[fedora-virt] F17 Host, FedoraX guests no network

F17 host full updated + updatess-testing. No F18-Preview. The only work I had to do was disable eth0 on the host(bios) and bump everything to eth1 Host: ifconfig eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.6 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::222:3fff:fef1:f2d8 prefixlen 64 scopeid 0x20<link> ether 00:22:3f:f1:f2:d8 txqueuelen 1000 (Ethernet) RX packets 371493 bytes 513854679 (490.0 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 189705 bytes 23501474 (22.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 0 (Local Loopback) RX packets 5268 bytes 17202695 (16.4 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 5268 bytes 17202695 (16.4 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 inet 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 ether 52:54:00:62:f8:20 txqueuelen 0 (Ethernet) RX packets 117 bytes 11815 (11.5 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 20 bytes 2613 (2.5 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 virbr0-nic: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 52:54:00:62:f8:20 txqueuelen 500 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 Default.xml : <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh net-edit default or other application using the libvirt API. --> <network> <name>default</name> <uuid>b3db8312-5eb8-fd3e-80bb-f560c08a4e16</uuid> <forward dev='eth1' mode='nat'> <interface dev='eth1'/> </forward> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:62:F8:20'/> <ip address='192.168.1.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.1.200' end='192.168.1.220' /> </dhcp> </ip> </network> Attachment is screencap of F17-Guest ifconfig -- Regards, Frank "Jack of all, fubars"