5:36 p.m.
On 02/21/13 10:39, Matthew Miller wrote:
On Wed, Feb 20, 2013 at 07:16:08PM -0600, Ranjan Maitra wrote:
> I was wondering if it is possible to download a spec file using yum
> or rpm only (without downloading the rpm)?
No, but there's a better way! All of our spec files are available in git,
and the "fedpkg" command is a nice wrapper around access to the repository.
So:
$ sudo yum install fedpkg
[...]
$ fedpkg clone firefox
Cloning into 'firefox'...
remote: Counting objects: 3234, done.
remote: Compressing objects: 100% (1979/1979), done.
remote: Total 3234 (delta 1702), reused 2424 (delta 1210)
Receiving objects: 100% (3234/3234), 741.50 KiB | 313 KiB/s, done.
Resolving deltas: 100% (1702/1702), done.
[…]
fedpkg --user poma -v clone firefox
Cloning ssh://poma@pkgs.fedoraproject.org/firefox
Running git clone ssh://poma@pkgs.fedoraproject.org/firefox directly on
the tty
Cloning into 'firefox'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Could not execute clone: Command '['git', 'clone',
'ssh://poma@pkgs.fedoraproject.org/firefox']' returned non-zero exit
status 128
--
In contrast:
fedpkg -v clone -a firefox
Cloning git://pkgs.fedoraproject.org/firefox
Running git clone git://pkgs.fedoraproject.org/firefox directly on the tty
Cloning into 'firefox'...
remote: Counting objects: 3234, done.
remote: Compressing objects: 100% (1979/1979), done.
remote: Total 3234 (delta 1704), reused 2424 (delta 1210)
Receiving objects: 100% (3234/3234), 708.87 KiB | 372 KiB/s, done.
Resolving deltas: 100% (1704/1704), done.
--
Shouldn't the default be an '-a'(anonymous) check out via git?
Cheers,
poma
6:21 p.m.
New subject: is it possible to download a spec file only using yum?
On Thu, Feb 21, 2013 at 6:36 PM, poma wrote:
Shouldn't the default be an '-a'(anonymous) check out via git?
I think it should too. Maybe there are good reasons behind not making so.
Meanwhile you can do
$ yumdownloader --source pkgname
$ deco pkgname*.src.rpm
This should get you the package source contents.
Orcan
6:40 p.m.
New subject: is it possible to download a spec file only using yum?
在 2013-2-22 AM8:22，"Orcan Ogetbil" <oget.fedora(a)gmail.xn--com>:-0s6m5392c
On Thu, Feb 21, 2013 at 6:36 PM, poma wrote:
>
> Shouldn't the default be an '-a'(anonymous) check out via git?
>
I think it should too. Maybe there are good reasons behind not making so.
Meanwhile you can do
$ yumdownloader --source pkgname
$ deco pkgname*.src.rpm
This should get you the package source contents.
That would be nice.
If I want to get a spec file and git clone a lot of things.... Damn...
7 p.m.
New subject: is it possible to download a spec file only using yum?
On 02/22/13 01:21, Orcan Ogetbil wrote:
On Thu, Feb 21, 2013 at 6:36 PM, poma wrote:
>
> Shouldn't the default be an '-a'(anonymous) check out via git?
>
I think it should too. Maybe there are good reasons behind not making so.
Meanwhile you can do
$ yumdownloader --source pkgname
$ deco pkgname*.src.rpm
This should get you the package source contents.
Orcan
deco grub2-2.00-16.fc19.src.rpm
13020 blocks
*** glibc detected *** deco: free(): invalid pointer: 0x00000031a9610a28 ***
======= Backtrace: =========
/lib64/libc.so.6[0x31a967ca8e]
deco[0x4017f1]
deco[0x400ed5]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x31a9621a05]
deco[0x400f8d]
======= Memory map: ========
00400000-00404000 r-xp 00000000 09:1e 1454894
/usr/bin/deco
00603000-00604000 r--p 00003000 09:1e 1454894
/usr/bin/deco
00604000-00605000 rw-p 00004000 09:1e 1454894
/usr/bin/deco
006c0000-00702000 rw-p 00000000 00:00 0
[heap]
31a9200000-31a9220000 r-xp 00000000 09:1e 1446220
/usr/lib64/ld-2.16.so
31a9420000-31a9421000 r--p 00020000 09:1e 1446220
/usr/lib64/ld-2.16.so
31a9421000-31a9422000 rw-p 00021000 09:1e 1446220
/usr/lib64/ld-2.16.so
31a9422000-31a9423000 rw-p 00000000 00:00 0
31a9600000-31a97ad000 r-xp 00000000 09:1e 1446243
/usr/lib64/libc-2.16.so
31a97ad000-31a99ad000 ---p 001ad000 09:1e 1446243
/usr/lib64/libc-2.16.so
31a99ad000-31a99b1000 r--p 001ad000 09:1e 1446243
/usr/lib64/libc-2.16.so
31a99b1000-31a99b3000 rw-p 001b1000 09:1e 1446243
/usr/lib64/libc-2.16.so
31a99b3000-31a99b8000 rw-p 00000000 00:00 0
31aaa00000-31aaa15000 r-xp 00000000 09:1e 1446693
/usr/lib64/libgcc_s-4.7.2-20121109.so.1
31aaa15000-31aac14000 ---p 00015000 09:1e 1446693
/usr/lib64/libgcc_s-4.7.2-20121109.so.1
31aac14000-31aac15000 r--p 00014000 09:1e 1446693
/usr/lib64/libgcc_s-4.7.2-20121109.so.1
31aac15000-31aac16000 rw-p 00015000 09:1e 1446693
/usr/lib64/libgcc_s-4.7.2-20121109.so.1
7fe5999bd000-7fe5999c0000 rw-p 00000000 00:00 0
7fe599a1b000-7fe599a1d000 rw-p 00000000 00:00 0
7fffa266e000-7fffa268f000 rw-p 00000000 00:00 0
[stack]
7fffa269a000-7fffa269c000 r-xp 00000000 00:00 0
[vdso]
ffffffffff600000-ffffffffff601000 r-xp 00000000 00:00 0
[vsyscall]
Aborted
--
Although the extraction is successful, checksums are OK. :)
Thanks for pointing out an additional tool(deco) for such a task.
Total so far: rpm2cpio/cpio, rpmdev-extract, deco and direct download
method via the fedpkg.
Nice. :)
Cheers,
poma
9:45 p.m.
New subject: is it possible to download a spec file only using yum?
On Thu, Feb 21, 2013 at 8:00 PM, poma wrote:
deco grub2-2.00-16.fc19.src.rpm
13020 blocks
[backtrace cut]
Aborted
--
Hmm, the crash does not happen here. How reproducible is this? Can you debug?
Although the extraction is successful, checksums are OK. :)
Thanks for pointing out an additional tool(deco) for such a task.
Total so far: rpm2cpio/cpio, rpmdev-extract, deco and direct download
method via the fedpkg.
Just as a side information; deco is a nice cute tool that is a wrapper
around other extractors so you don't need to memorize their syntax. In
case of rpm it wraps rpm2cpio.
Cheers,
Orcan
3:03 a.m.
New subject: is it possible to download a spec file only using yum?
On 02/23/13 04:45, Orcan Ogetbil wrote:
On Thu, Feb 21, 2013 at 8:00 PM, poma wrote:
> deco grub2-2.00-16.fc19.src.rpm
> 13020 blocks
[backtrace cut]
> Aborted
> --
Hmm, the crash does not happen here. How reproducible is this? Can you debug?
Installed from source - PREFIX = /usr
deco -v deco-archive-1.5.1-5.fc19.src.rpm deco-1.6.2-5.fc19.src.rpm
deco-archive-1.5.1.tar.gz
deco-archive-ape.diff
deco-archive-shn.diff
deco-archive-zoo.diff
deco-archive.spec
27 blocks
deco-archive-1.5.1-5.fc19.src/
deco-1.6.2.tar.gz
deco.spec
30 blocks
deco-1.6.2-5.fc19.src/
Just as a side information; deco is a nice cute tool that is a
wrapper
around other extractors so you don't need to memorize their syntax. In
case of rpm it wraps rpm2cpio.
Yep.
/usr/share/deco/rpm/extract
#!/bin/sh
…
rpm2cpio "$1" | cpio -idmu${Verbose+v}
--
/usr/share/deco/rpm/subdirectory: empty!?
deco-archive.spec is unnecessarily complicated.
Someone likes the scripting.
Cheers,
poma
3:19 a.m.
New subject: is it possible to download a spec file only using yum?
On Fri, Feb 22, 2013 at 12:36:43AM +0100, poma wrote:
Shouldn't the default be an '-a'(anonymous) check out via
git?
Whoops, sorry; forgot about that. I don't think the default should change
since, since I think the most common use is active Fedora contributors. If
you find yourself using this a lot, you may want to see what you can do to
be included in that set if you're not already. :)
--
Matthew Miller ☁☁☁ Fedora Cloud Architect ☁☁☁ <mattdm(a)fedoraproject.org>
8:12 a.m.
New subject: is it possible to download a spec file only using yum?
If all you want is the spec file, then this probably the easiest way:
$ wget http://pkgs.fedoraproject.org/cgit/firefox.git/plain/firefox.spec
However, this way you miss patches, and other auxiliary files.
- Thomas
9:18 a.m.
New subject: is it possible to download a spec file only using yum?
On 02/22/13 10:19, Matthew Miller wrote:
On Fri, Feb 22, 2013 at 12:36:43AM +0100, poma wrote:
> Shouldn't the default be an '-a'(anonymous) check out via git?
Whoops, sorry; forgot about that. I don't think the default should change
since, since I think the most common use is active Fedora contributors. If
you find yourself using this a lot, you may want to see what you can do to
be included in that set if you're not already. :)
It occurred to me, given that this is actually a development, namely
collaborative tool, among others. ;)
Cheers,
poma
10:25 p.m.
New subject: is it possible to download a spec file only using yum?
On Sex, 2013-02-22 at 00:36 +0100, poma wrote:
On 02/21/13 10:39, Matthew Miller wrote:
> On Wed, Feb 20, 2013 at 07:16:08PM -0600, Ranjan Maitra wrote:
>> I was wondering if it is possible to download a spec file using yum
>> or rpm only (without downloading the rpm)?
>
> No, but there's a better way! All of our spec files are available in git,
> and the "fedpkg" command is a nice wrapper around access to the
repository.
> So:
>
> $ sudo yum install fedpkg
> [...]
> $ fedpkg clone firefox
> Cloning into 'firefox'...
> remote: Counting objects: 3234, done.
> remote: Compressing objects: 100% (1979/1979), done.
> remote: Total 3234 (delta 1702), reused 2424 (delta 1210)
> Receiving objects: 100% (3234/3234), 741.50 KiB | 313 KiB/s, done.
> Resolving deltas: 100% (1702/1702), done.
[…]
fedpkg --user poma -v clone firefox
Cloning ssh://poma@pkgs.fedoraproject.org/firefox
Running git clone ssh://poma@pkgs.fedoraproject.org/firefox directly on
the tty
Cloning into 'firefox'...
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
Could not execute clone: Command '['git', 'clone',
'ssh://poma@pkgs.fedoraproject.org/firefox']' returned non-zero exit
status 128
--
In contrast:
fedpkg -v clone -a firefox
Cloning git://pkgs.fedoraproject.org/firefox
Running git clone git://pkgs.fedoraproject.org/firefox directly on the tty
Cloning into 'firefox'...
remote: Counting objects: 3234, done.
remote: Compressing objects: 100% (1979/1979), done.
remote: Total 3234 (delta 1704), reused 2424 (delta 1210)
Receiving objects: 100% (3234/3234), 708.87 KiB | 372 KiB/s, done.
Resolving deltas: 100% (1704/1704), done.
--
Shouldn't the default be an '-a'(anonymous) check out via git?
That's a point.
I got message "Xould not read Fedora cert, falling back to default
method"
default method should be anonymous.
we need to open a bug report
--
Sérgio M. B.
7:11 p.m.
New subject: is it possible to download a spec file only using yum?
On 02/23/13 05:25, Sérgio Basto wrote:
[…]
That's a point.
I got message "Xould not read Fedora cert, falling back to default
method"
default method should be anonymous.
we need to open a bug report
Déjà vu. ;)
https://bugzilla.redhat.com/show_bug.cgi?id=670485
Cheers,
poma
4089
days inactive
4092
days old
10 comments
6 participants
participants (6)
-
Christopher Meng -
Matthew Miller -
Orcan Ogetbil -
poma -
Sérgio Basto -
Thomas Moschny