2573,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEMSTICK_DEBUG is not set
# CONFIG_MEMSTICK is not set
CONFIG_MEMSTICK_JMICRON_38X=m
diff --git a/kernel-s390x.config b/kernel-s390x.config
index 870bed49..7f0886fc 100644
--- a/kernel-s390x.config
+++ b/kernel-s390x.config
@@ -653,7 +653,7 @@ CONFIG_CGROUPS=y
# CONFIG_CHARGER_RT9455 is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
+CONFIG_CHECKPOINT_RESTORE=y
CONFIG_CHECK_STACK=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1=m
@@ -2552,6 +2552,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY is not set
+CONFIG_MEM_SOFT_DIRTY=y
# CONFIG_MEMSTICK_DEBUG is not set
# CONFIG_MEMSTICK is not set
CONFIG_MEMSTICK_JMICRON_38X=m
diff --git a/kernel.spec b/kernel.spec
index 9ece7387..4832501e 100644
--- a/kernel.spec
+++ b/kernel.spec
@@ -2195,6 +2195,9 @@ fi
#
#
%changelog
+* Fri Jul 28 2017 Adrian Reber <adrian(a)lisas.de>
+- Enable CHECKPOINT_RESTORE on s390x
+
* Fri Jul 28 2017 Laura Abbott <labbott(a)fedoraproject.org> - 4.13.0-0.rc2.git3.1
- Linux v4.13-rc2-110-g0b5477d9dabd
Thanks, applied to rawhide.
2:14 a.m.
New subject: [PATCH v2] enable CHECKPOINT_RESTORE on s390x
On Fri, Jul 28, 2017 at 10:42:27AM -0700, Laura Abbott wrote:
On 07/28/2017 10:07 AM, Adrian Reber wrote:
> Bugzilla:
> https://bugzilla.redhat.com/show_bug.cgi?id=1475719
> Fedora - Add new package CRIU for Docker on z Systems
>
> Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20859205
>
> Testing:
> The kernel from koji was used to run the CRIU test suite (zdtm)
> on a RHEL s390x system. The kernel was started using kexec.
>
> # ./zdtm.py run -a --keep-going
> [...]
> ################## ALL TEST(S) PASSED (TOTAL 317/SKIPPED 31) ###################
>
> Signed-off-by: Adrian Reber <adrian(a)lisas.de>
> ---
> baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE | 1 +
> baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY | 1 +
> kernel-s390x-debug.config | 3 ++-
> kernel-s390x.config | 3 ++-
> kernel.spec | 3 +++
> 5 files changed, 9 insertions(+), 2 deletions(-)
> create mode 100644 baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
> create mode 100644 baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
>
> diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
> new file mode 100644
> index 00000000..c554a09c
> --- /dev/null
> +++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
> @@ -0,0 +1 @@
> +CONFIG_CHECKPOINT_RESTORE=y
> diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
> new file mode 100644
> index 00000000..356f2edd
> --- /dev/null
> +++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
> @@ -0,0 +1 @@
> +CONFIG_MEM_SOFT_DIRTY=y
> diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
> index a69ba347..25977b5f 100644
> --- a/kernel-s390x-debug.config
> +++ b/kernel-s390x-debug.config
> @@ -654,7 +654,7 @@ CONFIG_CGROUPS=y
> # CONFIG_CHARGER_RT9455 is not set
> # CONFIG_CHARGER_SBS is not set
> # CONFIG_CHARGER_SMB347 is not set
> -# CONFIG_CHECKPOINT_RESTORE is not set
> +CONFIG_CHECKPOINT_RESTORE=y
> CONFIG_CHECK_STACK=y
> CONFIG_CHELSIO_T1_1G=y
> CONFIG_CHELSIO_T1=m
> @@ -2573,6 +2573,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
> CONFIG_MEMORY_HOTPLUG=y
> CONFIG_MEMORY_HOTREMOVE=y
> # CONFIG_MEMORY is not set
> +CONFIG_MEM_SOFT_DIRTY=y
> # CONFIG_MEMSTICK_DEBUG is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_MEMSTICK_JMICRON_38X=m
> diff --git a/kernel-s390x.config b/kernel-s390x.config
> index 870bed49..7f0886fc 100644
> --- a/kernel-s390x.config
> +++ b/kernel-s390x.config
> @@ -653,7 +653,7 @@ CONFIG_CGROUPS=y
> # CONFIG_CHARGER_RT9455 is not set
> # CONFIG_CHARGER_SBS is not set
> # CONFIG_CHARGER_SMB347 is not set
> -# CONFIG_CHECKPOINT_RESTORE is not set
> +CONFIG_CHECKPOINT_RESTORE=y
> CONFIG_CHECK_STACK=y
> CONFIG_CHELSIO_T1_1G=y
> CONFIG_CHELSIO_T1=m
> @@ -2552,6 +2552,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
> CONFIG_MEMORY_HOTPLUG=y
> CONFIG_MEMORY_HOTREMOVE=y
> # CONFIG_MEMORY is not set
> +CONFIG_MEM_SOFT_DIRTY=y
> # CONFIG_MEMSTICK_DEBUG is not set
> # CONFIG_MEMSTICK is not set
> CONFIG_MEMSTICK_JMICRON_38X=m
> diff --git a/kernel.spec b/kernel.spec
> index 9ece7387..4832501e 100644
> --- a/kernel.spec
> +++ b/kernel.spec
> @@ -2195,6 +2195,9 @@ fi
> #
> #
> %changelog
> +* Fri Jul 28 2017 Adrian Reber <adrian(a)lisas.de>
> +- Enable CHECKPOINT_RESTORE on s390x
> +
> * Fri Jul 28 2017 Laura Abbott <labbott(a)fedoraproject.org> -
4.13.0-0.rc2.git3.1
> - Linux v4.13-rc2-110-g0b5477d9dabd
>
Thanks, applied to rawhide.
I think that not all parts of my patch have been applied. The following
part is not in git:
diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
new file mode 100644
index 00000000..c554a09c
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
@@ -0,0 +1 @@
+CONFIG_CHECKPOINT_RESTORE=y
diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
new file mode 100644
index 00000000..356f2edd
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
@@ -0,0 +1 @@
+CONFIG_MEM_SOFT_DIRTY=y
Running ./build_configs.sh removes the CHECKPOINT_RESTORE option again
from the configs. The same happens also for CONFIG_AQTION. This is also
gone after running ./build_configs.sh.
Adrian
9:13 a.m.
New subject: [PATCH v2] enable CHECKPOINT_RESTORE on s390x
On 07/29/2017 12:14 AM, Adrian Reber wrote:
On Fri, Jul 28, 2017 at 10:42:27AM -0700, Laura Abbott wrote:
> On 07/28/2017 10:07 AM, Adrian Reber wrote:
>> Bugzilla:
>> https://bugzilla.redhat.com/show_bug.cgi?id=1475719
>> Fedora - Add new package CRIU for Docker on z Systems
>>
>> Koji: https://koji.fedoraproject.org/koji/taskinfo?taskID=20859205
>>
>> Testing:
>> The kernel from koji was used to run the CRIU test suite (zdtm)
>> on a RHEL s390x system. The kernel was started using kexec.
>>
>> # ./zdtm.py run -a --keep-going
>> [...]
>> ################## ALL TEST(S) PASSED (TOTAL 317/SKIPPED 31)
###################
>>
>> Signed-off-by: Adrian Reber <adrian(a)lisas.de>
>> ---
>> baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE | 1 +
>> baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY | 1 +
>> kernel-s390x-debug.config | 3 ++-
>> kernel-s390x.config | 3 ++-
>> kernel.spec | 3 +++
>> 5 files changed, 9 insertions(+), 2 deletions(-)
>> create mode 100644 baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
>> create mode 100644 baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
>>
>> diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
>> new file mode 100644
>> index 00000000..c554a09c
>> --- /dev/null
>> +++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
>> @@ -0,0 +1 @@
>> +CONFIG_CHECKPOINT_RESTORE=y
>> diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
>> new file mode 100644
>> index 00000000..356f2edd
>> --- /dev/null
>> +++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
>> @@ -0,0 +1 @@
>> +CONFIG_MEM_SOFT_DIRTY=y
>> diff --git a/kernel-s390x-debug.config b/kernel-s390x-debug.config
>> index a69ba347..25977b5f 100644
>> --- a/kernel-s390x-debug.config
>> +++ b/kernel-s390x-debug.config
>> @@ -654,7 +654,7 @@ CONFIG_CGROUPS=y
>> # CONFIG_CHARGER_RT9455 is not set
>> # CONFIG_CHARGER_SBS is not set
>> # CONFIG_CHARGER_SMB347 is not set
>> -# CONFIG_CHECKPOINT_RESTORE is not set
>> +CONFIG_CHECKPOINT_RESTORE=y
>> CONFIG_CHECK_STACK=y
>> CONFIG_CHELSIO_T1_1G=y
>> CONFIG_CHELSIO_T1=m
>> @@ -2573,6 +2573,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
>> CONFIG_MEMORY_HOTPLUG=y
>> CONFIG_MEMORY_HOTREMOVE=y
>> # CONFIG_MEMORY is not set
>> +CONFIG_MEM_SOFT_DIRTY=y
>> # CONFIG_MEMSTICK_DEBUG is not set
>> # CONFIG_MEMSTICK is not set
>> CONFIG_MEMSTICK_JMICRON_38X=m
>> diff --git a/kernel-s390x.config b/kernel-s390x.config
>> index 870bed49..7f0886fc 100644
>> --- a/kernel-s390x.config
>> +++ b/kernel-s390x.config
>> @@ -653,7 +653,7 @@ CONFIG_CGROUPS=y
>> # CONFIG_CHARGER_RT9455 is not set
>> # CONFIG_CHARGER_SBS is not set
>> # CONFIG_CHARGER_SMB347 is not set
>> -# CONFIG_CHECKPOINT_RESTORE is not set
>> +CONFIG_CHECKPOINT_RESTORE=y
>> CONFIG_CHECK_STACK=y
>> CONFIG_CHELSIO_T1_1G=y
>> CONFIG_CHELSIO_T1=m
>> @@ -2552,6 +2552,7 @@ CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y
>> CONFIG_MEMORY_HOTPLUG=y
>> CONFIG_MEMORY_HOTREMOVE=y
>> # CONFIG_MEMORY is not set
>> +CONFIG_MEM_SOFT_DIRTY=y
>> # CONFIG_MEMSTICK_DEBUG is not set
>> # CONFIG_MEMSTICK is not set
>> CONFIG_MEMSTICK_JMICRON_38X=m
>> diff --git a/kernel.spec b/kernel.spec
>> index 9ece7387..4832501e 100644
>> --- a/kernel.spec
>> +++ b/kernel.spec
>> @@ -2195,6 +2195,9 @@ fi
>> #
>> #
>> %changelog
>> +* Fri Jul 28 2017 Adrian Reber <adrian(a)lisas.de>
>> +- Enable CHECKPOINT_RESTORE on s390x
>> +
>> * Fri Jul 28 2017 Laura Abbott <labbott(a)fedoraproject.org> -
4.13.0-0.rc2.git3.1
>> - Linux v4.13-rc2-110-g0b5477d9dabd
>>
>
> Thanks, applied to rawhide.
I think that not all parts of my patch have been applied. The following
part is not in git:
diff --git a/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
new file mode 100644
index 00000000..c554a09c
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_CHECKPOINT_RESTORE
@@ -0,0 +1 @@
+CONFIG_CHECKPOINT_RESTORE=y
diff --git a/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
new file mode 100644
index 00000000..356f2edd
--- /dev/null
+++ b/baseconfig/s390x/CONFIG_MEM_SOFT_DIRTY
@@ -0,0 +1 @@
+CONFIG_MEM_SOFT_DIRTY=y
Running ./build_configs.sh removes the CHECKPOINT_RESTORE option again
from the configs. The same happens also for CONFIG_AQTION. This is also
gone after running ./build_configs.sh.
Adrian
_______________________________________________
Thanks for pointing that out. Updated.
Thanks,
Laura
2471
days inactive
2474
days old
kernel@lists.fedoraproject.org
7 comments
3 participants
participants (3)
-
Adrian Reber -
Laura Abbott -
Peter Robinson