network problem after upgrade...
by John Sanabria
hi,
i had two machines (shutdown and init) dedicated as domain0 with fc6 and
xen installed. Both machines has guest domains deployed. Last days, i
decided to update the shutdown machine with kernel and xen packages, using
update software tool (aka. pup). As consequence my old guest domains in
shutdown machine has network problems, cannot communicate outside, then i
decide to deploy a new guest domain, after to updating process, and it
does not have any problems. The problem appear with old guest domains. :-(
But, the old guest domains in init machine (with no updates) work properly.
any suggestion? thanks a lot.
init xen-packages and kernel running version
kernel-xen.i686 2.6.19-1.2911.6.5.fc6 installed
kernel-xen.i686 2.6.18-1.2798.fc6 installed
xen.i386 3.0.3-6.fc6 installed
xen-libs.i386 3.0.3-6.fc6 installed
(uname -a) Linux init 2.6.19-1.2911.6.5.fc6xen #1 SMP Sun Mar 4 16:59:41
EST 2007 i686 i686 i386 GNU/Linux
shutdown xen-packages and kernel running version
kernel-xen.i686 2.6.20-1.2952.fc6 installed
kernel-xen.i686 2.6.19-1.2911.6.4.fc6 installed
xen.i386 3.0.3-9.fc6 installed
xen-libs.i386 3.0.3-9.fc6 installed
(uname -a) Linux shutdown 2.6.19-1.2911.6.4.fc6xen #1 SMP Sat Feb 24
14:57:17 EST 2007 i686 i686 i386 GNU/Linux
http://ece.uprm.edu/~s047267
http://del.icio.us/josanabr
http://blog-grid.blogspot.com
16 years, 10 months
XEN-3.0.3 on RHEL-5, fully virtualized guest of RH72 won't start after install finishes.
by Ben Russo
I have many boxes running rh-7.2
(these are stripped down, minimal installs, for appliances on a private
network that isn't routable) I want to run VIRTUAL images of the
same setup for testing purposes.
I read the Fedora 6 XEN getting started guide and skimmed through the
FAQ. I browsed through this mailing list to see if I could find my
problem here as well. No luck.
I have a Dell-2950 with Quad Core XEON processors, PAE, VMX, and it is
enabled in BIOS. 8GB RAM, 2GB assigned to Dom0
Booted into RHEL-5 Xen kernel, installed all the latest patches as of
6/11/2007, and rebooted.
Then Started Virtual Machine Manager GUI
Selected "New..." from File menu and followed the wizard.
then installed FULLY VIRTUALIZED
RH-72 from original Red Hat 7.2 CD's
this went fine with the
Virtual Machine Manager GUI "New Machine" wizard.
The only non-usual thing I did for an RH72 install was
to give it the kernel boot option mem=500M
After the install completed, the DomU guest said it was now going to
reboot and I should remove any CD's.
Then the DomU disappeared.
It took me forever to figure out that I couldn't use the virt-manager
GUI to restore a DomU configuration file. There really should be
a more intuitive way for this to work. I am not a dummy, and it took
me forever to figure out how to start the DomU again.
Now that I figured out that I have to go to a command line prompt and
type "xm create -c /etc/xen/rh72-test",
I find out that the new guest gets a kernel panic on bootup
after the bootup menu
Unfortunately the messages scroll by really fast, and I can't catch
them all, but at the end, the last page visible in the VNC console
says:
====================================================================
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Unable to handle kernel paging request at virtual address ffffffff
printing eip:
c0204a00
*pde = 00001063
*pte = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0204a00>]
EFLAGS: 00010202
eax: fffffff ebx: 00000000 ecx: 00000004 edx: 00000004
esi: fffffff edi: c0229972 ebp: 0008e000 esp: c0257fb4
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0257000)
Stack: c026d6e8 0000000 c024....
...
...
Call Trace: [<....
Code: f3 a6 ...
<0>Kernel panic: Attempted to kill the idle task!
In idle task - not syncing
====================================================================
The console where I ran the "xm create..." command shows nothing out
of the ordinary.
xm dmesg shows: ####### START xm dmesg #############
(XEN) (file=hvm.c, line=197) Allocated port 3 for hvm.
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83fc
(pseudophys a0): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83fb
(pseudophys a1): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83fa
(pseudophys a2): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f9
(pseudophys a3): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f8
(pseudophys a4): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f7
(pseudophys a5): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f6
(pseudophys a6): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f5
(pseudophys a7): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f4
(pseudophys a8): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f3
(pseudophys a9): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f2
(pseudophys aa): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f1
(pseudophys ab): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83f0
(pseudophys ac): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83ef
(pseudophys ad): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83ee
(pseudophys ae): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83ed
(pseudophys af): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83ec
(pseudophys b0): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83eb
(pseudophys b1): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83ea
(pseudophys b2): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e9
(pseudophys b3): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e8
(pseudophys b4): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e7
(pseudophys b5): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e6
(pseudophys b6): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e5
(pseudophys b7): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e4
(pseudophys b8): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e3
(pseudophys b9): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e2
(pseudophys ba): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e1
(pseudophys bb): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83e0
(pseudophys bc): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83df
(pseudophys bd): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83de
(pseudophys be): count=2 type=0
(XEN) (file=memory.c, line=188) Dom7 freeing in-use page a83dd
(pseudophys bf): count=2 type=0
(XEN) vmx_do_launch(): GUEST_CR3<=001adda0, HOST_CR3<=001adca0
(XEN) (GUEST: 7) HVM Loader
(XEN) (GUEST: 7) Detected Xen v3.0.3-rc5-8.1.4.el
(XEN) (GUEST: 7) Writing SMBIOS tables ...
(XEN) (GUEST: 7) Loading ROMBIOS ...
(XEN) (GUEST: 7) Creating MP tables ...
(XEN) (GUEST: 7) Loading Cirrus VGABIOS ...
(XEN) (GUEST: 7) Loading ACPI ...
(XEN) (GUEST: 7) Loading VMXAssist ...
(XEN) (GUEST: 7) VMX go ...
(XEN) (GUEST: 7) VMXAssist (Mar 8 2007)
(XEN) (GUEST: 7) Memory size 500 MB
(XEN) (GUEST: 7) E820 map:
(XEN) (GUEST: 7) 0000000000000000 - 000000000009F000 (RAM)
(XEN) (GUEST: 7) 000000000009F000 - 00000000000A0000 (Reserved)
(XEN) (GUEST: 7) 00000000000A0000 - 00000000000C0000 (Type 16)
(XEN) (GUEST: 7) 00000000000F0000 - 0000000000100000 (Reserved)
(XEN) (GUEST: 7) 0000000000100000 - 000000001F3F0000 (RAM)
(XEN) (GUEST: 7) 000000001F3F0000 - 000000001F3FA000 (ACPI Data)
(XEN) (GUEST: 7) 000000001F3FA000 - 000000001F3FD000 (ACPI NVS)
(XEN) (GUEST: 7) 000000001F3FD000 - 000000001F3FE000 (Type 19)
(XEN) (GUEST: 7) 000000001F3FE000 - 000000001F3FF000 (Type 18)
(XEN) (GUEST: 7) 000000001F3FF000 - 000000001F400000 (Type 17)
(XEN) (GUEST: 7) 00000000FEC00000 - 0000000100000000 (Type 16)
(XEN) (GUEST: 7)
(XEN) (GUEST: 7) Start BIOS ...
(XEN) (GUEST: 7) Starting emulated 16-bit real-mode: ip=F000:FFF0
(XEN) (GUEST: 7) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
(XEN) (GUEST: 7) Remapping master: ICW2 0x8 -> 0x20
(XEN) (GUEST: 7) Remapping slave: ICW2 0x70 -> 0x28
(XEN) (GUEST: 7) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
vruppert Exp $
(XEN) (GUEST: 7) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
2005/05/07 15: 55:26 $
(XEN) (GUEST: 7)
(XEN) (GUEST: 7) ata0-0: PCHS=12190/16/63 translation=none LCHS=1024/16/63
(XEN) (GUEST: 7) ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (6000 MBytes)
(XEN) (GUEST: 7) ata0 slave: Unknown device
(XEN) (GUEST: 7)
(XEN) (GUEST: 7) Booting from Hard Disk...
(XEN) (GUEST: 7) int13_harddisk: function 41, unmapped device for ELDL=81
(XEN) (GUEST: 7) int13_harddisk: function 08, unmapped device for ELDL=81
(XEN) (GUEST: 7) *** int 15h function AX=00C0, BX=0000 not yet supported!
(XEN) (GUEST: 7) int13_harddisk: function 15, unmapped device for ELDL=81
(XEN) (GUEST: 7) KBD: unsupported int 16h function 03
(XEN) (GUEST: 7) int13_harddisk: function 15, unmapped device for ELDL=81
################## end xm dmesg
There is nothing in /var/log/xen/xend-debug.log
This is what is in the /var/log/xen/xend.log
##### START xend.log
[2007-06-11 17:31:21 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:190) XendDomainInfo.create(['vm', ['name',
'rh72_test1'], ['memory', '500'], ['on_reboot', 'restart'], ['on_crash',
'restart'], ['vcpus', 1], ['uuid',
'f7dff459-6b52-4d6f-d40f-087cdbf08b05'], ['image', ['hvm', ['kernel',
'/usr/lib/xen/boot/hvmloader'], ['device_model',
'/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'],
['serial', 'pty'], ['vnc', 1], ['vncunused', 1], ['display', ':0.0'],
['xauthority', '/tmp/.gdm82ZSTT'], ['acpi', 1], ['apic', 1],
['vncpasswd', None]]], ['device', ['vbd', ['uname',
'file:/opt/xen-machines/rh72-test/rh72_test1.disk1'], ['dev', 'hda'],
['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac',
'00:16:3e:26:f0:37'], ['type', 'ioemu']]], ['device', ['vkbd']],
['device', ['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority',
'/tmp/.gdm82ZSTT'], ['display', ':0.0']]]])
[2007-06-11 17:31:21 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:296) parseConfig: config is ['vm', ['name',
'rh72_test1'], ['memory', '500'], ['on_reboot', 'restart'], ['on_crash',
'restart'], ['vcpus', 1], ['uuid',
'f7dff459-6b52-4d6f-d40f-087cdbf08b05'], ['image', ['hvm', ['kernel',
'/usr/lib/xen/boot/hvmloader'], ['device_model',
'/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1], ['boot', 'c'],
['serial', 'pty'], ['vnc', 1], ['vncunused', 1], ['display', ':0.0'],
['xauthority', '/tmp/.gdm82ZSTT'], ['acpi', 1], ['apic', 1],
['vncpasswd', None]]], ['device', ['vbd', ['uname',
'file:/opt/xen-machines/rh72-test/rh72_test1.disk1'], ['dev', 'hda'],
['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac',
'00:16:3e:26:f0:37'], ['type', 'ioemu']]], ['device', ['vkbd']],
['device', ['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority',
'/tmp/.gdm82ZSTT'], ['display', ':0.0']]]]
[2007-06-11 17:31:21 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:397) parseConfig: result is {'shadow_memory': None,
'start_time': None, 'uuid': 'f7dff459-6b52-4d6f-d40f-087cdbf08b05',
'on_crash': 'restart', 'on_reboot': 'restart', 'localtime': None,
'image': ['hvm', ['kernel', '/usr/lib/xen/boot/hvmloader'],
['device_model', '/usr/lib/xen/bin/qemu-dm'], ['pae', 1], ['vcpus', 1],
['boot', 'c'], ['serial', 'pty'], ['vnc', 1], ['vncunused', 1],
['display', ':0.0'], ['xauthority', '/tmp/.gdm82ZSTT'], ['acpi', 1],
['apic', 1], ['vncpasswd', None]], 'on_poweroff': None,
'bootloader_args': None, 'cpus': None, 'name': 'rh72_test1', 'backend':
[], 'vcpus': 1, 'cpu_weight': None, 'features': None, 'vcpu_avail':
None, 'memory': 500, 'device': [('vbd', ['vbd', ['uname',
'file:/opt/xen-machines/rh72-test/rh72_test1.disk1'], ['dev', 'hda'],
['mode', 'w']]), ('vif', ['vif', ['bridge', 'xenbr0'], ['mac',
'00:16:3e:26:f0:37'], ['type', 'ioemu']]), ('vkbd', ['vkbd']), ('vfb',
['vfb', ['vncunused', '1'], ['type', 'vnc'], ['xauthority',
'/tmp/.gdm82ZSTT'], ['display', ':0.0']])], 'bootloader': None, 'cpu':
None, 'maxmem': None}
[2007-06-11 17:31:21 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:1264) XendDomainInfo.construct: None
[2007-06-11 17:31:22 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:1296) XendDomainInfo.initDomain: 7 1.0
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: boot, val: c
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: fda, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: fdb, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: soundhw, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: localtime, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: serial, val: pty
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: std-vga, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: isa, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: vcpus, val: 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: acpi, val: 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: usb, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: usbdevice, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (image:329) args: k, val: None
[2007-06-11 17:31:22 xend 3251] DEBUG (balloon:127) Balloon: 6216092 KiB
free; need 528560; done.
[2007-06-11 17:31:22 xend 3251] INFO (image:136) buildDomain os=hvm
dom=7 vcpus=1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:282) dom = 7
[2007-06-11 17:31:22 xend 3251] DEBUG (image:283) image =
/usr/lib/xen/boot/hvmloader
[2007-06-11 17:31:22 xend 3251] DEBUG (image:284) store_evtchn = 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:285) memsize = 500
[2007-06-11 17:31:22 xend 3251] DEBUG (image:286) vcpus = 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:287) pae = 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:288) acpi = 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:289) apic = 1
[2007-06-11 17:31:22 xend 3251] DEBUG (image:435) hvm shutdown watch
registered
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:110) DevController:
writing {'backend-id': '0', 'virtual-device': '768', 'device-type':
'disk', 'state': '1', 'backend': '/local/domain/0/backend/vbd/7/768'} to
/local/domain/7/device/vbd/768.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:112) DevController:
writing {'domain': 'rh72_test1', 'frontend':
'/local/domain/7/device/vbd/768', 'dev': 'hda', 'state': '1', 'params':
'/opt/xen-machines/rh72-test/rh72_test1.disk1', 'mode': 'w', 'online':
'1', 'frontend-id': '7', 'type': 'file'} to
/local/domain/0/backend/vbd/7/768.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:110) DevController:
writing {'state': '1', 'backend-id': '0', 'backend':
'/local/domain/0/backend/vif/7/0'} to /local/domain/7/device/vif/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:112) DevController:
writing {'bridge': 'xenbr0', 'domain': 'rh72_test1', 'handle': '0',
'script': '/etc/xen/scripts/vif-bridge', 'state': '1', 'frontend':
'/local/domain/7/device/vif/0', 'mac': '00:16:3e:26:f0:37', 'online':
'1', 'frontend-id': '7', 'type': 'ioemu'} to
/local/domain/0/backend/vif/7/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:110) DevController:
writing {'state': '1', 'backend-id': '0', 'backend':
'/local/domain/0/backend/vkbd/7/0'} to /local/domain/7/device/vkbd/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:112) DevController:
writing {'frontend-id': '7', 'domain': 'rh72_test1', 'frontend':
'/local/domain/7/device/vkbd/0', 'state': '1', 'online': '1'} to
/local/domain/0/backend/vkbd/7/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:110) DevController:
writing {'state': '1', 'backend-id': '0', 'backend':
'/local/domain/0/backend/vfb/7/0'} to /local/domain/7/device/vfb/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (DevController:112) DevController:
writing {'vncunused': '1', 'domain': 'rh72_test1', 'frontend':
'/local/domain/7/device/vfb/0', 'xauthority': '/tmp/.gdm82ZSTT',
'state': '1', 'online': '1', 'frontend-id': '7', 'type': 'vnc',
'display': ':0.0'} to /local/domain/0/backend/vfb/7/0.
[2007-06-11 17:31:22 xend 3251] DEBUG (vfbif:92) No VNC passwd
configured for vfb access
[2007-06-11 17:31:22 xend 3251] INFO (image:418) spawning device models:
/usr/lib/xen/bin/qemu-dm ['/usr/lib/xen/bin/qemu-dm', '-d', '7', '-m',
'500', '-boot', 'c', '-serial', 'pty', '-vcpus', '1', '-acpi',
'-domain-name', 'rh72_test1', '-net',
'nic,vlan=1,macaddr=00:16:3e:26:f0:37,model=rtl8139', '-net',
'tap,vlan=1,bridge=xenbr0', '-vncunused', '-vnclisten', '127.0.0.1']
[2007-06-11 17:31:22 xend 3251] INFO (image:420) device model pid: 6463
[2007-06-11 17:31:22 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:715) Storing VM details: {'shadow_memory': '3', 'uuid':
'f7dff459-6b52-4d6f-d40f-087cdbf08b05', 'on_reboot': 'restart',
'start_time': '1181597482.26', 'on_poweroff': 'destroy', 'name':
'rh72_test1', 'xend/restart_count': '0', 'vcpus': '1', 'vcpu_avail':
'1', 'memory': '500', 'on_crash': 'restart', 'image': "(hvm (kernel
/usr/lib/xen/boot/hvmloader) (device_model /usr/lib/xen/bin/qemu-dm)
(pae 1) (vcpus 1) (boot c) (serial pty) (vnc 1) (vncunused 1) (display
:0.0) (xauthority /tmp/.gdm82ZSTT) (acpi 1) (apic 1) (vncpasswd
'None'))", 'maxmem': '500'}
[2007-06-11 17:31:22 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:750) Storing domain details: {'console/port': '2',
'name': 'rh72_test1', 'console/limit': '1048576', 'vm':
'/vm/f7dff459-6b52-4d6f-d40f-087cdbf08b05', 'domid': '7',
'cpu/0/availability': 'online', 'memory/target': '512000',
'store/ring-ref': '757982', 'store/port': '1'}
[2007-06-11 17:31:22 xend 3251] DEBUG (image:458) hvm_shutdown fired,
shutdown reason=None
[2007-06-11 17:31:22 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:940) XendDomainInfo.handleShutdownWatch
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices vif.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:149) Waiting for 0.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:471)
hotplugStatusCallback /local/domain/0/backend/vif/7/0/hotplug-status.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:485)
hotplugStatusCallback 1.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices usb.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices vbd.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:149) Waiting for 768.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:471)
hotplugStatusCallback /local/domain/0/backend/vbd/7/768/hotplug-status.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:471)
hotplugStatusCallback /local/domain/0/backend/vbd/7/768/hotplug-status.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:485)
hotplugStatusCallback 1.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices irq.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices vkbd.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:149) Waiting for 0.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:471)
hotplugStatusCallback /local/domain/0/backend/vkbd/7/0/hotplug-status.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:485)
hotplugStatusCallback 1.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices vfb.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:149) Waiting for 0.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:471)
hotplugStatusCallback /local/domain/0/backend/vfb/7/0/hotplug-status.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:485)
hotplugStatusCallback 1.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices pci.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices ioports.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices tap.
[2007-06-11 17:31:23 xend 3251] DEBUG (DevController:143) Waiting for
devices vtpm.
[2007-06-11 17:31:23 xend 3251] INFO (XendDomain:370) Domain rh72_test1
(7) unpaused.
[2007-06-11 17:41:01 xend 3251] DEBUG (image:458) hvm_shutdown fired,
shutdown reason=halt
[2007-06-11 17:41:01 xend.XendDomainInfo 3251] INFO (XendDomainInfo:899)
Domain has shutdown: name=rh72_test1 id=7 reason=halt.
[2007-06-11 17:41:01 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:1463) XendDomainInfo.destroy: domid=7
[2007-06-11 17:41:01 xend.XendDomainInfo 3251] DEBUG
(XendDomainInfo:1471) XendDomainInfo.destroyDomain(7)
[2007-06-11 17:41:01 xend 3251] DEBUG (image:447) hvm shutdown watch
unregistered
########### end xend.log
My config file looks like this:
[root@testxen xen]# cat /etc/xen/rh72_test1
# Automatically generated xen config file
name = "rh72_test1"
builder = "hvm"
memory = "500"
disk = [ 'file:/opt/xen-machines/rh72-test/rh72_test1.disk1,hda,w', ]
vif = [ 'type=ioemu, mac=00:16:3e:26:f0:37, bridge=xenbr0', ]
uuid = "f7dff459-6b52-4d6f-d40f-087cdbf08b05"
device_model = "/usr/lib/xen/bin/qemu-dm"
kernel = "/usr/lib/xen/boot/hvmloader"
#kernel = "/opt/xen-machines/rh72-test/vmlinuz-2.4.7-10"
#ramdisk = "/opt/xen-machines/rh72-test/initrd-2.4.7-10.img"
vnc=1
vncunused=1
apic=1
acpi=1
pae=1
vcpus=1
serial = "pty" # enable serial console
on_reboot = 'restart'
on_crash = 'restart'
#--- END CONFIG FILE
Any ideas?
I would have thought that a fully virtualized host would be pretty
foolproof?
16 years, 10 months
multiple CD ISO image files with qemu-kvm and virt-manager on F7
by Chris Young
I can't seem to get access to the qemu monitor console to change the
location of the cdrom and point it to the next iso image file using
virt-manager. Ctrl-Alt-2 sends me to the serial0 console and Ctrl-Alt-3
sends me to the parallel0 console, both of which don't respond to
keyboard events as far as I can tell.
Is there any other way of connecting to the qemu monitor console?
--
Chris Young
President
Cascadia Software
tel 253-896-4000 x103
cel 425-260-4942
cyoung(a)cascadiasoftware.com
http://cascadiasoftware.com
16 years, 10 months
can't create domU after failed install
by Ranbir
Hello Everyone,
I'm trying to use virt-install for the first time to create a
paravirtualized CentOS 5 domU on a Fedora Core 6 dom0. Here's the
command I used:
virt-install -n pbx -r 256 --vcpus=1 -m 00:16:3E:66:94:5D --vnc krs -p
-l http://blizzard/mirror/centos/5/os/i386
I'm then prompted to enter the disk I want to use, at which point I
enter "/dev/vg00/asterisk" (a LV I previously created). At this point,
the install appears to start, but eventually fails, giving this reason:
Starting install...
ERROR: Domain named pbx already exists!
There was a "pbx" config file in /etc/xen, but even after deleting it, I
get the same error when I try to recreate the domU.
I assume I can clear this from "memory", but how? Rebooting dom0
doesn't help, so I'm assuming virt-install is pulling that info from
somewhere.
Regards,
Ranbir
--
Kanwar Ranbir Sandhu
Linux 2.6.20-1.2944.fc6 i686 GNU/Linux
21:11:04 up 5 days, 11:59, 5 users, load average: 0.71, 0.64, 0.54
16 years, 10 months
fedora core 7 and Xen
by Edward Pasek
After numerous attempts to get anything running as a guest OS I continue
to run into errors. I have tried each install method atleast 4 times
from the quickstart guide. So far my results under fedora 7 and Xen have
failed. So far if I try to install core 6 or fedora 7 i386 I get kernel
panics and this dump
┌────────┤ Loading SCSI driver
├─────────┐
│
│
│ Loading xenblk driver...Oops: 0000
[#1]│
SMP │
│
last sysfs file:
└────────────────────────────────────────┘
Modules linked in: xenblk xennet iscsi_tcp libiscsi scsi_transport_iscsi
sr_mod sd_mod scsi_mod ide_cd cdrom ipv6 squashfs pcspkr loop nfs
nfs_acl fscache lockd sunrpc vfat fat cramfs
CPU:
0
EIP: 0061:[<ee1a4bb4>] Not tainted
VLI
EFLAGS: 00010887 (2.6.18-1.2798.fc6xen
#1)
EIP is at blkif_int+0x5a/0x16b
[xenblk]
eax: 18009c00 ebx: ed736000 ecx: c1948e0c edx:
00000002
esi: 00000000 edi: ca000100 ebp: ed7210ac esp:
c078afa0
ds: 007b es: 007b ss:
0069
Process init (pid: 225, ti=c078a000 task=c1946660
task.ti=c1948000)screen
Stack: f72a0aa6 00000001 00000002 00000000 fffee3b3 c0e2dd80 00000000
00000000
00000106 c0441be6 c1948e0c c06d3700 00000106 c1948e0c c06d3728
c0441ca6
c0735f80 c1948e0c c0e2dd80 c1948dd0 00000106 c1948e0c fffffffe
c0406ca8
Call Trace:
[<c0441be6>] handle_IRQ_event+0x27/0x51
[<c0441ca6>] __do_IRQ+0x96/0xf2
[<c0406ca8>] do_IRQ+0x9e/0xbc
=======================
Code: e8 89 f6 8b 43 20 89 44 24 04 e9 c3 00 00 00 8b 43 24 31 f6 48 23
44 24 04 6b c0 6c 8d 68 40 03 6b 28 8b 7d 00 69 c7 9c 00 00 00 <8b> 94
18 e8 00 00 00 8d 44 18 7c 89 44 24 10 89 14 24 eb 12 8b
EIP: [<ee1a4bb4>] blkif_int+0x5a/0x16b [xenblk] SS:ESP 0069:c
if I install the x86_64 it just hangs and I get this in xm dmesg
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to
switch input to Xen).
(XEN) grant_table.c:265:d0 Bad flags (0) or dom (0). (expected dom 0)
I've disabled selinux, tried building my image in /var/lib/xen/images/
and several other places. I've removed and reinstalled xen virt-maanger
kernel-xen, I've tried an upgrade from 6-7, changed settings in my
config for cpus, mem, ethernet bridging.
I'm running Xen on a dell 2900 with 4 Xeons (x86_64) with the vt flags,
8 gb ram and a 1000 gigs of disk space.
16 years, 10 months
Formatting pauses during install
by Tarun Reddy
I'm using Centos 5 dom0 on an x86_64 machine with 12GB of RAM.
Tried to use virt-manager to install a Centos 4 domU (also tried with
Centos 5 domU) but the tool limits the disk to 16000 MB. So switch to
using virt-install and specified an 80GB disk. Everything proceed
well until "Formatting / file system" which stops at 11% (~8GB of the
74GB / partition).
Are there hard limits here that I'm missing?
Thank you,
Tarun
Rally Software
16 years, 10 months
F7 guest on a F7 host
by Greg Huber
I'm trying to install a F7 guest on a fresh F7 host.
I get all the way through virt-install and then open the guest.
I see a blip of text and then the screen goes blank and nothing
further happens, no disk or CDROM activity, and certainly no
install screen. After I 'shutdown' and 'run' I get....
HVMAssist BIOS, 1 cpu, $Revision: 1.38 $ $Date: 2005/05/07 15:55:26 $
ata0 master: QEMU HARDDISK ATA-7 Hard-Disk (16400 MBytes)
ata0 slave: Unknown device
Booting from Hard Disk
Boot from Hard Disk failed: not a bootable disk
FATAL: No Bootable device.
Which I assume means that nothing got loaded to the guest.
The same happens in text mode also.
If, however, I use a Fedora Core 6 install disk or a Windows XP install
disk,
I can complete the install.
I used the F7 install disk to build the host system and the media has been
checked. I also tried NFS mounting the image from another machine.
Thank You.
--
Greg Huber
Principal Engineer
Vanteon Corporation
255 Woodcliff Drive, Suite 200
Fairport, NY 14450
Office: (585) 419-9564
Fax: (585) 248-0537
www.vanteon.com <http://www.vanteon.com> - Embedded for Your Future
16 years, 10 months
Making Xen Guest Console Bigger
by Robert L Cochran
I'm brand new to using Xen. I've just successfully installed Fedora 7 as
a guest system named F7guest with 618 Mb of memory and approximately 35
Gb of disk space. How do I make the console bigger so that I can
actually work on applications? The default console is way too small --
the whole desktop window is about 6X6 inches. I need the actual desktop
and application windows to fill my 19" monitor and be resizeable for
them to be any good to me.
Thanks
Bob Cochran
Greenbelt, Maryland, USA
16 years, 10 months
Xen kernel missing drivers?
by Steve Brueckner
I have a Dell Optiplex 745, which is new enough that it uses the Intel 965
chipset and SATA optical drives. Due to this newness, no Fedora versions
prior to 7 will even install on it. I believe this is because of drivers
missing in Anaconda.
Anyway, Fedora 7 will install, but when I install the Xen rpms
(xen-3.1.0-0.rc7.1.rc7 and kernel-xen.2.6.20-2925.9.fc7) and try to reboot
using the xen kernel, the machine freezes. It freezes shortly after a
series of timeouts and errors that look like this:
ata1.00: qc timeout (cmd 0xef)
ata1.00: failed to set xfermode (err_mask=0x4)
ata1.00: limiting speed to PIO0
failed to recover some devices, retrying in 5 secs
ata1.00: disabled
(repeat above series a few times)
ata2.00... (similar set of errors)
...
No volume groups found
VG_host not found
Why might the standard Fedora7 kernel work OK, but the Fedora7 xen kernel
not work? Is it perhaps because of missing drivers in the xen kernel?
How can I fix this problem? Do I need to give up on the xen rpms, and try
to compile xen from source, but using the Fedora7 kernel instead of a
vanilla Linux kernel?
Thanks for any thoughts.
Steve Brueckner, ATC-NY
16 years, 10 months