10:03 p.m.
Would it be possible to list the iso file size in bytes in the SHA1SUM file?
The reason that I ask it is that I had a DVD with Fedora 7 on it and needed
a copy of the iso file. So I did a dd on the DVD, but the file ended up
being bigger than the original iso file. I had to know the size so I could
enter the number of blocks to copy.
It is much quicker to do an ls -l than it is to run sha1sum on a file.
If the size is right then run the sha1sum.
Or is the size listed on some web page some place?
Everywhere I have looked I end up with an estimate.
Thanks!
Jerry
10:29 p.m.
On Wed, Oct 24, 2007 at 09:03:45PM -0600, Jerry Williams wrote:
Would it be possible to list the iso file size in bytes in the
SHA1SUM file?
The reason that I ask it is that I had a DVD with Fedora 7 on it and needed
a copy of the iso file. So I did a dd on the DVD, but the file ended up
being bigger than the original iso file. I had to know the size so I could
enter the number of blocks to copy.
It is much quicker to do an ls -l than it is to run sha1sum on a file.
If the size is right then run the sha1sum.
Or is the size listed on some web page some place?
Everywhere I have looked I end up with an estimate.
When reading a the file itself with isoinfo, it'll tell you:
$ isoinfo -d -i F-7-x86_64-DVD.iso
...
Logical block size is: 2048
Volume size is: 1683582
...
If you're reading a physical CD or DVD, you can do the same thing.
Here's a little script I use all the time for getting the size right.
It prompts you for the name of the ISO you want to create, then reads
the media using dd; repeat until Ctrl-C.
IIRC there was something about using -pad when writing media, but I
haven't had to do that for a while...
Thanks,
Matt
--
Matt Domsch
Linux Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux
#!/bin/bash
DEVICE=/dev/cdrom
let i=0
while [ 1 ]; do
echo "Please insert a disc. What do you want it named?"
read FILENAME
BLOCKS=`isoinfo -d -i ${DEVICE} | grep "Volume size" | awk '{print
$4}'`
dd if=${DEVICE} of=${FILENAME} bs=2k count=${BLOCKS}
md5sum ${FILENAME}
done
10:44 p.m.
On Wed, 2007-10-24 at 22:29 -0500, Matt Domsch wrote:
On Wed, Oct 24, 2007 at 09:03:45PM -0600, Jerry Williams wrote:
> Would it be possible to list the iso file size in bytes in the SHA1SUM file?
>
> The reason that I ask it is that I had a DVD with Fedora 7 on it and needed
> a copy of the iso file. So I did a dd on the DVD, but the file ended up
> being bigger than the original iso file. I had to know the size so I could
> enter the number of blocks to copy.
>
> It is much quicker to do an ls -l than it is to run sha1sum on a file.
> If the size is right then run the sha1sum.
>
> Or is the size listed on some web page some place?
> Everywhere I have looked I end up with an estimate.
When reading a the file itself with isoinfo, it'll tell you:
$ isoinfo -d -i F-7-x86_64-DVD.iso
...
Logical block size is: 2048
Volume size is: 1683582
...
Right, but I think what he's saying is that he *didn't* have the ISO
file to hand - but did have a DVD he could dd from - and he wanted a way
to find out how big the image should have been without downloading it.
Jon.
10:55 p.m.
Jon Masters wrote:
Right, but I think what he's saying is that he *didn't* have
the ISO
file to hand - but did have a DVD he could dd from - and he wanted a
way to find out how big the image should have been without
downloading it.
And the very next part of Matt's mail said:
If you're reading a physical CD or DVD, you can do the same
thing.
Here's a little script I use all the time for getting the size
right. It prompts you for the name of the ISO you want to create,
then reads the media using dd; repeat until Ctrl-C.
He even provided a short script to do the job. You can't be much more
helpful than that. ;)
--
Todd OpenPGP -> KeyID: 0xBEAF0CE3 | URL: www.pobox.com/~tmz/pgp
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You're not drunk if you can lie on the floor without holding on.
-- Dean Martin
10:56 p.m.
On Wed, Oct 24, 2007 at 11:44:08PM -0400, Jon Masters wrote:
Right, but I think what he's saying is that he *didn't* have the ISO
file to hand - but did have a DVD he could dd from - and he wanted a way
to find out how big the image should have been without downloading it.
Go to bed Jon, you didn't read far enough. :-) You would have seen
the appended script do:
BLOCKS=`isoinfo -d -i ${DEVICE} | grep "Volume size" | awk '{print
$4}'`
dd if=${DEVICE} of=${FILENAME} bs=2k count=${BLOCKS}
where DEVICE=/dev/cdrom or whatever device had the media.
--
Matt Domsch
Linux Technology Strategist, Dell Office of the CTO
linux.dell.com & www.dell.com/linux
12:08 a.m.
On Wed, 2007-10-24 at 22:56 -0500, Matt Domsch wrote:
On Wed, Oct 24, 2007 at 11:44:08PM -0400, Jon Masters wrote:
>
> Right, but I think what he's saying is that he *didn't* have the ISO
> file to hand - but did have a DVD he could dd from - and he wanted a way
> to find out how big the image should have been without downloading it.
Go to bed Jon, you didn't read far enough. :-) You would have seen
the appended script do:
BLOCKS=`isoinfo -d -i ${DEVICE} | grep "Volume size" | awk '{print
$4}'`
dd if=${DEVICE} of=${FILENAME} bs=2k count=${BLOCKS}
where DEVICE=/dev/cdrom or whatever device had the media.
Yeah. I suck. Too much Red Sox and coffee, not enough reading...sorry
Matt - sooner or later I'll learn :-)
Jon.
12:14 a.m.
On Wed, 2007-10-24 at 22:29 -0500, Matt Domsch wrote:
If you're reading a physical CD or DVD, you can do the same
thing.
Here's a little script I use all the time for getting the size right.
It prompts you for the name of the ISO you want to create, then reads
the media using dd; repeat until Ctrl-C.
Right. But if you end up reading more from the disk than you planned,
this will only flag that up (the MD5SUM generated) - it won't tell you
what it should be. So my point from before is somehow semi valid ;-)
IIRC there was something about using -pad when writing media, but I
haven't had to do that for a while...
It's down to the size of the ISO image. I haven't had to use pad in a
while, which suggests that most of the ISOs are created in the right
multiples of 2.whatever K or tools like growisofs are handling it.
CDs are fascinating little things. I've got a book on the multiple stage
error correction process somewhere here I used to use for bedtime
reading...these days, coffee is all that's required.
Jon.
12:19 a.m.
On Thu, 2007-10-25 at 01:14 -0400, Jon Masters wrote:
On Wed, 2007-10-24 at 22:29 -0500, Matt Domsch wrote:
> If you're reading a physical CD or DVD, you can do the same thing.
> Here's a little script I use all the time for getting the size right.
> It prompts you for the name of the ISO you want to create, then reads
> the media using dd; repeat until Ctrl-C.
Right. But if you end up reading more from the disk than you planned,
this will only flag that up (the MD5SUM generated) - it won't tell you
what it should be. So my point from before is somehow semi valid ;-)
No, I'm wrong, because isoinfo is going to get that from the TOC. So
clearly I'm way too Red Soxed for one evening and should just shut up.
Ignore me... :-)
Jon.
1:13 p.m.
At 10:29 PM -0500 10/24/07, Matt Domsch wrote:
On Wed, Oct 24, 2007 at 09:03:45PM -0600, Jerry Williams wrote:
> Would it be possible to list the iso file size in bytes in the SHA1SUM file?
>
> The reason that I ask it is that I had a DVD with Fedora 7 on it and needed
> a copy of the iso file. So I did a dd on the DVD, but the file ended up
> being bigger than the original iso file. I had to know the size so I could
> enter the number of blocks to copy.
>
> It is much quicker to do an ls -l than it is to run sha1sum on a file.
> If the size is right then run the sha1sum.
>
> Or is the size listed on some web page some place?
> Everywhere I have looked I end up with an estimate.
When reading a the file itself with isoinfo, it'll tell you:
$ isoinfo -d -i F-7-x86_64-DVD.iso
...
Logical block size is: 2048
Volume size is: 1683582
...
I find isosize less AWKward, as it puts out the size directly and will also
do the math:
$ isosize Fedora-7.92-i386-DVD.iso
3000535040
$ isosize -d 2048 Fedora-7.92-i386-DVD.iso
1465105
--
____________________________________________________________________
TonyN.:' <mailto:tonynelson@georgeanelson.com>
' <http://www.georgeanelson.com/>
6053
days inactive
6053
days old
8 comments
5 participants
participants (5)
-
Jerry Williams -
Jon Masters -
Matt Domsch -
Todd Zullinger -
Tony Nelson