5 a.m.
Kernel Panic Error and got demsg and shows like this. Can any one tell any
issues with my machine
Warning: dmesg info
Linux version 2.6.17-1.2187_FC5smp (brewbuilder(a)hs20-bc2-2.build.redhat.com)
(gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon Sep 11 01:32:34
EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000330000000 (usable)
12160MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 3342336
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 3112961 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 DELL ) @ 0x000f2a00
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2a80
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2b88
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2c7c
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2d5d
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2dad
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2de5
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[160])
IOAPIC[2]: apic_id 10, version 32, address 0xfec84000, GSI 160-183
ACPI: IOAPIC (id[0x0b] address[0xfec84800] gsi_base[224])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84800, GSI 224-247
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 4 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec81000)
mapped IOAPIC to ffffa000 (fec84000)
mapped IOAPIC to ffff9000 (fec84800)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ae000 soft=c078e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 12470348k/13369344k available (2154k kernel code, 111092k reserved,
1200k data, 244k init, 11665060k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2992.672 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5990.85 BogoMIPS
(lpj=11981719)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07af000 soft=c078f000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.08 BogoMIPS
(lpj=11970169)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c07b0000 soft=c0790000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5985.34 BogoMIPS
(lpj=11970685)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c07b1000 soft=c0791000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5985.34 BogoMIPS
(lpj=11970694)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 4/4 eip 3000
CPU 4 irqstacks, hard=c07b2000 soft=c0792000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5985.21 BogoMIPS
(lpj=11970424)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
CPU4: Thermal monitoring enabled
CPU4: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 5/5 eip 3000
CPU 5 irqstacks, hard=c07b3000 soft=c0793000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5985.27 BogoMIPS
(lpj=11970541)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
CPU5: Thermal monitoring enabled
CPU5: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 6/6 eip 3000
CPU 6 irqstacks, hard=c07b4000 soft=c0794000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5985.38 BogoMIPS
(lpj=11970763)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
CPU6: Thermal monitoring enabled
CPU6: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 7/7 eip 3000
CPU 7 irqstacks, hard=c07b5000 soft=c0795000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5985.21 BogoMIPS
(lpj=11970432)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
CPU7: Thermal monitoring enabled
CPU7: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
Total of 8 processors activated (47887.71 BogoMIPS).
ENABLING IO-APIC IRQs
.TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
migration_cost=8000,8000
checking if image is initramfs... it is
Freeing initrd memory: 1078k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:11:0d.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._
PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:08: ioport range 0x800-0x87f could not be reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca9-0xcab has been reserved
pnp: 00:08: ioport range 0xcad-0xcaf has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:06:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: f2000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.0
IO window: e000-efff
MEM window: fc500000-fc6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: e000-efff
MEM window: fc400000-fc6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: fc300000-fc3fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fc100000-fc2fffff
PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:01.0 to 64
PCI: Setting latency timer of device 0000:05:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1361778047.676:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9E8FFDD49649098E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
Allocate Port Service[0000:05:00.0:pcie10]
Allocate Port Service[0000:05:00.0:pcie11]
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:06:00.0:pcie20]
Allocate Port Service[0000:06:00.0:pcie21]
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:06:01.0:pcie20]
Allocate Port Service[0000:06:01.0:pcie21]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 244k freed
Write protecting the kernel read-only data: 723k
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
SCSI subsystem initialized
Fusion MPT SAS Host driver 3.03.09
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 64 (level, low) -> IRQ 66
mptbase: Initiating ioc0 bringup
ioc0: SAS1068: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1068, FwRev=00062800h, Ports=1, MaxQ=511, IRQ=66
Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
sda: Write Protect is off
sda: Mode Sense: 67 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
sda: Write Protect is off
sda: Mode Sense: 67 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 67 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 67 00 00 08
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 0:1:1:0: Attached scsi disk sdb
Vendor: ATA Model: WDC WD1600YS-18S Rev: 6C07
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 67 00 00 08
SCSI device sdc: drive cache: write back
SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 67 00 00 08
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 0:2:2:0: Attached scsi disk sdc
Vendor: ATA Model: WDC WD5002ABYS-1 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 67 00 00 08
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 67 00 00 08
SCSI device sdd: drive cache: write back
sdd: sdd1
sd 0:3:3:0: Attached scsi disk sdd
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xCC98 ctl 0xCC92 bmdma 0xCC60 irq 74
ata2: SATA max UDMA/133 cmd 0xCC80 ctl 0xCC7A bmdma 0xCC68 irq 74
ata1: SATA port has no device.
scsi1 : ata_piix
ata2: SATA port has no device.
scsi2 : ata_piix
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1361778055.056:2): selinux=0 auid=4294967295
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 82, io base 0x0000cce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 90, io base 0x0000ccc0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:1:1:0: Attached scsi generic sg1 type 0
sd 0:2:2:0: Attached scsi generic sg2 type 0
sd 0:3:3:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 82, io base 0x0000cca0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 82, io mem 0xfc700400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.40 (May 22, 2006)
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz
found at mem f4000000, IRQ 169, node addr 00188b321042
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz
found at mem f8000000, IRQ 169, node addr 00188b321040
usb 4-1: new high speed USB device using ehci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 2 ports detected
usb 4-5: new high speed USB device using ehci_hcd and address 3
usb 4-5: configuration #1 chosen from 1 choice
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 4-1.1: new full speed USB device using ehci_hcd and address 4
usb 4-1.1: configuration #1 chosen from 1 choice
input: Dell DRAC5 as /class/input/input0
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: Dell DRAC5 as /class/input/input1
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
usb 4-1.2: new high speed USB device using ehci_hcd and address 5
usb 4-1.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel(a)redhat.com
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 00
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 00
3:0:0:0: Attached scsi generic sg4 type 5
usb-storage: device scan complete
sd 4:0:0:0: Attached scsi removable disk sde
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sr0: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr0
Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
Adding 2048276k swap on /dev/sda3. Priority:-2 extents:1 across:2048276k
bnx2: eth0: using MSI
bnx2: eth0 NIC Link is Up, 100 Mbps full duplex
bnx2: eth1: using MSI
bnx2: eth1 NIC Link is Up, 100 Mbps full duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
eth0: no IPv6 routers present
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
5:09 a.m.
On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad
<didforsale5(a)gmail.com> wrote:
Kernel Panic Error and got demsg and shows like this. Can any one tell any issues with my
machine
Warning: dmesg info
Linux version 2.6.17-1.2187_FC5smp (brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc version
4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon
1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of
getting help are fairly slim.
2. You didn't include the actual kernel panic message or what you were
doing to trigger it. Without this information it's unlikely that
anyone here will be able to help you.
- Gilboa
5:14 a.m.
On Wed, Feb 27, 2013 at 1:09 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad
<didforsale5(a)gmail.com> wrote:
>
> Kernel Panic Error and got demsg and shows like this. Can any one tell any issues
with my machine
>
> Warning: dmesg info
> Linux version 2.6.17-1.2187_FC5smp (brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc
version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon
1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of
getting help are fairly slim.
2. You didn't include the actual kernel panic message or what you were
doing to trigger it. Without this information it's unlikely that
anyone here will be able to help you.
- Gilboa
Saw oops message in the another message. Its looks like a network
device related crash - possibly hardware related (its very hard to
tell).
What's the machine hardware configuration?
Beyond that, can you upgrade (.....) the machine to something
maintained? In this case (given the apparent age of the hardware) RHEL
5.x or CentOS 5.x? Both should be more-or-less comparable to your
existing FC5 setup, but will carry many (!!!) stability and security
enhancement compared to your existing FC5 installation.
- Gilboa
5:20 a.m.
Dell poweedge 2900
Here is demessg
Warning: dmesg info
Linux version 2.6.17-1.2187_FC5smp (brewbuilder(a)hs20-bc2-2.build.redhat.com)
(gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 SMP Mon Sep 11 01:32:34
EDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 0000000000100000 - 00000000cffa8000 (usable)
BIOS-e820: 00000000cffa8000 - 00000000cffb7c00 (ACPI data)
BIOS-e820: 00000000cffb7c00 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000330000000 (usable)
12160MB HIGHMEM available.
895MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 3342336
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225279 pages, LIFO batch:31
HighMem zone: 3112961 pages, LIFO batch:31
DMI 2.4 present.
Using APIC driver default
ACPI: RSDP (v002 DELL ) @ 0x000f2a00
ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2a80
ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2b88
ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2c7c
ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2d5d
ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2dad
ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x000f2de5
ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
Processor #6 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
Processor #1 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
Processor #5 15:6 APIC version 20
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
Processor #7 15:6 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[160])
IOAPIC[2]: apic_id 10, version 32, address 0xfec84000, GSI 160-183
ACPI: IOAPIC (id[0x0b] address[0xfec84800] gsi_base[224])
IOAPIC[3]: apic_id 11, version 32, address 0xfec84800, GSI 224-247
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 4 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec81000)
mapped IOAPIC to ffffa000 (fec84000)
mapped IOAPIC to ffff9000 (fec84800)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07ae000 soft=c078e000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 12470348k/13369344k available (2154k kernel code, 111092k reserved,
1200k data, 244k init, 11665060k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2992.672 MHz processor.
Using hpet for high-res timesource
Calibrating delay using timer specific routine.. 5990.85 BogoMIPS
(lpj=11981719)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07af000 soft=c078f000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5985.08 BogoMIPS
(lpj=11970169)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 2/2 eip 3000
CPU 2 irqstacks, hard=c07b0000 soft=c0790000
Initializing CPU#2
Calibrating delay using timer specific routine.. 5985.34 BogoMIPS
(lpj=11970685)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
CPU2: Thermal monitoring enabled
CPU2: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 3/3 eip 3000
CPU 3 irqstacks, hard=c07b1000 soft=c0791000
Initializing CPU#3
Calibrating delay using timer specific routine.. 5985.34 BogoMIPS
(lpj=11970694)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
CPU3: Thermal monitoring enabled
CPU3: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 4/4 eip 3000
CPU 4 irqstacks, hard=c07b2000 soft=c0792000
Initializing CPU#4
Calibrating delay using timer specific routine.. 5985.21 BogoMIPS
(lpj=11970424)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
CPU4: Thermal monitoring enabled
CPU4: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 5/5 eip 3000
CPU 5 irqstacks, hard=c07b3000 soft=c0793000
Initializing CPU#5
Calibrating delay using timer specific routine.. 5985.27 BogoMIPS
(lpj=11970541)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
CPU5: Thermal monitoring enabled
CPU5: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 6/6 eip 3000
CPU 6 irqstacks, hard=c07b4000 soft=c0794000
Initializing CPU#6
Calibrating delay using timer specific routine.. 5985.38 BogoMIPS
(lpj=11970763)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
CPU6: Thermal monitoring enabled
CPU6: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
SMP alternatives: switching to SMP code
Booting processor 7/7 eip 3000
CPU 7 irqstacks, hard=c07b5000 soft=c0795000
Initializing CPU#7
Calibrating delay using timer specific routine.. 5985.21 BogoMIPS
(lpj=11970432)
CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000
0000e4bd 00000000 00000001
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e4bd
00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
CPU7: Thermal monitoring enabled
CPU7: Intel(R) Xeon(TM) CPU 3.00GHz stepping 04
Total of 8 processors activated (47887.71 BogoMIPS).
ENABLING IO-APIC IRQs
.TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 8 CPUs: passed.
Brought up 8 CPUs
migration_cost=8000,8000
checking if image is initramfs... it is
Freeing initrd memory: 1078k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:11:0d.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._
PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3.PE2P._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.PXHB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 *5 6 7 10 11 12)
ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12)
ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12)
ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:08: ioport range 0x800-0x87f could not be reserved
pnp: 00:08: ioport range 0x880-0x8bf has been reserved
pnp: 00:08: ioport range 0x8c0-0x8df has been reserved
pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved
pnp: 00:08: ioport range 0xc00-0xc7f has been reserved
pnp: 00:08: ioport range 0xca0-0xca7 has been reserved
pnp: 00:08: ioport range 0xca9-0xcab has been reserved
pnp: 00:08: ioport range 0xcad-0xcaf has been reserved
pnp: 00:09: ioport range 0xca8-0xca8 has been reserved
pnp: 00:09: ioport range 0xcac-0xcac has been reserved
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:06:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:06:01.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.0
IO window: disabled.
MEM window: f4000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:05:00.3
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: f2000000-f7ffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:01:00.0
IO window: e000-efff
MEM window: fc500000-fc6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:03.0
IO window: e000-efff
MEM window: fc400000-fc6fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:0d:00.2
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: fc300000-fc3fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:03:00.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: f8000000-fbffffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: d000-dfff
MEM window: fc100000-fc2fffff
PREFETCH window: d8000000-dfffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:01.0 to 64
PCI: Setting latency timer of device 0000:05:00.3 to 64
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
PCI: Setting latency timer of device 0000:01:00.0 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:0d:00.0 to 64
PCI: Setting latency timer of device 0000:0d:00.2 to 64
PCI: Setting latency timer of device 0000:00:07.0 to 64
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:03:00.0 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1361778047.676:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9E8FFDD49649098E
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:03.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:03.0:pcie00]
Allocate Port Service[0000:00:03.0:pcie01]
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
PCI: Setting latency timer of device 0000:00:05.0 to 64
pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:05.0:pcie00]
Allocate Port Service[0000:00:05.0:pcie01]
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
PCI: Setting latency timer of device 0000:00:07.0 to 64
pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:07.0:pcie00]
Allocate Port Service[0000:00:07.0:pcie01]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
Allocate Port Service[0000:05:00.0:pcie10]
Allocate Port Service[0000:05:00.0:pcie11]
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:06:00.0:pcie20]
Allocate Port Service[0000:06:00.0:pcie21]
ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:06:01.0:pcie20]
Allocate Port Service[0000:06:01.0:pcie21]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ESB2: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 169
ESB2: chipset revision 9
ESB2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: TEAC CD-ROM CD-224E-N, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 24X CD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI wakeup devices:
PCI0
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 244k freed
Write protecting the kernel read-only data: 723k
Fusion MPT base driver 3.03.09
Copyright (c) 1999-2005 LSI Logic Corporation
SCSI subsystem initialized
Fusion MPT SAS Host driver 3.03.09
ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 64 (level, low) -> IRQ 66
mptbase: Initiating ioc0 bringup
ioc0: SAS1068: Capabilities={Initiator}
scsi0 : ioc0: LSISAS1068, FwRev=00062800h, Ports=1, MaxQ=511, IRQ=66
Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
sda: Write Protect is off
sda: Mode Sense: 67 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 312500000 512-byte hdwr sectors (160000 MB)
sda: Write Protect is off
sda: Mode Sense: 67 00 00 08
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: WDC WD1600JS-75N Rev: 2E04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 67 00 00 08
SCSI device sdb: drive cache: write back
SCSI device sdb: 312500000 512-byte hdwr sectors (160000 MB)
sdb: Write Protect is off
sdb: Mode Sense: 67 00 00 08
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 0:1:1:0: Attached scsi disk sdb
Vendor: ATA Model: WDC WD1600YS-18S Rev: 6C07
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 67 00 00 08
SCSI device sdc: drive cache: write back
SCSI device sdc: 312500000 512-byte hdwr sectors (160000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 67 00 00 08
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 0:2:2:0: Attached scsi disk sdc
Vendor: ATA Model: WDC WD5002ABYS-1 Rev: 3B04
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 67 00 00 08
SCSI device sdd: drive cache: write back
SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
sdd: Write Protect is off
sdd: Mode Sense: 67 00 00 08
SCSI device sdd: drive cache: write back
sdd: sdd1
sd 0:3:3:0: Attached scsi disk sdd
libata version 1.20 loaded.
ata_piix 0000:00:1f.2: version 1.05
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 74
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xCC98 ctl 0xCC92 bmdma 0xCC60 irq 74
ata2: SATA max UDMA/133 cmd 0xCC80 ctl 0xCC7A bmdma 0xCC68 irq 74
ata1: SATA port has no device.
scsi1 : ata_piix
ata2: SATA port has no device.
scsi2 : ata_piix
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1361778055.056:2): selinux=0 auid=4294967295
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 82, io base 0x0000cce0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 90
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 90, io base 0x0000ccc0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:1:1:0: Attached scsi generic sg1 type 0
sd 0:2:2:0: Attached scsi generic sg2 type 0
sd 0:3:3:0: Attached scsi generic sg3 type 0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 82, io base 0x0000cca0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 82
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 82, io mem 0xfc700400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.40 (May 22, 2006)
ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz
found at mem f4000000, IRQ 169, node addr 00188b321042
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz
found at mem f8000000, IRQ 169, node addr 00188b321040
usb 4-1: new high speed USB device using ehci_hcd and address 2
usb 4-1: configuration #1 chosen from 1 choice
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 2 ports detected
usb 4-5: new high speed USB device using ehci_hcd and address 3
usb 4-5: configuration #1 chosen from 1 choice
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
usb 4-1.1: new full speed USB device using ehci_hcd and address 4
usb 4-1.1: configuration #1 chosen from 1 choice
input: Dell DRAC5 as /class/input/input0
input: USB HID v1.10 Keyboard [Dell DRAC5] on usb-0000:00:1d.7-1.1
input: Dell DRAC5 as /class/input/input1
input: USB HID v1.10 Mouse [Dell DRAC5] on usb-0000:00:1d.7-1.1
usb 4-1.2: new high speed USB device using ehci_hcd and address 5
usb 4-1.2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel(a)redhat.com
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdc1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdd1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Vendor: Dell Model: Virtual CDROM Rev: 123
Type: CD-ROM ANSI SCSI revision: 00
Vendor: Dell Model: Virtual Floppy Rev: 123
Type: Direct-Access ANSI SCSI revision: 00
3:0:0:0: Attached scsi generic sg4 type 5
usb-storage: device scan complete
sd 4:0:0:0: Attached scsi removable disk sde
sd 4:0:0:0: Attached scsi generic sg5 type 0
usb-storage: device scan complete
sr0: scsi-1 drive
sr 3:0:0:0: Attached scsi CD-ROM sr0
Adding 2048276k swap on /dev/sda2. Priority:-1 extents:1 across:2048276k
Adding 2048276k swap on /dev/sda3. Priority:-2 extents:1 across:2048276k
bnx2: eth0: using MSI
bnx2: eth0 NIC Link is Up, 100 Mbps full duplex
bnx2: eth1: using MSI
bnx2: eth1 NIC Link is Up, 100 Mbps full duplex
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
eth0: no IPv6 routers present
Bluetooth: Core ver 2.8
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.7
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
i2c /dev entries driver
On Wed, Feb 27, 2013 at 4:44 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
On Wed, Feb 27, 2013 at 1:09 PM, Gilboa Davara
<gilboad(a)gmail.com> wrote:
> On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad
> <didforsale5(a)gmail.com> wrote:
>>
>> Kernel Panic Error and got demsg and shows like this. Can any one tell
any issues with my machine
>>
>> Warning: dmesg info
>> Linux version 2.6.17-1.2187_FC5smp (
brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20060525 (Red
Hat 4.1.1-1)) #1 SMP Mon
>
> 1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of
> getting help are fairly slim.
> 2. You didn't include the actual kernel panic message or what you were
> doing to trigger it. Without this information it's unlikely that
> anyone here will be able to help you.
>
> - Gilboa
Saw oops message in the another message. Its looks like a network
device related crash - possibly hardware related (its very hard to
tell).
What's the machine hardware configuration?
Beyond that, can you upgrade (.....) the machine to something
maintained? In this case (given the apparent age of the hardware) RHEL
5.x or CentOS 5.x? Both should be more-or-less comparable to your
existing FC5 setup, but will carry many (!!!) stability and security
enhancement compared to your existing FC5 installation.
- Gilboa
--
devel mailing list
devel(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
5:27 a.m.
On Wed, Feb 27, 2013 at 1:20 PM, Darin Vivekananad
<didforsale5(a)gmail.com> wrote:
Dell poweedge 2900
Its an old machine running a very old and unsupported version of Linux.
How frequent are these crashes? Once in while? every reboot?
As far as I remember, back in the day the bnx drivers was somewhat
short tempered - that of-course, assuming that your old hardware isn't
failing (E.g. mother board, memory, etc)
The only way to be sure it's not a hardware related issue is to:
1. Run memtest.
2. Switch to a supported OS such as CentOS 5.8.
- Gilboa
5:43 a.m.
I had it only once and after few reboots it worked. But I need to sort this
and I am sure its not because of old hardware support with fedora. Now
issues is resolved and I just need to know why it caused that error once.
What do you think?
On Wed, Feb 27, 2013 at 4:57 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
On Wed, Feb 27, 2013 at 1:20 PM, Darin Vivekananad
<didforsale5(a)gmail.com> wrote:
> Dell poweedge 2900
Its an old machine running a very old and unsupported version of Linux.
How frequent are these crashes? Once in while? every reboot?
As far as I remember, back in the day the bnx drivers was somewhat
short tempered - that of-course, assuming that your old hardware isn't
failing (E.g. mother board, memory, etc)
The only way to be sure it's not a hardware related issue is to:
1. Run memtest.
2. Switch to a supported OS such as CentOS 5.8.
- Gilboa
--
devel mailing list
devel(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
6:38 a.m.
Did you get the attachment I have sent
On Wed, Feb 27, 2013 at 5:13 PM, Darin Vivekananad <didforsale5(a)gmail.com>wrote:
I had it only once and after few reboots it worked. But I need to
sort
this and I am sure its not because of old hardware support with fedora. Now
issues is resolved and I just need to know why it caused that error once.
What do you think?
On Wed, Feb 27, 2013 at 4:57 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
> On Wed, Feb 27, 2013 at 1:20 PM, Darin Vivekananad
> <didforsale5(a)gmail.com> wrote:
> > Dell poweedge 2900
>
> Its an old machine running a very old and unsupported version of Linux.
> How frequent are these crashes? Once in while? every reboot?
>
> As far as I remember, back in the day the bnx drivers was somewhat
> short tempered - that of-course, assuming that your old hardware isn't
> failing (E.g. mother board, memory, etc)
>
> The only way to be sure it's not a hardware related issue is to:
> 1. Run memtest.
> 2. Switch to a supported OS such as CentOS 5.8.
>
> - Gilboa
> --
> devel mailing list
> devel(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/devel
>
6:51 a.m.
On 27 February 2013 12:38, Darin Vivekananad <darin(a)didforsale.com> wrote:
Did you get the attachment I have sent
Considering this is the -devel list this shouldn't even really be here
anyway - the users list would be more appropriate...
As Gilboa already mentioned FC5 is well out of support in addition to this
- there are no updates (security, bugfixes, etc for this) so CentOS5 would
be far more appropriate from a software perspective and you really need to
carry out some hardware tests such as memtest.
7:46 a.m.
Is it related to NFS sharing as We lost connection for few minutes and then
its crashed. Any idea on NFS related panic error
On Wed, Feb 27, 2013 at 4:44 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
On Wed, Feb 27, 2013 at 1:09 PM, Gilboa Davara
<gilboad(a)gmail.com> wrote:
> On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad
> <didforsale5(a)gmail.com> wrote:
>>
>> Kernel Panic Error and got demsg and shows like this. Can any one tell
any issues with my machine
>>
>> Warning: dmesg info
>> Linux version 2.6.17-1.2187_FC5smp (
brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20060525 (Red
Hat 4.1.1-1)) #1 SMP Mon
>
> 1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of
> getting help are fairly slim.
> 2. You didn't include the actual kernel panic message or what you were
> doing to trigger it. Without this information it's unlikely that
> anyone here will be able to help you.
>
> - Gilboa
Saw oops message in the another message. Its looks like a network
device related crash - possibly hardware related (its very hard to
tell).
What's the machine hardware configuration?
Beyond that, can you upgrade (.....) the machine to something
maintained? In this case (given the apparent age of the hardware) RHEL
5.x or CentOS 5.x? Both should be more-or-less comparable to your
existing FC5 setup, but will carry many (!!!) stability and security
enhancement compared to your existing FC5 installation.
- Gilboa
--
devel mailing list
devel(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
10:48 a.m.
(Sorry for top posting - mobile)
Looking at the screenshot you sent it looks like network device driver
(bnx2) related crash.
Given how old both hardware and software are, there is no way of knowing
what was the root cause of this crash by looking at the screenshot.
Start by running memtest - if it passes without fault and you continue to
experience kernel crashes you should really replace Fedora with CentOS.
- Gilboa
Sent from my SGS2
On Feb 27, 2013 3:46 PM, "Darin Vivekananad" <darin(a)didforsale.com>
wrote:
Is it related to NFS sharing as We lost connection for few minutes
and
then its crashed. Any idea on NFS related panic error
On Wed, Feb 27, 2013 at 4:44 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
> On Wed, Feb 27, 2013 at 1:09 PM, Gilboa Davara <gilboad(a)gmail.com> wrote:
> > On Wed, Feb 27, 2013 at 1:00 PM, Darin Vivekananad
> > <didforsale5(a)gmail.com> wrote:
> >>
> >> Kernel Panic Error and got demsg and shows like this. Can any one tell
> any issues with my machine
> >>
> >> Warning: dmesg info
> >> Linux version 2.6.17-1.2187_FC5smp (
> brewbuilder(a)hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20060525
> (Red Hat 4.1.1-1)) #1 SMP Mon
> >
> > 1. Fedora Core 5 has been deprecate for ~6 years now. Your chances of
> > getting help are fairly slim.
> > 2. You didn't include the actual kernel panic message or what you were
> > doing to trigger it. Without this information it's unlikely that
> > anyone here will be able to help you.
> >
> > - Gilboa
>
> Saw oops message in the another message. Its looks like a network
> device related crash - possibly hardware related (its very hard to
> tell).
> What's the machine hardware configuration?
>
> Beyond that, can you upgrade (.....) the machine to something
> maintained? In this case (given the apparent age of the hardware) RHEL
> 5.x or CentOS 5.x? Both should be more-or-less comparable to your
> existing FC5 setup, but will carry many (!!!) stability and security
> enhancement compared to your existing FC5 installation.
>
> - Gilboa
> --
> devel mailing list
> devel(a)lists.fedoraproject.org
> https://admin.fedoraproject.org/mailman/listinfo/devel
>
--
devel mailing list
devel(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel
4080
days inactive
4080
days old
9 comments
4 participants
participants (4)
-
Darin Vivekananad -
Darin Vivekananad -
Gilboa Davara -
James Hogarth