[AutoQA] #125: initscripts: Choosing the right repo for dependencies
by fedora-badges
#125: initscripts: Choosing the right repo for dependencies
-------------------------+--------------------------------------------------
Reporter: kparal | Owner: jskladan
Type: task | Status: new
Priority: major | Milestone:
Component: tests | Version: 1.0
Keywords: initscripts |
-------------------------+--------------------------------------------------
Currently after new Koji build the initscripts test downloads all relevant
binary packages (related to the particular source package) and installs
them. But the RPM dependencies are installed from stable/updates repos,
not from Koji. Also the dependencies parsed out of Makefile are installed
from stable/updates repos.
We have to inquire a little more into this situation. Is it
sufficient/desirable? Or is it desirable to download dependencies from
updates-testing or bleeding edge Koji? May the initscripts test sometimes
fail because of insufficient dependencies are in stable/updates repos?
This also depends on cases when we are going to use initscripts test. If
it will be used with Bodhi hook, it will be probably easier to solve it
than when used with Koji hook.
--
Ticket URL: <https://fedorahosted.org/autoqa/ticket/125>
AutoQA <http://autoqa.fedorahosted.org>
Automated QA project
12 years, 7 months
[AutoQA] #224: initscripts: installing older package then current fails
by fedora-badges
#224: initscripts: installing older package then current fails
--------------------+-------------------------------------------------------
Reporter: kparal | Owner: jskladan
Type: defect | Status: new
Priority: major | Milestone: Package Update Acceptance Test Plan
Component: tests | Version: 1.0
Keywords: |
--------------------+-------------------------------------------------------
In initscripts test we install some packages. But if those packages are
older than currently installed, the test crashes. Usually we test only
very new package builds, but in same cases this can also happen and we
should have it handled.
{{{
[root@aqd autoqa]# autoqa post-koji-build --kojitag dist-f13
openssh-5.4p1-1.fc13 --local -t initscripts
14:28:27 INFO | Writing results to /usr/share/autotest/client/results
/post-koji-build:initscripts.noarch
14:28:27 INFO | Initializing the state engine
14:28:27 DEBUG| Persistent state variable __steps now set to []
14:28:27 INFO | Symlinking init scripts
14:28:27 DEBUG| Running 'grep :initdefault: /etc/inittab'
14:28:27 DEBUG| Running 'ln -sf /usr/share/autotest/client/tools/autotest
/etc/init.d/autotest'
14:28:27 DEBUG| Running 'ln -sf /usr/share/autotest/client/tools/autotest
/etc/rc3.d/S99autotest'
14:28:27 DEBUG| Dropping caches
14:28:27 DEBUG| Running 'sync'
14:28:27 DEBUG| Running 'echo 3 > /proc/sys/vm/drop_caches'
14:28:27 DEBUG| Running 'rpm -qa'
14:28:28 INFO | START ---- ---- timestamp=1284121708
localtime=Sep 10 14:28:28
14:28:28 DEBUG| Persistent state variable __group_level now set to 1
14:28:28 INFO | START initscripts initscripts
timestamp=1284121708 localtime=Sep 10 14:28:28
14:28:28 DEBUG| Persistent state variable __group_level now set to 2
14:28:28 DEBUG| Crash handling system enabled
14:28:28 DEBUG| Running 'rpm -qa'
14:28:29 INFO |
/etc/yum.repos.d/beakerlib.repo:baseurl=http://afri.fedorapeople.org/beakerlib/
14:28:29 DEBUG| Running 'yum -y install beakerlib'
14:28:29 DEBUG| [stdout] Setting up Install Process
14:28:30 DEBUG| [stdout] Package beakerlib-1.3-1.fc13.noarch already
installed and latest version
14:28:30 DEBUG| [stdout] Nothing to do
14:28:31 INFO | Test started. Number of iterations: 1
14:28:31 INFO | Executing iteration 1 of 1
14:28:31 INFO | Dropping caches between iterations
14:28:31 DEBUG| Running 'sync'
14:28:31 DEBUG| Running 'echo 3 > /proc/sys/vm/drop_caches'
14:28:31 INFO | ========================================
14:28:31 INFO | openssh-5.4p1-1.fc13
14:28:31 INFO | ========================================
14:28:32 INFO | Saving RPMs to
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms
14:28:32 INFO | Grabbing
http://koji.fedoraproject.org/packages/openssh/5.4p1/1.fc13/x86_64/pam_ss...
14:28:34 INFO | Grabbing
http://koji.fedoraproject.org/packages/openssh/5.4p1/1.fc13/x86_64
/openssh-askpass-5.4p1-1.fc13.x86_64.rpm
14:28:35 INFO | Grabbing
http://koji.fedoraproject.org/packages/openssh/5.4p1/1.fc13/x86_64
/openssh-server-5.4p1-1.fc13.x86_64.rpm
14:28:37 INFO | Grabbing
http://koji.fedoraproject.org/packages/openssh/5.4p1/1.fc13/x86_64
/openssh-clients-5.4p1-1.fc13.x86_64.rpm
14:28:39 INFO | Grabbing
http://koji.fedoraproject.org/packages/openssh/5.4p1/1.fc13/x86_64/openss...
14:28:41 DEBUG| Running 'yum -y --nogpgcheck localinstall
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
askpass-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
server-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
clients-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-5.4p1-1.fc13.x86_64.rpm'
14:28:47 ERROR| Exception escaping from test:
Traceback (most recent call last):
File "/usr/share/autotest/client/common_lib/test.py", line 384, in _exec
_call_test_function(self.execute, *p_args, **p_dargs)
File "/usr/share/autotest/client/common_lib/test.py", line 570, in
_call_test_function
return func(*args, **dargs)
File "/usr/share/autotest/client/common_lib/test.py", line 279, in
execute
postprocess_profiled_run, args, dargs)
File "/usr/share/autotest/client/common_lib/test.py", line 201, in
_call_run_once
self.run_once(*args, **dargs)
File "/usr/lib/python2.6/site-packages/autoqa/decorators.py", line 71,
in newf
f_result = f(*args, **kwargs) #call the decorated function
File "/usr/share/autotest/client/site_tests/initscripts/initscripts.py",
line 158, in run_once
utils.system_output(cmd)
File "/usr/share/autotest/client/common_lib/utils.py", line 689, in
system_output
args=args).stdout
File "/usr/share/autotest/client/common_lib/utils.py", line 425, in run
"Command returned non-zero exit status")
CmdError: Command <yum -y --nogpgcheck localinstall
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
askpass-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
server-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
clients-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-5.4p1-1.fc13.x86_64.rpm>
failed, rc=1, Command returned non-zero exit status
* Command:
yum -y --nogpgcheck localinstall
/usr/share/autotest/client/tmp/tmpS_K1om
_initscripts/rpms/pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
askpass-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
server-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
clients-5.4p1-1.fc13.x86_64.rpm
/usr/share/autotest/client/tmp/tmpS_K1om_i
nitscripts/rpms/openssh-5.4p1-1.fc13.x86_64.rpm
Exit status: 1
Duration: 0
stdout:
Setting up Local Package Process
Examining
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64.rpm:
pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64
Marking
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/pam_ssh_agent_auth-0.9.2-24.1.fc13.x86_64.rpm
to be installed
Examining /usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms
/openssh-askpass-5.4p1-1.fc13.x86_64.rpm: openssh-
askpass-5.4p1-1.fc13.x86_64
Marking /usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
askpass-5.4p1-1.fc13.x86_64.rpm to be installed
Examining /usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms
/openssh-server-5.4p1-1.fc13.x86_64.rpm: openssh-
server-5.4p1-1.fc13.x86_64
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
server-5.4p1-1.fc13.x86_64.rpm: does not update installed package.
Examining /usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms
/openssh-clients-5.4p1-1.fc13.x86_64.rpm: openssh-
clients-5.4p1-1.fc13.x86_64
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-
clients-5.4p1-1.fc13.x86_64.rpm: does not update installed package.
Examining
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-5.4p1-1.fc13.x86_64.rpm:
openssh-5.4p1-1.fc13.x86_64
/usr/share/autotest/client/tmp/tmpS_K1om_initscripts/rpms/openssh-5.4p1-1.fc13.x86_64.rpm:
does not update installed package.
Resolving Dependencies
--> Running transaction check
---> Package openssh-askpass.x86_64 0:5.4p1-1.fc13 set to be installed
--> Processing Dependency: openssh = 5.4p1-1.fc13 for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libX11.so.6()(64bit) for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libatk-1.0.so.0()(64bit) for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libcairo.so.2()(64bit) for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libfontconfig.so.1()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libgdk-x11-2.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libgdk_pixbuf-2.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libgtk-x11-2.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libpango-1.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libpangocairo-1.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
--> Processing Dependency: libpangoft2-1.0.so.0()(64bit) for package:
openssh-askpass-5.4p1-1.fc13.x86_64
---> Package pam_ssh_agent_auth.x86_64 0:0.9.2-24.1.fc13 set to be
installed
--> Running transaction check
---> Package atk.x86_64 0:1.30.0-1.fc13 set to be installed
---> Package cairo.x86_64 0:1.8.10-1.fc13 set to be installed
--> Processing Dependency: libpng12.so.0(PNG12_0)(64bit) for package:
cairo-1.8.10-1.fc13.x86_64
--> Processing Dependency: libpixman-1.so.0()(64bit) for package:
cairo-1.8.10-1.fc13.x86_64
--> Processing Dependency: libXrender.so.1()(64bit) for package:
cairo-1.8.10-1.fc13.x86_64
--> Processing Dependency: libpng12.so.0()(64bit) for package:
cairo-1.8.10-1.fc13.x86_64
---> Package fontconfig.x86_64 0:2.8.0-1.fc13 set to be installed
---> Package gtk2.x86_64 0:2.20.1-1.fc13 set to be installed
--> Processing Dependency: libXrandr >= 1.2.99.4-2 for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libtiff >= 3.6.1 for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: hicolor-icon-theme for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXrandr.so.2()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libtiff.so.3()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXdamage.so.1()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXcursor.so.1()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libcups.so.2()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXi.so.6()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libjasper.so.1()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXext.so.6()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXcomposite.so.1()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXinerama.so.1()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
--> Processing Dependency: libXfixes.so.3()(64bit) for package:
gtk2-2.20.1-1.fc13.x86_64
---> Package libX11.x86_64 0:1.3.1-3.fc13 set to be installed
--> Processing Dependency: libX11-common = 1.3.1-3.fc13 for package:
libX11-1.3.1-3.fc13.x86_64
--> Processing Dependency: libxcb.so.1()(64bit) for package:
libX11-1.3.1-3.fc13.x86_64
---> Package openssh-askpass.x86_64 0:5.4p1-1.fc13 set to be installed
--> Processing Dependency: openssh = 5.4p1-1.fc13 for package: openssh-
askpass-5.4p1-1.fc13.x86_64
---> Package pango.x86_64 0:1.28.0-1.fc13 set to be installed
--> Processing Dependency: libthai >= 0.1.9 for package:
pango-1.28.0-1.fc13.x86_64
--> Processing Dependency: libthai.so.0(LIBTHAI_0.1)(64bit) for package:
pango-1.28.0-1.fc13.x86_64
--> Processing Dependency: libthai.so.0()(64bit) for package:
pango-1.28.0-1.fc13.x86_64
--> Processing Dependency: libXft.so.2()(64bit) for package:
pango-1.28.0-1.fc13.x86_64
--> Running transaction check
---> Package cups-libs.x86_64 1:1.4.4-5.fc13 set to be installed
--> Processing Dependency: libgnutls.so.26(GNUTLS_1_4)(64bit) for package:
1:cups-libs-1.4.4-5.fc13.x86_64
--> Processing Dependency: libavahi-common.so.3()(64bit) for package: 1
:cups-libs-1.4.4-5.fc13.x86_64
--> Processing Dependency: libgnutls.so.26()(64bit) for package: 1:cups-
libs-1.4.4-5.fc13.x86_64
--> Processing Dependency: libavahi-client.so.3()(64bit) for package: 1
:cups-libs-1.4.4-5.fc13.x86_64
---> Package hicolor-icon-theme.noarch 0:0.12-1.fc13 set to be installed
---> Package jasper-libs.x86_64 0:1.900.1-15.fc13 set to be installed
---> Package libX11-common.noarch 0:1.3.1-3.fc13 set to be installed
---> Package libXcomposite.x86_64 0:0.4.1-2.fc13 set to be installed
---> Package libXcursor.x86_64 0:1.1.10-4.fc13 set to be installed
--> Processing Dependency: dmz-cursor-themes for package:
libXcursor-1.1.10-4.fc13.x86_64
---> Package libXdamage.x86_64 0:1.1.2-2.fc13 set to be installed
---> Package libXext.x86_64 0:1.1.2-2.fc13 set to be installed
---> Package libXfixes.x86_64 0:4.0.4-2.fc13 set to be installed
---> Package libXft.x86_64 0:2.1.14-1.fc13 set to be installed
---> Package libXi.x86_64 0:1.3.2-1.fc13 set to be installed
---> Package libXinerama.x86_64 0:1.1-2.fc13 set to be installed
---> Package libXrandr.x86_64 0:1.3.0-5.fc13 set to be installed
---> Package libXrender.x86_64 0:0.9.5-1.fc13 set to be installed
---> Package libpng.x86_64 2:1.2.44-1.fc13 set to be installed
---> Package libthai.x86_64 0:0.1.14-2.fc13 set to be installed
---> Package libtiff.x86_64 0:3.9.4-1.fc13 set to be installed
---> Package libxcb.x86_64 0:1.5-1.fc13 set to be installed
--> Processing Dependency: libXau.so.6()(64bit) for package:
libxcb-1.5-1.fc13.x86_64
---> Package openssh-askpass.x86_64 0:5.4p1-1.fc13 set to be installed
--> Processing Dependency: openssh = 5.4p1-1.fc13 for package: openssh-
askpass-5.4p1-1.fc13.x86_64
---> Package pixman.x86_64 0:0.18.0-1.fc13 set to be installed
--> Running transaction check
---> Package avahi.x86_64 0:0.6.25-7.fc13 set to be installed
--> Processing Dependency: libdaemon >= 0.11 for package:
avahi-0.6.25-7.fc13.x86_64
--> Processing Dependency: dbus for package: avahi-0.6.25-7.fc13.x86_64
--> Processing Dependency: libdaemon.so.0()(64bit) for package:
avahi-0.6.25-7.fc13.x86_64
---> Package dmz-cursor-themes.noarch 0:0.4-3.fc13 set to be installed
---> Package gnutls.x86_64 0:2.8.6-2.fc13 set to be installed
--> Processing Dependency: libtasn1.so.3(LIBTASN1_0_3)(64bit) for package:
gnutls-2.8.6-2.fc13.x86_64
--> Processing Dependency: libtasn1.so.3()(64bit) for package:
gnutls-2.8.6-2.fc13.x86_64
---> Package libXau.x86_64 0:1.0.5-1.fc12 set to be installed
---> Package openssh-askpass.x86_64 0:5.4p1-1.fc13 set to be installed
--> Processing Dependency: openssh = 5.4p1-1.fc13 for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Running transaction check
---> Package dbus.x86_64 1:1.2.24-1.fc13 set to be installed
---> Package libdaemon.x86_64 0:0.14-1.fc13 set to be installed
---> Package libtasn1.x86_64 0:2.4-2.fc13 set to be installed
---> Package openssh-askpass.x86_64 0:5.4p1-1.fc13 set to be installed
--> Processing Dependency: openssh = 5.4p1-1.fc13 for package: openssh-
askpass-5.4p1-1.fc13.x86_64
--> Finished Dependency Resolution
You could try using --skip-broken to work around the problem
You could try running: rpm -Va --nofiles --nodigest
stderr:
Error: Package: openssh-askpass-5.4p1-1.fc13.x86_64 (/openssh-
askpass-5.4p1-1.fc13.x86_64)
Requires: openssh = 5.4p1-1.fc13
Installed: openssh-5.4p1-3.fc13.x86_64 (@updates)
openssh = 5.4p1-3.fc13
Available: openssh-5.4p1-1.fc13.x86_64 (fedora)
openssh = 5.4p1-1.fc13
}}}
--
Ticket URL: <https://fedorahosted.org/autoqa/ticket/224>
AutoQA <http://autoqa.fedorahosted.org>
Automated QA project
12 years, 7 months
[AutoQA] #380: initscripts: scheduled against wrong distro
by fedora-badges
#380: initscripts: scheduled against wrong distro
----------------------+-----------------------------------------------------
Reporter: kparal | Owner:
Type: defect | Status: new
Priority: critical | Milestone: Hot issues
Component: tests | Keywords:
----------------------+-----------------------------------------------------
James discovered a problem where openssh was upgraded to f17 version on a
f15 system. There is probably a bug in initscripts's control.autoqa. But
because we plan to remove initscripts soon, we just disabled the test for
now as a hotfix on production server. If we don't decide to remove
initscripts, we need to fix the bug.
{{{
<jlaska> nothing urgent ... just an FYI on something I've come across on
the autoqa production test clients
<jlaska> last month, a few fc15 test clients were down because an fc17
openssh package was installed on them
<jlaska> (which caused ssh logins to fail)
<jlaska> I fixed the issue, but wasn't able to figure out the cause
<jlaska> the problem surfaced again today
<jlaska> Sep 12 15:11:45 Updated: openssh-5.9p1-4.fc17.x86_64
<jlaska> this is on an fedora-release-15-3.noarch
<jlaska> system
<jlaska> not urgent, I'll correct the problem on affected systems
<jlaska> but still not sure how they're getting installed
<jlaska> aha!
<jlaska> initscripts
<jlaska> https://fedorahosted.org/pipermail/autoqa-
results/20110912/424699.html
<jlaska> and
<jlaska> https://fedorahosted.org/pipermail/autoqa-
results/20110912/424827.html
<jlaska> so initscripts is somehow running on an fc17 systems ... odd .. I
thought the control.autoqa prevented that
<jlaska> distro = get_distro(autoqa_args['nvrs'][0])
* kparal is back
<jlaska> however, the control file only shows autoqa_args['nvr'] (not
'nvrs') ... is that the problem?
<jlaska>
http://autoqa.fedoraproject.org/results/191601-autotest/10.5.124.160/control
<kparal> it is probably really caused by initscripts test
<kparal> we're going to remove it soon
<jlaska> it is ... but only because the test was incorrectly scheduled
against fc15 systems (I think)
<kparal> if we don't remove it, I'll look at this issue
<jlaska> I'm going to hotfix this to avoid having to fix this again (prior
to initscripts removal)
<kparal> currently I think it would be easier to just disable initscripts
execution
<jlaska> I can do that too ... even better! :)
<jlaska> just set execute = False in the control.autoqa?
<kparal> just delete tests/initscripts on the production server
<kparal> or yes, amend control.autoqa
<kparal> both works
<kparal> I'll create a ticket about this
<jlaska> I think I see the bug, but easy for now just to disable
<jlaska> added to initscripts/control.autoqa on production ...
<jlaska> # Fri Sep 16 12:11:20 UTC 2011 - jlaska
<jlaska> # initscripts is incorrectly being scheduled on systems of a
different release
<jlaska> # (see https://fedorahosted.org/pipermail/autoqa-
results/20110912/424827.html)
<jlaska> execute = False
}}}
--
Ticket URL: <https://fedorahosted.org/autoqa/ticket/380>
AutoQA <http://autoqa.fedorahosted.org>
Automated QA project
12 years, 7 months
removal of initscripts test
by Kamil Paral
There is an origin/rm_initscripts branch where I removed the initscripts test. Please tell me if you have any concerns.
The current sysvinit test scripts no longer apply. Of course it can be re-written, but it has to be re-written completely. Since these tests were not created by us, but Red Hat BaseOS QA team, we can ask them in the future whether they have an updated set of scripts that check systemd unit files functionality. (Please note, however, that the old scripts were meant to test initscripts LSB compliance, so it's a slightly different goal). I see no reason to keep the current test included.
12 years, 7 months
[PATCH 0/3] Autotest API bug fixes
by Lucas Meneghel Rodrigues
This patchset fixes 3 bugs reported by Kamil Paral in January
2011. Sorry for the large delay. I've recently moved autotest
to a new project hosting, and migrated the issues. Then I
decided working on them, I hope they are still relevant for
autoqa.
The patchset was also submitted as a pull request on github,
for the other autotest maintainers to review. Feel free
to comment on it as well:
https://github.com/autotest/autotest/pull/25
Lucas Meneghel Rodrigues (3):
client.common_lib.base_packages: tar_package - renaming
exclude_string
client.common_lib.base_utils: Do not hardcode mail server in
send_mail()
server.hosts.abstract_ssh: Fix hosts.send_file scp fallback
client/common_lib/base_packages.py | 20 +++++++++++++++++---
client/common_lib/base_utils.py | 32 +++++++++++++++++++++-----------
server/autotest.py | 2 +-
server/frontend.py | 30 ++++++++++++++++++++++--------
server/hosts/abstract_ssh.py | 35 ++++++++++++++++++++++++++++++-----
5 files changed, 91 insertions(+), 28 deletions(-)
--
1.7.6
12 years, 7 months
