1:54 p.m.
Greetings,
I am trying to set up cobbler repos for Fedora 17 using the instructions
provided here:
https://github.com/cobbler/cobbler/wiki/Manage%20yum%20repos
I am attaching the output of 'cobbler report' so you can see my repo
definitions. See file mycobbler.report.txt, attached.
When I attempt to do a 'cobbler reposync' I get the error message listed
in file 'mycobbler.reposync.error.txt', also attached.
I then do a 'cobbler repo edit' to change the name of the URL string so
that 'http://' is prepended. See file mycobbler.report2.txt, also attached.
After editing the URL string, I get the error message text you see here,
in file 'mycobbler.reposync.error2.txt', also attached.
How do I fix this problem?
Thanks
Bob
2:10 p.m.
On Fri, Jun 29, 2012 at 1:54 PM, Bob Cochran <bcochran13(a)verizon.net> wrote:
Greetings,
I am trying to set up cobbler repos for Fedora 17 using the instructions
provided here:
https://github.com/cobbler/cobbler/wiki/Manage%20yum%20repos
I am attaching the output of  'cobbler report'  so you can see my repo
definitions. See file mycobbler.report.txt, attached.
When I attempt to do a 'cobbler reposync' I get the error message listed in
file 'mycobbler.reposync.error.txt', also attached.
I then do a 'cobbler repo edit' to change the name of the URL string so that
'http://' is prepended. See file mycobbler.report2.txt, also attached.
After editing the URL string, I get the error message text you see here, in
file 'mycobbler.reposync.error2.txt', also attached.
It would seem, based on this error, that the issue is the remote repo
(from your second error output):
Exception value: Damaged repomd.xml file
So it looks like you're doing it right, it's just that the remote repo
has an error.
2:45 p.m.
On 6/29/12 3:10 PM, James Cammarata wrote:
On Fri, Jun 29, 2012 at 1:54 PM, Bob
Cochran<bcochran13(a)verizon.net> wrote:
> Greetings,
>
> I am trying to set up cobbler repos for Fedora 17 using the instructions
> provided here:
>
> https://github.com/cobbler/cobbler/wiki/Manage%20yum%20repos
>
> I am attaching the output of 'cobbler report' so you can see my repo
> definitions. See file mycobbler.report.txt, attached.
>
> When I attempt to do a 'cobbler reposync' I get the error message listed in
> file 'mycobbler.reposync.error.txt', also attached.
>
> I then do a 'cobbler repo edit' to change the name of the URL string so that
> 'http://' is prepended. See file mycobbler.report2.txt, also attached.
>
> After editing the URL string, I get the error message text you see here, in
> file 'mycobbler.reposync.error2.txt', also attached.
It would seem, based on this error, that the issue is the remote repo
(from your second error output):
Exception value: Damaged repomd.xml file
So it looks like you're doing it right, it's just that the remote repo
has an error.
I tried changing mirrors:
Name : f17-x86_64-everything
Arch : x86_64
Breed : yum
Comment :
Createrepo Flags : <<inherit>>
Environment Variables : {}
Keep Updated : True
Mirror :
http://fedora.mirrors.tds.net/pub/fedora/releases/17/Everything/x86_64/os...
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
Name : f17-x86_64-updates
Arch : x86_64
Breed : yum
Comment :
Createrepo Flags : <<inherit>>
Environment Variables : {}
Keep Updated : True
Mirror :
http://mirror.umd.edu/fedora/linux/updates/17/x86_64/repodata/
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
and then redoing 'cobbler reposync':
[root@cobbler1 ~]# cobbler reposync
task started: 2012-06-29_153656_reposync
task started (id=Reposync, time=Fri Jun 29 15:36:56 2012)
hello, reposync
run, reposync, run!
creating:
/var/www/cobbler/repo_mirror/f17-x86_64-everything/.origin/f17-x86_64-everything.repo
running: /usr/bin/reposync -l -m -d
--config=/var/www/cobbler/repo_mirror/f17-x86_64-everything/.origin/f17-x86_64-everything.repo
--repoid=f17-x86_64-everything
--download_path=/var/www/cobbler/repo_mirror -a x86_64
received on stdout:
received on stderr: Error setting up repositories: Cannot retrieve
repository metadata (repomd.xml) for repository: f17-x86_64-everything.
Please verify its path and try again
Exception occured: <class 'cobbler.cexceptions.CX'>
Exception value: 'cobbler reposync failed'
Exception Info:
File "/usr/lib/python2.6/site-packages/cobbler/utils.py", line 131,
in die
raise CX(msg)
Exception occured: <class 'cobbler.cexceptions.CX'>
Exception value: 'cobbler reposync failed'
Exception Info:
File "/usr/lib/python2.6/site-packages/cobbler/action_reposync.py",
line 125, in run
self.sync(repo)
File "/usr/lib/python2.6/site-packages/cobbler/action_reposync.py",
line 169, in sync
return self.yum_sync(repo)
File "/usr/lib/python2.6/site-packages/cobbler/action_reposync.py",
line 402, in yum_sync
utils.die(self.logger,"cobbler reposync failed")
File "/usr/lib/python2.6/site-packages/cobbler/utils.py", line 139,
in die
raise CX(msg)
reposync failed, tries left: 0
Exception occured: <class 'cobbler.cexceptions.CX'>
Exception value: 'reposync failed, retry limit reached, aborting'
Exception Info:
File "/usr/lib/python2.6/site-packages/cobbler/utils.py", line 131,
in die
raise CX(msg)
Exception occured: <class 'cobbler.cexceptions.CX'>
Exception value: 'reposync failed, retry limit reached, aborting'
Exception Info:
File "/usr/lib/python2.6/site-packages/cobbler/remote.py", line 89,
in run
rc = self._run(self)
File "/usr/lib/python2.6/site-packages/cobbler/remote.py", line 251,
in runner
name=None, nofail=nofail, logger=self.logger)
File "/usr/lib/python2.6/site-packages/cobbler/api.py", line 758, in
reposync
return reposync.run(name)
File "/usr/lib/python2.6/site-packages/cobbler/action_reposync.py",
line 147, in run
utils.die(self.logger,"reposync failed, retry limit reached, aborting")
File "/usr/lib/python2.6/site-packages/cobbler/utils.py", line 139,
in die
raise CX(msg)
!!! TASK FAILED !!!
[root@cobbler1 ~]#
I can ping the 'Everything' mirror:
[root@cobbler1 ~]# ping -c 3 fedora.mirrors.tds.net
PING fedora.mirrors.tds.net (204.246.0.137) 56(84) bytes of data.
64 bytes from fedora.mirrors.tds.net (204.246.0.137): icmp_seq=1 ttl=251
time=14.9 ms
64 bytes from fedora.mirrors.tds.net (204.246.0.137): icmp_seq=2 ttl=251
time=14.6 ms
64 bytes from fedora.mirrors.tds.net (204.246.0.137): icmp_seq=3 ttl=251
time=14.4 ms
--- fedora.mirrors.tds.net ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2016ms
rtt min/avg/max/mdev = 14.429/14.661/14.950/0.257 ms
[root@cobbler1 ~]#
Help much appreciated...hopefully I'm just doing some stupid amateur
mistake thing!
Bob
3:10 p.m.
On 6/29/12 3:56 PM, James Cammarata wrote:
> Help much appreciated...hopefully I'm just doing some stupid
amateur mistake
> thing!
What distro/version are you reposyncing from? Fedora changed the
hashing algo from MD5 to SHA recently, so older yum versions have
issues trying to grab those.
I'm using CentOS 6.2:
[root@cobbler1 ~]# uname -a
Linux cobbler1.greenbeltcomputer.biz 2.6.32-220.23.1.el6.x86_64 #1 SMP
Mon Jun 18 18:58:52 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
[root@cobbler1 ~]# locate *centos*release
/etc/centos-release
[root@cobbler1 ~]# cat !$
cat *centos*release
cat: *centos*release: No such file or directory
[root@cobbler1 ~]# cat /etc/centos-release
CentOS release 6.2 (Final)
Bob
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler
3:16 p.m.
On 6/29/12 4:10 PM, Bob Cochran wrote:
On 6/29/12 3:56 PM, James Cammarata wrote:
>> Help much appreciated...hopefully I'm just doing some stupid amateur
>> mistake
>> thing!
> What distro/version are you reposyncing from? Fedora changed the
> hashing algo from MD5 to SHA recently, so older yum versions have
> issues trying to grab those.
I'm using CentOS 6.2:
[root@cobbler1 ~]# uname -a
Linux cobbler1.greenbeltcomputer.biz 2.6.32-220.23.1.el6.x86_64 #1 SMP
Mon Jun 18 18:58:52 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
[root@cobbler1 ~]# locate *centos*release
/etc/centos-release
[root@cobbler1 ~]# cat !$
cat *centos*release
cat: *centos*release: No such file or directory
[root@cobbler1 ~]# cat /etc/centos-release
CentOS release 6.2 (Final)
Bob
Here is the yum version I'm using:
Installed Packages
Name : yum
Arch : noarch
Version : 3.2.29
Release : 22.el6.centos.2
Bob
3:18 p.m.
On Fri, Jun 29, 2012 at 3:10 PM, Bob Cochran <bcochran13(a)verizon.net> wrote:
On 6/29/12 3:56 PM, James Cammarata wrote:
>>
>> Help much appreciated...hopefully I'm just doing some stupid amateur
>> mistake
>> thing!
>
> What distro/version are you reposyncing from? Fedora changed the
> hashing algo from MD5 to SHA recently, so older yum versions have
> issues trying to grab those.
I'm using CentOS 6.2:
[root@cobbler1 ~]# uname -a
Linux cobbler1.greenbeltcomputer.biz 2.6.32-220.23.1.el6.x86_64 #1 SMP Mon
Jun 18 18:58:52 BST 2012 x86_64 x86_64 x86_64 GNU/Linux
[root@cobbler1 ~]# locate *centos*release
/etc/centos-release
[root@cobbler1 ~]# cat !$
cat *centos*release
cat: *centos*release: No such file or directory
[root@cobbler1 ~]# cat /etc/centos-release
CentOS release 6.2 (Final)
I would try manually running the reposync command that it is printing
out there in your logs. If it doesn't work then, the issue is not
cobbler directly, but rather something else is going on preventing
reposync from getting a copy of the repo.
3 p.m.
Help much appreciated...hopefully I'm just doing some stupid amateur mistake
thing!
You probably need to setup the http proxy environment variable for yum to access external
repos.
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler
3:24 p.m.
On Fri, Jun 29, 2012 at 3:00 PM, Parthasarathy, Balaji (BCS,
Cupertino, USA) <balaji.parthasarathy(a)hp.com> wrote:
>
>Help much appreciated...hopefully I'm just doing some stupid amateur mistake
>thing!
You probably need to setup the http proxy environment variable for yum to access external
repos.
I believe this could be the case. I was actually looking at the wrong
error log before, the invalid repomd message occurred in the first
output, not the second. For the second, the message:
Error setting up repositories: Cannot retrieve repository metadata
(repomd.xml) for repository: f17-x86_64-everything. Please verify its
path and try again
is the important one. It would seem to indicate a connectivity issue.
As I said, try and run the reposync directly from the command line to
ascertain whether the issue is with cobbler or with the system
configuration overall. You can specify environment variables with
cobbler, so if you need to set a proxy you can do it there.
3:52 p.m.
On 6/29/12 4:24 PM, James Cammarata wrote:
On Fri, Jun 29, 2012 at 3:00 PM, Parthasarathy, Balaji (BCS,
Cupertino, USA)<balaji.parthasarathy(a)hp.com> wrote:
>> Help much appreciated...hopefully I'm just doing some stupid amateur mistake
>> thing!
> You probably need to setup the http proxy environment variable for yum to access
external repos.
I believe this could be the case. I was actually looking at the wrong
error log before, the invalid repomd message occurred in the first
output, not the second. For the second, the message:
Error setting up repositories: Cannot retrieve repository metadata
(repomd.xml) for repository: f17-x86_64-everything. Please verify its
path and try again
is the important one. It would seem to indicate a connectivity issue.
As I said, try and run the reposync directly from the command line to
ascertain whether the issue is with cobbler or with the system
configuration overall. You can specify environment variables with
cobbler, so if you need to set a proxy you can do it there.
I'm embarassed to admit that I don't understand what specific actions to
take here.
How do I run reposync directly on the command line? Do you mean this:
cobbler reposync
or do you mean some other command? I have been doing this from a
terminal window all along. My installation of CentOS 6.2 on that machine
is not X-based, there is no gui. I'm always in the shell.
Does reposync need to have specific firewall ports open? That could be
the issue.
How do I set up an http proxy environment variable? I know so little of
proxying that I am not sure why I may need this. The way this host is
set up, it talks to the dns server (which is on the same host.) There is
a second dns server on my network as well: it is at the gateway address,
at 192.168.1.1. The gateway is a Verizon "FiOS" router which talks to
the internet.
So I wonder if I need to open firewall ports? Set up the http proxy? Or
perhaps change something in the routing tables used by the gateway --
that is, the verizon FiOS box?
Thanks
Bob
3:58 p.m.
I'm embarassed to admit that I don't understand what specific
actions to
take here.
How do I run reposync directly on the command line? Do you mean this:
cobbler reposync
No problem. Reposync is actually a CLI command, cobbler just manages
running it for you. From the log you sent, the command it runs is the
following:
/usr/bin/reposync -l -m -d
--config=/var/www/cobbler/repo_mirror/f17-x86_64-everything/.origin/f17-x86_64-everything.repo
--repoid=f17-x86_64-everything
--download_path=/var/www/cobbler/repo_mirror -a x86_64
or do you mean some other command? I have been doing this from a
terminal
window all along. My installation of CentOS 6.2 on that machine is not
X-based, there is no gui. I'm always in the shell.
Does reposync need to have specific firewall ports open? That could be the
issue.
How do I set up an http proxy environment variable? I know so little of
proxying that I am not sure why I may need this. The way this host is set
up, it talks to the dns server (which is on the same host.) There is a
second dns server on my network as well: it is at the gateway address, at
192.168.1.1. The gateway is a Verizon "FiOS" router which talks to the
internet.
So I wonder if I need to open firewall ports? Set up the http proxy? Or
perhaps change something in the routing tables used by the gateway -- that
is, the verizon FiOS box?
Yes, you will need to open up at least port 80 (maybe 443) outbound
from the server you're trying to do this from.
5:01 p.m.
On 6/29/12 4:58 PM, James Cammarata wrote:
/usr/bin/reposync -l -m -d
--config=/var/www/cobbler/repo_mirror/f17-x86_64-everything/.origin/f17-x86_64-everything.repo
--repoid=f17-x86_64-everything
--download_path=/var/www/cobbler/repo_mirror -a x86_64
This errors out when I try it. I looked over the directory structure and
a thought occurs to me. Did cobbler create the directory tree with the
right owners and permissions? I wonder about that because here the repo
that cobbler made for me everything is owned by root instead of apache.root:
drwxrwxr-x. 3 apache root 4096 Jun 28 22:50 .
drwxrwxr-x. 11 apache root 4096 May 29 17:23 ..
drwxr-xr-x 3 root root 4096 Jun 28 22:50 f17-x86_64-everything
[root@cobbler1 repo_mirror]# pwd
/var/www/cobbler/repo_mirror
and as we dig further down we see more directories and files owned by root:
drwxr-xr-x 3 root root 4096 Jun 28 22:50 .
drwxrwxr-x. 3 apache root 4096 Jun 28 22:50 ..
drwxr-xr-x 2 root root 4096 Jun 28 23:11 .origin
and we see that repomd.xml itself is owned by root:
drwxr-xr-x 2 root root 4096 Jun 28 23:11 .
drwxr-xr-x 3 root root 4096 Jun 28 22:50 ..
-rw-r--r-- 1 root root 176 Jun 29 15:36 f17-x86_64-everything.repo
-rw-r--r-- 1 root root 0 Jun 29 14:29 repomd.xml
...so does ownership really need to be apache.root?
(Pardon my newbie stupidity)
Yes, you will need to open up at least port 80 (maybe 443) outbound
from the server you're trying to do this from.
These ports are definitely
open.
Bob
4:17 p.m.
How do I set up an http proxy environment variable?
From your terminal, try downloading the repomd.xml file manually using
wget
http://fedora.mirrors.tds.net/pub/fedora/releases/17/Everything/x86_64/os...
If that fails, it could be a proxy issue. To solve it, on RHEL and Fedora, doing the
following works:
1) create http_proxy entry in /etc/environment file
http_proxy= http://<proxy_server>:<proxy_port>
https_proxy=http://<proxy_server>:<proxy_port>
2) source the environment file in the shell where you are running the wget command (notice
the '.' at the beginning)
. /etc/environment
Then run the wget command again.
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler
4:43 p.m.
On 6/29/12 5:17 PM, Parthasarathy, Balaji (BCS, Cupertino, USA) wrote:
> How do I set up an http proxy environment variable?
> From your terminal, try downloading the repomd.xml file manually using
wget
http://fedora.mirrors.tds.net/pub/fedora/releases/17/Everything/x86_64/os...
The above works like a charm.
Thanks!
Bob
4:22 p.m.
On 6/29/2012 3:45 PM, Bob Cochran wrote:
On 6/29/12 3:10 PM, James Cammarata wrote:
> On Fri, Jun 29, 2012 at 1:54 PM, Bob Cochran<bcochran13(a)verizon.net> wrote:
>> Greetings,
>>
>> I am trying to set up cobbler repos for Fedora 17 using the instructions
>> provided here:
>>
>> https://github.com/cobbler/cobbler/wiki/Manage%20yum%20repos
>>
>> I am attaching the output of 'cobbler report' so you can see my repo
>> definitions. See file mycobbler.report.txt, attached.
>>
>> When I attempt to do a 'cobbler reposync' I get the error message listed
in
>> file 'mycobbler.reposync.error.txt', also attached.
>>
>> I then do a 'cobbler repo edit' to change the name of the URL string so
that
>> 'http://' is prepended. See file mycobbler.report2.txt, also attached.
>>
>> After editing the URL string, I get the error message text you see here, in
>> file 'mycobbler.reposync.error2.txt', also attached.
> It would seem, based on this error, that the issue is the remote repo
> (from your second error output):
>
> Exception value: Damaged repomd.xml file
>
> So it looks like you're doing it right, it's just that the remote repo
> has an error.
I tried changing mirrors:
Name : f17-x86_64-everything
Arch : x86_64
Breed : yum
Comment :
Createrepo Flags : <<inherit>>
Environment Variables : {}
Keep Updated : True
Mirror :
http://fedora.mirrors.tds.net/pub/fedora/releases/17/Everything/x86_64/os...
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
Name : f17-x86_64-updates
Arch : x86_64
Breed : yum
Comment :
Createrepo Flags : <<inherit>>
Environment Variables : {}
Keep Updated : True
Mirror :
http://mirror.umd.edu/fedora/linux/updates/17/x86_64/repodata/
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
and then redoing 'cobbler reposync':
Is that mirror path right? I don't have the /repodata/ part in mine.
I'm somewhat of a newbie to cobbler, so I don't know if that matters.
Tony Schreiner
4:48 p.m.
On 6/29/12 5:22 PM, Tony Schreiner wrote:
Mirror :
http://fedora.mirrors.tds.net/pub/fedora/releases/17/Everything/x86_64/os...
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
Name : f17-x86_64-updates
Arch : x86_64
Breed : yum
Comment :
Createrepo Flags :<<inherit>>
Environment Variables : {}
Keep Updated : True
Mirror :
http://mirror.umd.edu/fedora/linux/updates/17/x86_64/repodata/
Mirror locally : True
Owners : ['admin']
Priority : 99
RPM List : []
Yum Options : {}
and then redoing 'cobbler reposync':
Is that mirror path right? I don't have the /repodata/ part in mine.
I'm somewhat of a newbie to cobbler, so I don't know if that matters.
Tony Schreiner
Hi Tony,
Yes, the mirror path is correct. I basically walked down the path with
my browser, starting from the Fedora mirror list web page, to verify
that the path exists. Then I copied and pasted the path directly from
the browser address bar. (I ssh into the cobbler server from my Mac to
do a lot of my work with cobbler.)
Thanks
Bob
5:27 p.m.
>
> Is that mirror path right? I don't have the /repodata/ part in mine.
> I'm somewhat of a newbie to cobbler, so I don't know if that matters.
> Tony Schreiner
Hi Tony,
Yes, the mirror path is correct. I basically walked down the path with my browser,
starting from the Fedora mirror list web page, to verify that the path exists. Then
I copied and pasted the path directly from the browser address bar. (I ssh into the
cobbler server from my Mac to do a lot of my work with cobbler.)
Thanks
Bob
Bob,
I think Tony is correct. When giving a repo path to yum, you should exclude the
'repodata' sub directory. If a repo location is http://some_server/some_dir, yum
will look for the directory 'repodata' under that and try to find files like
'repomd.xml'. If you gave http://some_server/some_dir/repodata as the repo
location, yum will again look for a 'repodata' directory under that and fail since
it won't find it.
Balaji
_______________________________________________
cobbler mailing list
cobbler(a)lists.fedorahosted.org
https://fedorahosted.org/mailman/listinfo/cobbler
5:33 p.m.
On 6/29/12 6:27 PM, Parthasarathy, Balaji (BCS, Cupertino, USA) wrote:
>> Is that mirror path right? I don't have the /repodata/ part in mine.
>> I'm somewhat of a newbie to cobbler, so I don't know if that matters.
>> Tony Schreiner
> Hi Tony,
>
> Yes, the mirror path is correct. I basically walked down the path with my browser,
> starting from the Fedora mirror list web page, to verify that the path exists. Then
> I copied and pasted the path directly from the browser address bar. (I ssh into the
> cobbler server from my Mac to do a lot of my work with cobbler.)
>
> Thanks
>
> Bob
Bob,
I think Tony is correct. When giving a repo path to yum, you should exclude the
'repodata' sub directory. If a repo location is http://some_server/some_dir, yum
will look for the directory 'repodata' under that and try to find files like
'repomd.xml'. If you gave http://some_server/some_dir/repodata as the repo
location, yum will again look for a 'repodata' directory under that and fail since
it won't find it.
Balaji
Hi Balaji,
Thank you so much for telling me this! I will 'cobbler repo edit' the
repo URL and see what happens. Thank you for spotting my error!
Bob
5:40 p.m.
On 6/29/12 6:33 PM, Bob Cochran wrote:
On 6/29/12 6:27 PM, Parthasarathy, Balaji (BCS, Cupertino, USA)
wrote:
>
>>> Is that mirror path right? I don't have the /repodata/ part in mine.
>>> I'm somewhat of a newbie to cobbler, so I don't know if that
matters.
>>> Tony Schreiner
>> Hi Tony,
>>
>> Yes, the mirror path is correct. I basically walked down the path
>> with my browser,
>> starting from the Fedora mirror list web page, to verify that the
>> path exists. Then
>> I copied and pasted the path directly from the browser address bar.
>> (I ssh into the
>> cobbler server from my Mac to do a lot of my work with cobbler.)
>>
>> Thanks
>>
>> Bob
> Bob,
> I think Tony is correct. When giving a repo path to yum, you should
> exclude the 'repodata' sub directory. If a repo location is
> http://some_server/some_dir, yum will look for the directory
> 'repodata' under that and try to find files like 'repomd.xml'. If you
> gave http://some_server/some_dir/repodata as the repo location, yum
> will again look for a 'repodata' directory under that and fail since
> it won't find it.
>
> Balaji
Hi Balaji,
Thank you so much for telling me this! I will 'cobbler repo edit' the
repo URL and see what happens. Thank you for spotting my error!
Bob
Hi Balaji and Tony,
I think you both solved my problem! 'cobbler reposync' is now running
happily!
Thanks a ton!
Bob
4323
days inactive
4323
days old
cobbler@lists.fedorahosted.org
18 comments
4 participants
participants (4)
-
Bob Cochran -
James Cammarata -
Parthasarathy, Balaji (BCS, Cupertino, USA) -
Tony Schreiner