[PATCH 29/47] bash scripts: reformat with shfmt

This is a batch update done with: shfmt -s -w mkfadumprd mkdumprd kdumpctl *-module-setup.sh Clean up code style and reduce code base size, no behaviour change. Signed-off-by: Kairui Song <kasong(a)redhat.com&gt; --- dracut-early-kdump-module-setup.sh | 11 +- dracut-module-setup.sh | 322 ++++++++--------- kdumpctl | 274 +++++++------- mkdumprd | 560 +++++++++++++++-------------- mkfadumprd | 8 +- 5 files changed, 593 insertions(+), 582 deletions(-) diff --git a/dracut-early-kdump-module-setup.sh b/dracut-early-kdump-module-setup.sh index 83e067c8..0e46823e 100755 --- a/dracut-early-kdump-module-setup.sh +++ b/dracut-early-kdump-module-setup.sh @@ -6,9 +6,8 @@ KDUMP_KERNEL="" KDUMP_INITRD="" check() { - if [[ ! -f /etc/sysconfig/kdump ]] || [[ ! -f /lib/kdump/kdump-lib.sh ]]\ - || [[ -n "${IN_KDUMP}" ]] - then + if [[ ! -f /etc/sysconfig/kdump ]] || [[ ! -f /lib/kdump/kdump-lib.sh ]] \ + || [[ -n ${IN_KDUMP} ]]; then return 1 fi return 255 @@ -25,7 +24,7 @@ prepare_kernel_initrd() { prepare_kdump_bootinfo # $kernel is a variable from dracut - if [[ "$KDUMP_KERNELVER" != "$kernel" ]]; then + if [[ $KDUMP_KERNELVER != "$kernel" ]]; then dwarn "Using kernel version '$KDUMP_KERNELVER' for early kdump," \ "but the initramfs is generated for kernel version '$kernel'" fi @@ -33,12 +32,12 @@ prepare_kernel_initrd() { install() { prepare_kernel_initrd - if [[ ! -f "$KDUMP_KERNEL" ]]; then + if [[ ! -f $KDUMP_KERNEL ]]; then derror "Could not find required kernel for earlykdump," \ "earlykdump will not work!" return 1 fi - if [[ ! -f "$KDUMP_INITRD" ]]; then + if [[ ! -f $KDUMP_INITRD ]]; then derror "Could not find required kdump initramfs for earlykdump," \ "please ensure kdump initramfs is generated first," \ "earlykdump will not work!" diff --git a/dracut-module-setup.sh b/dracut-module-setup.sh index be490c60..33ba915f 100755 --- a/dracut-module-setup.sh +++ b/dracut-module-setup.sh @@ -11,8 +11,7 @@ kdump_module_init() { check() { [[ $debug ]] && set -x #kdumpctl sets this explicitly - if [[ -z "$IN_KDUMP" ]] || [[ ! -f /etc/kdump.conf ]] - then + if [[ -z $IN_KDUMP ]] || [[ ! -f /etc/kdump.conf ]]; then return 1 fi return 0 @@ -41,11 +40,11 @@ depends() { _dep="$_dep ssh-client" fi - if [[ "$(uname -m)" = "s390x" ]]; then + if [[ "$(uname -m)" == "s390x" ]]; then _dep="$_dep znet" fi - if [[ -n "$( ls -A /sys/class/drm 2>/dev/null )" ]] || [[ -d /sys/module/hyperv_fb ]]; then + if [[ -n "$(ls -A /sys/class/drm 2> /dev/null)" ]] || [[ -d /sys/module/hyperv_fb ]]; then add_opt_module drm fi @@ -57,19 +56,19 @@ depends() { } kdump_is_bridge() { - [[ -d /sys/class/net/"$1"/bridge ]] + [[ -d /sys/class/net/"$1"/bridge ]] } kdump_is_bond() { - [[ -d /sys/class/net/"$1"/bonding ]] + [[ -d /sys/class/net/"$1"/bonding ]] } kdump_is_team() { - [[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null + [[ -f /usr/bin/teamnl ]] && teamnl "$1" ports &> /dev/null } kdump_is_vlan() { - [[ -f /proc/net/vlan/"$1" ]] + [[ -f /proc/net/vlan/"$1" ]] } # $1: netdev name @@ -78,7 +77,7 @@ source_ifcfg_file() { dwarning "Network Scripts are deprecated. You are encouraged to set up network by NetworkManager." ifcfg_file=$(get_ifcfg_filename "$1") - if [[ -f "${ifcfg_file}" ]]; then + if [[ -f ${ifcfg_file} ]]; then . "${ifcfg_file}" else dwarning "The ifcfg file of $1 is not found!" @@ -94,28 +93,26 @@ kdump_setup_dns() { _tmp=$(get_nmcli_value_by_field "$_nm_show_cmd" "IP4.DNS") # shellcheck disable=SC2206 - array=( ${_tmp//|/ } ) + array=(${_tmp//|/ }) if [[ ${array[*]} ]]; then - for _dns in "${array[@]}" - do + for _dns in "${array[@]}"; do echo "nameserver=$_dns" >> "$_dnsfile" done else dwarning "Failed to get DNS info via nmcli output. Now try sourcing ifcfg script" source_ifcfg_file "$_netdev" - [[ -n "$DNS1" ]] && echo "nameserver=$DNS1" > "$_dnsfile" - [[ -n "$DNS2" ]] && echo "nameserver=$DNS2" >> "$_dnsfile" + [[ -n $DNS1 ]] && echo "nameserver=$DNS1" > "$_dnsfile" + [[ -n $DNS2 ]] && echo "nameserver=$DNS2" >> "$_dnsfile" fi - while read -r content; - do + while read -r content; do _nameserver=$(echo "$content" | grep ^nameserver) - [[ -z "$_nameserver" ]] && continue + [[ -z $_nameserver ]] && continue _dns=$(echo "$_nameserver" | awk '{print $2}') - [[ -z "$_dns" ]] && continue + [[ -z $_dns ]] && continue - if [[ ! -f $_dnsfile ]] || ! grep -q "$_dns" "$_dnsfile" ; then + if [[ ! -f $_dnsfile ]] || ! grep -q "$_dns" "$_dnsfile"; then echo "nameserver=$_dns" >> "$_dnsfile" fi done < "/etc/resolv.conf" @@ -130,7 +127,7 @@ repeatedly_join_str() { local _separator="$3" local i _res - if [[ "$_count" -le 0 ]]; then + if [[ $_count -le 0 ]]; then echo -n "" return fi @@ -139,7 +136,7 @@ repeatedly_join_str() { _res="$_str" ((_count--)) - while [[ "$i" -lt "$_count" ]]; do + while [[ $i -lt $_count ]]; do ((i++)) _res="${_res}${_separator}${_str}" done @@ -160,14 +157,14 @@ cal_netmask_by_prefix() { local _count _res _octets_per_group _octets_total _seperator _total_groups local _max_group_value _max_group_value_repr _bits_per_group _tmp _zero_bits - if [[ "$_ipv6_flag" == "-6" ]]; then + if [[ $_ipv6_flag == "-6" ]]; then _ipv6=1 else _ipv6=0 fi - if [[ "$_prefix" -lt 0 || "$_prefix" -gt 128 ]] || \ - ( ((!_ipv6)) && [[ "$_prefix" -gt 32 ]] ); then + if [[ $_prefix -lt 0 || $_prefix -gt 128 ]] \ + || ( ((!_ipv6)) && [[ $_prefix -gt 32 ]]); then derror "Bad prefix:$_prefix for calculating netmask" exit 1 fi @@ -182,7 +179,7 @@ cal_netmask_by_prefix() { _seperator="." fi - _total_groups=$((_octets_total/_octets_per_group)) + _total_groups=$((_octets_total / _octets_per_group)) _bits_per_group=$((_octets_per_group * _bits_per_octet)) _max_group_value=$(((1 << _bits_per_group) - 1)) @@ -192,39 +189,39 @@ cal_netmask_by_prefix() { _max_group_value_repr="$_max_group_value" fi - _count=$((_prefix/_octets_per_group/_bits_per_octet)) + _count=$((_prefix / _octets_per_group / _bits_per_octet)) _first_part=$(repeatedly_join_str "$_count" "$_max_group_value_repr" "$_seperator") _res="$_first_part" - _tmp=$((_octets_total*_bits_per_octet-_prefix)) + _tmp=$((_octets_total * _bits_per_octet - _prefix)) _zero_bits=$((_tmp % _bits_per_group)) - if [[ "$_zero_bits" -ne 0 ]]; then + if [[ $_zero_bits -ne 0 ]]; then _second_part=$((_max_group_value >> _zero_bits << _zero_bits)) if ((_ipv6)); then _second_part=$(printf "%x" $_second_part) fi ((_count++)) - if [[ -z "$_first_part" ]]; then + if [[ -z $_first_part ]]; then _res="$_second_part" else _res="${_first_part}${_seperator}${_second_part}" fi fi - _count=$((_total_groups-_count)) - if [[ "$_count" -eq 0 ]]; then + _count=$((_total_groups - _count)) + if [[ $_count -eq 0 ]]; then echo -n "$_res" return fi - if ((_ipv6)) && [[ "$_count" -gt 1 ]] ; then + if ((_ipv6)) && [[ $_count -gt 1 ]]; then # use condensed notion for IPv6 _third_part=":" else _third_part=$(repeatedly_join_str "$_count" "0" "$_seperator") fi - if [[ -z "$_res" ]] && ((!_ipv6)) ; then + if [[ -z $_res ]] && ((!_ipv6)); then echo -n "${_third_part}" else echo -n "${_res}${_seperator}${_third_part}" @@ -244,11 +241,11 @@ kdump_static_ip() { _ipv6_flag="-6" fi - if [[ -n "$_ipaddr" ]]; then - _gateway=$(ip $_ipv6_flag route list dev "$_netdev" | \ - awk '/^default /{print $3}' | head -n 1) + if [[ -n $_ipaddr ]]; then + _gateway=$(ip $_ipv6_flag route list dev "$_netdev" \ + | awk '/^default /{print $3}' | head -n 1) - if [[ "x" != "x"$_ipv6_flag ]]; then + if [[ "x" != "x"$_ipv6_flag ]]; then # _ipaddr="2002::56ff:feb6:56d5/64", _netmask is the number after "/" _netmask=${_ipaddr#*\/} _srcaddr="[$_srcaddr]" @@ -263,17 +260,17 @@ kdump_static_ip() { echo -n "${_srcaddr}::${_gateway}:${_netmask}::" fi - /sbin/ip $_ipv6_flag route show | grep -v default |\ - grep ".*via.* $_netdev " | grep -v "^[[:space:]]*nexthop" |\ - while read -r _route; do - _target=$(echo "$_route" | awk '{print $1}') - _nexthop=$(echo "$_route" | awk '{print $3}') - if [[ "x" != "x"$_ipv6_flag ]]; then - _target="[$_target]" - _nexthop="[$_nexthop]" - fi - echo "rd.route=$_target:$_nexthop:$kdumpnic" - done >> "${initdir}/etc/cmdline.d/45route-static.conf" + /sbin/ip $_ipv6_flag route show | grep -v default \ + | grep ".*via.* $_netdev " | grep -v "^[[:space:]]*nexthop" \ + | while read -r _route; do + _target=$(echo "$_route" | awk '{print $1}') + _nexthop=$(echo "$_route" | awk '{print $3}') + if [[ "x" != "x"$_ipv6_flag ]]; then + _target="[$_target]" + _nexthop="[$_nexthop]" + fi + echo "rd.route=$_target:$_nexthop:$kdumpnic" + done >> "${initdir}/etc/cmdline.d/45route-static.conf" kdump_handle_mulitpath_route "$_netdev" "$_srcaddr" "$kdumpnic" } @@ -287,28 +284,28 @@ kdump_handle_mulitpath_route() { fi while IFS="" read -r _route; do - if [[ "$_route" =~ [[:space:]]+nexthop ]]; then + if [[ $_route =~ [[:space:]]+nexthop ]]; then _route=${_route##[[:space:]]} # Parse multipath route, using previous _target - [[ "$_target" == 'default' ]] && continue - [[ "$_route" =~ .*via.*\ $_netdev ]] || continue + [[ $_target == 'default' ]] && continue + [[ $_route =~ .*via.*\ $_netdev ]] || continue _weight=$(echo "$_route" | cut -d ' ' -f7) - if [[ "$_weight" -gt "$_max_weight" ]]; then + if [[ $_weight -gt $_max_weight ]]; then _nexthop=$(echo "$_route" | cut -d ' ' -f3) _max_weight=$_weight - if [[ "x" != "x"$_ipv6_flag ]]; then + if [[ "x" != "x"$_ipv6_flag ]]; then _rule="rd.route=[$_target]:[$_nexthop]:$kdumpnic" else _rule="rd.route=$_target:$_nexthop:$kdumpnic" fi fi else - [[ -n "$_rule" ]] && echo "$_rule" + [[ -n $_rule ]] && echo "$_rule" _target=$(echo "$_route" | cut -d ' ' -f1) _rule="" _max_weight=0 _weight=0 fi - done >> "${initdir}/etc/cmdline.d/45route-static.conf"\ + done >> "${initdir}/etc/cmdline.d/45route-static.conf" \ <<< "$(/sbin/ip $_ipv6_flag route show)" [[ -n $_rule ]] && echo "$_rule" >> "${initdir}/etc/cmdline.d/45route-static.conf" @@ -323,8 +320,7 @@ kdump_get_mac_addr() { kdump_get_perm_addr() { local addr addr=$(ethtool -P "$1" | sed -e 's/Permanent address: //') - if [[ -z "$addr" ]] || [[ "$addr" = "00:00:00:00:00:00" ]] - then + if [[ -z $addr ]] || [[ $addr == "00:00:00:00:00:00" ]]; then derror "Can't get the permanent address of $1" else echo "$addr" @@ -390,13 +386,13 @@ kdump_setup_bond() { _bondoptions=$(get_nmcli_value_by_field "$_nm_show_cmd" "bond.options") - if [[ -z "$_bondoptions" ]]; then + if [[ -z $_bondoptions ]]; then dwarning "Failed to get bond configuration via nmlci output. Now try sourcing ifcfg script." source_ifcfg_file "$_netdev" _bondoptions="$(echo "$BONDING_OPTS" | xargs echo | tr " " ",")" fi - if [[ -z "$_bondoptions" ]]; then + if [[ -z $_bondoptions ]]; then derror "Get empty bond options" exit 1 fi @@ -452,30 +448,27 @@ kdump_setup_vlan() { # code reaped from the list_configured function of # https://github.com/hreinecke/s390-tools/blob/master/zconf/znetconf find_online_znet_device() { - local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices" - local NETWORK_DEVICES d ifname ONLINE - - [[ ! -d "$CCWGROUPBUS_DEVICEDIR" ]] && return - NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR) - for d in $NETWORK_DEVICES - do - [[ ! -f "$d/online" ]] && continue - read -r ONLINE < "$d/online" - if [[ $ONLINE -ne 1 ]]; then - continue - fi - # determine interface name, if there (only for qeth and if - # device is online) - if [[ -f $d/if_name ]] - then - read -r ifname < "$d/if_name" - elif [[ -d $d/net ]] - then - ifname=$(ls "$d/net/") - fi - [[ -n "$ifname" ]] && break - done - echo -n "$ifname" + local CCWGROUPBUS_DEVICEDIR="/sys/bus/ccwgroup/devices" + local NETWORK_DEVICES d ifname ONLINE + + [[ ! -d $CCWGROUPBUS_DEVICEDIR ]] && return + NETWORK_DEVICES=$(find $CCWGROUPBUS_DEVICEDIR) + for d in $NETWORK_DEVICES; do + [[ ! -f "$d/online" ]] && continue + read -r ONLINE < "$d/online" + if [[ $ONLINE -ne 1 ]]; then + continue + fi + # determine interface name, if there (only for qeth and if + # device is online) + if [[ -f $d/if_name ]]; then + read -r ifname < "$d/if_name" + elif [[ -d $d/net ]]; then + ifname=$(ls "$d/net/") + fi + [[ -n $ifname ]] && break + done + echo -n "$ifname" } # setup s390 znet cmdline @@ -493,7 +486,7 @@ kdump_setup_znet() { SUBCHANNELS=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}subchannels") _options=$(get_nmcli_value_by_field "$_nmcli_cmd" "${s390_prefix}options") - if [[ -z "$NETTYPE" || -z "$SUBCHANNELS" || -z "$_options" ]]; then + if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then dwarning "Failed to get znet configuration via nmlci output. Now try sourcing ifcfg script." source_ifcfg_file "$_netdev" for i in $OPTIONS; do @@ -501,15 +494,14 @@ kdump_setup_znet() { done fi - if [[ -z "$NETTYPE" || -z "$SUBCHANNELS" || -z "$_options" ]]; then + if [[ -z $NETTYPE || -z $SUBCHANNELS || -z $_options ]]; then exit 1 fi echo "rd.znet=${NETTYPE},${SUBCHANNELS},${_options} rd.znet_ifname=$_netdev:${SUBCHANNELS}" > "${initdir}/etc/cmdline.d/30znet.conf" } -kdump_get_ip_route() -{ +kdump_get_ip_route() { local _route if ! _route=$(/sbin/ip -o route get to "$1" 2>&1); then derror "Bad kdump network destination: $1" @@ -518,11 +510,10 @@ kdump_get_ip_route() echo "$_route" } -kdump_get_ip_route_field() -{ +kdump_get_ip_route_field() { local _str=$1 - if [[ "$_str" == *" $2 "* ]]; then + if [[ $_str == *" $2 "* ]]; then _str="${_str##*$2 }" _str="${_str%% *}" fi @@ -530,13 +521,12 @@ kdump_get_ip_route_field() echo "$_str" } -kdump_get_remote_ip() -{ +kdump_get_remote_ip() { local _remote _remote_temp _remote=$(get_remote_host "$1") if is_hostname "$_remote"; then _remote_temp=$(getent ahosts "$_remote" | grep -v : | head -n 1) - if [[ -z "$_remote_temp" ]]; then + if [[ -z $_remote_temp ]]; then _remote_temp=$(getent ahosts "$_remote" | head -n 1) fi _remote=$(echo "$_remote_temp" | awk '{print $1}') @@ -561,7 +551,7 @@ kdump_install_net() { kdumpnic=$(kdump_setup_ifname "$_netdev") _znet_netdev=$(find_online_znet_device) - if [[ -n "$_znet_netdev" ]]; then + if [[ -n $_znet_netdev ]]; then _nm_show_cmd_znet=$(get_nmcli_connection_show_cmd_by_ifname "$_znet_netdev") if ! $(kdump_setup_znet "$_znet_netdev" "$_nm_show_cmd_znet"); then derror "Failed to set up znet" @@ -570,7 +560,7 @@ kdump_install_net() { fi _static=$(kdump_static_ip "$_netdev" "$_srcaddr" "$kdumpnic") - if [[ -n "$_static" ]]; then + if [[ -n $_static ]]; then _proto=none elif is_ipv6_address "$_srcaddr"; then _proto=auto6 @@ -585,8 +575,8 @@ kdump_install_net() { # so we have to avoid adding duplicates # We should also check /proc/cmdline for existing ip=xx arg. # For example, iscsi boot will specify ip=xxx arg in cmdline. - if [[ ! -f $_ip_conf ]] || ! grep -q "$_ip_opts" "$_ip_conf" &&\ - ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then + if [[ ! -f $_ip_conf ]] || ! grep -q "$_ip_opts" "$_ip_conf" \ + && ! grep -q "ip=[^[:space:]]*$_netdev" /proc/cmdline; then echo "$_ip_opts" >> "$_ip_conf" fi @@ -617,8 +607,8 @@ kdump_install_net() { # the default gate way for network dump, eth1 in the fence kdump path will # call kdump_install_net again and we don't want eth1 to be the default # gateway. - if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ]] && - [[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]]; then + if [[ ! -f ${initdir}/etc/cmdline.d/60kdumpnic.conf ]] \ + && [[ ! -f ${initdir}/etc/cmdline.d/70bootdev.conf ]]; then echo "kdumpnic=$kdumpnic" > "${initdir}/etc/cmdline.d/60kdumpnic.conf" echo "bootdev=$kdumpnic" > "${initdir}/etc/cmdline.d/70bootdev.conf" fi @@ -628,17 +618,17 @@ kdump_install_net() { kdump_install_pre_post_conf() { if [[ -d /etc/kdump/pre.d ]]; then for file in /etc/kdump/pre.d/*; do - if [[ -x "$file" ]]; then + if [[ -x $file ]]; then dracut_install "$file" elif [[ $file != "/etc/kdump/pre.d/*" ]]; then - echo "$file is not executable" + echo "$file is not executable" fi done fi if [[ -d /etc/kdump/post.d ]]; then for file in /etc/kdump/post.d/*; do - if [[ -x "$file" ]]; then + if [[ -x $file ]]; then dracut_install "$file" elif [[ $file != "/etc/kdump/post.d/*" ]]; then echo "$file is not executable" @@ -647,8 +637,7 @@ kdump_install_pre_post_conf() { fi } -default_dump_target_install_conf() -{ +default_dump_target_install_conf() { local _target _fstype local _mntpoint _save_path @@ -669,7 +658,7 @@ default_dump_target_install_conf() echo "$_fstype $_target" >> "${initdir}/tmp/$$-kdump.conf" # don't touch the path under root mount - if [[ "$_mntpoint" != "/" ]]; then + if [[ $_mntpoint != "/" ]]; then _save_path=${_save_path##"$_mntpoint"} fi @@ -684,32 +673,31 @@ kdump_install_conf() { kdump_read_conf > "${initdir}/tmp/$$-kdump.conf" - while read -r _opt _val; - do + while read -r _opt _val; do # remove inline comments after the end of a directive. case "$_opt" in - raw) - _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val") - sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" - ;; - ext[234]|xfs|btrfs|minix) - _pdev=$(kdump_get_persistent_dev "$_val") - sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" - ;; - ssh|nfs) - kdump_install_net "$_val" - ;; - dracut_args) - if [[ $(get_dracut_args_fstype "$_val") = nfs* ]] ; then - kdump_install_net "$(get_dracut_args_target "$_val")" - fi - ;; - kdump_pre|kdump_post|extra_bins) - dracut_install "$_val" - ;; - core_collector) - dracut_install "${_val%%[[:blank:]]*}" - ;; + raw) + _pdev=$(persistent_policy="by-id" kdump_get_persistent_dev "$_val") + sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" + ;; + ext[234] | xfs | btrfs | minix) + _pdev=$(kdump_get_persistent_dev "$_val") + sed -i -e "s#^${_opt}[[:space:]]\+$_val#$_opt $_pdev#" "${initdir}/tmp/$$-kdump.conf" + ;; + ssh | nfs) + kdump_install_net "$_val" + ;; + dracut_args) + if [[ $(get_dracut_args_fstype "$_val") == nfs* ]]; then + kdump_install_net "$(get_dracut_args_target "$_val")" + fi + ;; + kdump_pre | kdump_post | extra_bins) + dracut_install "$_val" + ;; + core_collector) + dracut_install "${_val%%[[:blank:]]*}" + ;; esac done <<< "$(kdump_read_conf)" @@ -717,7 +705,7 @@ kdump_install_conf() { default_dump_target_install_conf - kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf" + kdump_configure_fence_kdump "${initdir}/tmp/$$-kdump.conf" inst "${initdir}/tmp/$$-kdump.conf" "/etc/kdump.conf" rm -f "${initdir}/tmp/$$-kdump.conf" } @@ -750,16 +738,17 @@ kdump_get_iscsi_initiator() { local _initiator local initiator_conf="/etc/iscsi/initiatorname.iscsi" - [[ -f "$initiator_conf" ]] || return 1 + [[ -f $initiator_conf ]] || return 1 while read -r _initiator; do - [[ -z "${_initiator%%#*}" ]] && continue # Skip comment lines + [[ -z ${_initiator%%#*} ]] && continue # Skip comment lines case $_initiator in InitiatorName=*) initiator=${_initiator#InitiatorName=} echo "rd.iscsi.initiator=${initiator}" - return 0;; + return 0 + ;; *) ;; esac done < ${initiator_conf} @@ -769,15 +758,21 @@ kdump_get_iscsi_initiator() { # Figure out iBFT session according to session type is_ibft() { - [[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" = fw ]] + [[ "$(kdump_iscsi_get_rec_val "$1" "node.discovery_type")" == fw ]] } kdump_setup_iscsi_device() { local path=$1 - local tgt_name; local tgt_ipaddr; - local username; local password; local userpwd_str; - local username_in; local password_in; local userpwd_in_str; - local netroot_str ; local initiator_str; + local tgt_name + local tgt_ipaddr + local username + local password + local userpwd_str + local username_in + local password_in + local userpwd_in_str + local netroot_str + local initiator_str local netroot_conf="${initdir}/etc/cmdline.d/50iscsi.conf" local initiator_conf="/etc/iscsi/initiatorname.iscsi" @@ -785,7 +780,7 @@ kdump_setup_iscsi_device() { # Check once before getting explicit values, so we can bail out early, # e.g. in case of pure-hardware(all-offload) iscsi. - if ! /sbin/iscsiadm -m session -r "$path" &>/dev/null ; then + if ! /sbin/iscsiadm -m session -r "$path" &> /dev/null; then return 1 fi @@ -802,18 +797,18 @@ kdump_setup_iscsi_device() { # get and set username and password details username=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username") - [[ "$username" == "<empty>" ]] && username="" + [[ $username == "<empty>" ]] && username="" password=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password") - [[ "$password" == "<empty>" ]] && password="" + [[ $password == "<empty>" ]] && password="" username_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.username_in") - [[ -n "$username" ]] && userpwd_str="$username:$password" + [[ -n $username ]] && userpwd_str="$username:$password" # get and set incoming username and password details - [[ "$username_in" == "<empty>" ]] && username_in="" + [[ $username_in == "<empty>" ]] && username_in="" password_in=$(kdump_iscsi_get_rec_val "$path" "node.session.auth.password_in") - [[ "$password_in" == "<empty>" ]] && password_in="" + [[ $password_in == "<empty>" ]] && password_in="" - [[ -n "$username_in" ]] && userpwd_in_str=":$username_in:$password_in" + [[ -n $username_in ]] && userpwd_in_str=":$username_in:$password_in" kdump_install_net "$tgt_ipaddr" @@ -830,8 +825,8 @@ kdump_setup_iscsi_device() { # If netroot target does not exist already, append. if ! grep -q "$netroot_str" "$netroot_conf"; then - echo "$netroot_str" >> "$netroot_conf" - dinfo "Appended $netroot_str to $netroot_conf" + echo "$netroot_str" >> "$netroot_conf" + dinfo "Appended $netroot_str to $netroot_conf" fi # Setup initator @@ -842,14 +837,14 @@ kdump_setup_iscsi_device() { # If initiator details do not exist already, append. if ! grep -q "$initiator_str" "$netroot_conf"; then - echo "$initiator_str" >> "$netroot_conf" - dinfo "Appended $initiator_str to $netroot_conf" + echo "$initiator_str" >> "$netroot_conf" + dinfo "Appended $initiator_str to $netroot_conf" fi } -kdump_check_iscsi_targets () { +kdump_check_iscsi_targets() { # If our prerequisites are not met, fail anyways. - type -P iscsistart >/dev/null || return 1 + type -P iscsistart > /dev/null || return 1 kdump_check_setup_iscsi() ( local _dev @@ -875,12 +870,11 @@ get_alias() { local alias_set ips=$(hostname -I) - for ip in $ips - do - # in /etc/hosts, alias can come at the 2nd column - if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then - alias_set="$alias_set $entries" - fi + for ip in $ips; do + # in /etc/hosts, alias can come at the 2nd column + if entries=$(grep "$ip" /etc/hosts | awk '{ $1=""; print $0 }'); then + alias_set="$alias_set $entries" + fi done echo "$alias_set" @@ -898,7 +892,7 @@ is_localhost() { hostnames="$hostnames $shortnames $aliasname" for name in ${hostnames}; do - if [[ "$name" == "$nodename" ]]; then + if [[ $name == "$nodename" ]]; then return 0 fi done @@ -954,7 +948,7 @@ get_generic_fence_kdump_nodes() { # setup fence_kdump in cluster # setup proper network and install needed files -kdump_configure_fence_kdump () { +kdump_configure_fence_kdump() { local kdump_cfg_file=$1 local nodes local args @@ -969,7 +963,7 @@ kdump_configure_fence_kdump () { echo "fence_kdump_nodes $nodes" >> "${kdump_cfg_file}" args=$(get_pcs_fence_kdump_args) - if [[ -n "$args" ]]; then + if [[ -n $args ]]; then echo "fence_kdump_args $args" >> "${kdump_cfg_file}" fi @@ -993,14 +987,14 @@ kdump_configure_fence_kdump () { kdump_install_random_seed() { local poolsize - poolsize=$(</proc/sys/kernel/random/poolsize) + poolsize=$(< /proc/sys/kernel/random/poolsize) if [[ ! -d "${initdir}/var/lib/" ]]; then mkdir -p "${initdir}/var/lib/" fi dd if=/dev/urandom of="${initdir}/var/lib/random-seed" \ - bs="$poolsize" count=1 2> /dev/null + bs="$poolsize" count=1 2> /dev/null } kdump_install_systemd_conf() { @@ -1077,8 +1071,8 @@ install() { # it unconditionally here, if "/etc/lvm/lvm.conf" doesn't exist, it # actually does nothing. sed -i -e \ - 's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \ - "${initdir}/etc/lvm/lvm.conf" &>/dev/null + 's/\(^[[:space:]]*reserved_memory[[:space:]]*=\)[[:space:]]*[[:digit:]]*/\1 1024/' \ + "${initdir}/etc/lvm/lvm.conf" &> /dev/null # Save more memory by dropping switch root capability dracut_no_switch_root diff --git a/kdumpctl b/kdumpctl index 617ebcbc..9b3ed001 100755 --- a/kdumpctl +++ b/kdumpctl @@ -46,7 +46,7 @@ single_instance_lock() { local rc timeout=5 - if ! exec 9>/var/lock/kdump; then + if ! exec 9> /var/lock/kdump; then derror "Create file lock failed" exit 1 fi @@ -90,9 +90,9 @@ save_core() # https://fedorahosted.org/abrt/ if [[ -x /usr/bin/dumpoops ]]; then ddebug "makedumpfile --dump-dmesg $coredir/vmcore $coredir/dmesg" - makedumpfile --dump-dmesg "$coredir/vmcore" "$coredir/dmesg" >/dev/null 2>&1 + makedumpfile --dump-dmesg "$coredir/vmcore" "$coredir/dmesg" > /dev/null 2>&1 ddebug "dumpoops -d $coredir/dmesg" - if dumpoops -d "$coredir/dmesg" >/dev/null 2>&1; then + if dumpoops -d "$coredir/dmesg" > /dev/null 2>&1; then dinfo "kernel oops has been collected by abrt tool" fi fi @@ -131,7 +131,7 @@ rebuild_kdump_initrd() rebuild_initrd() { - if [[ ! -w $(dirname "$TARGET_INITRD") ]];then + if [[ ! -w $(dirname "$TARGET_INITRD") ]]; then derror "$(dirname "$TARGET_INITRD") does not have write permission. Cannot rebuild $TARGET_INITRD" return 1 fi @@ -149,7 +149,7 @@ rebuild_initrd() check_exist() { for file in $1; do - if [[ ! -e "$file" ]]; then + if [[ ! -e $file ]]; then derror "Error: $file not found." return 1 fi @@ -160,7 +160,7 @@ check_exist() check_executable() { for file in $1; do - if [[ ! -x "$file" ]]; then + if [[ ! -x $file ]]; then derror "Error: $file is not executable." return 1 fi @@ -171,7 +171,7 @@ backup_default_initrd() { ddebug "backup default initrd: $DEFAULT_INITRD" - if [[ ! -f "$DEFAULT_INITRD" ]]; then + if [[ ! -f $DEFAULT_INITRD ]]; then return fi @@ -190,7 +190,7 @@ restore_default_initrd() { ddebug "restore default initrd: $DEFAULT_INITRD" - if [[ ! -f "$DEFAULT_INITRD" ]]; then + if [[ ! -f $DEFAULT_INITRD ]]; then return fi @@ -200,7 +200,7 @@ restore_default_initrd() # verify checksum before restoring backup_checksum=$(sha1sum "$DEFAULT_INITRD_BAK" | awk '{ print $1 }') default_checksum=$(awk '{ print $1 }' "$INITRD_CHECKSUM_LOCATION") - if [[ "$default_checksum" != "$backup_checksum" ]]; then + if [[ $default_checksum != "$backup_checksum" ]]; then dwarn "WARNING: checksum mismatch! Can't restore original initrd.." else rm -f $INITRD_CHECKSUM_LOCATION @@ -220,7 +220,7 @@ check_config() dracut_args) if [[ $config_val == *--mount* ]]; then if [[ $(echo "$config_val" | grep -o "\-\-mount" | wc -l) -ne 1 ]]; then - derror "Multiple mount targets specified in one \"dracut_args\"." + derror 'Multiple mount targets specified in one "dracut_args".' return 1 fi config_opt=_target @@ -232,12 +232,12 @@ check_config() fi config_opt=_target ;; - ext[234]|minix|btrfs|xfs|nfs|ssh) + ext[234] | minix | btrfs | xfs | nfs | ssh) config_opt=_target ;; - sshkey|path|core_collector|kdump_post|kdump_pre|extra_bins|extra_modules|failure_action|default|final_action|force_rebuild|force_no_rebuild|fence_kdump_args|fence_kdump_nodes) - ;; - net|options|link_delay|disk_timeout|debug_mem_level|blacklist) + sshkey | path | core_collector | kdump_post | kdump_pre | extra_bins | extra_modules | failure_action | default | final_action | force_rebuild | force_no_rebuild | fence_kdump_args | fence_kdump_nodes) ;; + + net | options | link_delay | disk_timeout | debug_mem_level | blacklist) derror "Deprecated kdump config option: $config_opt. Refer to kdump.conf manpage for alternatives." return 1 ;; @@ -250,12 +250,12 @@ check_config() ;; esac - if [[ -z "$config_val" ]]; then + if [[ -z $config_val ]]; then derror "Invalid kdump config value for option '$config_opt'" return 1 fi - if [[ -n "${_opt_rec[$config_opt]}" ]]; then + if [[ -n ${_opt_rec[$config_opt]} ]]; then if [[ $config_opt == _target ]]; then derror "More than one dump targets specified" else @@ -291,7 +291,7 @@ get_pcs_cluster_modified_files() if [[ -f $FENCE_KDUMP_CONFIG_FILE ]]; then time_stamp=$(stat -c "%Y" "$FENCE_KDUMP_CONFIG_FILE") - if [[ "$time_stamp" -gt "$image_time" ]]; then + if [[ $time_stamp -gt $image_time ]]; then modified_files="$modified_files $FENCE_KDUMP_CONFIG_FILE" fi fi @@ -335,14 +335,14 @@ check_files_modified() HOOKS="/etc/kdump/post.d/ /etc/kdump/pre.d/" if [[ -d /etc/kdump/post.d ]]; then for file in /etc/kdump/post.d/*; do - if [[ -x "$file" ]]; then + if [[ -x $file ]]; then POST_FILES="$POST_FILES $file" fi done fi if [[ -d /etc/kdump/pre.d ]]; then for file in /etc/kdump/pre.d/*; do - if [[ -x "$file" ]]; then + if [[ -x $file ]]; then PRE_FILES="$PRE_FILES $file" fi done @@ -359,19 +359,19 @@ check_files_modified() # Check for any updated extra module EXTRA_MODULES="$(kdump_get_conf_val extra_modules)" - if [[ -n "$EXTRA_MODULES" ]]; then + if [[ -n $EXTRA_MODULES ]]; then if [[ -e /lib/modules/$KDUMP_KERNELVER/modules.dep ]]; then files="$files /lib/modules/$KDUMP_KERNELVER/modules.dep" fi for _module in $EXTRA_MODULES; do - if _module_file="$(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_module" 2>/dev/null)"; then + if _module_file="$(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_module" 2> /dev/null)"; then files="$files $_module_file" for _dep_modules in $(modinfo -F depends "$_module" | tr ',' ' '); do - files="$files $(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_dep_modules" 2>/dev/null)" + files="$files $(modinfo --set-version "$KDUMP_KERNELVER" --filename "$_dep_modules" 2> /dev/null)" done else # If it's not a module nor builtin, give an error - if ! ( modprobe --set-version "$KDUMP_KERNELVER" --dry-run "$_module" &>/dev/null ); then + if ! (modprobe --set-version "$KDUMP_KERNELVER" --dry-run "$_module" &> /dev/null); then dwarn "Module $_module not found" fi fi @@ -383,15 +383,15 @@ check_files_modified() check_exist "$files" && check_executable "$EXTRA_BINS" || return 2 for file in $files; do - if [[ -e "$file" ]]; then + if [[ -e $file ]]; then time_stamp=$(stat -c "%Y" "$file") - if [[ "$time_stamp" -gt "$image_time" ]]; then + if [[ $time_stamp -gt $image_time ]]; then modified_files="$modified_files $file" fi - if [[ -L "$file" ]]; then + if [[ -L $file ]]; then file=$(readlink -m "$file") time_stamp=$(stat -c "%Y" "$file") - if [[ "$time_stamp" -gt "$image_time" ]]; then + if [[ $time_stamp -gt $image_time ]]; then modified_files="$modified_files $file" fi fi @@ -400,7 +400,7 @@ check_files_modified() fi done - if [[ -n "$modified_files" ]]; then + if [[ -n $modified_files ]]; then dinfo "Detected change(s) in the following file(s): $modified_files" return 1 fi @@ -414,8 +414,9 @@ check_drivers_modified() # If it's dump target is on block device, detect the block driver _target=$(get_block_dump_target) - if [[ -n "$_target" ]]; then - _record_block_drivers() { + if [[ -n $_target ]]; then + _record_block_drivers() + { local _drivers _drivers=$(udevadm info -a "/dev/block/$1" | sed -n 's/\s*DRIVERS=="\(\S\+\)"/\1/p') for _driver in $_drivers; do @@ -431,7 +432,7 @@ check_drivers_modified() # Include watchdog drivers if watchdog module is not omitted is_dracut_mod_omitted watchdog || _new_drivers+=" $(get_watchdog_drvs)" - [[ -z "$_new_drivers" ]] && return 0 + [[ -z $_new_drivers ]] && return 0 if is_fadump_capable; then _old_drivers="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/fadump-kernel-modules.txt | tr '\n' ' ')" @@ -443,9 +444,9 @@ check_drivers_modified() ddebug "Modules included in old initramfs: '$_old_drivers'" for _driver in $_new_drivers; do # Skip deprecated/invalid driver name or built-in module - _module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name "$_driver" 2>/dev/null) - _module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n "$_driver" 2>/dev/null) - if [[ -z "$_module_name" ]] || [[ -z "$_module_filename" ]] || [[ "$_module_filename" = *"(builtin)"* ]]; then + _module_name=$(modinfo --set-version "$KDUMP_KERNELVER" -F name "$_driver" 2> /dev/null) + _module_filename=$(modinfo --set-version "$KDUMP_KERNELVER" -n "$_driver" 2> /dev/null) + if [[ -z $_module_name ]] || [[ -z $_module_filename ]] || [[ $_module_filename == *"(builtin)"* ]]; then continue fi if ! [[ " $_old_drivers " == *" $_module_name "* ]]; then @@ -474,21 +475,21 @@ check_fs_modified() _target=$(get_block_dump_target) _new_fstype=$(get_fs_type_from_target "$_target") - if [[ -z "$_target" ]] || [[ -z "$_new_fstype" ]];then + if [[ -z $_target ]] || [[ -z $_new_fstype ]]; then derror "Dump target is invalid" return 2 fi ddebug "_target=$_target _new_fstype=$_new_fstype" _new_dev=$(kdump_get_persistent_dev "$_target") - if [[ -z "$_new_dev" ]]; then + if [[ -z $_new_dev ]]; then perror "Get persistent device name failed" return 2 fi _new_mntpoint="$(get_kdump_mntpoint_from_target "$_target")" _dracut_args=$(lsinitrd "$TARGET_INITRD" -f usr/lib/dracut/build-parameter.txt) - if [[ -z "$_dracut_args" ]];then + if [[ -z $_dracut_args ]]; then dwarn "Warning: No dracut arguments found in initrd" return 0 fi @@ -501,10 +502,10 @@ check_fs_modified() _old_dev=$1 _old_mntpoint=$2 _old_fstype=$3 - [[ $_new_dev = "$_old_dev" && $_new_mntpoint = "$_old_mntpoint" && $_new_fstype = "$_old_fstype" ]] && return 0 + [[ $_new_dev == "$_old_dev" && $_new_mntpoint == "$_old_mntpoint" && $_new_fstype == "$_old_fstype" ]] && return 0 # otherwise rebuild if target device is not a root device else - [[ "$_target" = "$(get_root_fs_device)" ]] && return 0 + [[ $_target == "$(get_root_fs_device)" ]] && return 0 fi dinfo "Detected change in File System" @@ -551,36 +552,36 @@ check_rebuild() force_no_rebuild=$(kdump_get_conf_val force_no_rebuild) force_no_rebuild=${force_no_rebuild:-0} - if [[ "$force_no_rebuild" != "0" ]] && [[ "$force_no_rebuild" != "1" ]];then + if [[ $force_no_rebuild != "0" ]] && [[ $force_no_rebuild != "1" ]]; then derror "Error: force_no_rebuild value is invalid" return 1 fi force_rebuild=$(kdump_get_conf_val force_rebuild) force_rebuild=${force_rebuild:-0} - if [[ "$force_rebuild" != "0" ]] && [[ "$force_rebuild" != "1" ]];then + if [[ $force_rebuild != "0" ]] && [[ $force_rebuild != "1" ]]; then derror "Error: force_rebuild value is invalid" return 1 fi - if [[ "$force_no_rebuild" == "1" && "$force_rebuild" == "1" ]]; then + if [[ $force_no_rebuild == "1" && $force_rebuild == "1" ]]; then derror "Error: force_rebuild and force_no_rebuild are enabled simultaneously in kdump.conf" return 1 fi # Will not rebuild kdump initrd - if [[ "$force_no_rebuild" == "1" ]]; then + if [[ $force_no_rebuild == "1" ]]; then return 0 fi #check to see if dependent files has been modified #since last build of the image file if [[ -f $TARGET_INITRD ]]; then - image_time=$(stat -c "%Y" "$TARGET_INITRD" 2>/dev/null) + image_time=$(stat -c "%Y" "$TARGET_INITRD" 2> /dev/null) #in case of fadump mode, check whether the default/target #initrd is already built with dump capture capability - if [[ "$DEFAULT_DUMP_MODE" == "fadump" ]]; then + if [[ $DEFAULT_DUMP_MODE == "fadump" ]]; then capture_capable_initrd=$(lsinitrd -f $DRACUT_MODULES_FILE "$TARGET_INITRD" | grep -c -e ^kdumpbase$ -e ^zz-fadumpinit$) fi fi @@ -589,17 +590,17 @@ check_rebuild() ret=$? if [[ $ret -eq 2 ]]; then return 1 - elif [[ $ret -eq 1 ]];then + elif [[ $ret -eq 1 ]]; then system_modified="1" fi if [[ $image_time -eq 0 ]]; then dinfo "No kdump initial ramdisk found." - elif [[ "$capture_capable_initrd" == "0" ]]; then + elif [[ $capture_capable_initrd == "0" ]]; then dinfo "Rebuild $TARGET_INITRD with dump capture support" - elif [[ "$force_rebuild" != "0" ]]; then + elif [[ $force_rebuild != "0" ]]; then dinfo "Force rebuild $TARGET_INITRD" - elif [[ "$system_modified" != "0" ]]; then + elif [[ $system_modified != "0" ]]; then : else return 0 @@ -617,13 +618,13 @@ function load_kdump_kernel_key() # this is only called inside is_secure_boot_enforced, # no need to retest - # this is only required if DT /ibm,secure-boot is a file. - # if it is a dir, we are on OpenPower and don't need this. - if ! [[ -f /proc/device-tree/ibm,secure-boot ]]; then - return - fi + # this is only required if DT /ibm,secure-boot is a file. + # if it is a dir, we are on OpenPower and don't need this. + if ! [[ -f /proc/device-tree/ibm,secure-boot ]]; then + return + fi - KDUMP_KEY_ID=$(keyctl padd asymmetric kernelkey-$RANDOM %:.ima < "/usr/share/doc/kernel-keys/$KDUMP_KERNELVER/kernel-signing-ppc.cer") + KDUMP_KEY_ID=$(keyctl padd asymmetric kernelkey-$RANDOM %:.ima < "/usr/share/doc/kernel-keys/$KDUMP_KERNELVER/kernel-signing-ppc.cer") } # remove a previously loaded key. There's no real security implication @@ -631,7 +632,7 @@ function load_kdump_kernel_key() # to be idempotent and so as to reduce the potential for confusion. function remove_kdump_kernel_key() { - if [[ -z "$KDUMP_KEY_ID" ]]; then + if [[ -z $KDUMP_KEY_ID ]]; then return fi @@ -696,7 +697,7 @@ check_ssh_config() case "$config_opt" in sshkey) # remove inline comments after the end of a directive. - if [[ -f "$config_val" ]]; then + if [[ -f $config_val ]]; then # canonicalize the path SSH_KEY_LOCATION=$(/usr/bin/readlink -m "$config_val") else @@ -709,14 +710,14 @@ check_ssh_config() ssh) DUMP_TARGET=$config_val ;; - *) - ;; + *) ;; + esac done <<< "$(kdump_read_conf)" #make sure they've configured kdump.conf for ssh dumps SSH_TARGET=$(echo -n "$DUMP_TARGET" | sed -n '/.*@/p') - if [[ -z "$SSH_TARGET" ]]; then + if [[ -z $SSH_TARGET ]]; then return 1 fi return 0 @@ -763,7 +764,7 @@ check_and_wait_network_ready() diff=$((cur - start_time)) # 60s time out if [[ $diff -gt 180 ]]; then - break; + break fi sleep 1 done @@ -814,19 +815,19 @@ propagate_ssh_key() show_reserved_mem() { - local mem - local mem_mb + local mem + local mem_mb - mem=$(</sys/kernel/kexec_crash_size) - mem_mb=$((mem / 1024 / 1024)) + mem=$(< /sys/kernel/kexec_crash_size) + mem_mb=$((mem / 1024 / 1024)) - dinfo "Reserved ${mem_mb}MB memory for crash kernel" + dinfo "Reserved ${mem_mb}MB memory for crash kernel" } check_current_fadump_status() { # Check if firmware-assisted dump has been registered. - rc=$(<$FADUMP_REGISTER_SYS_NODE) + rc=$(< $FADUMP_REGISTER_SYS_NODE) [[ $rc -eq 1 ]] && return 0 return 1 } @@ -848,8 +849,8 @@ save_raw() local raw_target raw_target=$(kdump_get_conf_val raw) - [[ -z "$raw_target" ]] && return 0 - [[ -b "$raw_target" ]] || { + [[ -z $raw_target ]] && return 0 + [[ -b $raw_target ]] || { derror "raw partition $raw_target not found" return 1 } @@ -859,22 +860,22 @@ save_raw() return 0 fi kdump_dir=$(kdump_get_conf_val path) - if [[ -z "${kdump_dir}" ]]; then + if [[ -z ${kdump_dir} ]]; then coredir="/var/crash/$(date +"%Y-%m-%d-%H:%M")" else coredir="${kdump_dir}/$(date +"%Y-%m-%d-%H:%M")" fi mkdir -p "$coredir" - [[ -d "$coredir" ]] || { + [[ -d $coredir ]] || { derror "failed to create $coredir" return 1 } - if makedumpfile -R "$coredir/vmcore" < "$raw_target" >/dev/null 2>&1; then + if makedumpfile -R "$coredir/vmcore" < "$raw_target" > /dev/null 2>&1; then # dump found dinfo "Dump saved to $coredir/vmcore" # wipe makedumpfile header - dd if=/dev/zero of="$raw_target" bs=1b count=1 2>/dev/null + dd if=/dev/zero of="$raw_target" bs=1b count=1 2> /dev/null else rm -rf "$coredir" fi @@ -897,11 +898,11 @@ path_to_be_relabeled() if is_user_configured_dump_target; then if is_mount_in_dracut_args; then - return; + return fi _target=$(local_fs_dump_target) - if [[ -n "$_target" ]]; then + if [[ -n $_target ]]; then _mnt=$(get_mntpoint_from_target "$_target") if ! is_mounted "$_mnt"; then return @@ -913,8 +914,8 @@ path_to_be_relabeled() _path=$(get_save_path) # if $_path is masked by other mount, we will not relabel it. - _rmnt=$(df "$_mnt/$_path" 2>/dev/null | tail -1 | awk '{ print $NF }') - if [[ "$_rmnt" == "$_mnt" ]]; then + _rmnt=$(df "$_mnt/$_path" 2> /dev/null | tail -1 | awk '{ print $NF }') + if [[ $_rmnt == "$_mnt" ]]; then echo "$_mnt/$_path" fi } @@ -924,14 +925,14 @@ selinux_relabel() local _path _i _attr _path=$(path_to_be_relabeled) - if [[ -z "$_path" ]] || ! [[ -d "$_path" ]] ; then + if [[ -z $_path ]] || ! [[ -d $_path ]]; then return fi while read -r _i; do - _attr=$(getfattr -m "security.selinux" "$_i" 2>/dev/null) - if [[ -z "$_attr" ]]; then - restorecon "$_i"; + _attr=$(getfattr -m "security.selinux" "$_i" 2> /dev/null) + if [[ -z $_attr ]]; then + restorecon "$_i" fi done <<< "$(find "$_path")" } @@ -947,7 +948,7 @@ check_fence_kdump_config() nodes=$(kdump_get_conf_val "fence_kdump_nodes") for node in $nodes; do - if [[ "$node" = "$hostname" ]]; then + if [[ $node == "$hostname" ]]; then derror "Option fence_kdump_nodes cannot contain $hostname" return 1 fi @@ -1003,25 +1004,26 @@ check_failure_action_config() default_option=$(kdump_get_conf_val default) failure_action=$(kdump_get_conf_val failure_action) - if [[ -z "$failure_action" ]] && [[ -z "$default_option" ]]; then + if [[ -z $failure_action ]] && [[ -z $default_option ]]; then return 0 - elif [[ -n "$failure_action" ]] && [[ -n "$default_option" ]]; then + elif [[ -n $failure_action ]] && [[ -n $default_option ]]; then derror "Cannot specify 'failure_action' and 'default' option together" return 1 fi - if [[ -n "$default_option" ]]; then + if [[ -n $default_option ]]; then option="default" failure_action="$default_option" fi case "$failure_action" in - reboot|halt|poweroff|shell|dump_to_rootfs) + reboot | halt | poweroff | shell | dump_to_rootfs) return 0 - ;; - *) + ;; + *) dinfo $"Usage kdump.conf: $option {reboot|halt|poweroff|shell|dump_to_rootfs}" return 1 + ;; esac } @@ -1030,16 +1032,17 @@ check_final_action_config() local final_action final_action=$(kdump_get_conf_val final_action) - if [[ -z "$final_action" ]]; then + if [[ -z $final_action ]]; then return 0 else case "$final_action" in - reboot|halt|poweroff) + reboot | halt | poweroff) return 0 - ;; - *) + ;; + *) dinfo $"Usage kdump.conf: final_action {reboot|halt|poweroff}" return 1 + ;; esac fi } @@ -1056,7 +1059,7 @@ start() return 1 fi - if sestatus 2>/dev/null | grep -q "SELinux status.*enabled"; then + if sestatus 2> /dev/null | grep -q "SELinux status.*enabled"; then selinux_relabel fi @@ -1187,7 +1190,8 @@ stop() return 0 } -rebuild() { +rebuild() +{ check_config || return 1 if check_ssh_config; then @@ -1203,33 +1207,34 @@ rebuild() { return $? } -do_estimate() { +do_estimate() +{ local kdump_mods local -A large_mods local baseline local kernel_size mod_size initrd_size baseline_size runtime_size reserved_size estimated_size recommended_size - local size_mb=$(( 1024 * 1024 )) + local size_mb=$((1024 * 1024)) setup_initrd - if [[ ! -f "$TARGET_INITRD" ]]; then + if [[ ! -f $TARGET_INITRD ]]; then derror "kdumpctl estimate: kdump initramfs is not built yet." exit 1 fi kdump_mods="$(lsinitrd "$TARGET_INITRD" -f /usr/lib/dracut/hostonly-kernel-modules.txt | tr '\n' ' ')" baseline=$(kdump_get_arch_recommend_size) - if [[ "${baseline: -1}" == "M" ]]; then + if [[ ${baseline: -1} == "M" ]]; then baseline=${baseline%M} - elif [[ "${baseline: -1}" == "G" ]]; then - baseline=$(( ${baseline%G} * 1024 )) - elif [[ "${baseline: -1}" == "T" ]]; then - baseline=$(( ${baseline%Y} * 1048576 )) + elif [[ ${baseline: -1} == "G" ]]; then + baseline=$((${baseline%G} * 1024)) + elif [[ ${baseline: -1} == "T" ]]; then + baseline=$((${baseline%Y} * 1048576)) fi # The default pre-reserved crashkernel value baseline_size=$((baseline * size_mb)) # Current reserved crashkernel size - reserved_size=$(</sys/kernel/kexec_crash_size) + reserved_size=$(< /sys/kernel/kexec_crash_size) # A pre-estimated value for userspace usage and kernel # runtime allocation, 64M should good for most cases runtime_size=$((64 * size_mb)) @@ -1240,7 +1245,7 @@ do_estimate() { # Kernel modules static size after loaded mod_size=0 while read -r _name _size _; do - if [[ ! " $kdump_mods " == *" $_name "* ]]; then + if [[ " $kdump_mods " != *" $_name "* ]]; then continue fi mod_size=$((mod_size + _size)) @@ -1255,8 +1260,8 @@ do_estimate() { crypt_size=0 for _dev in $(get_all_kdump_crypt_dev); do _crypt_info=$(cryptsetup luksDump "/dev/block/$_dev") - [[ $(echo "$_crypt_info" | sed -n "s/^Version:\s*\(.*\)/\1/p" ) == "2" ]] || continue - for _mem in $(echo "$_crypt_info" | sed -n "s/\sMemory:\s*\(.*\)/\1/p" | sort -n ); do + [[ $(echo "$_crypt_info" | sed -n "s/^Version:\s*\(.*\)/\1/p") == "2" ]] || continue + for _mem in $(echo "$_crypt_info" | sed -n "s/\sMemory:\s*\(.*\)/\1/p" | sort -n); do crypt_size=$((crypt_size + _mem * 1024)) break done @@ -1277,10 +1282,10 @@ do_estimate() { echo "Kernel modules size: $((mod_size / size_mb))M" echo "Initramfs size: $((initrd_size / size_mb))M" echo "Runtime reservation: $((runtime_size / size_mb))M" - [[ $crypt_size -ne 0 ]] && \ - echo "LUKS required size: $((crypt_size / size_mb))M" + [[ $crypt_size -ne 0 ]] && + echo "LUKS required size: $((crypt_size / size_mb))M" echo -n "Large modules:" - if [[ "${#large_mods[@]}" -eq 0 ]]; then + if [[ ${#large_mods[@]} -eq 0 ]]; then echo " <none>" else echo "" @@ -1294,14 +1299,15 @@ do_estimate() { fi } -reset_crashkernel() { +reset_crashkernel() +{ local kernel=$1 entry crashkernel_default local grub_etc_default="/etc/default/grub" - [[ -z "$kernel" ]] && kernel=$(uname -r) - crashkernel_default=$(<"/usr/lib/modules/$kernel/crashkernel.default") &>/dev/null + [[ -z $kernel ]] && kernel=$(uname -r) + crashkernel_default=$(< "/usr/lib/modules/$kernel/crashkernel.default") &> /dev/null - if [[ -z "$crashkernel_default" ]]; then + if [[ -z $crashkernel_default ]]; then derror "$kernel doesn't have a crashkernel.default" exit 1 fi @@ -1318,7 +1324,7 @@ reset_crashkernel() { entry=${entry#\"} entry=${entry%\"} - if [[ -f "$grub_etc_default" ]]; then + if [[ -f $grub_etc_default ]]; then sed -i -e "s/^\(GRUB_CMDLINE_LINUX=.*\)crashkernel=[^\ \"]*\([\ \"].*\)$/\1$crashkernel_default\2/" "$grub_etc_default" fi @@ -1328,18 +1334,18 @@ reset_crashkernel() { fi } -if [[ ! -f "$KDUMP_CONFIG_FILE" ]]; then +if [[ ! -f $KDUMP_CONFIG_FILE ]]; then derror "Error: No kdump config file found!" exit 1 fi -main () +main() { # Determine if the dump mode is kdump or fadump determine_dump_mode case "$1" in - start) + start) if [[ -s /proc/vmcore ]]; then save_core reboot @@ -1347,51 +1353,52 @@ main () start fi ;; - stop) + stop) stop ;; - status) + status) EXIT_CODE=0 check_current_status case "$?" in - 0) + 0) dinfo "Kdump is operational" EXIT_CODE=0 ;; - 1) + 1) dinfo "Kdump is not operational" EXIT_CODE=3 ;; esac exit $EXIT_CODE ;; - reload) + reload) reload ;; - restart) + restart) stop start ;; - rebuild) + rebuild) rebuild ;; - condrestart) - ;; - propagate) + condrestart) ;; + + propagate) propagate_ssh_key ;; - showmem) + showmem) show_reserved_mem ;; - estimate) + estimate) do_estimate ;; - reset-crashkernel) + reset-crashkernel) reset_crashkernel "$2" ;; - *) + *) dinfo $"Usage: $0 {estimate|start|stop|status|restart|reload|rebuild|reset-crashkernel|propagate|showmem}" exit 1 + ;; esac } @@ -1400,6 +1407,9 @@ single_instance_lock # To avoid fd 9 leaking, we invoke a subshell, close fd 9 and call main. # So that fd isn't leaking when main is invoking a subshell. -(exec 9<&-; main "$@") +( + exec 9<&- + main "$@" +) exit $? diff --git a/mkdumprd b/mkdumprd index 93eaeae6..919ee2f4 100644 --- a/mkdumprd +++ b/mkdumprd @@ -27,7 +27,7 @@ SAVE_PATH=$(get_save_path) OVERRIDE_RESETTABLE=0 extra_modules="" -dracut_args=( --add kdumpbase --quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode strict -o "plymouth dash resume ifcfg earlykdump" ) +dracut_args=(--add kdumpbase --quiet --hostonly --hostonly-cmdline --hostonly-i18n --hostonly-mode strict -o "plymouth dash resume ifcfg earlykdump") MKDUMPRD_TMPDIR="$(mktemp -d -t mkdumprd.XXXXXX)" [ -d "$MKDUMPRD_TMPDIR" ] || perror_exit "dracut: mktemp -p -d -t dracut.XXXXXX failed." @@ -43,66 +43,71 @@ trap ' # clean up after ourselves no matter how we die. trap 'exit 1;' SIGINT -add_dracut_arg() { - dracut_args+=( "$@" ) +add_dracut_arg() +{ + dracut_args+=("$@") } -add_dracut_mount() { - add_dracut_arg "--mount" "$1" +add_dracut_mount() +{ + add_dracut_arg "--mount" "$1" } -add_dracut_sshkey() { - add_dracut_arg "--sshkey" "$1" +add_dracut_sshkey() +{ + add_dracut_arg "--sshkey" "$1" } # caller should ensure $1 is valid and mounted in 1st kernel -to_mount() { - local _target=$1 _fstype=$2 _options=$3 _sed_cmd _new_mntpoint _pdev - - _new_mntpoint=$(get_kdump_mntpoint_from_target "$_target") - _fstype="${_fstype:-$(get_fs_type_from_target "$_target")}" - _options="${_options:-$(get_mntopt_from_target "$_target")}" - _options="${_options:-defaults}" - - if [[ "$_fstype" == "nfs"* ]]; then - _pdev=$_target - _sed_cmd+='s/,addr=[^,]*//;' - _sed_cmd+='s/,proto=[^,]*//;' - _sed_cmd+='s/,clientaddr=[^,]*//;' - else - # for non-nfs _target converting to use udev persistent name - _pdev="$(kdump_get_persistent_dev "$_target")" - if [[ -z $_pdev ]]; then - return 1 - fi - fi - - # mount fs target as rw in 2nd kernel - _sed_cmd+='s/\(^\|,\)ro\($\|,\)/\1rw\2/g;' - # with 'noauto' in fstab nfs and non-root disk mount will fail in 2nd - # kernel, filter it out here. - _sed_cmd+='s/\(^\|,\)noauto\($\|,\)/\1/g;' - # drop nofail or nobootwait - _sed_cmd+='s/\(^\|,\)nofail\($\|,\)/\1/g;' - _sed_cmd+='s/\(^\|,\)nobootwait\($\|,\)/\1/g;' - - _options=$(echo "$_options" | sed "$_sed_cmd") - - echo "$_pdev $_new_mntpoint $_fstype $_options" +to_mount() +{ + local _target=$1 _fstype=$2 _options=$3 _sed_cmd _new_mntpoint _pdev + + _new_mntpoint=$(get_kdump_mntpoint_from_target "$_target") + _fstype="${_fstype:-$(get_fs_type_from_target "$_target")}" + _options="${_options:-$(get_mntopt_from_target "$_target")}" + _options="${_options:-defaults}" + + if [[ $_fstype == "nfs"* ]]; then + _pdev=$_target + _sed_cmd+='s/,addr=[^,]*//;' + _sed_cmd+='s/,proto=[^,]*//;' + _sed_cmd+='s/,clientaddr=[^,]*//;' + else + # for non-nfs _target converting to use udev persistent name + _pdev="$(kdump_get_persistent_dev "$_target")" + if [[ -z $_pdev ]]; then + return 1 + fi + fi + + # mount fs target as rw in 2nd kernel + _sed_cmd+='s/\(^\|,\)ro\($\|,\)/\1rw\2/g;' + # with 'noauto' in fstab nfs and non-root disk mount will fail in 2nd + # kernel, filter it out here. + _sed_cmd+='s/\(^\|,\)noauto\($\|,\)/\1/g;' + # drop nofail or nobootwait + _sed_cmd+='s/\(^\|,\)nofail\($\|,\)/\1/g;' + _sed_cmd+='s/\(^\|,\)nobootwait\($\|,\)/\1/g;' + + _options=$(echo "$_options" | sed "$_sed_cmd") + + echo "$_pdev $_new_mntpoint $_fstype $_options" } #Function: get_ssh_size #$1=dump target #called from while loop and shouldn't read from stdin, so we're using "ssh -n" -get_ssh_size() { - local _out +get_ssh_size() +{ + local _out - if ! _out=$(ssh -q -n -i "$SSH_KEY_LOCATION" -o BatchMode=yes -o StrictHostKeyChecking=yes "$1" "df -P $SAVE_PATH"); then - perror_exit "checking remote ssh server available size failed." - fi + if ! _out=$(ssh -q -n -i "$SSH_KEY_LOCATION" -o BatchMode=yes -o StrictHostKeyChecking=yes "$1" "df -P $SAVE_PATH"); then + perror_exit "checking remote ssh server available size failed." + fi - #ssh output removed the line break, so print field NF-2 - echo -n "$_out" | tail -1 | awk '{avail=NF-2; print $avail}' + #ssh output removed the line break, so print field NF-2 + echo -n "$_out" | tail -1 | awk '{avail=NF-2; print $avail}' } #mkdir if save path does not exist on ssh dump target @@ -111,320 +116,323 @@ get_ssh_size() { #called from while loop and shouldn't read from stdin, so we're using "ssh -n" mkdir_save_path_ssh() { - local _opt _dir - _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes" - # shellcheck disable=SC2086 - ssh -qn $_opt "$1" mkdir -p "$SAVE_PATH" &>/dev/null || \ - perror_exit "mkdir failed on $1:$SAVE_PATH" - - #check whether user has write permission on $1:$SAVE_PATH - # shellcheck disable=SC2086 - _dir=$(ssh -qn $_opt "$1" mktemp -dqp "$SAVE_PATH" 2>/dev/null) || \ - perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make sure user has write permission on destination" - # shellcheck disable=SC2086 - ssh -qn $_opt "$1" rmdir "$_dir" - - return 0 + local _opt _dir + _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes" + # shellcheck disable=SC2086 + ssh -qn $_opt "$1" mkdir -p "$SAVE_PATH" &> /dev/null || + perror_exit "mkdir failed on $1:$SAVE_PATH" + + #check whether user has write permission on $1:$SAVE_PATH + # shellcheck disable=SC2086 + _dir=$(ssh -qn $_opt "$1" mktemp -dqp "$SAVE_PATH" 2> /dev/null) || + perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make sure user has write permission on destination" + # shellcheck disable=SC2086 + ssh -qn $_opt "$1" rmdir "$_dir" + + return 0 } #Function: get_fs_size #$1=dump target -get_fs_size() { - df -P "$(get_mntpoint_from_target "$1")/$SAVE_PATH"|tail -1|awk '{print $4}' +get_fs_size() +{ + df -P "$(get_mntpoint_from_target "$1")/$SAVE_PATH" | tail -1 | awk '{print $4}' } #Function: get_raw_size #$1=dump target -get_raw_size() { - fdisk -s "$1" +get_raw_size() +{ + fdisk -s "$1" } #Function: check_size #$1: dump type string ('raw', 'fs', 'ssh') #$2: dump target -check_size() { - local avail memtotal - - memtotal=$(awk '/MemTotal/{print $2}' /proc/meminfo) - case "$1" in - raw) - avail=$(get_raw_size "$2") - ;; - ssh) - avail=$(get_ssh_size "$2") - ;; - fs) - avail=$(get_fs_size "$2") - ;; - *) - return - esac || perror_exit "Check dump target size failed" - - if [[ "$avail" -lt "$memtotal" ]]; then - dwarn "Warning: There might not be enough space to save a vmcore." - dwarn " The size of $2 should be greater than $memtotal kilo bytes." - fi +check_size() +{ + local avail memtotal + + memtotal=$(awk '/MemTotal/{print $2}' /proc/meminfo) + case "$1" in + raw) + avail=$(get_raw_size "$2") + ;; + ssh) + avail=$(get_ssh_size "$2") + ;; + fs) + avail=$(get_fs_size "$2") + ;; + *) + return + ;; + esac || perror_exit "Check dump target size failed" + + if [[ $avail -lt $memtotal ]]; then + dwarn "Warning: There might not be enough space to save a vmcore." + dwarn " The size of $2 should be greater than $memtotal kilo bytes." + fi } check_save_path_fs() { - local _path=$1 + local _path=$1 - if [[ ! -d $_path ]]; then - perror_exit "Dump path $_path does not exist." - fi + if [[ ! -d $_path ]]; then + perror_exit "Dump path $_path does not exist." + fi } mount_failure() { - local _target=$1 - local _mnt=$2 - local _fstype=$3 - local msg="Failed to mount $_target" + local _target=$1 + local _mnt=$2 + local _fstype=$3 + local msg="Failed to mount $_target" - if [[ -n "$_mnt" ]]; then - msg="$msg on $_mnt" - fi + if [[ -n $_mnt ]]; then + msg="$msg on $_mnt" + fi - msg="$msg for kdump preflight check." + msg="$msg for kdump preflight check." - if [[ $_fstype = "nfs" ]]; then - msg="$msg Please make sure nfs-utils has been installed." - fi + if [[ $_fstype == "nfs" ]]; then + msg="$msg Please make sure nfs-utils has been installed." + fi - perror_exit "$msg" + perror_exit "$msg" } check_user_configured_target() { - local _target=$1 _cfg_fs_type=$2 _mounted - local _mnt _opt _fstype - - _mnt=$(get_mntpoint_from_target "$_target") - _opt=$(get_mntopt_from_target "$_target") - _fstype=$(get_fs_type_from_target "$_target") - - if [[ -n "$_fstype" ]]; then - # In case of nfs4, nfs should be used instead, nfs* options is deprecated in kdump.conf - [[ $_fstype = "nfs"* ]] && _fstype=nfs - - if [[ -n "$_cfg_fs_type" ]] && [[ "$_fstype" != "$_cfg_fs_type" ]]; then - perror_exit "\"$_target\" have a wrong type config \"$_cfg_fs_type\", expected \"$_fstype\"" - fi - else - _fstype="$_cfg_fs_type" - _fstype="$_cfg_fs_type" - fi - - # For noauto mount, mount it inplace with default value. - # Else use the temporary target directory - if [[ -n "$_mnt" ]]; then - if ! is_mounted "$_mnt"; then - if [[ $_opt = *",noauto"* ]]; then - mount "$_mnt" || mount_failure "$_target" "$_mnt" "$_fstype" - _mounted=$_mnt - else - perror_exit "Dump target \"$_target\" is neither mounted nor configured as \"noauto\"" - fi - fi - else - _mnt=$MKDUMPRD_TMPMNT - mkdir -p "$_mnt" - mount "$_target" "$_mnt" -t "$_fstype" -o defaults || mount_failure "$_target" "" "$_fstype" - _mounted=$_mnt - fi - - # For user configured target, use $SAVE_PATH as the dump path within the target - if [[ ! -d "$_mnt/$SAVE_PATH" ]]; then - perror_exit "Dump path \"$_mnt/$SAVE_PATH\" does not exist in dump target \"$_target\"" - fi - - check_size fs "$_target" - - # Unmount it early, if function is interrupted and didn't reach here, the shell trap will clear it up anyway - if [[ -n "$_mounted" ]]; then - umount -f -- "$_mounted" - fi + local _target=$1 _cfg_fs_type=$2 _mounted + local _mnt _opt _fstype + + _mnt=$(get_mntpoint_from_target "$_target") + _opt=$(get_mntopt_from_target "$_target") + _fstype=$(get_fs_type_from_target "$_target") + + if [[ -n $_fstype ]]; then + # In case of nfs4, nfs should be used instead, nfs* options is deprecated in kdump.conf + [[ $_fstype == "nfs"* ]] && _fstype=nfs + + if [[ -n $_cfg_fs_type ]] && [[ $_fstype != "$_cfg_fs_type" ]]; then + perror_exit "\"$_target\" have a wrong type config \"$_cfg_fs_type\", expected \"$_fstype\"" + fi + else + _fstype="$_cfg_fs_type" + _fstype="$_cfg_fs_type" + fi + + # For noauto mount, mount it inplace with default value. + # Else use the temporary target directory + if [[ -n $_mnt ]]; then + if ! is_mounted "$_mnt"; then + if [[ $_opt == *",noauto"* ]]; then + mount "$_mnt" || mount_failure "$_target" "$_mnt" "$_fstype" + _mounted=$_mnt + else + perror_exit "Dump target \"$_target\" is neither mounted nor configured as \"noauto\"" + fi + fi + else + _mnt=$MKDUMPRD_TMPMNT + mkdir -p "$_mnt" + mount "$_target" "$_mnt" -t "$_fstype" -o defaults || mount_failure "$_target" "" "$_fstype" + _mounted=$_mnt + fi + + # For user configured target, use $SAVE_PATH as the dump path within the target + if [[ ! -d "$_mnt/$SAVE_PATH" ]]; then + perror_exit "Dump path \"$_mnt/$SAVE_PATH\" does not exist in dump target \"$_target\"" + fi + + check_size fs "$_target" + + # Unmount it early, if function is interrupted and didn't reach here, the shell trap will clear it up anyway + if [[ -n $_mounted ]]; then + umount -f -- "$_mounted" + fi } # $1: core_collector config value -verify_core_collector() { - local _cmd="${1%% *}" - local _params="${1#* }" - - if [[ "$_cmd" != "makedumpfile" ]]; then - if is_raw_dump_target; then - dwarn "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually." - fi - return - fi - - if is_ssh_dump_target || is_raw_dump_target; then - if ! strstr "$_params" "-F"; then - perror_exit "The specified dump target needs makedumpfile \"-F\" option." - fi - _params="$_params vmcore" - else - _params="$_params vmcore dumpfile" - fi - - # shellcheck disable=SC2086 - if ! $_cmd --check-params $_params; then - perror_exit "makedumpfile parameter check failed." - fi +verify_core_collector() +{ + local _cmd="${1%% *}" + local _params="${1#* }" + + if [[ $_cmd != "makedumpfile" ]]; then + if is_raw_dump_target; then + dwarn "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually." + fi + return + fi + + if is_ssh_dump_target || is_raw_dump_target; then + if ! strstr "$_params" "-F"; then + perror_exit 'The specified dump target needs makedumpfile "-F" option.' + fi + _params="$_params vmcore" + else + _params="$_params vmcore dumpfile" + fi + + # shellcheck disable=SC2086 + if ! $_cmd --check-params $_params; then + perror_exit "makedumpfile parameter check failed." + fi } -add_mount() { - local _mnt +add_mount() +{ + local _mnt - _mnt=$(to_mount "$@") || exit 1 + _mnt=$(to_mount "$@") || exit 1 - add_dracut_mount "$_mnt" + add_dracut_mount "$_mnt" } #handle the case user does not specify the dump target explicitly handle_default_dump_target() { - local _target - local _mntpoint + local _target + local _mntpoint - is_user_configured_dump_target && return + is_user_configured_dump_target && return - check_save_path_fs "$SAVE_PATH" + check_save_path_fs "$SAVE_PATH" - _save_path=$(get_bind_mount_source "$SAVE_PATH") - _target=$(get_target_from_path "$_save_path") - _mntpoint=$(get_mntpoint_from_target "$_target") + _save_path=$(get_bind_mount_source "$SAVE_PATH") + _target=$(get_target_from_path "$_save_path") + _mntpoint=$(get_mntpoint_from_target "$_target") - SAVE_PATH=${_save_path##"$_mntpoint"} - add_mount "$_target" - check_size fs "$_target" + SAVE_PATH=${_save_path##"$_mntpoint"} + add_mount "$_target" + check_size fs "$_target" } # $1: function name for_each_block_target() { - local dev majmin + local dev majmin - for dev in $(get_kdump_targets); do - [[ -b "$dev" ]] || continue - majmin=$(get_maj_min "$dev") - check_block_and_slaves "$1" "$majmin" && return 1 - done + for dev in $(get_kdump_targets); do + [[ -b $dev ]] || continue + majmin=$(get_maj_min "$dev") + check_block_and_slaves "$1" "$majmin" && return 1 + done - return 0 + return 0 } #judge if a specific device with $1 is unresettable #return false if unresettable. is_unresettable() { - local path device resettable=1 - - path="/sys/$(udevadm info --query=all --path="/sys/dev/block/$1" | awk '/^P:/ {print $2}' | sed -e 's/\(cciss[0-9]\+\/\).*/\1/g' -e 's/\/block\/.*$//')/resettable" - if [[ -f "$path" ]]; then - resettable="$(<path)" - [[ $resettable -eq 0 ]] && [[ "$OVERRIDE_RESETTABLE" -eq 0 ]] && { - device=$(udevadm info --query=all --path="/sys/dev/block/$1" | awk -F= '/DEVNAME/{print $2}') - derror "Error: Can not save vmcore because device $device is unresettable" - return 0 - } - fi - - return 1 + local path device resettable=1 + + path="/sys/$(udevadm info --query=all --path="/sys/dev/block/$1" | awk '/^P:/ {print $2}' | sed -e 's/\(cciss[0-9]\+\/\).*/\1/g' -e 's/\/block\/.*$//')/resettable" + if [[ -f $path ]]; then + resettable="$(< path)" + [[ $resettable -eq 0 ]] && [[ $OVERRIDE_RESETTABLE -eq 0 ]] && { + device=$(udevadm info --query=all --path="/sys/dev/block/$1" | awk -F= '/DEVNAME/{print $2}') + derror "Error: Can not save vmcore because device $device is unresettable" + return 0 + } + fi + + return 1 } #check if machine is resettable. #return true if resettable check_resettable() { - local _target _override_resettable + local _target _override_resettable - _override_resettable=$(kdump_get_conf_val override_resettable) - OVERRIDE_RESETTABLE=${_override_resettable:-$OVERRIDE_RESETTABLE} + _override_resettable=$(kdump_get_conf_val override_resettable) + OVERRIDE_RESETTABLE=${_override_resettable:-$OVERRIDE_RESETTABLE} - for_each_block_target is_unresettable && return + for_each_block_target is_unresettable && return - return 1 + return 1 } check_crypt() { - local _dev + local _dev - for _dev in $(get_kdump_targets); do - if [[ -n $(get_luks_crypt_dev "$(get_maj_min "$_dev")") ]]; then - derror "Device $_dev is encrypted." && return 1 - fi - done + for _dev in $(get_kdump_targets); do + if [[ -n $(get_luks_crypt_dev "$(get_maj_min "$_dev")") ]]; then + derror "Device $_dev is encrypted." && return 1 + fi + done } if ! check_resettable; then - exit 1 + exit 1 fi if ! check_crypt; then - dwarn "Warning: Encrypted device is in dump path, which is not recommended, see kexec-kdump-howto.txt for more details." + dwarn "Warning: Encrypted device is in dump path, which is not recommended, see kexec-kdump-howto.txt for more details." fi # firstly get right SSH_KEY_LOCATION keyfile=$(kdump_get_conf_val sshkey) -if [[ -f "$keyfile" ]]; then - # canonicalize the path - SSH_KEY_LOCATION=$(/usr/bin/readlink -m "$keyfile") +if [[ -f $keyfile ]]; then + # canonicalize the path + SSH_KEY_LOCATION=$(/usr/bin/readlink -m "$keyfile") fi -while read -r config_opt config_val; -do - # remove inline comments after the end of a directive. - case "$config_opt" in - extra_modules) - extra_modules="$extra_modules $config_val" - ;; - ext[234]|xfs|btrfs|minix|nfs) - check_user_configured_target "$config_val" "$config_opt" - add_mount "$config_val" "$config_opt" - ;; - raw) - # checking raw disk writable - dd if="$config_val" count=1 of=/dev/null > /dev/null 2>&1 || { - perror_exit "Bad raw disk $config_val" - } - _praw=$(persistent_policy="by-id" kdump_get_persistent_dev "$config_val") - if [[ -z $_praw ]]; then - exit 1 - fi - add_dracut_arg "--device" "$_praw" - check_size raw "$config_val" - ;; - ssh) - if strstr "$config_val" "@"; - then - mkdir_save_path_ssh "$config_val" - check_size ssh "$config_val" - add_dracut_sshkey "$SSH_KEY_LOCATION" - else - perror_exit "Bad ssh dump target $config_val" - fi - ;; - core_collector) - verify_core_collector "$config_val" - ;; - dracut_args) - while read -r dracut_arg; do - add_dracut_arg "$dracut_arg" - done <<< "$(echo "$config_val" | xargs -n 1 echo)" - ;; - *) - ;; - esac +while read -r config_opt config_val; do + # remove inline comments after the end of a directive. + case "$config_opt" in + extra_modules) + extra_modules="$extra_modules $config_val" + ;; + ext[234] | xfs | btrfs | minix | nfs) + check_user_configured_target "$config_val" "$config_opt" + add_mount "$config_val" "$config_opt" + ;; + raw) + # checking raw disk writable + dd if="$config_val" count=1 of=/dev/null > /dev/null 2>&1 || { + perror_exit "Bad raw disk $config_val" + } + _praw=$(persistent_policy="by-id" kdump_get_persistent_dev "$config_val") + if [[ -z $_praw ]]; then + exit 1 + fi + add_dracut_arg "--device" "$_praw" + check_size raw "$config_val" + ;; + ssh) + if strstr "$config_val" "@"; then + mkdir_save_path_ssh "$config_val" + check_size ssh "$config_val" + add_dracut_sshkey "$SSH_KEY_LOCATION" + else + perror_exit "Bad ssh dump target $config_val" + fi + ;; + core_collector) + verify_core_collector "$config_val" + ;; + dracut_args) + while read -r dracut_arg; do + add_dracut_arg "$dracut_arg" + done <<< "$(echo "$config_val" | xargs -n 1 echo)" + ;; + *) ;; + + esac done <<< "$(kdump_read_conf)" handle_default_dump_target -if [[ -n "$extra_modules" ]] -then - add_dracut_arg "--add-drivers" "$extra_modules" +if [[ -n $extra_modules ]]; then + add_dracut_arg "--add-drivers" "$extra_modules" fi # TODO: The below check is not needed anymore with the introduction of @@ -433,11 +441,11 @@ fi # parameter available in fadump case. So, find a way to fix that first # before removing this check. if ! is_fadump_capable; then - # The 2nd rootfs mount stays behind the normal dump target mount, - # so it doesn't affect the logic of check_dump_fs_modified(). - is_dump_to_rootfs && add_mount "$(to_dev_name "$(get_root_fs_device)")" + # The 2nd rootfs mount stays behind the normal dump target mount, + # so it doesn't affect the logic of check_dump_fs_modified(). + is_dump_to_rootfs && add_mount "$(to_dev_name "$(get_root_fs_device)")" - add_dracut_arg "--no-hostonly-default-device" + add_dracut_arg "--no-hostonly-default-device" fi dracut "${dracut_args[@]}" "$@" diff --git a/mkfadumprd b/mkfadumprd index 5c96ee75..b890f838 100644 --- a/mkfadumprd +++ b/mkfadumprd @@ -44,22 +44,22 @@ fi ### Unpack the initramfs having dump capture capability mkdir -p "$MKFADUMPRD_TMPDIR/fadumproot" -if ! (pushd "$MKFADUMPRD_TMPDIR/fadumproot" > /dev/null && lsinitrd --unpack "$FADUMP_INITRD" && \ +if ! (pushd "$MKFADUMPRD_TMPDIR/fadumproot" > /dev/null && lsinitrd --unpack "$FADUMP_INITRD" && popd > /dev/null); then derror "mkfadumprd: failed to unpack '$MKFADUMPRD_TMPDIR'" exit 1 fi ### Pack it into the normal boot initramfs with zz-fadumpinit module -_dracut_isolate_args=(\ - --rebuild "$REBUILD_INITRD" --add zz-fadumpinit \ +_dracut_isolate_args=( + --rebuild "$REBUILD_INITRD" --add zz-fadumpinit -i "$MKFADUMPRD_TMPDIR/fadumproot" /fadumproot -i "$MKFADUMPRD_TMPDIR/fadumproot/usr/lib/dracut/hostonly-kernel-modules.txt" /usr/lib/dracut/fadump-kernel-modules.txt ) if is_squash_available; then - _dracut_isolate_args+=( --add squash ) + _dracut_isolate_args+=(--add squash) fi if ! dracut --force --quiet "${_dracut_isolate_args[@]}" "$@" "$TARGET_INITRD"; then -- 2.31.1