12:47 a.m.
kdumpctl, mkdumprd, *-module-setup.sh only target bash, since they
only run in first kernel and depend on dracut, and dracut depends
on bash. So use '[[ ]]' to replace '[ ]'.
This is a batch update done with following command:
`sed -i -e 's/\(\s\)\[\s\([^]]*\)\s\]/\1\[\[\ \2 \]\]/g' kdumpctl, mkdumprd,
*-module-setup.sh`
and replaced [ ... -a ... ] with [[ ... ]] && [[ ... ]] manually.
See https://tldp.org/LDP/abs/html/testconstructs.html for more details
on '[[ ]]', it's more versatile, safer, and slightly faster than '[
]'.
This will also help shfmt to clean up the code in later commits.
Signed-off-by: Kairui Song <kasong(a)redhat.com>
---
dracut-early-kdump-module-setup.sh | 10 +-
dracut-module-setup.sh | 108 +++++++-------
kdumpctl | 218 ++++++++++++++---------------
mkdumprd | 50 +++----
mkfadumprd | 2 +-
5 files changed, 194 insertions(+), 194 deletions(-)
diff --git a/dracut-early-kdump-module-setup.sh b/dracut-early-kdump-module-setup.sh
index b25d6b5f..00546e01 100755
--- a/dracut-early-kdump-module-setup.sh
+++ b/dracut-early-kdump-module-setup.sh
@@ -6,8 +6,8 @@ KDUMP_KERNEL=""
KDUMP_INITRD=""
check() {
- if [ ! -f /etc/sysconfig/kdump ] || [ ! -f /lib/kdump/kdump-lib.sh ]\
- || [ -n "${IN_KDUMP}" ]
+ if [[ ! -f /etc/sysconfig/kdump ]] || [[ ! -f /lib/kdump/kdump-lib.sh ]]\
+ || [[ -n "${IN_KDUMP}" ]]
then
return 1
fi
@@ -25,7 +25,7 @@ prepare_kernel_initrd() {
prepare_kdump_bootinfo
# $kernel is a variable from dracut
- if [ "$KDUMP_KERNELVER" != $kernel ]; then
+ if [[ "$KDUMP_KERNELVER" != $kernel ]]; then
dwarn "Using kernel version '$KDUMP_KERNELVER' for early
kdump," \
"but the initramfs is generated for kernel version
'$kernel'"
fi
@@ -33,12 +33,12 @@ prepare_kernel_initrd() {
install() {
prepare_kernel_initrd
- if [ ! -f "$KDUMP_KERNEL" ]; then
+ if [[ ! -f "$KDUMP_KERNEL" ]]; then
derror "Could not find required kernel for earlykdump," \
"earlykdump will not work!"
return 1
fi
- if [ ! -f "$KDUMP_INITRD" ]; then
+ if [[ ! -f "$KDUMP_INITRD" ]]; then
derror "Could not find required kdump initramfs for earlykdump," \
"please ensure kdump initramfs is generated first," \
"earlykdump will not work!"
diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh
index 80c14b26..521c9fdc 100755
--- a/dracut-module-setup.sh
+++ b/dracut-module-setup.sh
@@ -11,7 +11,7 @@ kdump_module_init() {
check() {
[[ $debug ]] && set -x
#kdumpctl sets this explicitly
- if [ -z "$IN_KDUMP" ] || [ ! -f /etc/kdump.conf ]
+ if [[ -z "$IN_KDUMP" ]] || [[ ! -f /etc/kdump.conf ]]
then
return 1
fi
@@ -41,11 +41,11 @@ depends() {
_dep="$_dep ssh-client"
fi
- if [ "$(uname -m)" = "s390x" ]; then
+ if [[ "$(uname -m)" = "s390x" ]]; then
_dep="$_dep znet"
fi
- if [ -n "$( ls -A /sys/class/drm 2>/dev/null )" ] || [ -d
/sys/module/hyperv_fb ]; then
+ if [[ -n "$( ls -A /sys/class/drm 2>/dev/null )" ]] || [[ -d
/sys/module/hyperv_fb ]]; then
add_opt_module drm
fi
@@ -57,19 +57,19 @@ depends() {
}
kdump_is_bridge() {
- [ -d /sys/class/net/"$1"/bridge ]
+ [[ -d /sys/class/net/"$1"/bridge ]]
}
kdump_is_bond() {
- [ -d /sys/class/net/"$1"/bonding ]
+ [[ -d /sys/class/net/"$1"/bonding ]]
}
kdump_is_team() {
- [ -f /usr/bin/teamnl ] && teamnl $1 ports &> /dev/null
+ [[ -f /usr/bin/teamnl ]] && teamnl $1 ports &> /dev/null
}
kdump_is_vlan() {
- [ -f /proc/net/vlan/"$1" ]
+ [[ -f /proc/net/vlan/"$1" ]]
}
# $1: netdev name
@@ -78,7 +78,7 @@ source_ifcfg_file() {
dwarning "Network Scripts are deprecated. You are encouraged to set up network
by NetworkManager."
ifcfg_file=$(get_ifcfg_filename $1)
- if [ -f "${ifcfg_file}" ]; then
+ if [[ -f "${ifcfg_file}" ]]; then
. ${ifcfg_file}
else
dwarning "The ifcfg file of $1 is not found!"
@@ -102,19 +102,19 @@ kdump_setup_dns() {
else
dwarning "Failed to get DNS info via nmcli output. Now try sourcing ifcfg
script"
source_ifcfg_file "$_netdev"
- [ -n "$DNS1" ] && echo "nameserver=$DNS1" >
"$_dnsfile"
- [ -n "$DNS2" ] && echo "nameserver=$DNS2" >>
"$_dnsfile"
+ [[ -n "$DNS1" ]] && echo "nameserver=$DNS1" >
"$_dnsfile"
+ [[ -n "$DNS2" ]] && echo "nameserver=$DNS2" >>
"$_dnsfile"
fi
while read -r content;
do
_nameserver=$(echo $content | grep ^nameserver)
- [ -z "$_nameserver" ] && continue
+ [[ -z "$_nameserver" ]] && continue
_dns=$(echo $_nameserver | cut -d' ' -f2)
- [ -z "$_dns" ] && continue
+ [[ -z "$_dns" ]] && continue
- if [ ! -f $_dnsfile ] || ! grep -q "$_dns" "$_dnsfile" ;
then
+ if [[ ! -f $_dnsfile ]] || ! grep -q "$_dns" "$_dnsfile" ;
then
echo "nameserver=$_dns" >> "$_dnsfile"
fi
done < "/etc/resolv.conf"
@@ -243,11 +243,11 @@ kdump_static_ip() {
_ipv6_flag="-6"
fi
- if [ -n "$_ipaddr" ]; then
+ if [[ -n "$_ipaddr" ]]; then
_gateway=$(ip $_ipv6_flag route list dev $_netdev | \
awk '/^default /{print $3}' | head -n 1)
- if [ "x" != "x"$_ipv6_flag ]; then
+ if [[ "x" != "x"$_ipv6_flag ]]; then
# _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after
"/"
_netmask=${_ipaddr#*\/}
_srcaddr="[$_srcaddr]"
@@ -268,7 +268,7 @@ kdump_static_ip() {
while read -r _route; do
_target=$(echo $_route | cut -d ' ' -f1)
_nexthop=$(echo $_route | cut -d ' ' -f3)
- if [ "x" != "x"$_ipv6_flag ]; then
+ if [[ "x" != "x"$_ipv6_flag ]]; then
_target="[$_target]"
_nexthop="[$_nexthop]"
fi
@@ -297,7 +297,7 @@ kdump_handle_mulitpath_route() {
if [[ "$_weight" -gt "$_max_weight" ]]; then
_nexthop=$(echo "$_route" | cut -d ' ' -f3)
_max_weight=$_weight
- if [ "x" != "x"$_ipv6_flag ]; then
+ if [[ "x" != "x"$_ipv6_flag ]]; then
_rule="rd.route=[$_target]:[$_nexthop]:$kdumpnic"
else
_rule="rd.route=$_target:$_nexthop:$kdumpnic"
@@ -322,7 +322,7 @@ kdump_get_mac_addr() {
#of its slaves, we should use perm address
kdump_get_perm_addr() {
local addr=$(ethtool -P $1 | sed -e 's/Permanent address: //')
- if [ -z "$addr" ] || [ "$addr" = "00:00:00:00:00:00" ]
+ if [[ -z "$addr" ]] || [[ "$addr" = "00:00:00:00:00:00"
]]
then
derror "Can't get the permanent address of $1"
else
@@ -419,7 +419,7 @@ kdump_setup_team() {
#Buggy version teamdctl outputs to stderr!
#Try to use the latest version of teamd.
teamdctl "$_netdev" config dump > ${initdir}/tmp/$$-$_netdev.conf
- if [ $? -ne 0 ]
+ if [[ $? -ne 0 ]]
then
derror "teamdctl failed."
exit 1
@@ -459,25 +459,25 @@ find_online_znet_device() {
local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices"
local NETWORK_DEVICES d ifname ONLINE
- [ ! -d "$CCWGROUPBUS_DEVICEDIR" ] && return
+ [[ ! -d "$CCWGROUPBUS_DEVICEDIR" ]] && return
NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR)
for d in $NETWORK_DEVICES
do
- [ ! -f "$d/online" ] && continue
+ [[ ! -f "$d/online" ]] && continue
read -r ONLINE < $d/online
- if [ $ONLINE -ne 1 ]; then
+ if [[ $ONLINE -ne 1 ]]; then
continue
fi
# determine interface name, if there (only for qeth and if
# device is online)
- if [ -f $d/if_name ]
+ if [[ -f $d/if_name ]]
then
read -r ifname < $d/if_name
- elif [ -d $d/net ]
+ elif [[ -d $d/net ]]
then
ifname=$(ls $d/net/)
fi
- [ -n "$ifname" ] && break
+ [[ -n "$ifname" ]] && break
done
echo -n "$ifname"
}
@@ -539,7 +539,7 @@ kdump_get_remote_ip()
local _remote=$(get_remote_host $1) _remote_temp
if is_hostname $_remote; then
_remote_temp=$(getent ahosts $_remote | grep -v : | head -n 1)
- if [ -z "$_remote_temp" ]; then
+ if [[ -z "$_remote_temp" ]]; then
_remote_temp=$(getent ahosts $_remote | head -n 1)
fi
_remote=$(echo $_remote_temp | cut -d' ' -f1)
@@ -574,7 +574,7 @@ kdump_install_net() {
fi
_static=$(kdump_static_ip $_netdev $_srcaddr $kdumpnic)
- if [ -n "$_static" ]; then
+ if [[ -n "$_static" ]]; then
_proto=none
elif is_ipv6_address $_srcaddr; then
_proto=auto6
@@ -589,7 +589,7 @@ kdump_install_net() {
# so we have to avoid adding duplicates
# We should also check /proc/cmdline for existing ip=xx arg.
# For example, iscsi boot will specify ip=xxx arg in cmdline.
- if [ ! -f $_ip_conf ] || ! grep -q $_ip_opts $_ip_conf &&\
+ if [[ ! -f $_ip_conf ]] || ! grep -q $_ip_opts $_ip_conf &&\
! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then
echo "$_ip_opts" >> $_ip_conf
fi
@@ -612,7 +612,7 @@ kdump_install_net() {
kdump_setup_dns "$_netdev" "$_nm_show_cmd"
- if [ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]; then
+ if [[ ! -f ${initdir}/etc/cmdline.d/50neednet.conf ]]; then
# network-manager module needs this parameter
echo "rd.neednet" >> ${initdir}/etc/cmdline.d/50neednet.conf
fi
@@ -624,8 +624,8 @@ kdump_install_net() {
# the default gate way for network dump, eth1 in the fence kdump path will
# call kdump_install_net again and we don't want eth1 to be the default
# gateway.
- if [ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ] &&
- [ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]; then
+ if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ]] &&
+ [[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]]; then
echo "kdumpnic=$kdumpnic" >
${initdir}/etc/cmdline.d/60kdumpnic.conf
echo "bootdev=$kdumpnic" > ${initdir}/etc/cmdline.d/70bootdev.conf
fi
@@ -633,21 +633,21 @@ kdump_install_net() {
# install etc/kdump/pre.d and /etc/kdump/post.d
kdump_install_pre_post_conf() {
- if [ -d /etc/kdump/pre.d ]; then
+ if [[ -d /etc/kdump/pre.d ]]; then
for file in /etc/kdump/pre.d/*; do
- if [ -x "$file" ]; then
+ if [[ -x "$file" ]]; then
dracut_install $file
- elif [ $file != "/etc/kdump/pre.d/*" ]; then
+ elif [[ $file != "/etc/kdump/pre.d/*" ]]; then
echo "$file is not executable"
fi
done
fi
- if [ -d /etc/kdump/post.d ]; then
+ if [[ -d /etc/kdump/post.d ]]; then
for file in /etc/kdump/post.d/*; do
- if [ -x "$file" ]; then
+ if [[ -x "$file" ]]; then
dracut_install $file
- elif [ $file != "/etc/kdump/post.d/*" ]; then
+ elif [[ $file != "/etc/kdump/post.d/*" ]]; then
echo "$file is not executable"
fi
done
@@ -676,7 +676,7 @@ default_dump_target_install_conf()
echo "$_fstype $_target" >> ${initdir}/tmp/$$-kdump.conf
# don't touch the path under root mount
- if [ "$_mntpoint" != "/" ]; then
+ if [[ "$_mntpoint" != "/" ]]; then
_save_path=${_save_path##"$_mntpoint"}
fi
@@ -757,10 +757,10 @@ kdump_get_iscsi_initiator() {
local _initiator
local initiator_conf="/etc/iscsi/initiatorname.iscsi"
- [ -f "$initiator_conf" ] || return 1
+ [[ -f "$initiator_conf" ]] || return 1
while read -r _initiator; do
- [ -z "${_initiator%%#*}" ] && continue # Skip comment lines
+ [[ -z "${_initiator%%#*}" ]] && continue # Skip comment lines
case $_initiator in
InitiatorName=*)
@@ -776,7 +776,7 @@ kdump_get_iscsi_initiator() {
# Figure out iBFT session according to session type
is_ibft() {
- [ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]
+ [[ "$(kdump_iscsi_get_rec_val $1 "node.discovery_type")" = fw ]]
}
kdump_setup_iscsi_device() {
@@ -809,18 +809,18 @@ kdump_setup_iscsi_device() {
# get and set username and password details
username=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.username")
- [ "$username" == "<empty>" ] &&
username=""
+ [[ "$username" == "<empty>" ]] &&
username=""
password=$(kdump_iscsi_get_rec_val ${path} "node.session.auth.password")
- [ "$password" == "<empty>" ] &&
password=""
+ [[ "$password" == "<empty>" ]] &&
password=""
username_in=$(kdump_iscsi_get_rec_val ${path}
"node.session.auth.username_in")
- [ -n "$username" ] && userpwd_str="$username:$password"
+ [[ -n "$username" ]] &&
userpwd_str="$username:$password"
# get and set incoming username and password details
- [ "$username_in" == "<empty>" ] &&
username_in=""
+ [[ "$username_in" == "<empty>" ]] &&
username_in=""
password_in=$(kdump_iscsi_get_rec_val ${path}
"node.session.auth.password_in")
- [ "$password_in" == "<empty>" ] &&
password_in=""
+ [[ "$password_in" == "<empty>" ]] &&
password_in=""
- [ -n "$username_in" ] &&
userpwd_in_str=":$username_in:$password_in"
+ [[ -n "$username_in" ]] &&
userpwd_in_str=":$username_in:$password_in"
kdump_install_net "$tgt_ipaddr"
@@ -843,7 +843,7 @@ kdump_setup_iscsi_device() {
# Setup initator
initiator_str=$(kdump_get_iscsi_initiator)
- [ $? -ne "0" ] && derror "Failed to get initiator name"
&& return 1
+ [[ $? -ne "0" ]] && derror "Failed to get initiator name"
&& return 1
# If initiator details do not exist already, append.
if ! grep -q "$initiator_str" $netroot_conf; then
@@ -884,7 +884,7 @@ get_alias() {
do
# in /etc/hosts, alias can come at the 2nd column
entries=$(grep $ip /etc/hosts | awk '{ $1=""; print $0 }')
- if [ $? -eq 0 ]; then
+ if [[ $? -eq 0 ]]; then
alias_set="$alias_set $entries"
fi
done
@@ -901,7 +901,7 @@ is_localhost() {
hostnames="$hostnames $shortnames $aliasname"
for name in ${hostnames}; do
- if [ "$name" == "$nodename" ]; then
+ if [[ "$name" == "$nodename" ]]; then
return 0
fi
done
@@ -934,7 +934,7 @@ get_pcs_fence_kdump_nodes() {
# retrieves fence_kdump args from config file
get_pcs_fence_kdump_args() {
- if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
+ if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
. $FENCE_KDUMP_CONFIG_FILE
echo $FENCE_KDUMP_OPTS
fi
@@ -972,7 +972,7 @@ kdump_configure_fence_kdump () {
echo "fence_kdump_nodes $nodes" >> ${kdump_cfg_file}
args=$(get_pcs_fence_kdump_args)
- if [ -n "$args" ]; then
+ if [[ -n "$args" ]]; then
echo "fence_kdump_args $args" >> ${kdump_cfg_file}
fi
@@ -998,7 +998,7 @@ kdump_install_random_seed() {
poolsize=$(</proc/sys/kernel/random/poolsize)
- if [ ! -d ${initdir}/var/lib/ ]; then
+ if [[ ! -d ${initdir}/var/lib/ ]]; then
mkdir -p ${initdir}/var/lib/
fi
@@ -1010,7 +1010,7 @@ kdump_install_systemd_conf() {
# Kdump turns out to require longer default systemd mount timeout
# than 1st kernel(90s by default), we use default 300s for kdump.
grep -r "^[[:space:]]*DefaultTimeoutStartSec="
${initdir}/etc/systemd/system.conf* &>/dev/null
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
mkdir -p ${initdir}/etc/systemd/system.conf.d
echo "[Manager]" > ${initdir}/etc/systemd/system.conf.d/kdump.conf
echo "DefaultTimeoutStartSec=300s" >>
${initdir}/etc/systemd/system.conf.d/kdump.conf
diff --git a/kdumpctl b/kdumpctl
index 17ac9301..aea40fbc 100755
--- a/kdumpctl
+++ b/kdumpctl
@@ -27,7 +27,7 @@ standard_kexec_args="-d -p"
# Some default values in case /etc/sysconfig/kdump doesn't include
KDUMP_COMMANDLINE_REMOVE="hugepages hugepagesz slub_debug"
-if [ -f /etc/sysconfig/kdump ]; then
+if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
@@ -38,7 +38,7 @@ fi
#initiate the kdump logger
dlog_init
-if [ $? -ne 0 ]; then
+if [[ $? -ne 0 ]]; then
echo "failed to initiate the kdump logger."
exit 1
fi
@@ -48,7 +48,7 @@ single_instance_lock()
local rc timeout=5
exec 9>/var/lock/kdump
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Create file lock failed"
exit 1
fi
@@ -56,7 +56,7 @@ single_instance_lock()
flock -n 9
rc=$?
- while [ $rc -ne 0 ]; do
+ while [[ $rc -ne 0 ]]; do
dinfo "Another app is currently holding the kdump lock; waiting for it to
exit..."
flock -w $timeout 9
rc=$?
@@ -81,7 +81,7 @@ save_core()
mkdir -p $coredir
ddebug "cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete"
cp --sparse=always /proc/vmcore $coredir/vmcore-incomplete
- if [ $? == 0 ]; then
+ if [[ $? == 0 ]]; then
mv $coredir/vmcore-incomplete $coredir/vmcore
dinfo "saved a vmcore to $coredir"
else
@@ -91,12 +91,12 @@ save_core()
# pass the dmesg to Abrt tool if exists, in order
# to collect the kernel oops message.
# https://fedorahosted.org/abrt/
- if [ -x /usr/bin/dumpoops ]; then
+ if [[ -x /usr/bin/dumpoops ]]; then
ddebug "makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg"
makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg >/dev/null 2>&1
ddebug "dumpoops -d $coredir/dmesg"
dumpoops -d $coredir/dmesg >/dev/null 2>&1
- if [ $? == 0 ]; then
+ if [[ $? == 0 ]]; then
dinfo "kernel oops has been collected by abrt tool"
fi
fi
@@ -122,7 +122,7 @@ rebuild_kdump_initrd()
{
ddebug "rebuild kdump initrd: $MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER"
$MKDUMPRD $TARGET_INITRD $KDUMP_KERNELVER
- if [ $? != 0 ]; then
+ if [[ $? != 0 ]]; then
derror "mkdumprd: failed to make kdump initrd"
return 1
fi
@@ -141,7 +141,7 @@ rebuild_initrd()
return 1
fi
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
rebuild_fadump_initrd
else
rebuild_kdump_initrd
@@ -154,7 +154,7 @@ rebuild_initrd()
check_exist()
{
for file in $1; do
- if [ ! -e "$file" ]; then
+ if [[ ! -e "$file" ]]; then
derror "Error: $file not found."
return 1
fi
@@ -165,7 +165,7 @@ check_exist()
check_executable()
{
for file in $1; do
- if [ ! -x "$file" ]; then
+ if [[ ! -x "$file" ]]; then
derror "Error: $file is not executable."
return 1
fi
@@ -176,16 +176,16 @@ backup_default_initrd()
{
ddebug "backup default initrd: $DEFAULT_INITRD"
- if [ ! -f "$DEFAULT_INITRD" ]; then
+ if [[ ! -f "$DEFAULT_INITRD" ]]; then
return
fi
- if [ ! -e $DEFAULT_INITRD_BAK ]; then
+ if [[ ! -e $DEFAULT_INITRD_BAK ]]; then
dinfo "Backing up $DEFAULT_INITRD before rebuild."
# save checksum to verify before restoring
sha1sum $DEFAULT_INITRD > $INITRD_CHECKSUM_LOCATION
cp $DEFAULT_INITRD $DEFAULT_INITRD_BAK
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
dwarn "WARNING: failed to backup $DEFAULT_INITRD."
rm -f $DEFAULT_INITRD_BAK
fi
@@ -196,17 +196,17 @@ restore_default_initrd()
{
ddebug "restore default initrd: $DEFAULT_INITRD"
- if [ ! -f "$DEFAULT_INITRD" ]; then
+ if [[ ! -f "$DEFAULT_INITRD" ]]; then
return
fi
# If a backup initrd exists, we must be switching back from
# fadump to kdump. Restore the original default initrd.
- if [ -f $DEFAULT_INITRD_BAK ] && [ -f $INITRD_CHECKSUM_LOCATION ]; then
+ if [[ -f $DEFAULT_INITRD_BAK ]] && [[ -f $INITRD_CHECKSUM_LOCATION ]]; then
# verify checksum before restoring
backup_checksum=$(sha1sum "$DEFAULT_INITRD_BAK" | awk '{ print $1
}')
default_checksum=$(awk '{ print $1 }' "$INITRD_CHECKSUM_LOCATION")
- if [ "$default_checksum" != "$backup_checksum" ]; then
+ if [[ "$default_checksum" != "$backup_checksum" ]]; then
dwarn "WARNING: checksum mismatch! Can't restore original initrd.."
else
rm -f $INITRD_CHECKSUM_LOCATION
@@ -226,7 +226,7 @@ check_config()
case "$config_opt" in
dracut_args)
if [[ $config_val == *--mount* ]]; then
- if [ $(echo $config_val | grep -o "\-\-mount" | wc -l) -ne 1 ]; then
+ if [[ $(echo $config_val | grep -o "\-\-mount" | wc -l) -ne 1 ]]; then
derror "Multiple mount targets specified in one
\"dracut_args\"."
return 1
fi
@@ -234,7 +234,7 @@ check_config()
fi
;;
raw)
- if [ -d "/proc/device-tree/ibm,opal/dump" ]; then
+ if [[ -d "/proc/device-tree/ibm,opal/dump" ]]; then
dwarn "WARNING: Won't capture opalcore when 'raw' dump target is
used."
fi
config_opt=_target
@@ -262,8 +262,8 @@ check_config()
return 1
fi
- if [ -n "${_opt_rec[$config_opt]}" ]; then
- if [ $config_opt == _target ]; then
+ if [[ -n "${_opt_rec[$config_opt]}" ]]; then
+ if [[ $config_opt == _target ]]; then
derror "More than one dump targets specified"
else
derror "Duplicated kdump config value of option $config_opt"
@@ -292,13 +292,13 @@ get_pcs_cluster_modified_files()
time_stamp=$(pcs cluster cib | xmllint --xpath 'string(/cib/@cib-last-written)'
- | xargs -0 date +%s --date)
- if [ -n $time_stamp -a $time_stamp -gt $image_time ]; then
+ if [[ -n $time_stamp ]] && [[ $time_stamp -gt $image_time ]]; then
modified_files="cluster-cib"
fi
- if [ -f $FENCE_KDUMP_CONFIG_FILE ]; then
+ if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then
time_stamp=$(stat -c "%Y" $FENCE_KDUMP_CONFIG_FILE)
- if [ "$time_stamp" -gt "$image_time" ]; then
+ if [[ "$time_stamp" -gt "$image_time" ]]; then
modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE"
fi
fi
@@ -309,13 +309,13 @@ get_pcs_cluster_modified_files()
setup_initrd()
{
prepare_kdump_bootinfo
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "failed to prepare for kdump bootinfo."
return 1
fi
DEFAULT_INITRD_BAK="$KDUMP_BOOTDIR/.$(basename $DEFAULT_INITRD).default"
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
TARGET_INITRD="$DEFAULT_INITRD"
# backup initrd for reference before replacing it
@@ -341,16 +341,16 @@ check_files_modified()
EXTRA_BINS=$(kdump_get_conf_val kdump_post)
CHECK_FILES=$(kdump_get_conf_val kdump_pre)
HOOKS="/etc/kdump/post.d/ /etc/kdump/pre.d/"
- if [ -d /etc/kdump/post.d ]; then
+ if [[ -d /etc/kdump/post.d ]]; then
for file in /etc/kdump/post.d/*; do
- if [ -x "$file" ]; then
+ if [[ -x "$file" ]]; then
POST_FILES="$POST_FILES $file"
fi
done
fi
- if [ -d /etc/kdump/pre.d ]; then
+ if [[ -d /etc/kdump/pre.d ]]; then
for file in /etc/kdump/pre.d/*; do
- if [ -x "$file" ]; then
+ if [[ -x "$file" ]]; then
PRE_FILES="$PRE_FILES $file"
fi
done
@@ -367,8 +367,8 @@ check_files_modified()
# Check for any updated extra module
EXTRA_MODULES="$(kdump_get_conf_val extra_modules)"
- if [ -n "$EXTRA_MODULES" ]; then
- if [ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]; then
+ if [[ -n "$EXTRA_MODULES" ]]; then
+ if [[ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]]; then
files="$files /lib/modules/$KDUMP_KERNELVER/modules.dep"
fi
for _module in $EXTRA_MODULES; do
@@ -390,18 +390,18 @@ check_files_modified()
# HOOKS is mandatory and need to check the modification time
files="$files $HOOKS"
check_exist "$files" && check_executable "$EXTRA_BINS"
- [ $? -ne 0 ] && return 2
+ [[ $? -ne 0 ]] && return 2
for file in $files; do
- if [ -e "$file" ]; then
+ if [[ -e "$file" ]]; then
time_stamp=$(stat -c "%Y" $file)
- if [ "$time_stamp" -gt "$image_time" ]; then
+ if [[ "$time_stamp" -gt "$image_time" ]]; then
modified_files="$modified_files $file"
fi
- if [ -L "$file" ]; then
+ if [[ -L "$file" ]]; then
file=$(readlink -m $file)
time_stamp=$(stat -c "%Y" $file)
- if [ "$time_stamp" -gt "$image_time" ]; then
+ if [[ "$time_stamp" -gt "$image_time" ]]; then
modified_files="$modified_files $file"
fi
fi
@@ -410,7 +410,7 @@ check_files_modified()
fi
done
- if [ -n "$modified_files" ]; then
+ if [[ -n "$modified_files" ]]; then
dinfo "Detected change(s) in the following file(s): $modified_files"
return 1
fi
@@ -441,7 +441,7 @@ check_drivers_modified()
# Include watchdog drivers if watchdog module is not omitted
is_dracut_mod_omitted watchdog || _new_drivers+=" $(get_watchdog_drvs)"
- [ -z "$_new_drivers" ] && return 0
+ [[ -z "$_new_drivers" ]] && return 0
if is_fadump_capable; then
_old_drivers="$(lsinitrd "$TARGET_INITRD" -f
/usr/lib/dracut/fadump-kernel-modules.txt | tr '\n' ' ')"
@@ -455,7 +455,7 @@ check_drivers_modified()
# Skip deprecated/invalid driver name or built-in module
_module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name $_driver
2>/dev/null)
_module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n $_driver
2>/dev/null)
- if [ $? -ne 0 ] || [ -z "$_module_name" ] || [[ "$_module_filename"
= *"(builtin)"* ]]; then
+ if [[ $? -ne 0 ]] || [[ -z "$_module_name" ]] || [[
"$_module_filename" = *"(builtin)"* ]]; then
continue
fi
if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then
@@ -491,7 +491,7 @@ check_fs_modified()
ddebug "_target=$_target _new_fstype=$_new_fstype"
_new_dev=$(kdump_get_persistent_dev $_target)
- if [ -z "$_new_dev" ]; then
+ if [[ -z "$_new_dev" ]]; then
perror "Get persistent device name failed"
return 2
fi
@@ -532,19 +532,19 @@ check_system_modified()
check_files_modified
ret=$?
- if [ $ret -ne 0 ]; then
+ if [[ $ret -ne 0 ]]; then
return $ret
fi
check_fs_modified
ret=$?
- if [ $ret -ne 0 ]; then
+ if [[ $ret -ne 0 ]]; then
return $ret
fi
check_drivers_modified
ret=$?
- if [ $ret -ne 0 ]; then
+ if [[ $ret -ne 0 ]]; then
return $ret
fi
@@ -559,20 +559,20 @@ check_rebuild()
setup_initrd
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
return 1
fi
force_no_rebuild=$(kdump_get_conf_val force_no_rebuild)
force_no_rebuild=${force_no_rebuild:-0}
- if [ "$force_no_rebuild" != "0" ] && [
"$force_no_rebuild" != "1" ];then
+ if [[ "$force_no_rebuild" != "0" ]] && [[
"$force_no_rebuild" != "1" ]];then
derror "Error: force_no_rebuild value is invalid"
return 1
fi
force_rebuild=$(kdump_get_conf_val force_rebuild)
force_rebuild=${force_rebuild:-0}
- if [ "$force_rebuild" != "0" ] && [
"$force_rebuild" != "1" ];then
+ if [[ "$force_rebuild" != "0" ]] && [[
"$force_rebuild" != "1" ]];then
derror "Error: force_rebuild value is invalid"
return 1
fi
@@ -583,37 +583,37 @@ check_rebuild()
fi
# Will not rebuild kdump initrd
- if [ "$force_no_rebuild" == "1" ]; then
+ if [[ "$force_no_rebuild" == "1" ]]; then
return 0
fi
#check to see if dependent files has been modified
#since last build of the image file
- if [ -f $TARGET_INITRD ]; then
+ if [[ -f $TARGET_INITRD ]]; then
image_time=$(stat -c "%Y" $TARGET_INITRD 2>/dev/null)
#in case of fadump mode, check whether the default/target
#initrd is already built with dump capture capability
- if [ "$DEFAULT_DUMP_MODE" == "fadump" ]; then
+ if [[ "$DEFAULT_DUMP_MODE" == "fadump" ]]; then
capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE "$TARGET_INITRD" |
grep -c -e ^kdumpbase$ -e ^zz-fadumpinit$)
fi
fi
check_system_modified
ret=$?
- if [ $ret -eq 2 ]; then
+ if [[ $ret -eq 2 ]]; then
return 1
- elif [ $ret -eq 1 ];then
+ elif [[ $ret -eq 1 ]];then
system_modified="1"
fi
- if [ $image_time -eq 0 ]; then
+ if [[ $image_time -eq 0 ]]; then
dinfo "No kdump initial ramdisk found."
- elif [ "$capture_capable_initrd" == "0" ]; then
+ elif [[ "$capture_capable_initrd" == "0" ]]; then
dinfo "Rebuild $TARGET_INITRD with dump capture support"
- elif [ "$force_rebuild" != "0" ]; then
+ elif [[ "$force_rebuild" != "0" ]]; then
dinfo "Force rebuild $TARGET_INITRD"
- elif [ "$system_modified" != "0" ]; then
+ elif [[ "$system_modified" != "0" ]]; then
:
else
return 0
@@ -633,7 +633,7 @@ function load_kdump_kernel_key()
# this is only required if DT /ibm,secure-boot is a file.
# if it is a dir, we are on OpenPower and don't need this.
- if ! [ -f /proc/device-tree/ibm,secure-boot ]; then
+ if ! [[ -f /proc/device-tree/ibm,secure-boot ]]; then
return
fi
@@ -645,7 +645,7 @@ function load_kdump_kernel_key()
# to be idempotent and so as to reduce the potential for confusion.
function remove_kdump_kernel_key()
{
- if [ -z "$KDUMP_KEY_ID" ]; then
+ if [[ -z "$KDUMP_KEY_ID" ]]; then
return
fi
@@ -692,7 +692,7 @@ load_kdump()
remove_kdump_kernel_key
- if [ $ret == 0 ]; then
+ if [[ $ret == 0 ]]; then
dinfo "kexec: loaded kdump kernel"
return 0
else
@@ -707,7 +707,7 @@ check_ssh_config()
case "$config_opt" in
sshkey)
# remove inline comments after the end of a directive.
- if [ -f "$config_val" ]; then
+ if [[ -f "$config_val" ]]; then
# canonicalize the path
SSH_KEY_LOCATION=$(/usr/bin/readlink -m $config_val)
else
@@ -727,7 +727,7 @@ check_ssh_config()
#make sure they've configured kdump.conf for ssh dumps
local SSH_TARGET=$(echo -n $DUMP_TARGET | sed -n '/.*@/p')
- if [ -z "$SSH_TARGET" ]; then
+ if [[ -z "$SSH_TARGET" ]]; then
return 1
fi
return 0
@@ -750,9 +750,9 @@ check_and_wait_network_ready()
retval=$?
# ssh exits with the exit status of the remote command or with 255 if an error
occurred
- if [ $retval -eq 0 ]; then
+ if [[ $retval -eq 0 ]]; then
return 0
- elif [ $retval -ne 255 ]; then
+ elif [[ $retval -ne 255 ]]; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you should check the privilege
on server side"
return 1
fi
@@ -760,12 +760,12 @@ check_and_wait_network_ready()
# if server removes the authorized_keys or, no /root/.ssh/kdump_id_rsa
ddebug "$errmsg"
echo $errmsg | grep -q "Permission denied\|No such file or directory\|Host key
verification failed" &> /dev/null
- if [ $? -eq 0 ]; then
+ if [[ $? -eq 0 ]]; then
derror "Could not create $DUMP_TARGET:$SAVE_PATH, you probably need to run
\"kdumpctl propagate\""
return 1
fi
- if [ $warn_once -eq 1 ]; then
+ if [[ $warn_once -eq 1 ]]; then
dwarn "Network dump target is not usable, waiting for it to be ready..."
warn_once=0
fi
@@ -773,7 +773,7 @@ check_and_wait_network_ready()
cur=$(date +%s)
diff=$((cur - start_time))
# 60s time out
- if [ $diff -gt 180 ]; then
+ if [[ $diff -gt 180 ]]; then
break;
fi
sleep 1
@@ -786,7 +786,7 @@ check_and_wait_network_ready()
check_ssh_target()
{
check_and_wait_network_ready
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
return 1
fi
return 0
@@ -795,7 +795,7 @@ check_ssh_target()
propagate_ssh_key()
{
check_ssh_config
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "No ssh config specified in $KDUMP_CONFIG_FILE. Can't propagate"
exit 1
fi
@@ -804,7 +804,7 @@ propagate_ssh_key()
local errmsg="Failed to propagate ssh key"
#Check to see if we already created key, if not, create it.
- if [ -f $KEYFILE ]; then
+ if [[ -f $KEYFILE ]]; then
dinfo "Using existing keys..."
else
dinfo "Generating new ssh keys... "
@@ -819,7 +819,7 @@ propagate_ssh_key()
#now send the found key to the found server
ssh-copy-id -i $KEYFILE $SSH_USER@$SSH_SERVER
RET=$?
- if [ $RET == 0 ]; then
+ if [[ $RET == 0 ]]; then
dinfo "$KEYFILE has been added to ~$SSH_USER/.ssh/authorized_keys on
$SSH_SERVER"
return 0
else
@@ -843,13 +843,13 @@ check_current_fadump_status()
{
# Check if firmware-assisted dump has been registered.
rc=$(<$FADUMP_REGISTER_SYS_NODE)
- [ $rc -eq 1 ] && return 0
+ [[ $rc -eq 1 ]] && return 0
return 1
}
check_current_status()
{
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
check_current_fadump_status
else
check_current_kdump_status
@@ -864,8 +864,8 @@ save_raw()
local raw_target
raw_target=$(kdump_get_conf_val raw)
- [ -z "$raw_target" ] && return 0
- [ -b "$raw_target" ] || {
+ [[ -z "$raw_target" ]] && return 0
+ [[ -b "$raw_target" ]] || {
derror "raw partition $raw_target not found"
return 1
}
@@ -875,14 +875,14 @@ save_raw()
return 0
fi
kdump_dir=$(kdump_get_conf_val path)
- if [ -z "${kdump_dir}" ]; then
+ if [[ -z "${kdump_dir}" ]]; then
coredir="/var/crash/$(date +"%Y-%m-%d-%H:%M")"
else
coredir="${kdump_dir}/$(date +"%Y-%m-%d-%H:%M")"
fi
mkdir -p "$coredir"
- [ -d "$coredir" ] || {
+ [[ -d "$coredir" ]] || {
derror "failed to create $coredir"
return 1
}
@@ -903,7 +903,7 @@ local_fs_dump_target()
local _target
_target=$(egrep "^ext[234]|^xfs|^btrfs|^minix" /etc/kdump.conf)
- if [ $? -eq 0 ]; then
+ if [[ $? -eq 0 ]]; then
echo $_target|awk '{print $2}'
fi
}
@@ -931,7 +931,7 @@ path_to_be_relabeled()
_path=$(get_save_path)
# if $_path is masked by other mount, we will not relabel it.
_rmnt=$(df $_mnt/$_path 2>/dev/null | tail -1 | awk '{ print $NF }')
- if [ "$_rmnt" == "$_mnt" ]; then
+ if [[ "$_rmnt" == "$_mnt" ]]; then
echo $_mnt/$_path
fi
}
@@ -941,13 +941,13 @@ selinux_relabel()
local _path _i _attr
_path=$(path_to_be_relabeled)
- if [ -z "$_path" ] || ! [ -d "$_path" ] ; then
+ if [[ -z "$_path" ]] || ! [[ -d "$_path" ]] ; then
return
fi
while read -r _i; do
_attr=$(getfattr -m "security.selinux" "$_i" 2>/dev/null)
- if [ -z "$_attr" ]; then
+ if [[ -z "$_attr" ]]; then
restorecon "$_i";
fi
done <<< "$(find "$_path")"
@@ -960,13 +960,13 @@ check_fence_kdump_config()
local nodes=$(kdump_get_conf_val "fence_kdump_nodes")
for node in $nodes; do
- if [ "$node" = "$hostname" ]; then
+ if [[ "$node" = "$hostname" ]]; then
derror "Option fence_kdump_nodes cannot contain $hostname"
return 1
fi
# node can be ipaddr
echo "$ipaddrs " | grep "$node " > /dev/null
- if [ $? -eq 0 ]; then
+ if [[ $? -eq 0 ]]; then
derror "Option fence_kdump_nodes cannot contain $node"
return 1
fi
@@ -977,7 +977,7 @@ check_fence_kdump_config()
check_dump_feasibility()
{
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
return 0
fi
@@ -999,7 +999,7 @@ start_fadump()
start_dump()
{
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
start_fadump
else
load_kdump
@@ -1017,14 +1017,14 @@ check_failure_action_config()
default_option=$(kdump_get_conf_val default)
failure_action=$(kdump_get_conf_val failure_action)
- if [ -z "$failure_action" -a -z "$default_option" ]; then
+ if [[ -z "$failure_action" ]] && [[ -z "$default_option" ]];
then
return 0
- elif [ -n "$failure_action" -a -n "$default_option" ]; then
+ elif [[ -n "$failure_action" ]] && [[ -n "$default_option"
]]; then
derror "Cannot specify 'failure_action' and 'default' option
together"
return 1
fi
- if [ -n "$default_option" ]; then
+ if [[ -n "$default_option" ]]; then
option="default"
failure_action="$default_option"
fi
@@ -1044,7 +1044,7 @@ check_final_action_config()
local final_action
final_action=$(kdump_get_conf_val final_action)
- if [ -z "$final_action" ]; then
+ if [[ -z "$final_action" ]]; then
return 0
else
case "$final_action" in
@@ -1061,13 +1061,13 @@ check_final_action_config()
start()
{
check_dump_feasibility
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
check_config
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
@@ -1077,13 +1077,13 @@ start()
fi
save_raw
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
check_current_status
- if [ $? == 0 ]; then
+ if [[ $? == 0 ]]; then
dwarn "Kdump already running: [WARNING]"
return 0
fi
@@ -1096,13 +1096,13 @@ start()
fi
check_rebuild
- if [ $? != 0 ]; then
+ if [[ $? != 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
start_dump
- if [ $? != 0 ]; then
+ if [[ $? != 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
@@ -1113,18 +1113,18 @@ start()
reload()
{
check_current_status
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
dwarn "Kdump was not running: [WARNING]"
fi
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
reload_fadump
return $?
else
stop_kdump
fi
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
@@ -1132,13 +1132,13 @@ reload()
dinfo "Stopping kdump: [OK]"
setup_initrd
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
start_dump
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
derror "Starting kdump: [FAILED]"
return 1
fi
@@ -1166,7 +1166,7 @@ stop_kdump()
$KEXEC -p -u
fi
- if [ $? != 0 ]; then
+ if [[ $? != 0 ]]; then
derror "kexec: failed to unload kdump kernel"
return 1
fi
@@ -1178,7 +1178,7 @@ stop_kdump()
reload_fadump()
{
echo 1 > $FADUMP_REGISTER_SYS_NODE
- if [ $? == 0 ]; then
+ if [[ $? == 0 ]]; then
dinfo "fadump: re-registered successfully"
return 0
else
@@ -1186,7 +1186,7 @@ reload_fadump()
# support is not enabled. Try stop/start from userspace
# to handle such scenario.
stop_fadump
- if [ $? == 0 ]; then
+ if [[ $? == 0 ]]; then
start_fadump
return $?
fi
@@ -1197,13 +1197,13 @@ reload_fadump()
stop()
{
- if [ $DEFAULT_DUMP_MODE == "fadump" ]; then
+ if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then
stop_fadump
else
stop_kdump
fi
- if [ $? != 0 ]; then
+ if [[ $? != 0 ]]; then
derror "Stopping kdump: [FAILED]"
return 1
fi
@@ -1214,7 +1214,7 @@ stop()
rebuild() {
check_config
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
return 1
fi
@@ -1225,7 +1225,7 @@ rebuild() {
fi
setup_initrd
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
return 1
fi
@@ -1242,7 +1242,7 @@ do_estimate() {
local size_mb=$(( 1024 * 1024 ))
setup_initrd
- if [ ! -f "$TARGET_INITRD" ]; then
+ if [[ ! -f "$TARGET_INITRD" ]]; then
derror "kdumpctl estimate: kdump initramfs is not built yet."
exit 1
fi
@@ -1359,7 +1359,7 @@ reset_crashkernel() {
fi
}
-if [ ! -f "$KDUMP_CONFIG_FILE" ]; then
+if [[ ! -f "$KDUMP_CONFIG_FILE" ]]; then
derror "Error: No kdump config file found!"
exit 1
fi
@@ -1371,7 +1371,7 @@ main ()
case "$1" in
start)
- if [ -s /proc/vmcore ]; then
+ if [[ -s /proc/vmcore ]]; then
save_core
reboot
else
diff --git a/mkdumprd b/mkdumprd
index 917fb0a7..7208666d 100644
--- a/mkdumprd
+++ b/mkdumprd
@@ -6,7 +6,7 @@
# Written by Cong Wang <amwang(a)redhat.com>
#
-if [ -f /etc/sysconfig/kdump ]; then
+if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
@@ -18,7 +18,7 @@ export IN_KDUMP=1
#initiate the kdump logger
dlog_init
-if [ $? -ne 0 ]; then
+if [[ $? -ne 0 ]]; then
echo "failed to initiate the kdump logger."
exit 1
fi
@@ -73,7 +73,7 @@ to_mount() {
else
# for non-nfs _target converting to use udev persistent name
_pdev="$(kdump_get_persistent_dev $_target)"
- if [ -z "$_pdev" ]; then
+ if [[ -z "$_pdev" ]]; then
return 1
fi
fi
@@ -116,14 +116,14 @@ mkdir_save_path_ssh()
_opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes"
ssh -qn $_opt $1 mkdir -p $SAVE_PATH 2>&1 > /dev/null
_ret=$?
- if [ $_ret -ne 0 ]; then
+ if [[ $_ret -ne 0 ]]; then
perror_exit "mkdir failed on $1:$SAVE_PATH"
fi
#check whether user has write permission on $1:$SAVE_PATH
_dir=$(ssh -qn $_opt $1 mktemp -dqp $SAVE_PATH 2>/dev/null)
_ret=$?
- if [ $_ret -ne 0 ]; then
+ if [[ $_ret -ne 0 ]]; then
perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make
sure user has write permission on destination"
fi
ssh -qn $_opt $1 rmdir $_dir
@@ -164,11 +164,11 @@ check_size() {
return
esac
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
perror_exit "Check dump target size failed"
fi
- if [ $avail -lt $memtotal ]; then
+ if [[ $avail -lt $memtotal ]]; then
dwarn "Warning: There might not be enough space to save a vmcore."
dwarn " The size of $2 should be greater than $memtotal kilo
bytes."
fi
@@ -178,7 +178,7 @@ check_save_path_fs()
{
local _path=$1
- if [ ! -d $_path ]; then
+ if [[ ! -d $_path ]]; then
perror_exit "Dump path $_path does not exist."
fi
}
@@ -190,7 +190,7 @@ mount_failure()
local _fstype=$3
local msg="Failed to mount $_target"
- if [ -n "$_mnt" ]; then
+ if [[ -n "$_mnt" ]]; then
msg="$msg on $_mnt"
fi
@@ -210,11 +210,11 @@ check_user_configured_target()
local _opt=$(get_mntopt_from_target $_target)
local _fstype=$(get_fs_type_from_target $_target)
- if [ -n "$_fstype" ]; then
+ if [[ -n "$_fstype" ]]; then
# In case of nfs4, nfs should be used instead, nfs* options is deprecated in
kdump.conf
[[ $_fstype = "nfs"* ]] && _fstype=nfs
- if [ -n "$_cfg_fs_type" ] && [ "$_fstype" !=
"$_cfg_fs_type" ]; then
+ if [[ -n "$_cfg_fs_type" ]] && [[ "$_fstype" !=
"$_cfg_fs_type" ]]; then
perror_exit "\"$_target\" have a wrong type config
\"$_cfg_fs_type\", expected \"$_fstype\""
fi
else
@@ -224,11 +224,11 @@ check_user_configured_target()
# For noauto mount, mount it inplace with default value.
# Else use the temporary target directory
- if [ -n "$_mnt" ]; then
+ if [[ -n "$_mnt" ]]; then
if ! is_mounted "$_mnt"; then
if [[ $_opt = *",noauto"* ]]; then
mount $_mnt
- [ $? -ne 0 ] && mount_failure "$_target"
"$_mnt" "$_fstype"
+ [[ $? -ne 0 ]] && mount_failure "$_target"
"$_mnt" "$_fstype"
_mounted=$_mnt
else
perror_exit "Dump target \"$_target\" is neither mounted
nor configured as \"noauto\""
@@ -238,19 +238,19 @@ check_user_configured_target()
_mnt=$MKDUMPRD_TMPMNT
mkdir -p $_mnt
mount $_target $_mnt -t $_fstype -o defaults
- [ $? -ne 0 ] && mount_failure "$_target" ""
"$_fstype"
+ [[ $? -ne 0 ]] && mount_failure "$_target" ""
"$_fstype"
_mounted=$_mnt
fi
# For user configured target, use $SAVE_PATH as the dump path within the target
- if [ ! -d "$_mnt/$SAVE_PATH" ]; then
+ if [[ ! -d "$_mnt/$SAVE_PATH" ]]; then
perror_exit "Dump path \"$_mnt/$SAVE_PATH\" does not exist in dump
target \"$_target\""
fi
check_size fs "$_target"
# Unmount it early, if function is interrupted and didn't reach here, the shell
trap will clear it up anyway
- if [ -n "$_mounted" ]; then
+ if [[ -n "$_mounted" ]]; then
umount -f -- $_mounted
fi
}
@@ -260,7 +260,7 @@ verify_core_collector() {
local _cmd="${1%% *}"
local _params="${1#* }"
- if [ "$_cmd" != "makedumpfile" ]; then
+ if [[ "$_cmd" != "makedumpfile" ]]; then
if is_raw_dump_target; then
dwarn "Warning: specifying a non-makedumpfile core collector, you will
have to recover the vmcore manually."
fi
@@ -284,7 +284,7 @@ verify_core_collector() {
add_mount() {
local _mnt=$(to_mount $@)
- if [ $? -ne 0 ]; then
+ if [[ $? -ne 0 ]]; then
exit 1
fi
@@ -316,7 +316,7 @@ for_each_block_target()
local dev majmin
for dev in $(get_kdump_targets); do
- [ -b "$dev" ] || continue
+ [[ -b "$dev" ]] || continue
majmin=$(get_maj_min $dev)
check_block_and_slaves $1 $majmin && return 1
done
@@ -331,10 +331,10 @@ is_unresettable()
local path="/sys/$(udevadm info --query=all --path=/sys/dev/block/$1 | awk
'/^P:/ {print $2}' | sed -e 's/\(cciss[0-9]\+\/\).*/\1/g' -e
's/\/block\/.*$//')/resettable"
local resettable=1
- if [ -f "$path" ]
+ if [[ -f "$path" ]]
then
resettable="$(<path)"
- [ $resettable -eq 0 -a "$OVERRIDE_RESETTABLE" -eq 0 ] && {
+ [[ $resettable -eq 0 ]] && [[ "$OVERRIDE_RESETTABLE" -eq 0 ]]
&& {
local device=$(udevadm info --query=all --path=/sys/dev/block/$1 | awk -F=
'/DEVNAME/{print $2}')
derror "Error: Can not save vmcore because device $device is
unresettable"
return 0
@@ -356,7 +356,7 @@ check_resettable()
for_each_block_target is_unresettable
_ret=$?
- [ $_ret -eq 0 ] && return
+ [[ $_ret -eq 0 ]] && return
return 1
}
@@ -382,7 +382,7 @@ fi
# firstly get right SSH_KEY_LOCATION
keyfile=$(kdump_get_conf_val sshkey)
-if [ -f "$keyfile" ]; then
+if [[ -f "$keyfile" ]]; then
# canonicalize the path
SSH_KEY_LOCATION=$(/usr/bin/readlink -m $keyfile)
fi
@@ -404,7 +404,7 @@ do
perror_exit "Bad raw disk $config_val"
}
_praw=$(persistent_policy="by-id" kdump_get_persistent_dev
$config_val)
- if [ -z "$_praw" ]; then
+ if [[ -z "$_praw" ]]; then
exit 1
fi
add_dracut_arg "--device" "$_praw"
@@ -435,7 +435,7 @@ done <<< "$(kdump_read_conf)"
handle_default_dump_target
-if [ -n "$extra_modules" ]
+if [[ -n "$extra_modules" ]]
then
add_dracut_arg "--add-drivers" "$extra_modules"
fi
diff --git a/mkfadumprd b/mkfadumprd
index 5c879338..ca9f362c 100644
--- a/mkfadumprd
+++ b/mkfadumprd
@@ -2,7 +2,7 @@
# Generate an initramfs image that isolates dump capture capability within
# the default initramfs using zz-fadumpinit dracut module.
-if [ -f /etc/sysconfig/kdump ]; then
+if [[ -f /etc/sysconfig/kdump ]]; then
. /etc/sysconfig/kdump
fi
--
2.31.1