남은게 모두다 제것인데, 제가 보내드린 파일을 못 받으셨나봐요.
아래 다시 붙입니다.
그럼 다 된 것인가요?
# ========================================================
#: nss_db-2.1.92-1.i386.rpm:1005 nss_db-2.1.92-1.src.rpm:1005
Nss_db is a set of C library extensions which allow Berkeley Databases\n
to be used as a primary source of aliases, ethers, groups, hosts,\n
networks, protocol, users, RPCs, services, and shadow passwords\n
(instead of or in addition to using flat files or NIS). Install nss_db\n
if your flat name service files are too large and lookups are slow.
Nss_db는 (일반 파일이나 NIS 대신) 이메일 별칭 정보, 이더넷 정보, \n
호스트 이름 정보, 네트웍 정보, 프로토콜 정보, 사용자 정보, 원격함수호출
정보, \n
네트웍 포트 정보와 쉐도우 암호 정보를 저장하는 방법으로 버클리 데이터 \n
베이스가 사용될 수 있도록 해 주는 C 언어 확장 라이브러리입니다. \n
이름 정보 파일이 너무 커서 금방 참조되지 않는 다면 nss_db를 설치하세요.
# ========================================================
#: nss_db-2.1.92-1.src.rpm:1005 nss_db-compat-2.1.92-1.i386.rpm:1005
Nss_db-compat is a set of C library extensions which allow Berkeley\n
Databases to be used as a primary source of aliases, ethers, groups,\n
hosts, networks, protocol, users, RPCs, services, and shadow passwords\n
(instead of or in addition to using flat files or NIS) from programs\n
linked against glibc 2.0.x.
Nss_db는 (일반 파일이나 NIS 대신) 이메일 별칭 정보, 이더넷 정보, \n
호스트 이름 정보, 네트웍 정보, 프로토콜 정보, 사용자 정보, 원격함수호출
정보, \n
네트웍 포트 정보와 쉐도우 암호 정보를 저장하는 방법으로 버클리 데이터 \n
베이스가 사용될 수 있도록 해 주며, glibc 2.0.x 과 링크된 프로그램에서 \n
정보를 접근할 있게 해 주는 C 언어 확장 라이브러리입니다.
# ========================================================
#: nss_ldap-123-4.i386.rpm:1005 nss_ldap-123-4.src.rpm:1005
This package includes two LDAP access clients: nss_ldap and pam_ldap.\n
Nss_ldap is a set of C library extensions that allow X.500 and LDAP\n
directory servers to be used as a primary source of aliases, ethers,\n
groups, hosts, networks, protocol, users, RPCs, services, and shadow\n
passwords (instead of or in addition to using flat files or NIS).\n
\n
Pam_ldap is a module for Linux-PAM that supports password changes, V2\n
clients, Netscape's SSL, ypldapd, Netscape Directory Server password\n
policies, access authorization, and crypted hashes.
이 패키지는 nss_ldap과 pam_ldap, 두개의 LDAP 접근 클라이언트를 포함하고 \n
있습니다. nss_ldap은 (일반 파일이나 NIS 대신) 이메일 별칭 정보, \n
이더넷 정보, 호스트 이름 정보, 네트웍 정보, 프로토콜 정보, \n
사용자 정보, 원격함수호출 정보, 네트웍 포트 정보와 쉐도우 암호 정보를 \n
저장하는 방법으로 X.500 과 LDAP 디렉토리 서버를 사용할 수 있게 해 줍니다.
# ========================================================
#: ntp-4.0.99k-4.i386.rpm:1005 ntp-4.0.99k-4.src.rpm:1005
The Network Time Protocol (NTP) is used to synchronize a computer's\n
time with another reference time source. The ntp package contains\n
utilities and daemons that will synchronize your computer's time to\n
Coordinated Universal Time (UTC) via the NTP protocol and NTP servers.\n
The ntp package includes ntpdate (a program for retrieving the date\n
and time from remote machines via a network) and ntpd (a daemon which\n
continuously adjusts system time).\n
\n
Install the ntp package if you need tools for keeping your system's\n
time synchronized via the NTP protocol.
네트웍 타임 프로토콜(NTP)는 시스템의 시계를 외부 시간 참조 소스와\n
일치시켜 주는 프로그램입니다. ntp 패키지는 NTP프로토콜과 NTP서버를 통해서 \n
시스템의 시계을 세계 표준시(UTC)와 일치시켜주는 도구와 디먼으로 이루어져 \n
있습니다. ntpdate는 날짜와 시각정보를 원격 시스템에서 네트웍으로 가져오는\n
도구이고, ntpd는 지속적으로 시스템 시각을 조절하는 디먼입니다. \n
\n
NTP 프로토콜로 시스템의 시계를 일치시켜야 하는 도구가 필요하면 ntp 패키
지를\n
설치하세요.
# ========================================================
#: chkconfig-1.2.17-1.src.rpm:1005 ntsysv-1.2.17-1.i386.rpm:1005
Ntsysv provides a simple interface for setting which system services\n
are started or stopped in various runlevels (instead of directly\n
manipulating the numerous symbolic links in /etc/rc.d). Unless you\n
specify a runlevel or runlevels on the command line (see the man\n
page), ntsysv configures the current runlevel (5 if you're using X).
ntsysv 시스템 런레벨(runlevel;유닉스 운영체제의 동작 수준)에 따라서,\n
(/etc/rc.d 디렉토리 밑의 심볼릭 링크 직접 조작하는 대신에) \n
각종 서비스를 시작하거나 정지시키는 설정을 위한 인터페이스 입니다. \n
런레벨을 지정하지 않은 이상, ntsysv는 운영체제의 현재 런레벨(X 서버를 \n
사용하고 있다면 5)에서 서비스를 조작합니다.
Michelle Jiyeen Kim wrote:
이종상 wrote:
> 죄송합니다.
>
> 너무 늦었습니다.
>
>
>
> 번역자는 Ashuaria Lee 로 해 주세요.
>
>
>
> 수고들 하세요.
>
>
>
> 혹 잘못 된곳이 있으면 수정 부탁 드립니다.
>
>
>
>
>
앗 감사합니다.
그렇지 않아도 연락이 안오셔서 걱정하고 있었는데
그러면 이종상 님 덕분에 이제 5개만 남았네요 시간 잘 맞춰서 보내주셨어요
바로 올리겠습니다
1)
# ========================================================
#: nss_db-2.1.92-1.src.rpm:1005 nss_db-compat-2.1.92-1.i386.rpm:1005
Nss_db-compat is a set of C library extensions which allow Berkeley\n
Databases to be used as a primary source of aliases, ethers, groups,\n
hosts, networks, protocol, users, RPCs, services, and shadow passwords\n
(instead of or in addition to using flat files or NIS) from programs\n
linked against glibc 2.0.x.
2)
# ========================================================
#: nss_ldap-123-4.i386.rpm:1005 nss_ldap-123-4.src.rpm:1005
This package includes two LDAP access clients: nss_ldap and pam_ldap.\n
Nss_ldap is a set of C library extensions that allow X.500 and LDAP\n
directory servers to be used as a primary source of aliases, ethers,\n
groups, hosts, networks, protocol, users, RPCs, services, and shadow\n
passwords (instead of or in addition to using flat files or NIS).\n
\n
Pam_ldap is a module for Linux-PAM that supports password changes, V2\n
clients, Netscape's SSL, ypldapd, Netscape Directory Server password\n
policies, access authorization, and crypted hashes.
3)
# ========================================================
#: ntp-4.0.99k-4.i386.rpm:1005 ntp-4.0.99k-4.src.rpm:1005
The Network Time Protocol (NTP) is used to synchronize a computer's\n
time with another reference time source. The ntp package contains\n
utilities and daemons that will synchronize your computer's time to\n
Coordinated Universal Time (UTC) via the NTP protocol and NTP servers.\n
The ntp package includes ntpdate (a program for retrieving the date\n
and time from remote machines via a network) and ntpd (a daemon which\n
continuously adjusts system time).\n
\n
Install the ntp package if you need tools for keeping your system's\n
time synchronized via the NTP protocol.
4)
# ========================================================
#: chkconfig-1.2.17-1.src.rpm:1005 ntsysv-1.2.17-1.i386.rpm:1005
Ntsysv provides a simple interface for setting which system services\n
are started or stopped in various runlevels (instead of directly\n
manipulating the numerous symbolic links in /etc/rc.d). Unless you\n
specify a runlevel or runlevels on the command line (see the man\n
page), ntsysv configures the current runlevel (5 if you're using X).
5)
# ========================================================
#: nut-0.44.1-1.i386.rpm:1005 nut-0.44.1-1.src.rpm:1005
NUT (Network UPS Tools) provides programs for monitoring various\n
Uninterruptible Power Supply (UPS) devices. Many models of UPS have\n
serial ports that allow some form of state checking. This capability\n
has been harnessed, when possible, to allow for safe shutdowns, live\n
status tracking on webpages, and other capabilities. The nut-cgi\n
package contains the CGI programs needed for checking a UPS' status\n
via a Web browser.
------------------------------------------------------------------------
--
Fedora-trans-ko mailing list
Fedora-trans-ko(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-trans-ko