Hi Konrad,
Thanks for the heads up.
My main motivation for just plugging the FC15 kernel into the FC14 machine(s) is that 3 of the hosts live in remote geographies. It's likely they'll probz live the rest of their lives as FC14 machines.
The graphics adaptor is: 05:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
Thanks again. V
On Thu, 29 Mar 2012 10:51:14 AM Konrad Rzeszutek Wilk wrote:
On Thu, Mar 29, 2012 at 01:38:38PM +1100, Virgil wrote:
Hi Konrad,
Firstly, thanks for the reply.
What I've ended up doing is blindly forcing the FC15 kernel in.
Linux rich.wwrich.xxx 2.6.42.9-2.fc15.x86_64 #1 SMP Mon Mar 5 20:55:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
This has worked and resolved by issue as the host is advertising flush diskcache.
[ 1.051933] blkfront: xvda: flush diskcache: enabled [ 1.252959] xvda: xvda1 xvda2 [ 1.297201] blkfront: xvdb: flush diskcache: enabled [ 1.303110] xvdb: xvdb1 xvdb2 [ 1.565645] md: bind<xvda1> [ 1.668360] md: bind<xvdb1> [ 1.691897] md: raid1 personality registered for level 1 [ 1.696683] bio: create slab <bio-1> at 1 [ 1.700177] md/raid1:md127: active with 2 out of 2 mirrors [ 1.701113] md127: detected capacity change from 0 to 7516180480 [ 1.974317] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 2.065875] dracut: Checking ext4: /dev/disk/by-label/rootfs [ 2.067090] dracut: issuing e2fsck -a /dev/disk/by-label/rootfs [ 2.147305] dracut: rootfs: clean, 42918/454272 files, 417708/1835005 blocks [ 2.149062] dracut: Remounting /dev/disk/by-label/rootfs with -o ro [ 2.182952] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 2.195483] dracut: Mounted root filesystem /dev/md127 [ 2.340884] dracut: Switching root
As a side issue, I also recompiled Xen 4.1.2 on fc14 and installed it. Everything worked *except* libvirtd. No domU's listed. So I recompiled FC15's libvirtd too. No go.
I think the F16 has them fixed.
I just backed out. Only the FC15 kernel is left. All running well now.
Oh and also the kernel works great on bare metal except, when under Xen, the graphics went nuts. Added nomodeset to overcomes this.
Which graphics is this? Linux 3.3 has some new fixes for this so if you use F17, the issue should disappear.
The last thing I might try is to recompile the FC15 kernel on an FC14 host to make it easy to install via rpm (assuming it can compile).
On Mon, 26 Mar 2012 01:17:49 PM Konrad Rzeszutek Wilk wrote:
On Mon, Mar 19, 2012 at 01:35:19PM +1100, Virgil wrote:
I'm having a problem with mdraid running in a DomU. The issue is that mdraid declares one leg of the raid to have failed (when there's actually nothing wrong).
DomU is fc16 - 3.2.2-1.fc16.x86_64 Dom0 is fc14 - 2.6.32.26-174.2.xendom0.fc12.x86_64
The same DomU running on Dom0 fc16 - 3.2.7-1.fc16.x86_64 runs perfectly.
This appears to be a known issue, however the resolution (which seems to be to disable barriers on the fly) doesn't seem to work in this case.> >
hm, that is true - it wouldn't as the workarounds are for filesystems.
But perhaps - is there a way to turn barriers of in the raid system?
My question is: Is it possible to pass a parameter to the blkfront driver to ask it not to enable barrier during initialization? or is there another work around?
Not that I know of. You could back-port the proper fix to 2.6.32 (or just "Fix" the older 2.6.32 to not advetise feature-barrier).
[ 1.033058] blkfront: xvda: barrier: enabled [ 1.099153] xvda: xvda1 xvda2 [ 1.102871] blkfront: xvdb: barrier: enabled [ 1.130876] xvdb: xvdb1 xvdb2 [ 1.292692] md: bind<xvdb1> [ 1.413416] md: bind<xvda1> [ 1.419411] md: raid1 personality registered for level 1 [ 1.419836] bio: create slab <bio-1> at 1 [ 1.419953] md/raid1:md127: active with 2 out of 2 mirrors [ 1.419992] md127: detected capacity change from 0 to 7516180480 [ 1.424562] md127: unknown partition table [ 1.547284] EXT4-fs (md127): barriers disabled [ 1.553107] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 1.669483] dracut: Checking ext4: /dev/disk/by-label/rootfs [ 1.669592] dracut: issuing e2fsck -a /dev/disk/by-label/rootfs [ 1.690595] blkfront: barrier: empty write xvdb op failed [ 1.690611] blkfront: xvdb: barrier or flush: disabled [ 1.690628] end_request: I/O error, dev xvdb, sector 14682096 [ 1.690638] end_request: I/O error, dev xvdb, sector 14682096 [ 1.690646] md: super_written gets error=-5, uptodate=0 [ 1.690655] md/raid1:md127: Disk failure on xvdb1, disabling device. [ 1.690657] md/raid1:md127: Operation continuing on 1 devices. [ 1.690677] blkfront: barrier: empty write xvda op failed [ 1.690684] blkfront: xvda: barrier or flush: disabled [ 1.690696] end_request: I/O error, dev xvda, sector 14682096 [ 1.690705] end_request: I/O error, dev xvda, sector 14682096 [ 1.690713] md: super_written gets error=-5, uptodate=0 [ 1.692991] RAID1 conf printout: [ 1.692997] --- wd:1 rd:2 [ 1.693002] disk 0, wo:0, o:1, dev:xvda1 [ 1.693006] disk 1, wo:1, o:0, dev:xvdb1 [ 1.693010] RAID1 conf printout: [ 1.693013] --- wd:1 rd:2 [ 1.693016] disk 0, wo:0, o:1, dev:xvda1 [ 1.702896] dracut: rootfs: clean, 25635/454272 files, 293967/1835005 blocks [ 1.703682] dracut: Remounting /dev/disk/by-label/rootfs with -o ro [ 1.773347] EXT4-fs (md127): barriers disabled [ 1.774552] EXT4-fs (md127): mounted filesystem with ordered data mode. Opts: (null) [ 1.797159] dracut: Mounted root filesystem /dev/md127 [ 1.937620] dracut: Switching root
-- xen mailing list xen@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/xen