3:40 p.m.
hi,
I am testing smartcard authentication with a yubikey neo like described in
https://frasertweedale.github.io/blog-redhat/posts/2016-08-12-yubikey-sc-...
I successfully generated a key using the yubico-piv-tool, and with that a
csr.
yubico-piv-tool -a verify-pin -a request-certificate -s 9e -S "/CN=user50/"
Enter PIN:
Successfully verified PIN.
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
Successfully generated a certificate request.
With this csr I try generating a certificate but it fails:
$ ipa cert-request user50.csr --principal user50 --raw
ipa: ERROR: Request failed with status 500: Non-2xx response from CA REST
API: 500. Invalid Request
In the pki logs I only see this error.
192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
/ca/rest/authorities/edb13864-3c75-4c7d-b5b8-dd4322789437/cert HTTP/1.1"
200 920
192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
/ca/rest/account/logout HTTP/1.1" 204 -
192.168.5.10 - - [08/Nov/2018:22:37:13 +0100] "POST
/ca/rest/certrequests?issuer-id=edb13864-3c75-4c7d-b5b8-dd4322789437
HTTP/1.1" 500 123
Any ideas as to what is going wrong?
Thanks!
--
Groeten,
natxo
4:16 p.m.
Natxo Asenjo via FreeIPA-users wrote:
hi,
I am testing smartcard authentication with a yubikey neo like described
in
https://frasertweedale.github.io/blog-redhat/posts/2016-08-12-yubikey-sc-...
I successfully generated a key using the yubico-piv-tool, and with that
a csr.
yubico-piv-tool -a verify-pin -a request-certificate -s 9e -S "/CN=user50/"
Enter PIN:
Successfully verified PIN.
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
Successfully generated a certificate request.
With this csr I try generating a certificate but it fails:
$ ipa cert-request user50.csr --principal user50 --raw
ipa: ERROR: Request failed with status 500: Non-2xx response from CA
REST API: 500. Invalid Request
In the pki logs I only see this error.
192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
/ca/rest/authorities/edb13864-3c75-4c7d-b5b8-dd4322789437/cert HTTP/1.1"
200 920
192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
/ca/rest/account/logout HTTP/1.1" 204 -
192.168.5.10 - - [08/Nov/2018:22:37:13 +0100] "POST
/ca/rest/certrequests?issuer-id=edb13864-3c75-4c7d-b5b8-dd4322789437
HTTP/1.1" 500 123
Any ideas as to what is going wrong?
You need to specify a profile for it since it is a user certificate.
When I played with this over the summer I started with
https://frasertweedale.github.io/blog-redhat/posts/2016-07-25-freeipa-sub...
rob
4:32 p.m.
On Thu, Nov 08, 2018 at 05:16:53PM -0500, Rob Crittenden via FreeIPA-users wrote:
Natxo Asenjo via FreeIPA-users wrote:
> hi,
>
> I am testing smartcard authentication with a yubikey neo like described
> in
> https://frasertweedale.github.io/blog-redhat/posts/2016-08-12-yubikey-sc-...
>
> I successfully generated a key using the yubico-piv-tool, and with that
> a csr.
>
> yubico-piv-tool -a verify-pin -a request-certificate -s 9e -S
"/CN=user50/"
> Enter PIN:
> Successfully verified PIN.
>
> -----BEGIN CERTIFICATE REQUEST-----
> MIICVjCCAT4CAQAwETEPMA0GA1UEAwwGdXNlcjUwMIIBIjANBgkqhkiG9w0BAQEF
> AAOCAQ8AMIIBCgKCAQEAkWjUxl0qInlYB4TiZ7GkJkgBdomTTzk5GfK76ZizbsGV
> 4xyPmUgf+7eEO3GEvkGiBPJxk0NVJuamuEJTIXtn7h7Wgz6ghCE0uCCupjAJqa57
> Hdm3h3GvofwWuE442YIRHvXydaSkrCAGsL/M3g4tVi7Xn+jTaWrzKsAeqJxQVRPD
> h4R9bN4BIzXL+62qGI9jriM8dJEWCrGFzg6viCujRlybkhQhiLxCGvS8lO3HQ7tF
> lDRZN6Ey/nvFxIC1MtGZgrN3nj/Z37nIBWF4s20CcJau8mfalJQEFjqLkjMh7X8K
> hWKrSdNj43nBTlO0So3qezs4roLkZFSN1hQnCG/pCQIDAQABoAAwDQYJKoZIhvcN
> AQELBQADggEBAH22PLW7Tuc6y5VxIpnaqdsborbp+Twr/kPoDnibJPjV8JBYqC4G
> iQCHDJn+uuJSpiBxTUtYX45CscOiwD8kiDoYIH/DCXUqPAhRudsBpJWDn9TKeFC5
> b0PrwuN5cDo+yKYZW590eLL8/xdjtb9p/M3AU5tSJTbG3dCA5Rp4MdgE97pOYkPg
> 3kUHR19YjH/GnZHeuv8Af+WIJVMvDVGKF+MvJEImSjg/ZQUV6hzBI+oAWr9Hj21q
> KABjiO5AhMyo+uC6WXajkltzUP30cbBlNl0Z34Dw452Ym5uILWAF+ZmlT0sp0Mg4
> lwNPSwst5mhUtQL7AmNHYHg7cAAgXx9Xql0=
> -----END CERTIFICATE REQUEST-----
> Successfully generated a certificate request.
>
> With this csr I try generating a certificate but it fails:
>
> $ ipa cert-request user50.csr --principal user50 --raw
> ipa: ERROR: Request failed with status 500: Non-2xx response from CA
> REST API: 500. Invalid Request
>
> In the pki logs I only see this error.
> 192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
> /ca/rest/authorities/edb13864-3c75-4c7d-b5b8-dd4322789437/cert HTTP/1.1"
> 200 920
> 192.168.5.10 - ipara [08/Nov/2018:22:37:12 +0100] "GET
> /ca/rest/account/logout HTTP/1.1" 204 -
> 192.168.5.10 - - [08/Nov/2018:22:37:13 +0100] "POST
> /ca/rest/certrequests?issuer-id=edb13864-3c75-4c7d-b5b8-dd4322789437
> HTTP/1.1" 500 123
>
> Any ideas as to what is going wrong?
You need to specify a profile for it since it is a user certificate.
When I played with this over the summer I started with
https://frasertweedale.github.io/blog-redhat/posts/2016-07-25-freeipa-sub...
Nevertheless, the Dogtag CA should not be returning status 500.
Naxto, could you please provide Dogtag debug log from
/var/log/pki/pki-tomcat/ca/debug and, if there is any traceback in
the journal at the time of this error, please give detail of that
too (`journalctl -u pki-tomcatd@pki-tomcat`).
Thanks,
Fraser
12:42 a.m.
On Thu, Nov 8, 2018 at 11:32 PM Fraser Tweedale <ftweedal(a)redhat.com> wrote:
Naxto, could you please provide Dogtag debug log from
/var/log/pki/pki-tomcat/ca/debug and, if there is any traceback in
the journal at the time of this error, please give detail of that
too (`journalctl -u pki-tomcatd@pki-tomcat`).
aha, I see an error now in the debug log:
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
createRequests: begins
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: Start parsePKCS10():
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
parsePKCS10: signature verification enabled
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
parsePKCS10 setting thread token
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
Unable to parse PKCS #10 request: java.security.SignatureException: PKCS10:
PKCS10: Request Subject: CN=user50: Invalid PKCS #10 signature
java.security.SignatureException: PKCS10: PKCS10: Request Subject:
CN=user50: Invalid PKCS #10 signature
the journalctl output:
Nov 08 22:37:13 kdc1.unix.asenjo.nl server[10677]: PKCS10: PKCS10: Request
Subject: CN=user50: sig.verify() failed
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Creating session
23596D3C3AFFCDE19F5B386C288E8290
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Principal:
GenericPrincipal[ipara(Certificate Manager Agents,Registration Manager
Agents,)]
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Destroying session
5E49B1956B6902F7DFD52236F5A1A783
Thanks,
Fraser
--
--
Groeten,
natxo
6:14 p.m.
On Fri, Nov 09, 2018 at 07:42:36AM +0100, Natxo Asenjo via FreeIPA-users wrote:
On Thu, Nov 8, 2018 at 11:32 PM Fraser Tweedale
<ftweedal(a)redhat.com> wrote:
>
> Naxto, could you please provide Dogtag debug log from
> /var/log/pki/pki-tomcat/ca/debug and, if there is any traceback in
> the journal at the time of this error, please give detail of that
> too (`journalctl -u pki-tomcatd@pki-tomcat`).
>
>
aha, I see an error now in the debug log:
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
createRequests: begins
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: Start parsePKCS10():
-----BEGIN CERTIFICATE REQUEST-----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-----END CERTIFICATE REQUEST-----
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
parsePKCS10: signature verification enabled
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
parsePKCS10 setting thread token
[08/Nov/2018:22:15:55][ajp-bio-127.0.0.1-8009-exec-1]: EnrollProfile:
Unable to parse PKCS #10 request: java.security.SignatureException: PKCS10:
PKCS10: Request Subject: CN=user50: Invalid PKCS #10 signature
java.security.SignatureException: PKCS10: PKCS10: Request Subject:
CN=user50: Invalid PKCS #10 signature
the journalctl output:
Nov 08 22:37:13 kdc1.unix.asenjo.nl server[10677]: PKCS10: PKCS10: Request
Subject: CN=user50: sig.verify() failed
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Creating session
23596D3C3AFFCDE19F5B386C288E8290
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Principal:
GenericPrincipal[ipara(Certificate Manager Agents,Registration Manager
Agents,)]
Nov 08 23:40:01 kdc1.unix.asenjo.nl server[10677]: Destroying session
5E49B1956B6902F7DFD52236F5A1A783
Hi Naxto,
The CSR's signature is indeed invalid. Were you able to solve the
issue in the meantime?
I'll have a look to see how we could produce better feedback in this
scenario, although it is quite rare to encounter a CSR with bad
signature.
Cheers,
Fraser
3:13 a.m.
hi Fraser,
On Mon, Dec 3, 2018 at 1:14 AM Fraser Tweedale <ftweedal(a)redhat.com> wrote:
Hi Naxto,
The CSR's signature is indeed invalid. Were you able to solve the
issue in the meantime?
yes, I generated a csr locally and saved it in the yubikey. If you do that,
everything works great.
I'll have a look to see how we could produce better feedback in this
scenario, although it is quite rare to encounter a CSR with bad
signature.
Thanks for that.
I must confess I'm really pleased with how well yubikeys work with fedora
as smartcards.
--
Regards,
natxo
1976
days inactive
2002
days old
freeipa-users@lists.fedorahosted.org
5 comments
3 participants
participants (3)
-
Fraser Tweedale -
Natxo Asenjo -
Rob Crittenden